Image not available
Illustrative purposes only
UCLAMP0501P.TCT
TVS DIODE, 200W, 5V, SLP1006P2
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: SEMTECH
- Product type: TVS Diodes
- Product Range:µClamp Series; TVS Polarity:Unidirectional; Reverse Standoff Voltage:5V; Clamping Voltage Max:12.5V; Diode Case Style:SLP1006P2; No. of Pins:2Pins; Minimu 37K8489
- No. of Pins: 2Pins
- TVS Polarity: Unidirectional
- Product Range: µClamp Series
- Qualification: -
- Diode Mounting: Surface Mount
- Diode Case Style: SLP1006P2
- Clamping Voltage Max: 12.5V
- Reverse Standoff Voltage: 5V
- Maximum Breakdown Voltage: 6V
- Minimum Breakdown Voltage: 6V
- Operating Temperature Max: 125°C
- Peak Pulse Power Dissipation: 200W
| Delivery and price | |
|---|---|
| Units per pack | 1000 |
| Price | 0.222 € |
| Current stock | 100+ |
| Lead time | 30 days |
Datasheet
uClamp0501P µClamp[TM] 1-Line ESD protection ## **PROTECTION PRODUCTS** - MicroClamp[TM] ## Description The µClamp[TM] series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDAs. It features large cross-sectional area junctions for conducting high transient currents. It offers superior electrical characteristics such as lower clamping voltage and no device degradation when compared to MLVs. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClamp[TM] 0501P is in a 2-pin, RoHS/WEEE compliant, SLP1006P2 package. It measures 1.0 x 0.6 x 0.5mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 5 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical. They may be used to meet the ESD immunity requirements of IEC 610004-2, Level 4 (±15kV air, ±8kV contact discharge). The combination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and MP3 players. ## Features - Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (tp = 5/50ns) Cable Discharge Event (CDE) - Ultra-small package (1.0 x 0.6 x 0.5mm) - Protects one I/O or power line - Low clamping voltage - Working voltage: 5V - Low leakage current - Solid-state silicon-avalanche technology ## Mechanical Characteristics - SLP1006P2 package - RoHS/WEEE Compliant - Nominal Dimensions: 1.0 x 0.6 x 0.5 mm - Lead Finish: NiPdAu - Molding compound flammability rating: UL 94V-0 - Marking : Marking code, cathode band - Packaging : Tape and Reel ## Applications - Cellular Handsets & Accessories - Personal Digital Assistants (PDAs) - Notebooks & Handhelds - Portable Instrumentation - Digital Cameras - Peripherals - MP3 Players **==> picture [264 x 184] intentionally omitted <==** **----- Start of picture text -----**<br> Dimensions<br>1.0<br>0.60<br>0.65<br>0.50<br>**----- End of picture text -----**<br> **==> picture [131 x 10] intentionally omitted <==** **----- Start of picture text -----**<br> Nominal Dimensions (mm)<br>**----- End of picture text -----**<br> ## Schematic & PIN Configuration **==> picture [15 x 19] intentionally omitted <==** **----- Start of picture text -----**<br> 2<br>**----- End of picture text -----**<br> 1 SLP1006P2 (Bottom View) www.semtech.com Revision 10/11/2007 1 uClamp0501P ## PROTECTION PRODUCTS ## Absolute Maximum Rating |PROTECTION PRODUCTS<br>Absolute Maximum Rating|||| |---|---|---|---| |g<br>n<br>it<br>a<br>R|l<br>o<br>b<br>m<br>y<br>S|e<br>ul<br>a<br>V|s<br>ti<br>n<br>U| |)s<br>µ<br>0<br>2<br>/<br>8<br>=<br>p<br>t(<br>r<br>e<br>w<br>o<br>P<br>e<br>slu<br>P<br>k<br>a<br>e<br>P|P k<br>p|0<br>0<br>2|stt<br>a<br>W| |(<br>t<br>n<br>e<br>rr<br>u<br>C<br>e<br>slu<br>P<br>k<br>a<br>e<br>P<br>m<br>u<br>m<br>ix<br>a<br>M<br>)s<br>µ<br>0<br>2<br>/<br>8<br>=<br>p<br>t|I p<br>p|6<br>1|s<br>p<br>m<br>A| |)riA<br>(<br>2<br>-<br>4<br>-<br>0<br>0<br>0<br>1<br>6<br>C<br>EI<br>r<br>e<br>p<br>D<br>S<br>E<br>)tc<br>a<br>t<br>n<br>o<br>C<br>(<br>2<br>-<br>4<br>-<br>0<br>0<br>0<br>1<br>6<br>C<br>EI<br>r<br>e<br>p<br>D<br>S<br>E|V<br>D<br>S<br>E|0<br>2<br>-/<br>+<br>5<br>1<br>-/<br>+|V<br>k| |e<br>r<br>u<br>t<br>a<br>r<br>e<br>p<br>m<br>e<br>T<br>g<br>nit<br>a<br>r<br>e<br>p<br>O|TJ|5<br>2<br>1<br>+<br>o<br>t<br>5<br>5<br>-|C<br>°| |e<br>r<br>u<br>t<br>a<br>r<br>e<br>p<br>m<br>e<br>T<br>e<br>g<br>a<br>r<br>o<br>t<br>S|T<br>G<br>T<br>S|0<br>5<br>1<br>+<br>o<br>t<br>5<br>5<br>-|C<br>°| ## Electrical Characteristics (T=25[o] C) |Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)|Electrical Characteristics (T=25oC)| |---|---|---|---|---|---|---| |||||||| |r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P|l<br>o<br>b<br>m<br>y<br>S|s<br>n<br>oiti<br>d<br>n<br>o<br>C|m<br>u<br>m<br>i<br>n<br>i<br>M|l<br>a<br>ci<br>p<br>y<br>T|m<br>u<br>m<br>ix<br>a<br>M|s<br>ti<br>n<br>U| |e<br>g<br>a<br>tlo<br>V<br>ff<br>O<br>-<br>d<br>n<br>a<br>t<br>S<br>e<br>sr<br>e<br>v<br>e<br>R|V<br>M<br>W<br>R||||5|V| |e<br>g<br>a<br>tlo<br>V<br>n<br>w<br>o<br>d<br>k<br>a<br>e<br>r<br>B<br>e<br>sr<br>e<br>v<br>e<br>R|V R<br>B|It<br>A<br>m<br>1<br>=|6|||V| |t<br>n<br>e<br>rr<br>u<br>C<br>e<br>g<br>a<br>k<br>a<br>e<br>L<br>e<br>sr<br>e<br>v<br>e<br>R|IR|V<br>M<br>W<br>R<br>C<br>°<br>5<br>2<br>=<br>T<br>,V<br>5<br>=|||5|A<br>µ| |e<br>g<br>a<br>tlo<br>V<br>d<br>r<br>a<br>w<br>r<br>o<br>F|VF|IF<br>A<br>m<br>0<br>1<br>=||0<br>8<br>.<br>0||V| |e<br>g<br>a<br>tlo<br>V<br>g<br>nip<br>m<br>alC|VC|I P<br>P<br>t<br>,<br>A<br>5<br>=<br>p<br>s<br>µ<br>0<br>2<br>/<br>8<br>=|||8<br>.<br>9|V| |e<br>g<br>a<br>tlo<br>V<br>g<br>nip<br>m<br>alC|VC|I P<br>P<br>t<br>,<br>A<br>6<br>1<br>=<br>p<br>s<br>µ<br>0<br>2<br>/<br>8<br>=|||5<br>.<br>2<br>1|V| |e<br>c<br>n<br>a<br>tic<br>a<br>p<br>a<br>C<br>n<br>oitc<br>n<br>u<br>J|Cj|VR<br>z<br>H<br>M<br>1<br>=<br>f<br>,V<br>0<br>=|||0<br>6<br>1|F<br>p| www.semtech.com 2007 Semtech Corp. 2 uClamp0501P ## PROTECTION PRODUCTS ## Typical Characteristics ## Non-Repetitive Peak Pulse Power vs. Pulse Time **==> picture [241 x 160] intentionally omitted <==** **----- Start of picture text -----**<br> 10<br>PSST TTT<br>1<br>I<br>0.1 PT ST<br>a cr<br>ee<br>0.01 ee ll<br>0.1 1 10 100 1000<br>Pulse Duration - tp (us)<br> (kW)<br>PP<br>Peak Pulse Power - P<br>**----- End of picture text -----**<br> ## Clamping Voltage vs. Peak Pulse Current **==> picture [240 x 381] intentionally omitted <==** **----- Start of picture text -----**<br> 11<br>10<br>9<br>8<br>7<br>6<br>Err ereesatet<br>5<br>FERRE EEE EEE EEE<br>43 PoyPottP| tTtT tTtTtT tpfoetoeettytp pttpty tpyt Waveform<br> Parameters:<br>2<br>PERE EERE tr = 8µs<br>1 td = 20µs<br>0<br>0 5 10 15 20<br>Peak Pulse Current - IPP (A)<br>Normalized Capacitance vs. Reverse Voltage<br>1.1<br>f = 1 MHz<br>1<br>0.9<br>0.8<br>0.7<br>0.6<br>0.5<br>0.4<br>0.3<br>0.2<br>0.1<br>0<br>0 1 2 3 4 5<br>Reverse Voltage - VR (V)<br> (V)<br>C<br>Clamping Voltage - V<br>=0)<br>R<br>(V) / CJ<br>R<br>(VCJ<br>**----- End of picture text -----**<br> ## Power Derating Curve **==> picture [241 x 159] intentionally omitted <==** **----- Start of picture text -----**<br> 110<br>100<br>90<br>80 ee<br>70<br>60<br>50<br>40 J PJ<br>30<br>20100 aes<br>0 25 50 75 100 125 150<br>Ambient Temperature - TA ( [o] C)<br>PP<br>% of Rated Power or I<br>**----- End of picture text -----**<br> ## Forward Voltage vs. Forward Current **==> picture [237 x 157] intentionally omitted <==** **----- Start of picture text -----**<br> 3.5 [oT<br>3<br>2.5<br>2<br>Slits<br>1.5<br>=Soo=— =e<br>Waveform<br>1 Seca Parameters:<br>tr = 8µs<br>[oT td = 20µs<br>0.5 Sa<br>0 L--} — ) ——} —- — —<br>0 5 10 15 20<br>Forward Current - IF (A)<br> (V)Forward Voltage - VF<br>**----- End of picture text -----**<br> ## ESD Clamping (8kV Contact per IEC 61000-4-2) Note: Data is taken with a 10x attenuator www.semtech.com 2007 Semtech Corp. 3 uClamp0501P ## PROTECTION PRODUCTS ## Applications Information ## Device Connection Options These TVS diodes are designed to protect one data, I/O, or power supply line. The device is unidirectional and may be used on lines where the signal polarity is above ground. The cathode band should be placed towards the line that is to be protected. ## Circuit Board Layout Recommendations for Suppression of ESD. ## Circuit Diagram **==> picture [26 x 9] intentionally omitted <==** **----- Start of picture text -----**<br> Pin 2<br>**----- End of picture text -----**<br> **==> picture [43 x 42] intentionally omitted <==** Good circuit board layout is critical for the suppression of ESD induced transients. The following guidelines are recommended: - Place the TVS near the input terminals or connectors to restrict transient coupling. **==> picture [27 x 9] intentionally omitted <==** **----- Start of picture text -----**<br> Pin 1<br>**----- End of picture text -----**<br> - Minimize the path length between the TVS and the protected line. - Minimize all conductive loops including power and ground loops. - The ESD transient return path to ground should be kept as short as possible. - Never run critical signals near board edges. - Use ground planes whenever possible. www.semtech.com 4 2007 Semtech Corp. uClamp0501P ## PROTECTION PRODUCTS ## Applications Information - Spice Model **==> picture [130 x 88] intentionally omitted <==** uClamp0501P Spice Model |s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>P<br>1<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>u|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>P<br>1<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>u|s<br>r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P<br>e<br>ci<br>p<br>S<br>P<br>1<br>0<br>5<br>0<br>p<br>m<br>al<br>C<br>u| |---|---|---| |r<br>e<br>t<br>e<br>m<br>a<br>r<br>a<br>P|ti<br>n<br>U|)<br>S<br>V<br>T<br>(<br>1<br>D| |S<br>I|p<br>m<br>A|2<br>1<br>-e<br>3<br>5<br>.<br>2| |V<br>B|tlo<br>V|8<br>0<br>.7| |J<br>V|tlo<br>V|1<br>7<br>.<br>0| |S<br>R|m<br>h<br>O|9<br>2<br>1.<br>0| |V<br>B<br>I|p<br>m<br>A|3<br>-<br>E<br>0<br>.<br>1| |O<br>J<br>C|d<br>a<br>r<br>a<br>F|2<br>1<br>-e<br>5<br>.<br>3<br>4<br>1| |T<br>T|c<br>e<br>s|9<br>-<br>E<br>1<br>4<br>5<br>.<br>2| |M|--|5<br>8<br>3<br>.<br>0| |N|--|1.<br>1| |G<br>E|V<br>e|1<br>1.<br>1| www.semtech.com 2007 Semtech Corp. 5 uClamp0501P ## PROTECTION PRODUCTS ## Outline Drawing - SLP1006P2 **==> picture [540 x 311] intentionally omitted <==** **----- Start of picture text -----**<br> B<br>A D<br>DIMENSIONS<br>E INCHES MILLIMETERS<br>DIM<br>MIN NOM MAX MIN NOM MAX<br>A .016 .020 .022 0.40 0.50 0.55<br>A1 .000 .001 .002 0.00 0.03 0.05<br>TOP VIEW b .018 .020 .022 0.45 0.50 0.55<br>D .035 .039 .043 0.90 1.00 1.10<br>E .020 .024 .028 0.50 0.60 0.70<br>e .026 BSC 0.65 BSC<br>A L .008 .010 .012 0.20 0.25 0.30<br>SEATING R .002 .004 .006 0.05 0.10 0.15<br>aaa C PLANE N 2 2<br>aaa .003 0.08<br>A1 C bbb .004 0.10<br>PIN 1 ID<br>R<br>bxN<br>bbb C A B<br>2x L<br> e<br>BOTTOM VIEW<br>NOTES:<br>1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES).<br>**----- End of picture text -----**<br> ## Land Pattern - SLP1006P2 **==> picture [143 x 94] intentionally omitted <==** **----- Start of picture text -----**<br> Y<br>(C) G Z<br>X<br>**----- End of picture text -----**<br> **==> picture [188 x 87] intentionally omitted <==** **----- Start of picture text -----**<br> DIMENSIONS<br>DIM INCHES MILLIMETERS<br>C (.033) (0.85)<br>G .012 0.30<br>X .024 0.60<br>Y .022 0.55<br>Z .055 1.40<br>**----- End of picture text -----**<br> ## NOTES: 1. CONTROLLING DIMENSIONS ARE IN MILLIMETERS (ANGLES IN DEGREES). 2. THIS LAND PATTERN IS FOR REFERENCE PURPOSES ONLY. CONSULT YOUR MANUFACTURING GROUP TO ENSURE YOUR COMPANY'S MANUFACTURING GUIDELINES ARE MET. www.semtech.com 2007 Semtech Corp. 6 uClamp0501P ## PROTECTION PRODUCTS ## Marking Code 5P ## PIN 1 ID ## Ordering Information |r<br>e<br>b<br>m<br>u<br>N<br>tr<br>a<br>P|g<br>n<br>i<br>k<br>r<br>o<br>W<br>e<br>g<br>a<br>tl<br>o<br>V|r<br>e<br>p<br>y<br>t<br>Q<br>l<br>e<br>e<br>R| |---|---|---| |T<br>C<br>T.P<br>1<br>0<br>5<br>0<br>p<br>m<br>alC<br>u|V<br>5|0<br>0<br>0<br>,<br>3| ## Notes: 1) This is a lead-free, RoHS/WEEE compliant product MicroClamp, uClamp and µClamp are marks of Semtech Corporation Note: Cathode bar at Pin 2 ## Tape and Reel Specification ## Cathode Bar ## User Direction of feed Device Orientation in Tape |A|A|A|0|0<br>B||||0<br>K||||||||||||||||| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |-/<br>+<br>9<br>6<br>.<br>0||m<br>m<br>0<br>1.<br>0||0<br>1.<br>0<br>-/<br>+<br>9<br>1.<br>1|m<br>m<br>.<br>0||6<br>6|m<br>m<br>0<br>1.<br>0<br>-/<br>+||||||||||||||||| |||||||||||||||||||||||||| |e<br>p<br>a<br>T<br>h<br>t<br>di<br>W|||)x<br>a<br>M<br>(<br>,<br>B|D|1<br>D|||E|||F||P||0<br>P|||2<br>P|||T|||W| |m<br>m<br>8|||m<br>m<br>2<br>.<br>4<br>)<br>5<br>6<br>1.(|m<br>m<br>1.<br>0<br>+<br>5<br>.<br>1<br>m<br>m<br>0<br>.<br>0<br>-<br>5<br>0<br>0<br>.<br>+<br>9<br>5<br>.<br>0<br>(<br>)<br>0<br>0<br>0<br>.-|m<br>m<br>4<br>.<br>0<br>5<br>2<br>.<br>0<br>±<br>)<br>1<br>3<br>0<br>.(||0<br>1.<br>±<br>0<br>5<br>7<br>.<br>1<br>m<br>m<br>)<br>4<br>0<br>0<br>.<br>±<br>9<br>6<br>0<br>.(|||5<br>0<br>.<br>0<br>±<br>5<br>.<br>3<br>m<br>m<br>)<br>2<br>0<br>0<br>.<br>±<br>8<br>3<br>1.(||0<br>1.<br>0<br>±<br>0<br>.<br>4<br>m<br>m<br>-<br>0<br>0<br>.<br>±<br>7<br>5<br>1.(<br>)<br>4||1.<br>0<br>±<br>0<br>.<br>4<br>m<br>m<br>-<br>0<br>0<br>.<br>±<br>7<br>5<br>1.(<br>)<br>4||.(|5<br>0<br>.<br>0<br>±<br>0<br>.<br>2<br>m<br>m<br>)<br>2<br>0<br>0<br>.<br>±<br>9<br>7<br>0||2<br>0<br>.<br>0<br>±<br>4<br>5<br>2<br>.<br>0<br>)<br>6<br>1<br>0<br>.(<br>m<br>m||||m<br>m<br>0<br>.<br>8<br>m<br>m<br>3<br>.<br>0<br>+<br>m<br>m<br>1.<br>0<br>-<br>)<br>2<br>1<br>0<br>.<br>±<br>2<br>1<br>3<br>.(|| ## Contact Information Semtech Corporation Protection Products Division 200 Flynn Rd., Camarillo, CA 93012 Phone: (805)498-2111 FAX (805)498-3804 www.semtech.com 2007 Semtech Corp. 7
Updated at April 15, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →