TL50-W-815

## **SENSOR WITH RGB LED EMISSION AND PLASTIC HOUSING** 

## 

- _**[High resolution and RGB LED emission with automatic colour selection]**_ 

- _**[Very fast switching frequency and low response time]**_ 

- _**[Easy sensor setting by means of two pushbuttons Mark/Bkgd]**_ 

- _**[Sturdy plastic housing with standard dimensions and fixing holes]**_ 

## **TL50 SERIES** 

The **TL50** contrast sensor line offers the best solution for all the applications where cost reduction is requested, without compromising the excellent detection performances. The optimised optics of these sensors, the RGB LED emission with automatic colour selection and the very fine resolution, allow the detection of the weakest contrast of colours or grayscale between mark and background, or between different objects or surfaces. 

The high resolution is not a limit for the detection speed, reaching 33 ms response time and 15 kHz switching frequency. 

Thanks to only two 'Mark' and 'Bkgd' push-buttons for the different signal acquisition, the automatic threshold setting is very easy and accurate. 

**TL50** sensors can find typical applications on packaging machinery for food, cosmetic or pharmaceutical goods, for the detection of print registration marks, labels or other references on plastic films or packages, even on transparent material. 

Thanks to the compact dimensions and multiple fixing holes with metallic inserts present in standard positions, the sturdy ABS plastic housing is fully compatible and can replace the most traditional contrast sensors, as well as offering an interesting cost reduction. The special PMMA plastic lens, that can be fixed either in an axial or lateral position, is suitable for sensor use in the food industry, where the presence of glass parts must be avoided. 

## **TL50 SERIES** 

## **SETTING** 

## **DIMENSIONS** 

**The acquisition of the mark and background signals is made by pressing the MARK and BKGD push-buttons.** 

**The switching threshold level is set automatically between the mark and background values.** 

**The Dark/Light operating mode is selected by the sensor on the ground of the lower or higher mark reflectivity with respect to the background.** 

**When the green LED turns on the setting has been successfully completed and the sensor is ready, whereas the LED blinking indicates a setting failure or an insufficient contrast between mark and background.** 

**==> picture [245 x 302] intentionally omitted <==**

**----- Start of picture text -----**<br>
BKGD push button<br>DELAY LED<br>READY LED<br>OUTPUT LED<br>MARK push-button<br>6.3 $0.1 16<br>hsPP at 52 4<br>Tl<br>N° 4 M5 Prof. 6mm max<br>| 23 |<br>N° 4 M5 Prof. 6mm max<br>LENS 9 mm<br>- as ail D Dy<br>CAP<br>**----- End of picture text -----**<br>


## **INDICATORS AND PUSH-BUTTONS** 

**==> picture [56 x 91] intentionally omitted <==**

**----- Start of picture text -----**<br>
D<br>E<br>B<br>A C<br>**----- End of picture text -----**<br>


**A** yellow  OUTPUT LED **D** MARK push-button CI O **B** green READY LED **E** BKGD push-button CI O **C** orange DELAY LED i” 

## **ACCESSORIES** 

## **CONNECTIONS** 

For d **edicated accessories** refer to the **ACCESSORIES** section of this catalogue. 

Refer also to **Connectors** of the **General Catalogue** . 

**==> picture [160 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
NPN OUTPUT + 10 ... 30 Vdc<br>(WHITE) (BROWN)<br>0V - PNP OUTPUT<br>(BLUE)<br>(BLACK)<br>**----- End of picture text -----**<br>


## **TECHNICAL DATA** 

|**Power supply:**|10**…**30 Vdc  , reverse polarity protection<br>1||
|---|---|---|
|**Ripple:**|2 Vpp max.||
|**Consumption:**|50 mA max. at 24Vdc||
|**Light emission:**|RGB LED(630nm red, 520nm green, 465nm blue)|2|
|**Spot dimension:**|1.5 x 5 mm at 9 mm||
|**Operating distance:**|9 mm||
|**Depth of field:**|± 3 mm (with standard 9 mm lens)||
|**Setting:**|MARK push-button||
||BKGD push-button||
|**Indicators:**|yellow OUTPUT LED||
||green READY LED||
||orange DELAY LED||
|**Output type:**|1 PNP output / 1 NPN output||
|**Output current:**|100 mA max.||
|**Saturation voltage:**|≤2 V||
|**Response time:**|33 µs||
|**Switching frequency:**|15 kHz||
|**Operating mode:**|dark/light automatic||
|**Timing function:**|0 ... 20 ms selectable||
|**Connections:**|4-pole M12 connector||
|**Electrical protection:**|class 2||
|**Mechanical protection:**|IP67||
|**Protection devices:**|A, B<br>3||
|**Housing material:**|ABS||
|**Lens material:**|PMMA||
|**Weight:**|90 g max.||
|**Operating temperature:**|-10…55°C||
|**Storage temperature:**<br>**Normativa di riferimento:**|-20…70°C<br>EN 60947-5-2||



## **TECHNICAL NOTES** 

> _1 Limit values_ 

> _2 Average life of 100.000 h with TA = +25_ ° _C_ 

> _3 A - reverse polarity protection B - overload and short-circuit protection_ 

**==> picture [100 x 21] intentionally omitted <==**

**----- Start of picture text -----**<br>
II3D<br>pending<br>**----- End of picture text -----**<br>


## **DETECTION DIAGRAMS** 

**==> picture [118 x 60] intentionally omitted <==**

**----- Start of picture text -----**<br>
mm<br>0 20 40<br>Standard 9 mm  lens<br>(1,5 x 5 mm spot  on the focus distance)<br>**----- End of picture text -----**<br>


**==> picture [113 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
mm<br>-<br>0 10 20 30<br>Accessory 18 mm  lens<br>(2 x 7 mm spot  on the focus distance)<br>**----- End of picture text -----**<br>


**MODEL SELECTION AND ORDER INFORMATION** 

**MODEL OPERATING DISTANCE** TL50-W-815 9 mm 

**ORDER N** ° 954651000 

## ~~ee~~ **ACCESSORY LENSES** 

## **DIMENSIONS** 

**==> picture [323 x 103] intentionally omitted <==**

**----- Start of picture text -----**<br>
8.5<br>9<br>4.8 5.5 4.5<br>Lens No.9 glass Lens No.9 PMMA Lens 18 mm glass<br>mm<br>Ø 18.8<br>Ø 25<br>Ø 25 M20x0.75 Ø 25 M20x0.75 M20x0.75<br>**----- End of picture text -----**<br>


## **ACCESSORY SELECTION AND ORDER INFORMATION** 

|**MODEL**<br>Lens No.9 glass<br>Lens No.9 PMMA<br>Lens No.18 glass|**DESCRIPTION**<br>glass lens with 9 mm focus<br>plastic lens with 9 mm focus<br>glass lens with 18 mm focus|**ORDER N°**<br>95ACC1020<br>95ACC2540<br>95ACC1030|
|---|---|---|



_Please refer also to_ _**Sensor Accessories**_ 

## 

## aZOME UNI EN ISO9001 UNI EN ISO14000 

## _**Distributed by:**_ 

## _**HEADQUARTERS**_ 

## **DATASENSOR SpA** 

via Lavino, 265 - 40050 Monte San Pietro, BO - Italy Tel. +39 051/6765611 • Fax +39 051/6759324 www.datasensor.com • e-mail info@datasensor.com 

DATASENSOR SpA endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. For correct installation and use DATASENSOR SpA can guarantee only the data indicated in the instruction manual supplied with the products.