UF4003
Fast / Ultrafast Diode, 200 V, 1 A, Single, 1 V, 50 ns, 30 A
- Manufacturer: ONSEMI
- Product type: Fast & Ultrafast Recovery Rectifier Diodes
- Repetitive Reverse Voltage Vrrm Max:200V; Forward Current If(AV):1A; Diode Configuration:Single; Forward Voltage VF Max:1V; Reverse Recovery Time trr Max:50ns; Forward Surge Current I
- SVHC: No SVHC (25-Jun-2025)
- No. of Pins: 2 Pin
- Product Range: UF400
- Qualification: -
- Diode Case Style: DO-41 (DO-204AL)
- Diode Configuration: Single
- Forward Voltage Max: 1V
- Forward Surge Current: 30A
- Reverse Recovery Time: 50ns
- Average Forward Current: 1A
- Operating Temperature Max: 150°C
- Repetitive Peak Reverse Voltage: 200V
| Delivery and price | |
|---|---|
| Units per pack | 1000 |
| Price | 0.105 € |
| Current stock | 1000+ |
| Lead time | 30 days |
## **Is Now Part of**
## **To learn more about ON Semiconductor, please visit our website at www.onsemi.com**
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
**==> picture [50 x 9] intentionally omitted <==**
**----- Start of picture text -----**<br>
August 2016<br>**----- End of picture text -----**<br>
## **UF4001 - UF4007 Fast Rectifiers**
## **Features**
- Low Forward Voltage Drop
- High Surge Current Capability
- High Reliability
- High Current Capability
- Glass-Passivated Junction
**==> picture [83 x 14] intentionally omitted <==**
**----- Start of picture text -----**<br>
DO-41 (Plastic)<br>COLOR BAND DENOTES CATHODE<br>**----- End of picture text -----**<br>
## **Ordering Information**
|**Part Number**|**Top Mark**|**Package**|**Packing Method**|
|---|---|---|---|
|UF4001|UF4001|DO-204AL (DO-41)|Tape and Reel|
|UF4002|UF4002|DO-204AL (DO-41)|Tape and Reel|
|UF4003|UF4003|DO-204AL (DO-41)|Tape and Reel|
|UF4004|UF4004|DO-204AL (DO-41)|Tape and Reel|
|UF4005|UF4005|DO-204AL (DO-41)|Tape and Reel|
|UF4006|UF4006|DO-204AL (DO-41)|Tape and Reel|
|UF4007|UF4007|DO-204AL (DO-41)|Tape and Reel|
## **Absolute Maximum Ratings**
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
|**Symbol**|**Parameter**|**Value**|**Value**|**Value**|**Value**|**Value**|**Value**|**Value**|**Unit**|
|---|---|---|---|---|---|---|---|---|---|
|||**UF**<br>**4001**|**UF**<br>**4002**|**UF**<br>**4003**|**UF**<br>**4004**|**UF**<br>**4005**|**UF**<br>**4006**|**UF**<br>**4007**||
|VRRM|Maximum Repetitive Reverse Voltage|50|100|200|400|600|800|1000|V|
|IF(AV)|Average Rectified Forward Current<br>.375 " Lead Length at TA= 75C|1.0|||||||A|
|IFSM|Non-Repetitive Peak Forward Surge Current<br>8.3 ms Single Half-Sine-Wave|30|||||||A|
|TSTG|Storage Temperature Range|-65 to +150|||||||C|
|TJ|Operating Junction Temperature|-65 to +150|||||||C|
© 1999 Fairchild Semiconductor Corporation UF4001 - UF4007 Rev. 1.8
www.fairchildsemi.com
## **Thermal Characteristics**
Values are at TA = 25°C unless otherwise noted.
|Values are at TA = 25°C unless otherwise noted.|Values are at TA = 25°C unless otherwise noted.A = 25°C unless otherwise noted.= 25°C unless otherwise noted.|||
|---|---|---|---|
|**Symbol**|**Parameter**|**Value**|**Unit**|
|PD|Power Dissipation|2.08|W|
|RJA|Thermal Resistance, Junction-to-Ambient|60|C/W|
|RJL|Thermal Resistance, Junction-to-Lead|30|C/W|
## **Electrical Characteristics**
Values are at TA = 25°C unless otherwise noted.
|**Symbol**|**Parameter**|**Conditions**|**Value**|**Value**|**Value**|**Value**|**Value**|**Value**|**Value**|**Unit**|
|---|---|---|---|---|---|---|---|---|---|---|
||||**UF**<br>**4001**|**UF**<br>**4002**|**UF**<br>**4003**|**UF**<br>**4004**|**UF**<br>**4005**|**UF**<br>**4006**|**UF**<br>**4007**||
|VF|Maximum Forward Voltage|IF= 1.0 A|1.0||||1.7|||V|
|trr|Maximum Reverse<br>Recovery Time|IF= 0.5 A,<br>IR= 1.0 A,<br>IRR= 0.25 A|50||||75|||ns|
|IR|Maximum Reverse Current<br>at Rated VR|TA= 25C|10|||||||A|
|||TA= 100C|50||||||||
|CT|Maximum Total Capacitance|VR= 4.0 V,<br>f = 1.0 MHz|17|||||||pF|
© 1999 Fairchild Semiconductor Corporation UF4001 - UF4007 Rev. 1.8
www.fairchildsemi.com
2
## **Typical Performance Characteristics**
**==> picture [407 x 438] intentionally omitted <==**
**----- Start of picture text -----**<br>
1.6 10<br>1.4 T Pulse Width = 300 A J = 25 C º μ S<br>1.2 eee 1 Kee 2% Duty Cycle A<br>1<br>0.8 SINGLE PHASE 0.1 LZ UF4001-UF4003 UF4005-UF4007<br> HALF WAVE<br>0.6 60HZ<br> RESISTIVE OR<br>0.4 INDUCTIVE LOAD 0.01 UF4004<br> .375" (9.00mm) LOAD<br>0.2 LENGTHS<br>0 0 25 50 75 | 100 | 125 TN 150 175 0.0010.2 a 0.4 0.6 0.8 1 1.2 1.4<br>Ambient Temperature [ºC] Forward Voltage, VF [V]<br>Figure 1. Forward Current Derating Curve Figure 2. Forward Characteristics<br>4030 LIE LTH 1000100 peppy<br>< A T = 125 C A º<br>q == aE =<br>20 10<br>ST TEL ae<br>10 eel 1 Sates T = 25 C A J º<br>sais sae<br>0 0.1<br>1 | LTA 2 5 10 20 {UTI 50 100 0 =—====—= 20 40 60 80 100 120 o 140<br>Number of Cycles at 60Hz Percent of Rated Peak Reverse Voltage [%]<br>Figure 3. Non-Repetitive Surge Current Figure 4. Reverse Characteristics<br>6050 0<br>40<br>0<br>30<br>SST UF4001-UF4003 TU<br>20<br>Bi UF4004-UF4007 Ua<br>10<br>OSSNE TT<br>0 Citi<br>0.1 0.5 1 2 5 10 20 50 100 500<br>Reverse Voltage, VR [V]<br> [A]<br>F<br> [A]<br>F<br>Forward Current, I<br>Average Rectified Forward Current, I<br> [A]<br>FSM<br> [mA]<br>R<br>Reverse Current, I<br>Peak Forward Surge Current, I<br> [pF]<br>T<br>Total Capacitance, C<br>**----- End of picture text -----**<br>
**Figure 5. Typical Junction Capacitance**
**==> picture [368 x 118] intentionally omitted <==**
**----- Start of picture text -----**<br>
50NONINDUCTIVEΩ 50NONINDUCTIVEΩ +0.5A Neeao trr<br>(-)<br>DUT<br>Pulse 0 ee<br>50V(approx) Generator(Note 2) -0.25A |itr |<br>|}<br>50Ω OSCILLOSCOPE (+)<br>NONINDUCTIVE (Note 1) | f | tt<br>ft 7 | tf<br>NOTES: -1.0A<br>1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf.2. Rise time = 10 ns max; Source impedance = 50 ohms. A 1.0cm LA SET TIME BASE FOR 5/ 10 ns/ cm | |<br>**----- End of picture text -----**<br>
**Figure 6. Reverse Recovery Time Characteristic and Test Circuit Diagram**
© 1999 Fairchild Semiconductor Corporation UF4001 - UF4007 Rev. 1.8
www.fairchildsemi.com
3
THIS DRAWING IS THE PROPERTY OF FAIRCHILD SEMICONDUCTOR CORPORATION. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS AS SUBMITTED TO FAIRCHILD SEMICONDUCTOR CORPORATION FOR JOBS TO BE EXECUTED IN CONFORMITY WITH SUCH PROPOSALS UNLESS THE CONSENT OF SAID FAIRCHILD SEMICONDUCTOR CORPORATION HAS PREVIOUSLY BEEN OBTAINED. NO PART OF THIS DRAWING SHALL BE COPIED OR DUPLICATED OR ITS CONTENTS DISCLOSED. THE INFORMATION CONTAINED ON THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY.
REVISIONS NBR DESCRIPTION DATE BY/APP'D 1 RELEASED TO DCC 29JUL08 HYANG/ SUZHOU 2 CHANGE 5.20 TO 5.21. 19SEP08 HYANG/ SUZHOU CHANGE NOTE "B" ADDED PLASTCI BODY. REMOVE "GLASS" ON TITLE.
25.40 MIN (2X) 5.20 4.06
0.86 0.71 2.72 2.03 NOTES: UNLESS OTHERWISE SPECIFIED A) PACKAGE STANDARD REFERENCE: JEDEC DO-204 VARIATION AL. B) PACKAGE BODY CAN BE PLASTIC OR HERMETICALLY SEALED GLASS . D) ALL DIMENSIONS ARE IN MILLIMETERS. E) DRAWING FILE NAME: DO41AREV2
APPROVALS DATE DRAWN: BOBOY MALDO 19SEP08 CHECKED: HENRY YANG APPROVED: BY HUANG AXIAL LEADED, APPROVED:HOWARD ALLEN JEDEC DO204, VARIATION AL PROJECTION SCALE1:1 N/ASIZE DRAWING NUMBERMKT-DO41A REV2 [MM] INCH FORMERLY: N/A SHEET : 1 OF 1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
## **PUBLICATION ORDERING INFORMATION**
**N. American Technical Support** : 800−282−9855 Toll Free **ON Semiconductor Website** : **www.onsemi.com** USA/Canada
## **LITERATURE FULFILLMENT** :
Literature Distribution Center for ON Semiconductor
**Order Literature** : http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA **Europe, Middle East and Africa Technical Support: Phone** : 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910 **Fax** : 303−675−2176 or 800−344−3867 Toll Free USA/Canada **Japan Customer Focus Center Email** : orderlit@onsemi.com Phone: 81−3−5817−1050
© Semiconductor Components Industries, LLC
www.onsemi.com
**www.onsemi.com**
**1**
Updated at June 8, 2026
onsemi is a premier global supplier of intelligent power and sensing technologies, driving disruptive innovations across the automotive, industrial, and cloud infrastructure markets. Recognized for their commitment to sustainability and reliable supply chains, the company accelerates advancements in vehicle electrification, industrial automation, and 5G networks by solving the industry's most complex design challenges. At the core of their portfolio is an industry-leading selection of discrete semiconductors. This extensive range features thousands of high-performance bipolar transistors, single and dual MOSFETs, and a comprehensive array of diodes, including Zener, Schottky, and fast-recovery rectifiers. Engineered for superior thermal performance and energy efficiency, these foundational components are critical for demanding power conversion, switching, and signal conditioning applications. Beyond essential discretes, onsemi provides a robust suite of advanced power management and circuit protection solutions. Their lineup includes intelligent power modules, single IGBTs, and transient voltage suppression (TVS) diodes designed to safeguard sensitive circuitry. Complimented by integrated passive filters, AC/DC LED driver ICs, and specialized sub-2.4GHz RF transceivers, onsemi equips engineers with the scalable, high-quality technologies needed to build a cleaner, smarter, and more connected world.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →