Image not available
Illustrative purposes only
UCLAMP0801T.TCT
TVS DIODE, UNIDIR, 17V, SLP1006P2T
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: SEMTECH
- Product type: TVS Diodes
- Prod; TVS DIODE, UNIDIR, 17V, SLP1006P2T; Product Range:µClamp Series; TVS Polarity:Unidirectional; Reverse Standoff Voltage:8V; Clamping Voltage Max:17V; Diode Case Style:SLP1006P2T;
- SVHC: To Be Advised
- No. of Pins: 2Pins
- TVS Polarity: Unidirectional
- Product Range: µClamp Series
- Qualification: -
- Diode Mounting: Surface Mount
- Diode Case Style: SLP1006P2T
- Clamping Voltage Max: 17V
- Reverse Standoff Voltage: 8V
- Maximum Breakdown Voltage: 12.5V
- Minimum Breakdown Voltage: 9.5V
- Operating Temperature Max: 125°C
- Peak Pulse Power Dissipation: -
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 0.304 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
uClamp0801T Low Profile μClamp[®] 1-Line ESD protection ## **PROTECTION PRODUCTS** - MicroClamp[®] ## Description The μClamp[®] series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClamp0801T is in a 2-pin, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 8 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical. They may be used to meet the ESD immunity requirements of IEC 610004-2, Level 4 (±15kV air, ±8kV contact discharge). The combination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and MP3 players. ## Features - Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (tp = 5/50ns) Cable Discharge Event (CDE) - Ultra-small package (1.0 x 0.6 x 0.4mm) - Protects one data line - Low clamping voltage - Working voltage: 8V - Low leakage current - Solid-state silicon-avalanche technology ## Mechanical Characteristics - SLP1006P2T package - Pb-Free, Halogen Free, RoHS/WEEE Compliant - Nominal Dimensions: 1.0 x 0.6 x 0.4 mm - Lead Finish: NiPdAu - Molding compound flammability rating: UL 94V-0 - Marking : Marking code, cathode band - Packaging : Tape and Reel ## Applications - Cellular Handsets & Accessories - Personal Digital Assistants (PDAs) - Notebooks & Handhelds - Portable Instrumentation - Digital Cameras - Peripherals - MP3 Players **==> picture [265 x 233] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions<br>1.0<br>0.60<br>0.65<br>0.40<br>Nominal Dimensions (mm)<br>**----- End of picture text -----**<br> ## Schematic & PIN Configuration **==> picture [73 x 123] intentionally omitted <==** **----- Start of picture text -----**<br> 2<br>1<br>**----- End of picture text -----**<br> **==> picture [140 x 11] intentionally omitted <==** **----- Start of picture text -----**<br> SLP1006P2T (Bottom View)<br>**----- End of picture text -----**<br> www.semtech.com Revision 03/30/2011 1 uClamp0801T ## PROTECTION PRODUCTS ## Absolute Maximum Rating |PROTECTION PRODUCTS<br>Absolute Maximum Rating|||| |---|---|---|---| |g<br>n<br>it<br>a<br>R|l<br>o<br>b<br>m<br>y<br>S|e<br>ul<br>a<br>V|s<br>ti<br>n<br>U| |)riA<br>(<br>2<br>-<br>4<br>-<br>0<br>0<br>0<br>1<br>6<br>C<br>EI<br>r<br>e<br>p<br>D<br>S<br>E<br>)tc<br>a<br>t<br>n<br>o<br>C<br>(<br>2<br>-<br>4<br>-<br>0<br>0<br>0<br>1<br>6<br>C<br>EI<br>r<br>e<br>p<br>D<br>S<br>E|V<br>D<br>S<br>E|0<br>2<br>-/<br>+<br>5<br>1<br>-/<br>+|V<br>k| |e<br>r<br>u<br>t<br>a<br>r<br>e<br>p<br>m<br>e<br>T<br>g<br>nit<br>a<br>r<br>e<br>p<br>O|TJ|5<br>2<br>1<br>+<br>o<br>t<br>5<br>5<br>-|C<br>°| |e<br>r<br>u<br>t<br>a<br>r<br>e<br>p<br>m<br>e<br>T<br>e<br>g<br>a<br>r<br>o<br>t<br>S|T<br>G<br>T<br>S|0<br>5<br>1<br>+<br>o<br>t<br>5<br>5<br>-|C<br>°| ## Electrical Characteristics (T=25[o] C) |Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)| |---|---|---|---|---|---|---| |||||||| |r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P|l<br>o<br>b<br>m<br>y<br>S|s<br>n<br>oiti<br>d<br>n<br>o<br>C|m<br>u<br>m<br>i<br>n<br>i<br>M|l<br>a<br>ci<br>p<br>y<br>T|m<br>u<br>m<br>ix<br>a<br>M|s<br>ti<br>n<br>U| |e<br>g<br>a<br>tlo<br>V<br>ff<br>O<br>-<br>d<br>n<br>a<br>t<br>S<br>e<br>sr<br>e<br>v<br>e<br>R|V<br>M<br>W<br>R||||8|V| |e<br>g<br>a<br>tlo<br>V<br>n<br>w<br>o<br>d<br>k<br>a<br>e<br>r<br>B<br>e<br>sr<br>e<br>v<br>e<br>R|V R<br>B|It<br>A<br>m<br>1<br>=|5<br>.<br>9||5<br>.<br>2<br>1|V| |t<br>n<br>e<br>rr<br>u<br>C<br>e<br>g<br>a<br>k<br>a<br>e<br>L<br>e<br>sr<br>e<br>v<br>e<br>R|IR|V<br>M<br>W<br>R<br>C<br>°<br>5<br>2<br>=<br>T<br>,V<br>8<br>=|||5<br>2<br>.<br>0|A<br>μ| |e<br>g<br>a<br>tlo<br>V<br>g<br>nip<br>m<br>alC|C<br>V|I P<br>P<br>s<br>μ<br>0<br>2<br>/<br>8<br>=<br>p<br>t<br>,<br>A<br>5<br>.<br>1<br>=|||7<br>1|V| |e<br>g<br>a<br>tlo<br>V<br>d<br>r<br>a<br>w<br>r<br>o<br>F|VF|IF<br>A<br>m<br>0<br>1<br>=||1|2<br>.<br>1|V| |e<br>c<br>n<br>a<br>tic<br>a<br>p<br>a<br>C<br>n<br>oitc<br>n<br>u<br>J|Cj|VR<br>z<br>H<br>M<br>1<br>=<br>f<br>,V<br>0<br>=|||0<br>1|F<br>p| |e<br>c<br>n<br>a<br>tic<br>a<br>p<br>a<br>C<br>n<br>oitc<br>n<br>u<br>J|Cj|VR<br>z<br>H<br>M<br>1<br>=<br>f<br>,V<br>3<br>.<br>3<br>=||5<br>.<br>4||F<br>p| www.semtech.com © 2011 Semtech Corp. 2 uClamp0801T ## PROTECTION PRODUCTS ## Typical Characteristics ## Typical Insertion Loss (S21) ## Normalized Junction Capacitance vs. Reverse Voltage **==> picture [524 x 208] intentionally omitted <==** **----- Start of picture text -----**<br> CH1 S21 LOG 6 dB / REF 0 dB<br>1.2<br>1: -2.3043 dB<br>800 MHz 1.1<br>1: -2.6270 dB 1<br> 0 dB 900 MHz 0.9<br>-6 dB Le 1 2 S| 2: -9.3111 dB 0.8 NX<br>1.8 GHz 0.7<br>a 3 PON<br> -12 dB mii A| 3: -21.903 dB 0.6 a eee<br> -18 dB | 2.7 GHz 0.5 Pe ee<br>0.4<br> -24 dB<br>0.3<br> -30 dB 0.2<br>0.1 f = 1 MHz<br> -36 dB<br>0<br>0 1 2 3 4 5 6 7 8<br>Reverse Voltage - VR (V)<br>1 10 100 1 3<br> MHz MHz MHz GHz GHz<br>START. 030 MHz STOP 3000.000000 MHz<br>=0)<br>R<br>) / C(VJ<br>R<br>C(VJ<br>**----- End of picture text -----**<br> ## Clamping Voltage vs. Peak Pulse Current **==> picture [236 x 157] intentionally omitted <==** **----- Start of picture text -----**<br> 20<br>18<br>16<br>14<br>12<br>10<br>8<br>6<br>Waveform<br>4 Parameters:<br>tr = 8μs<br>2 td = 20μs<br>0<br>0 0.5 1 1.5 2<br>Peak Pulse Current - IPP (A)<br> (V)<br>C<br>Clamping Voltage - V<br>**----- End of picture text -----**<br> ## ESD Clamping ## (+8kV Contact per IEC 61000-4-2) ## ESD Clamping (-8kV Contact per IEC 61000-4-2) Note: ESD data is taken with a 10x attenuator www.semtech.com © 2011 Semtech Corp. 3 uClamp0801T ## PROTECTION PRODUCTS ## Applications Information ## Device Connection Options ## Circuit Diagram This device is designed to protect one data or power supply line. The device is unidirectional and may be used on lines where the signal polarity is above ground. The cathode band should be placed towards the line that is to be protected. ## Circuit Board Layout Recommendations for Suppression of ESD. Good circuit board layout is critical for the suppression of ESD induced transients. The following guidelines are recommended: - Place the TVS near the input terminals or connectors to restrict transient coupling. - Minimize the path length between the TVS and the protected line. - Minimize all conductive loops including power and ground loops. - The ESD transient return path to ground should be kept as short as possible. - Never run critical signals near board edges. - Use ground planes whenever possible. www.semtech.com 4 © 2011 Semtech Corp. uClamp0801T ## PROTECTION PRODUCTS ## Applications Information - Spice Model uClamp0801T Spice Model |s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>T<br>1<br>0<br>8<br>0<br>p<br>m<br>al<br>C<br>u|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>T<br>1<br>0<br>8<br>0<br>p<br>m<br>al<br>C<br>u|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>T<br>1<br>0<br>8<br>0<br>p<br>m<br>al<br>C<br>u| |---|---|---| |r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P|ti<br>n<br>U|)<br>S<br>V<br>T<br>(<br>1<br>D| |S<br>I|p<br>m<br>A|3<br>1<br>-<br>E<br>7<br>8<br>.<br>3| |V<br>B|tlo<br>V|9<br>.<br>0<br>1| |J<br>V|tlo<br>V|9<br>7<br>.<br>0| |S<br>R|m<br>h<br>O|1<br>7<br>.<br>2| |V<br>B<br>I|p<br>m<br>A|3<br>-<br>E<br>0<br>.<br>1| |O<br>J<br>C|d<br>a<br>r<br>a<br>F|2<br>1<br>-<br>E<br>1<br>7<br>.<br>5| |T<br>T|c<br>e<br>s|9<br>-<br>E<br>1<br>4<br>5<br>.<br>2| |M|--|7<br>2<br>.<br>0| |N|--|1.<br>1| |G<br>E|V<br>e|1<br>1.<br>1| www.semtech.com © 2011 Semtech Corp. 5 uClamp0801T ## PROTECTION PRODUCTS ## Outline Drawing - SLP1006P2T **==> picture [540 x 311] intentionally omitted <==** **----- Start of picture text -----**<br> B<br>A D<br>DIMENSIONS<br>E INCHES MILLIMETERS<br>DIM<br>MIN NOM MAX MIN NOM MAX<br>A .015 .016 .017 0.37 0.40 0.43<br>A1 .000 .001 .002 0.00 0.03 0.05<br>TOP VIEW b .018 .020 .022 0.45 0.50 0.55<br>D .035 .039 .043 0.90 1.00 1.10<br>E .020 .024 .028 0.50 0.60 0.70<br>e .026 BSC 0.65 BSC<br>L .008 .010 .012 0.20 0.25 0.30<br>A<br>SEATING R .002 .004 .006 0.05 0.10 0.15<br>aaa C PLANE N 2 2<br>aaa .003 0.08<br>A1 C bbb .004 0.10<br>PIN 1 ID<br>R<br>bxN<br>bbb C A B<br>2x L<br> e<br>BOTTOM VIEW<br>NOTES:<br>1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).<br>**----- End of picture text -----**<br> ## Land Pattern - SLP1006P2T **==> picture [403 x 100] intentionally omitted <==** **----- Start of picture text -----**<br> DIMENSIONS<br>Y<br>DIM INCHES MILLIMETERS<br>(C) G Z C (.033) (0.85)<br>G .012 0.30<br>X .024 0.60<br>Y .022 0.55<br>Z .055 1.40<br>X<br>**----- End of picture text -----**<br> ## NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. www.semtech.com © 2011 Semtech Corp. 6 uClamp0801T ## PROTECTION PRODUCTS ## Marking Code **==> picture [77 x 55] intentionally omitted <==** **----- Start of picture text -----**<br> 8T<br>**----- End of picture text -----**<br> ## PIN 1 ID ## Ordering Information |||r<br>e<br>b<br>m<br>u<br>N<br>tr<br>a<br>P|g<br>n<br>i<br>k<br>r<br>o<br>W<br>e<br>g<br>a<br>tl<br>o<br>V|e<br>p<br>y<br>t<br>Q<br>l<br>e<br>e<br>R|r|l<br>e<br>e<br>R<br>e<br>zi<br>S| |---|---|---|---|---|---|---| ||u|T<br>C<br>T.T<br>1<br>0<br>8<br>0<br>p<br>m<br>alC|V<br>8|0<br>0<br>0<br>,<br>3||h<br>c<br>nI<br>7| ## Notes: 1) This is a lead-free, RoHS/WEEE compliant product MicroClamp, uClamp and μClamp are marks of Semtech Corporation ## Tape and Reel Specification Cathode Bar User Direction of feed Device Orientation in Tape |0<br>A|0<br>B| |---|---| |0<br>1.<br>0<br>-/<br>+<br>9<br>6<br>.<br>0|m<br>m<br>m<br>m<br>0<br>1.<br>0<br>-/<br>+<br>9<br>1.<br>1<br>6<br>6<br>.<br>0| |e<br>p<br>a<br>T<br>h<br>t<br>di<br>W<br><br>(<br>,<br>B|)x<br>a<br>M<br>D|1<br>D|E|F|P<br>0<br>P|2<br>P|T|W| |---|---|---|---|---|---|---|---|---| |m<br>m<br>8<br>2<br>.<br>4<br><br>1.(|m<br>m<br>)<br>5<br>6<br>m<br>m<br>1.<br>0<br>+<br>5<br>.<br>1<br>m<br>m<br>0<br>.<br>0<br>-<br>5<br>0<br>0<br>.<br>+<br>9<br>5<br>.<br>0<br>(<br>)<br>0<br>0<br>0<br>.-|m<br>m<br>4<br>.<br>0<br>5<br>2<br>.<br>0<br>±<br>)<br>1<br>3<br>0<br>.(<br>(|0<br>1.<br>±<br>0<br>5<br>7<br>.<br>1<br>m<br>m<br>)<br>4<br>0<br>0<br>.<br>±<br>9<br>6<br>0<br>.|5<br>0<br>.<br>0<br>±<br>5<br>.<br>3<br>m<br>m<br>)<br>2<br>0<br>0<br>.<br>±<br>8<br>3<br>1.(<br><br>0<br>.<br>4<br>m<br>7<br>5<br>1.(<br>|0<br>1.<br>0<br>±<br>m<br><br>-<br>0<br>0<br>.<br>±<br><br>)<br>4<br>1.<br>0<br>±<br>0<br>.<br>4<br>m<br>m<br>-<br>0<br>0<br>.<br>±<br>7<br>5<br>1.(<br>)<br>4|5<br>0<br>.<br>0<br>±<br>0<br>.<br>2<br>m<br>m<br>)<br>2<br>0<br>0<br>.<br>±<br>9<br>7<br>0<br>.(|2<br>0<br>.<br>0<br>±<br>4<br>5<br>2<br>.<br>0<br>)<br>6<br>1<br>0<br>.(<br>m<br>m|m<br>m<br>0<br>.<br>8<br>m<br>m<br>3<br>.<br>0<br>+<br>m<br>m<br>1.<br>0<br>-<br>)<br>2<br>1<br>0<br>.<br>±<br>2<br>1<br>3<br>.(| ## Contact Information Semtech Corporation Protection Products Division 200 Flynn Rd., Camarillo, CA 93012 Phone: (805)498-2111 FAX (805)498-3804 www.semtech.com © 2011 Semtech Corp. 7
Updated at April 15, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →