Image not available
Illustrative purposes only
TP1016-DIM
LED Driver, 24 W, 12 VDC, 2 A, Constant Voltage, 100 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TIGER POWER SUPPLIES
- Product type: AC / DC LED Power Supplies
- SVHC: To Be Advised
- Product Range: Tiger Power Supplies - LED Drivers
- Output Current: 2A
- LED Driver Mode: Constant Voltage
- Output Power Max: 24W
- Input Voltage Max: 240V
- Input Voltage Min: 100V
- Output Voltage Max: 12VDC
- Power Supply Applications: -
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 18.74 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## 12vdc 2A (24W) LED PWM Dimmer with ON/OFF switch TIGER PART: TP1016-DIM - Supplied with fixed UK AC mains cable - Universal 100-240vac input voltage - Simply turn the dial dimmer to dim or brighten - On / Off function using the same rotary dial - Works to control any constant voltage 12V LED Strip The Tiger Power TP1016-DIM is a power supply supplied complete with a PWM dial dimmer switch which can be used to adjust the brightness level of any 12V constant voltage LED lighting, including LED strip, up to 2A (24W) max. Its supplied complete with integral UK mains lead. The screw holes which are integral to the plastic enclosure enable the power supply to be fixed down. Approved to latest safety and efficiency standards |Part number (UK version):|TP1016-DIM| |---|---| |Part number (UK version):<br>Part number (Bare end input version):|TP1016-DIM-BE| |Part number (Bare end input version):<br>Part number (European input cable version):|TP1016-DIM-EURO| |Part number (European input cable version):<br>Input voltage:|100-240vac (90-264vac max.)| |Input voltage:<br>Input frequency:|240vac (90264vac max.)<br>47-63Hz| |Input frequency:<br>Output voltage:|12vdc| |Output voltage:<br>Current:|2A| |Power :|24 Watts| |Protection:|Short Circuit, Over voltage| |Dimensions:|Short Circuit, Over voltage<br>95 x 43 x 30mm| |Weight:|180g| |Weight:<br>AC cord length:|180g<br>1.5 metres| |AC cord length:<br>DC cord length:|1.5 metres + 30cm push on dimmer switch (total 180cm)| |DC cord length:<br>DC connector:|1.5 metres + 30cm push on dimmer switch (total 180cm)<br>2.1 x 5.5 x 12mm (Female)| |Polarity:|2.1 x 5.5 x 12mm (Female)<br>+ve (positive) centre| |Polarity:<br>Efficiency:|+ve (positive) centre<br>83%| |Efficiency:<br>Input current RMS Max.:|0.5A| |Input current RMS Max.:<br>Inrush Current at 230vac:|40A| |Leakage current:|<0.25mA| |Leakage current:<br>Safety approval:|EN62368-1| |Safety approval:<br>M.T.B.F:|50,000 hours| |Operating temperature:|50,000 hours<br>0°C to + 40°C| ## TIGER POWER PRODUCTS – QUALITY & RELIABILITY This specification is not for general release or circulation. Tiger Power reserves the right to make changes to spec. or product without notice or liability. Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 W: www.TigerPowerSupplies.com E: info@TigerPowerSupplies.com ## 12vdc 2A (24W) LED PWM Dimmer with ON/OFF switch ## TIGER PART: TP1016-DIM - Example set up shown below TIGER POWER PRODUCTS – QUALITY & RELIABILITY This specification is not for general release or circulation. Tiger Power reserves the right to make changes to spec. or product without notice or liability. Tiger Power Supplies, Henley-On-Thames, RG9 1UY, UK, T: (0) 1491 522 711 W: www.TigerPowerSupplies.com E: info@TigerPowerSupplies.com
Updated at April 17, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →