TLP-91311/A/ST

## **- MODEL TLP 91311/A/ST** 

Ordering: P/N 61913111650              Termination: Soldering Tags 

## **TECHNICAL DATA** 

(Typical values @+25ºC for batteries stored for one year or less) 

Capacity to 3.0V (@250mA  @1% duty cycle) 2.4 Ah Open Circuit voltage 3.6 V Maximum 1 second pulse to 3.0V 1 A Maximum pulse length @125mA to 2.8V 1000 sec Delay time to 3.0V @125mA No Delay Weight 40 gr Operating temperature range -40ºC to +85ºC Capacity retention after 10 years 90% 

- _**HIGH ENERGY**_ 

- _**UP TO 1A PULSE CAPABILITY**_ 

- _**INSTANT VOLTAGE RESPONSE**_ 

**==> picture [545 x 522] intentionally omitted <==**

**----- Start of picture text -----**<br>
Volts VOLTAGE VS. PULSE DURATION<br>3.6 100 mA<br>250 mA<br>3.5 500 mA<br>3.4<br>3.3 Diameter (max.) – 16.5 mm<br>Length (max.) – 75 mm<br>3.2<br>3.1<br>3.0<br>2.9<br>2.8<br>0.001 0.01 0.1 1 10 100 1000 10000<br>Pulse Duration [sec]<br>Min. Voltage vs. Temp. for 1 sec Pulse Max. Pulse Width to Min. Voltage of 2.8V<br>1.1<br>3.6<br>1.0 0ºC +25ºC +85ºC<br>3.4<br>0.9<br>3.2 0.8<br>3.0 0.7 -20ºC<br>0.6<br>2.8<br>0.5<br>2.6 100 mA 0.4 -40ºC<br>0.3<br>2.4<br>0.2<br>2.2 200 mA 300 mA 0.1<br>2.0 0.0<br>-60 -40 -20 0 20 40 60 80 0.01 0.1 1 10 100 1000<br>Temperature [ºC] Pulse Duration [sec]<br>i KN<br>For H ic at io ns<br>ae ig h Pulse Current Appl<br>Note: Any presentations in this data sheet concerning performance are for information purpose only and are not construed as<br>warranties either expressed or implied, of future performance.  ECN 6100625 Rev. D June/07<br>A][<br>VVoltage ][<br>Pulse Amplitude<br>**----- End of picture text -----**<br>


Page 1 of 2 

## **[MODEL TLP][-][91311/A/ST]** — 

**TECHNICAL DATA** The battery is designed specifically for applications requiring low background currents combined with high current pulses. The Pulses Plus(Typical values @+25ºC for batteries stored for one year or less) ™ battery combines the inherent benefits of bobbin type Lithium Thionyl Chloride cell with a novel hermetically sealed Hybrid Layer Capacitor (HLC). The addition of the HLC enhances the performance of the Lithium Thionyl Chloride cell to meet large pulse current requirements, thus providing greater performance : ~~OO Ic ¥~~ and safety in comparison to jellyroll construction (spirally wound) type batteries. | Li Primary “ ~~T~~ Htc | * The PTC is optional and not necessary in many cases. ~~| cell |~~ 

**==> picture [525 x 425] intentionally omitted <==**

**----- Start of picture text -----**<br>
Volts DISCHARGE CHARACTERISTICS @ +25ºC<br>4.0<br>3.5<br>3.0<br>2.5<br>2.0<br>200  Ω 1.8 KΩ 6.8 KΩ 36 KΩ 180 KΩ<br>~16 mA ~2 mA ~0.5 mA ~0.1 mA ~20  μA<br>1.5 (1.3 Ah) (2.4 Ah) (2.4 Ah) (2.22 Ah) (2.00 Ah)<br>1.0<br>1 10 100 1000 10000 100000<br>Hours<br>Self Discharge vs. Temperature [ [Ah] ] Capacity vs. Current<br>10.0 2.5<br>Maximum<br>2.3<br>8.0<br>- 30°C<br>2.1<br>6.0 Typical 0°C<br>1.9<br>25°C<br>4.0<br>1.7<br>2.0 1.5 50 °C<br>72°C<br>0.0 1.3<br>20 40 60 80 0.01 0.1 1<br>Temperature [ºC] Current [mA]<br>Annual Capacity Loss %][<br>**----- End of picture text -----**<br>


## _**For H**_ ~~_**ic**_~~ _**at**_ ~~_**io**_~~ _**ns**_ ~~_**ig**_~~ _**h Pulse Current Appl**_ 

Note: Any presentations in this data sheet concerning performance are for information purpose only and are not construed as warranties either expressed or implied, of future performance. ECN 6100625  Rev. D June/07 

ECN 6100625  Rev. D June/07 

Page 2 of 2