TTR700BMSB7B-2.0FL-CTR

## Through the Roller Sensor Family 

## Datasheet 

- Reliable leading edge detection of letters, thin packages, poly bags, totes, boxes or other product on roller conveyors 

- Mounts between conveyor roller gap to standard hex or round side rail holes with no extra hardware required or on the T-Slot with customer supplied bracket and hardware 

- Spring loaded end caps reduce installation and alignment time for reduced labor costs 

- Built to order with specified length and beam spacing: 200 mm to 965 mm (8 in to 38 in) with 2 to 7 sensors for maximum flexibility 

- Robust aluminum housing, ambient light and ESD resistance for enhanced durability 

WARNING: 

- Do not use this device for personnel protection 

- Using this device for personnel protection could result in serious injury or death. 

- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or deenergized (off) output condition. 

## Models 

**==> picture [497 x 92] intentionally omitted <==**

**----- Start of picture text -----**<br>
First Beam Distance<br>Between Frame from Cable End Cap<br>Model Name Distance (mm)  Output Type Special Feature Beam Spacing No. of Beams End Cap Style Cable Length (m) Connector Style (mm)<br>TTR 384 AP S A 6 T - 2.0 FL - CTR<br>200 mm - 965 mm BM = Bimodal S = Standard A = 54 mm 1,2,3,4,5,6,7 A,B,C,D,E,F,G,T 0.5 m, 1.0 m, 2.0 m FL = Flying Leads<br>AP = Light Operate PNP G = Ground Strap B = 93.1 mm RJ = RJ11 CTR =  Beams centered<br>AN = Light Operate NPN C = 108 mm Q5 = M12 between frames<br>RP = Dark Operate PNP D = 162 mm Q3 = M8 059-200 =  First beam distance<br>RN = Dark Operate NPN E = 186.2 mm from cable end cap<br>Model Name  =  TTR    384    AP    S     A     6    T    -    2.0  FL  -  CTR<br>**----- End of picture text -----**<br>


Note: For definition of the End Cap Styles, see Table 1 on p. 2. 

## Configurations 

**==> picture [415 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
Between Frame Distance<br>First Beam  Beam<br>Frame Distance Spacing Indicator  Frame<br>LED<br>Cable  Spring<br>End Cap End Cap<br>Figure 1. Spring End Cap Configuration<br>**----- End of picture text -----**<br>


Original Document 216696 Rev. B 

22 June 2020 

216696 

Through the Roller Sensor Family 

**==> picture [420 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
Between Frame Distance<br>First Beam  Beam<br>Frame Distance Spacing Indicator  Frame<br>LED<br>Cable  Plug<br>End Cap End Cap<br>**----- End of picture text -----**<br>


Figure 2. T-Slot Configuration 

Table 1: End Cap Styles 

**==> picture [502 x 482] intentionally omitted <==**

**----- Start of picture text -----**<br>
End Cap End 1 End 2<br>Style<br>A 11 mm Hex, Spring 11 mm hex /<br>flat side up 8 mm round<br>B 11 mm Hex, Spring 11 mm hex /<br>point up 8 mm round<br>C Adjustable 11 Spring 11 mm hex /<br>mm Hex, can 8 mm round<br>be positioned<br>in 10 degree<br>increments<br>D 11 mm Hex, Spring 8 mm round<br>flat side up<br>E 11 mm Hex, Spring 8 mm round<br>point up<br>F Adjustable 11 Spring 8 mm round<br>mm Hex, can<br>be positioned<br>in 10 degree<br>increments<br>G Adjustable 11 Spring 11 mm hex /<br>mm Hex, can 8 mm round /<br>be positioned adhesive backed<br>in 10 degree bracket<br>increments /<br>adhesive<br>backed<br>bracket<br>T 11 mm Hex, Plug<br>flat side up<br>**----- End of picture text -----**<br>


Note: T-Slot mounted sensors with the T End Cap Style are 6 mm shorter than the specified Between Frame Distance. 

P/N 216696 Rev. B 

www.bannerengineering.com - Tel: + 1 888 373 6767 

2 

Through the Roller Sensor Family 

## Wiring 

## Bimodal Output Wiring Diagrams 

**==> picture [413 x 197] intentionally omitted <==**

**----- Start of picture text -----**<br>
BN 18-30 V DC BU 18-30 V DC<br>PNP PNP<br>PNP NO, LO PNP NC, DO<br>BK BK<br>BU 0 V BN 0 V<br>WH No Connection WH No Connection<br>BN 18-30 V DC BU 18-30 V DC<br>NPN NPN<br>NPN NO, LO NPN NC, DO<br>BK BK<br>BU 0 V BN 0 V<br>WH No Connection WH No Connection<br>**----- End of picture text -----**<br>


Fixed NPN and PNP Output Wiring Diagrams: Light and Dark Operate by Model Number 

**==> picture [175 x 87] intentionally omitted <==**

**----- Start of picture text -----**<br>
BN 18-30 V DC<br>PNP<br>PNP<br>BK<br>BU 0 V<br>WH No Connection<br>**----- End of picture text -----**<br>


**==> picture [500 x 132] intentionally omitted <==**

**----- Start of picture text -----**<br>
BN 18-30 V DC BN 18-30 V DC<br>NPN PNP<br>NPN PNP<br>BK BK<br>BU 0 V BU 0 V<br>WH No Connection WH No Connection<br>RJ-11 Pinout RJ-11 Key<br>**----- End of picture text -----**<br>


**==> picture [21 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
4<br>3<br>2<br>1<br>**----- End of picture text -----**<br>


1. Brown 2. Black 3. White 4. Blue 

## M12 Pinout M12 Key 

**==> picture [77 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
1<br>2<br>4<br>3<br>**----- End of picture text -----**<br>


1. Brown 

2. White 

3. Blue 4. Black 

P/N 216696 Rev. B 

www.bannerengineering.com - Tel: + 1 888 373 6767 

3 

Through the Roller Sensor Family 

**==> picture [240 x 63] intentionally omitted <==**

**----- Start of picture text -----**<br>
M8 Pinout<br>2 4<br>1 3<br>**----- End of picture text -----**<br>


- M8 Key 1. Brown 2. White 3. Blue 4. Black 

## T-Slot Installation 

**==> picture [148 x 86] intentionally omitted <==**

**----- Start of picture text -----**<br>
Bracket<br>3<br>Ø 4<br>[0.16]<br>**----- End of picture text -----**<br>


## Specifications 

Supply Voltage Sensing Mode 18 V DC to 30 V DC (24 V nominal with 10% maximum ripple) Diffuse, Infrared, 940 nm Use only with a suitable Class 2 power supply (UL) or SELV power supply Range (CE) 0 to ≥ 120 mm on 90% white card Supply Current 0 to ≥ 50 mm on 18% gray card 45 mA ≤ 3 to ≥ 30 mm on 6% black card Supply Protection Circuitry Operating Conditions Protected against reverse polarity and transient voltages –10 °C to +55 °C (+14 °F to +131 °F) Wavelength Environmental Rating Infrared LED, 940 nm IEC IP50 Output Response Vibration and Mechanical Shock 1 ms on/off All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MILSTD-202F, Method 201A (Vibration: 10 Hz to 60 Hz, 0.5 mm peak-to-peak) Output Confguration Shock: 30G 11 ms duration, half sine wave per IEC 60068-2-27 Rating: 100 mA max output at 25 °C Output Voltage High: Greater than Vsupply – 2.5 V Certifcations Output Voltage Low: Less than 2.5 V For loads less than 1 Meg Ohm Protected against false pulse on power-up and continuous overload or **E224071** short-circuit of output Indicators Amber on: Light sensed 

P/N 216696 Rev. B 

www.bannerengineering.com - Tel: + 1 888 373 6767 

4 

Through the Roller Sensor Family 

## Performance Curves 

**==> picture [194 x 150] intentionally omitted <==**

**----- Start of picture text -----**<br>
Average Sensor Beam Pattern<br>Perpendicular to Conveyor Axis<br>8<br>6 TEXT]. PPT<br>42 wTI~<br>0 AN<br>-2 NE<br>a<br>-4<br>-6<br>P| NN Az<br>-8<br>0 | 20 | 40 | 60 rf} 80 100 120 | 140 | tt 160 180<br>Distance to Target (mm)<br>_ 90% White 6% Black<br>Beam Width (mm)<br>**----- End of picture text -----**<br>


**==> picture [198 x 159] intentionally omitted <==**

**----- Start of picture text -----**<br>
90% Reflectivity White Card<br>100<br>Ss [Tt]<br>PT a ONT PT<br>10<br>741<br>|<br>1 a|<br>1 10 100 1000<br>Distance (mm)<br>Excess Gain<br>**----- End of picture text -----**<br>


## Dimensions 

All measurements are listed in millimeters, unless noted otherwise. 

**==> picture [74 x 126] intentionally omitted <==**

**----- Start of picture text -----**<br>
12.0<br>3.0 18.6<br>@}<br>4.2<br>7.2<br>End View<br>**----- End of picture text -----**<br>


P/N 216696 Rev. B 

www.bannerengineering.com - Tel: + 1 888 373 6767 

5 

Through the Roller Sensor Family 

## Banner Engineering Corp. Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved