Image not available
Illustrative purposes only
UHP-200-55
AC/DC Enclosed Power Supply (PSU), 127 to 370VDC, ITE, 1 Outputs, 201.6 W, 55 VDC, 3.6 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type: AC / DC Enclosed Power Supplies
- SVHC: No SVHC (25-Jun-2025)
- Product Range: UHP-200 Series
- No. of Outputs: 1Outputs
- Output Power Max: 201.6W
- Input Voltage VAC: 90V AC to 264V AC
- Power Supply Output Type: Adjustable, Fixed
- Output Current - Output 1: 3.6A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Current - Output 4: -
- Output Voltage - Output 1: 55VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 48.82 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## 200W Slim Type with PFC Switching Power Supply ## **UHP - 200 series** **==> picture [307 x 123] intentionally omitted <==** **----- Start of picture text -----**<br> BauarSicherheitbeegelodwacmat geprufto ges g<br>www.ID 2000000000tuv.com<br>Ceo W GB4943 UL62368 1- S EN62368-1EN60335-1 HCBCE IEC62368-1<br>■ Features ■<br>* Slim and Low profile (26mm) *<br>* Fanless design,200W convection *<br>* Withstand 300VAC surge input for 5 seconds *<br>* Built-in active PFC function *<br>* - 30 ~+ 70 ℃ working temperature<br>**----- End of picture text -----**<br> **==> picture [13 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> ■<br>**----- End of picture text -----**<br> **==> picture [180 x 212] intentionally omitted <==** **----- Start of picture text -----**<br> series operates from-30 ℃ ~70 ℃<br>protection functions and 5G<br>regulations such as TUV<br>serves as a high performance<br>■ Model Encoding<br>UHP- 200| |- 5|<br>~tE____<br>| Type |<br>|__| R Built-in DC OK active<br>**----- End of picture text -----**<br> _File Name:UHP-200-SPEC 2020-08-24_ ## 200W Slim Type with PFC Switching Power Supply ~~a~~ ## **UHP - 200 series** ## **SPECIFICATION** |3.6~4.4V<br>**VOLTAGE ADJ. RANGE**<br>110~140% rated output power<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)Note.8**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>2000ms, 80ms/230VAC; 3000ms, 80ms/115VAC at full load;550ms/230VAC for 55V setup time<br>90 ~ 264VAC 127 ~ 370VDC<br>Cold start 40A/115VAC 80A/230VAC<br><0.75mA / 240VAC<br>-30 ~ +70<br>(Refer to “Derating Curve")<br>℃<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃)<br>0.03%/<br>(0 ~ 50<br>10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes<br>257K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>PF<br>0.94/230VAC PF<br>0.98/115VAC at full load<br>≥<br>≥<br>10ms/230VAC 10ms/115VAC<br>90%<br>±1.0%<br>±0.5%<br>±2.0%<br>150mVp-p<br>4.2V<br>40A<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>The<br>℃<br>The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that<br>it still meets EMC directives.<br>**ENVIRONMENT**<br>**PROTECTION**<br>194*55*26mm (L*W*H)<br>Protection type :Shut down O/P voltage,re-power on to recover<br>Protection type :Shut down O/P voltage or Hiccup mode, recovers automatically after temperature goes down<br>2.2A/115VAC 1.1A/230VAC<br>168W<br>**RATED POWER**<br>0.468kg;24pcs/12.2kg/0.49CUFT<br>47 ~ 63Hz<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>93%<br>4.5~5.5V<br>±1.0%<br>±0.5%<br>±2.0%<br>200mVp-p<br>5V<br>40A<br>200W<br>11.4~12.6V<br>±0.5%<br>±0.3%<br>±1.0%<br>240mVp-p<br>12V<br>16.7A<br>200.4W<br>14.3~15.8V<br>240mVp-p<br>15V<br>13.4A<br>201W<br>22.8~25.2V<br>240mVp-p<br>24V<br>8.4A<br>201.6W<br>34.2~37.8V<br>240mVp-p<br>36V<br>5.6A<br>201.6W<br>45.6~50.4V<br>300mVp-p<br>48V<br>4.2A<br>201.6W<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>94%<br>**FUNCTION**<br>**DC OK SIGNAL(Optional)**<br>**REDUNDANT(Optional)**<br>Contact rating(max.):15Vdc/10mA resistive load<br>For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be automatically<br>enabled. This can prevent the system crash, and provide the reliability of system<br>**SAFETY STANDARDS**<br>**EMC EMISSION**<br>**EMC IMMUNITY**<br>Compliance to EN55032,GB9254,Class B, EN55014,EN61000-3-2,-3,EAC TP TC 020,BSMI CNS13438<br>**SAFETY &**<br>**EMC**<br>**(Note.6)**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC<br>I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25<br>/ 70%RH<br>℃<br>Compliance to EN61000-4-2,3,4,5,6,8,11;EN61000-6-2 (EN50082-2), heavy industry level ,criterial A,EAC TP TC 020<br>UL 62368-1,TUV EN62368-1,EN60335-1(Except for 55V), CCC GB4943, EAC TP TC 004,<br>approved, Design refer to EN61558-1,-2-16<br>BSMI CNS14336-1<br>4.62 ~ 5.46V<br>39.6 ~46.8V<br>13.2 ~ 15.6V<br>5.75 ~ 6.75V<br>16.5 ~ 19.5V<br>26.4 ~ 31.2V<br>52.8 ~ 62.4V<br>3.2~3.5V<br>±1.0%<br>±0.5%<br>±2.0%<br>150mVp-p<br>3.3V<br>40A<br>132W<br>89%<br>3.8~ 4.6V<br>94%<br>94%<br>94%<br>91%<br>**UHP-200 -4.2**<br>**UHP-200 -5**<br>**UHP-200 -12**<br>**UHP-200 -15**<br>**UHP-200 -24**<br>**UHP-200 -36**<br>**UHP-200 -48**<br>**UHP-200 -3.3**<br>**UHP-200 -55**<br>45~58V<br>360mVp-p<br>55V<br>3.6A<br>201.6W<br>±0.5%<br>±0.3%<br>±1.0%<br>94%<br>60 ~ 69V<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance :includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the derating curve for more details.<br>5.<br>ambienttemperature derating of<br>5<br>/1000m is needed for operating altitude greater than 2000m(6500ft)<br>6.<br>For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http://www.meanwell.com)<br>7. R type efficiency slightly less than the Blank type, according to the actual measurement.<br>8.Inrush current parameter has 10% tolerance<br>.|3.6~4.4V<br>**VOLTAGE ADJ. RANGE**<br>110~140% rated output power<br>**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**OUTPUT**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**POWER FACTOR (Typ.)**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)Note.8**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>2000ms, 80ms/230VAC; 3000ms, 80ms/115VAC at full load;550ms/230VAC for 55V setup time<br>90 ~ 264VAC 127 ~ 370VDC<br>Cold start 40A/115VAC 80A/230VAC<br><0.75mA / 240VAC<br>-30 ~ +70<br>(Refer to “Derating Curve")<br>℃<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃)<br>0.03%/<br>(0 ~ 50<br>10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes<br>257K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>PF<br>0.94/230VAC PF<br>0.98/115VAC at full load<br>≥<br>≥<br>10ms/230VAC 10ms/115VAC<br>90%<br>±1.0%<br>±0.5%<br>±2.0%<br>150mVp-p<br>4.2V<br>40A<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>The<br>℃<br>The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that<br>it still meets EMC directives.<br>**ENVIRONMENT**<br>**PROTECTION**<br>194*55*26mm (L*W*H)<br>Protection type :Shut down O/P voltage,re-power on to recover<br>Protection type :Shut down O/P voltage or Hiccup mode, recovers automatically after temperature goes down<br>2.2A/115VAC 1.1A/230VAC<br>168W<br>**RATED POWER**<br>0.468kg;24pcs/12.2kg/0.49CUFT<br>47 ~ 63Hz<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed<br>93%<br>4.5~5.5V<br>±1.0%<br>±0.5%<br>±2.0%<br>200mVp-p<br>5V<br>40A<br>200W<br>11.4~12.6V<br>±0.5%<br>±0.3%<br>±1.0%<br>240mVp-p<br>12V<br>16.7A<br>200.4W<br>14.3~15.8V<br>240mVp-p<br>15V<br>13.4A<br>201W<br>22.8~25.2V<br>240mVp-p<br>24V<br>8.4A<br>201.6W<br>34.2~37.8V<br>240mVp-p<br>36V<br>5.6A<br>201.6W<br>45.6~50.4V<br>300mVp-p<br>48V<br>4.2A<br>201.6W<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>±0.5%<br>±0.3%<br>±1.0%<br>94%<br>**FUNCTION**<br>**DC OK SIGNAL(Optional)**<br>**REDUNDANT(Optional)**<br>Contact rating(max.):15Vdc/10mA resistive load<br>For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be automatically<br>enabled. This can prevent the system crash, and provide the reliability of system<br>**SAFETY STANDARDS**<br>**EMC EMISSION**<br>**EMC IMMUNITY**<br>Compliance to EN55032,GB9254,Class B, EN55014,EN61000-3-2,-3,EAC TP TC 020,BSMI CNS13438<br>**SAFETY &**<br>**EMC**<br>**(Note.6)**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC<br>I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25<br>/ 70%RH<br>℃<br>Compliance to EN61000-4-2,3,4,5,6,8,11;EN61000-6-2 (EN50082-2), heavy industry level ,criterial A,EAC TP TC 020<br>UL 62368-1,TUV EN62368-1,EN60335-1(Except for 55V), CCC GB4943, EAC TP TC 004,<br>approved, Design refer to EN61558-1,-2-16<br>BSMI CNS14336-1<br>4.62 ~ 5.46V<br>39.6 ~46.8V<br>13.2 ~ 15.6V<br>5.75 ~ 6.75V<br>16.5 ~ 19.5V<br>26.4 ~ 31.2V<br>52.8 ~ 62.4V<br>3.2~3.5V<br>±1.0%<br>±0.5%<br>±2.0%<br>150mVp-p<br>3.3V<br>40A<br>132W<br>89%<br>3.8~ 4.6V<br>94%<br>94%<br>94%<br>91%<br>**UHP-200 -4.2**<br>**UHP-200 -5**<br>**UHP-200 -12**<br>**UHP-200 -15**<br>**UHP-200 -24**<br>**UHP-200 -36**<br>**UHP-200 -48**<br>**UHP-200 -3.3**<br>**UHP-200 -55**<br>45~58V<br>360mVp-p<br>55V<br>3.6A<br>201.6W<br>±0.5%<br>±0.3%<br>±1.0%<br>94%<br>60 ~ 69V<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance :includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the derating curve for more details.<br>5.<br>ambienttemperature derating of<br>5<br>/1000m is needed for operating altitude greater than 2000m(6500ft)<br>6.<br>For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http://www.meanwell.com)<br>7. R type efficiency slightly less than the Blank type, according to the actual measurement.<br>8.Inrush current parameter has 10% tolerance<br>.|**UHP-200 -3.3**|**UHP-200 -4.2**|**UHP-200 -5**|**UHP-200 -12**|**UHP-200 -15**|**UHP-200 -24**|**UHP-200 -36**|**UHP-200 -48**<br>**UHP-200 -55**|**UHP-200 -55**| |---|---|---|---|---|---|---|---|---|---|---| ||**DC VOLTAGE**|3.3V|4.2V|5V|12V|15V|24V|36V|48V|55V| ||**RATED CURRENT**|40A|40A|40A|16.7A|13.4A|8.4A|5.6A|4.2A|3.6A| ||**RATED POWER**|132W|168W|200W|200.4W|201W|201.6W|201.6W|201.6W|201.6W| ||**RIPPLE & NOISE (max.) Note.2**|150mVp-p|150mVp-p|200mVp-p|240mVp-p|240mVp-p|240mVp-p|240mVp-p|300mVp-p|360mVp-p| ||**VOLTAGE ADJ. RANGE**|3.2~3.5V|3.6~4.4V|4.5~5.5V|11.4~12.6V|14.3~15.8V|22.8~25.2V|34.2~37.8V|45.6~50.4V|45~58V| ||**VOLTAGE TOLERANCE Note.3**|±2.0%|±2.0%|±2.0%|±1.0%|±1.0%|±1.0%|±1.0%|±1.0%|±1.0%| ||**LINE REGULATION**|±0.5%|±0.5%|±0.5%|±0.3%|±0.3%|±0.3%|±0.3%|±0.3%|±0.3%| ||**LOAD REGULATION**|±1.0%|±1.0%|±1.0%|±0.5%|±0.5%|±0.5%|±0.5%|±0.5%|±0.5%| ||**SETUP, RISE TIME**|2000ms, 80ms/230VAC; 3000ms, 80ms/115VAC at full load;550ms/230VAC for 55V setup time||||||||| ||**HOLD UP TIME (Typ.)**|10ms/230VAC 10ms/115VAC||||||||| ||**VOLTAGE RANGE**<br>**Note.4**|90 ~ 264VAC 127 ~ 370VDC||||||||| ||**FREQUENCY RANGE**|47 ~ 63Hz||||||||| ||**POWER FACTOR (Typ.)**|PF<br>0.94/230VAC PF<br>0.98/115VAC at full load<br>≥<br>≥||||||||| ||**EFFICIENCY (Typ.)**|89%|90%|91%|93%|94%|94%|94%|94%|94%| ||**AC CURRENT (Typ.)**|2.2A/115VAC 1.1A/230VAC||||||||| ||**INRUSH CURRENT (Typ.)Note.8**|Cold start 40A/115VAC 80A/230VAC||||||||| ||**LEAKAGE CURRENT**|<0.75mA / 240VAC||||||||| ||**OVERLOAD**|110~140% rated output power<br>Protection type : Hiccup mode, recovers automatically after fault condition is removed||||||||| ||**OVER VOLTAGE**|Protection type :Shut down O/P voltage,re-power on to recover<br>4.62 ~ 5.46V<br>39.6 ~46.8V<br>13.2 ~ 15.6V<br>5.75 ~ 6.75V<br>16.5 ~ 19.5V<br>26.4 ~ 31.2V<br>52.8 ~ 62.4V<br>3.8~ 4.6V<br>60 ~ 69V||||||||| ||**OVER TEMPERATURE**|Protection type :Shut down O/P voltage or Hiccup mode, recovers automatically after temperature goes down||||||||| ||**DC OK SIGNAL(Optional)**|Contact rating(max.):15Vdc/10mA resistive load||||||||| ||**REDUNDANT(Optional)**|For parallel connection protection:For parallel applications, when one PSU can not work , the another one will be automatically<br>enabled. This can prevent the system crash, and provide the reliability of system||||||||| ||**WORKING TEMP.**|-30 ~ +70<br>(Refer to “Derating Curve")<br>℃||||||||| ||**WORKING HUMIDITY**|20 ~ 95% RH non-condensing||||||||| ||**STORAGE TEMP., HUMIDITY**|-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃||||||||| ||**TEMP. COEFFICIENT**|±<br>℃<br>℃)<br>0.03%/<br>(0 ~ 50||||||||| ||**VIBRATION**|10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes||||||||| ||**SAFETY STANDARDS**|UL 62368-1,TUV EN62368-1,EN60335-1(Except for 55V), CCC GB4943, EAC TP TC 004,<br>approved, Design refer to EN61558-1,-2-16<br>BSMI CNS14336-1||||||||| ||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC||||||||| ||**ISOLATION RESISTANCE**|I/P-O/P, I/P-FG,O/P-FG:100M Ohms/500VDC/25<br>/ 70%RH<br>℃||||||||| ||**EMC EMISSION**|Compliance to EN55032,GB9254,Class B, EN55014,EN61000-3-2,-3,EAC TP TC 020,BSMI CNS13438||||||||| ||**EMC IMMUNITY**|Compliance to EN61000-4-2,3,4,5,6,8,11;EN61000-6-2 (EN50082-2), heavy industry level ,criterial A,EAC TP TC 020||||||||| ||**MTBF**|257K hrs min. MIL-HDBK-217F (25<br>)<br>℃||||||||| ||**DIMENSION**|194*55*26mm (L*W*H)||||||||| ||**PACKING**|0.468kg;24pcs/12.2kg/0.49CUFT||||||||| ||℃<br>The<br>℃<br>The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that<br>it still meets EMC directives.<br>1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25<br>of ambient temperature.<br>2. Ripple & noise are measured at20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance :includes set up tolerance, line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the derating curve for more details.<br>5.<br>ambienttemperature derating of<br>5<br>/1000m is needed for operating altitude greater than 2000m(6500ft)<br>6.<br>For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”<br>(as available on http://www.meanwell.com)<br>7. R type efficiency slightly less than the Blank type, according to the actual measurement.<br>8.Inrush current parameter has 10% tolerance<br>.|||||||||| ## **MODEL** _File Name:UHP-200-SPEC 2020-08-24_ **UHP - 200 series** ## 200W Slim Type with PFC Switching Power Supply **==> picture [511 x 668] intentionally omitted <==** **----- Start of picture text -----**<br> Block Diagram<br>PFC fosc:100KHz<br>PWM fosc:90KHz~110KHz<br>EMI FILTER PFC POWER RECTIFIERS +V<br>I/P RECTIFIER& CIRCUIT SWITCH-ING FILTER& -V<br>FG DETECTION<br>CIRCUIT<br>O.T.P. O.L.P.<br>CONTROL<br>O.V.P.<br>DC OK Function<br>Redundant Function<br>Derating Curve<br>230Vac for other<br>100 for other 100<br>230Vac for 4.2V,5V;100Vac for other<br>for 55V<br>80 80 230Vac for 55V<br>100Vac for 4.2V,5V<br>60 60<br>50<br>100Vac for 55V<br>40 40<br>30<br>20 20<br>-30 0 10 20 30 40 50 60 70 (HORIZONTAL) -30 0 10 20 30 40 50 60 70 (HORIZONTAL)<br>AMBIENT TEMPERATURE ( ) AMBIENT TEMPERATURE WITHOUT ALUMINUM PLATE( )<br>100<br>80<br>60<br>for 55V<br>40<br>for other<br>20<br>-30 0 10 20 30 40 50 60 70 80 85 90 (HORIZONTAL)<br>Tcase ( )<br>RATED CURRENT (%) RATED CURRENT (%)<br>RATED CURRENT (%)<br>**----- End of picture text -----**<br> _File Name:UHP-200-SPEC 2020-08-24_ **UHP - 200 series** 200W Slim Type with PFC Switching Power Supply ## **STATIC CHARACTERISTIC** **==> picture [195 x 149] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>90<br>80<br>70<br>60<br>50<br>40<br>90 100 110 120 140 160 180 200 220 240 264<br>INPUT VOLTAGE (V) 60Hz<br>LOAD (%)<br>**----- End of picture text -----**<br> ## **Function Manual** ## **1.DC_OK Signal** DC_OK is a collector shorted signal. It is used by an optocoupler in the power supply which indicates the output status of the power supply as exhibited below. **==> picture [490 x 150] intentionally omitted <==** **----- Start of picture text -----**<br> +V DC OK +V<br>Optocoupler C-E Pin Conduction PSU turns on DC ok<br>Optocoupler C-E Pin Open PSU turns off DC fail<br>Optocoupler Rating(max.) 15Vdc/10mA resistive load<br>GND COM<br>PSU<br>1K<br>C<br>E<br>**----- End of picture text -----**<br> ## **2.Redundant function** **==> picture [269 x 8] intentionally omitted <==** **----- Start of picture text -----**<br> (1) UHP-200R is built-in redundant function and can be connected 2 units in parallel .<br>**----- End of picture text -----**<br> - (2) When in parallel operation the maximum load should not be greater than the rated power of any PSU. **==> picture [158 x 72] intentionally omitted <==** **----- Start of picture text -----**<br> +V<br>+V<br>PSU -V -V LOAD<br>+V<br>PSU -V<br>**----- End of picture text -----**<br> _File Name:UHP-200-SPEC 2020-08-24_ ## 200W Slim Type with PFC Switching Power Supply ## **UHP - 200 series** ## **Mechanical Specification** **==> picture [488 x 293] intentionally omitted <==** **----- Start of picture text -----**<br> CASE NO.:249B Unit:mm<br>194<br>188 3<br>1 2<br>1<br>3<br>TB3 2<br>2<br>1 TB2 3<br>TB1 4<br>SVR<br>4-ψ3.3 L=6<br>97<br>tc<br>6.5<br>8.8<br>8.5<br>7.62<br>8 42 55<br>26<br>13<br>**----- End of picture text -----**<br> �tc : Max. Case Temperature AC Input Terminal(TB1) pin NO. Assignment DC Output Terminal(TB2,TB3) pin NO. Assignment Pin No. Assignment Terminal Max mounting torque Pin No. Assignment Terminal Max mounting torque 1 AC/L 2 AC/N DG28C-B-03P(DEGSON) 5Kgf-cm 13,4,2 +V-V TB-HTP-200-40A(MW) 8Kgf-cm 3 DC OK Connector(CN10):JST B2B-PH-K-S or equivalent Pin No. Assignment Mating Housing Terminal 1 DC COM JST PHR-2 JST SPH-002T-P0.5S 2 DC OK +V or equivalent or equivalent _File Name:UHP-200-SPEC 2020-08-24_ **UHP - 200 series** ## 200W Slim Type with PFC Switching Power Supply ## **Installation** ## **1.Operate with additional aluminum plate** **==> picture [479 x 238] intentionally omitted <==** **----- Start of picture text -----**<br> In order to meet the“Derating Curve”and the “Static Characteristics” ,UHP-200 series must be installed onto an aluminum plate(or the cabinet of the same size)<br>on the bottom.The size of the suggested aluminum plate is shown as below. And for optimizing thermal performance, the aluminum plate must have an even and<br>smooth surface (or coated with thermal grease), and UHP-200 series must be firmly mounted at the center of the aluminum plate.<br>unit:mm<br>M3*4<br>300<br>300 3<br>**----- End of picture text -----**<br> _File Name:UHP-200-SPEC 2020-08-24_
Updated at June 6, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →