TL15B4Q

TL15 In-Line Modular Tower Light Indicator Datasheet 

## Features 

The TL15 In-Line Modular Tower Light is a bright, ultra-small indicator that can be used as a standalone device or connected in-line with a tower light, sensor, or signal to give additional visual and audible indication. 

**==> picture [78 x 124] intentionally omitted <==**

- Modular, single color segmented 15 mm diameter indicator and audible 

- • Multiple devices can be connected together to form a tower light • Rugged overmolded indicator segment design meets IP65, IP67, and IP68 • Each model has a single specific pin that activates the LEDs or audible when signaled • TL15 tower light indicators are available in four colors: green, yellow, red, and blue • Indicator segments operate at 12 V DC or 24 V DC with bimodal inputs that can be wired as PNP or NPN devices 

- • Audible segments operate from 12 V DC to 30 V DC that can be wired as PNP devices 

## Models 

**==> picture [500 x 221] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models Segment Function (Input Active Pin) Connection<br>TL15G4Q Green (Pin 4)<br>TL15Y1Q Yellow (Pin 1)<br>TL15R2Q Red (Pin 2)<br>TL15B4Q Blue (Pin 4)<br>TL15G1Q Green (Pin 1)<br>TL15Y2Q Yellow (Pin 2) 5-pin male/female M12 quick-disconnect connectors<br>TL15R5Q Red (Pin 5)<br>TL15R1Q Red (Pin 1)<br>TL15R4Q Red (Pin 4)<br>TL15GYRQ Green (Pin 4), Yellow (Pin 1), Red (Pin 2)<br>TL15BGYRQ Blue (Pin 4), Green (Pin 1), Yellow (Pin 2), Red (Pin 5)<br>TL15A5Q Audible (Pin 5)<br>TL15A1Q Audible (Pin 1) 5-pin male M12 quick-disconnect connector<br>TL15A2Q Audible (Pin 2)<br>Indicator Segments: 5-pin male/female M12 quick-disconnect connectors<br>TL15GYRAQ Green (Pin 4), Yellow (Pin 1), Red (Pin 2), Audible (Pin 5)<br>Audible Segment: 5-pin male M12 quick-disconnect connector<br>**----- End of picture text -----**<br>


NOTE: Models with three or four assemblies are packaged in a kit with separate segments. 

## Wiring 

**==> picture [62 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Indicator Segments<br>**----- End of picture text -----**<br>


**==> picture [500 x 118] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wiring Pinouts Pin Wire Color Description*<br>1 Brown<br>gy (5)wh (2) Male 1 Female 2 24 WhiteBlack Active Bimodal Input Pin: 12 V DC or 24 V DC<br>bn (1) 2 1 5 Gray<br>bk (4) 12 or 24 V DC 4 3<br>bu (3) or 3 5 4 5 3 Blue DC Common<br>**----- End of picture text -----**<br>


*Continuity between male and female connection for all five wires, including IO-link communications. Each model activates from one input pin. See model table. 

**==> picture [52 x 31] intentionally omitted <==**

Original Instructions 07-May-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 227490 Rev. G 

TL15 In-Line Modular Tower Light Indicator Datasheet 

**==> picture [493 x 217] intentionally omitted <==**

**----- Start of picture text -----**<br>
Audible Segments<br>Wiring Pinout Pin Wire Color Description*<br>1 Brown<br>gy (5) 2 White<br>=—— Male Active PNP Input Pin: 12 V DC to 30 V DC<br>wh (2) 1 4 Black<br>— bn (1) 2 (x 5 Gray<br>bk (4) 12 – 30 V DC 4<br>bu (3) 3 5 3 Blue DC Common<br>=<br>Specifications<br>Supply Voltage Construction Required Overcurrent Protection<br>Indicator segments: 12 V DC (±10%) at 80 mA  Indicator segments:<br>maximum or 24 V DC (±10%) nominal at 40 mA  Coupling material: Nickel-plated brass<br>maximum Connector body: PVC diffuse white WARNING:  Electrical<br>Audible segments: 12 V DC to 30 V DC Audible segments: connections must be<br>12 V DC: 55 mA maximum Coupling material: Nickel-plated brass made by qualified<br>24 V DC: 30 mA maximum Connector body: PVC translucent black personnel in<br>30 V DC: 25 mA maximum accordance with local<br>**----- End of picture text -----**<br>


Construction Required Overcurrent Protection Indicator segments: Coupling material: Nickel-plated brass Connector body: PVC diffuse white WARNING: Electrical Audible segments: connections must be Coupling material: Nickel-plated brass made by qualified Connector body: PVC translucent black personnel in Audible housing: Nylon accordance with local A\ and national electrical Vibration and Mechanical Shock codes and Meets IEC 60068-2-6 requirements (Vibration: 10 regulations. 

Supply Protection Circuitry Protected against reverse polarity and transient voltages 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave) 

Audible Characteristics Oscillation frequency: 2.9 kHz ± 250 Hz Sound intensity (typical): 79 dB at 1 meter Small yellow LED turns on when audible is activated 

Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. 

Environmental Rating Indicator segments: IP65, IP67, IP68 Audible segments: IP60 UL Type 1 Operating Conditions Temperature: –40 °C to +50 °C (–40 °F to +122 °F) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

**==> picture [147 x 153] intentionally omitted <==**

**----- Start of picture text -----**<br>
Indicator Characteristics<br>1 color<br>Color  Lumen<br>Color Dominant  Coordinates [(1)] Output<br>Wavelength (nm) (Typical at<br>x y 25 °C)<br>Green 535 0.216 0.75 18<br>Yellow 590 0.566 0.423 22<br>Red 620 0.692 0.306 10<br>Blue 470 0.134 0.066 3<br>Connections<br>Indicator segments: Integral 5-pin M12 male/<br>female quick-disconnect connector<br>Audible segments: Integral 5-pin M12 male quick-<br>disconnect connector<br>**----- End of picture text -----**<br>


Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

**==> picture [125 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Required  Supply  Required<br>Wiring  Overcurrent  Wiring  Overcurrent<br>(AWG) Protection (A) (AWG) Protection (A)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 1.0 30 0.5<br>**----- End of picture text -----**<br>


Certifications 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

Turck Banner LTD Blenheim House Blenheim Court Wickford, Essex SS11 8YT GREAT BRITAIN 

(1) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. 

## FCC Part 15 Class B for Unintentional Radiators 

(Part 15.105(b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for help. 

(Part 15.21) Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. 

## Industry Canada ICES-003(B) 

This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. 

Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 2 

07-May-25 

TL15 In-Line Modular Tower Light Indicator Datasheet 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. Audible segment measurements are functionally identical to indicator segment measurements. 

**==> picture [415 x 158] intentionally omitted <==**

**----- Start of picture text -----**<br>
Indicator segments<br>57.8<br>[2.27]<br>27.9<br>[1.1]<br>15.0<br>[0.59]<br>M12 X 1  - 6H<br>M12 X 1  - 6g<br>Audible segments<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

**==> picture [500 x 333] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-pin Single-Ended M12 Female Cordsets<br>Model Length Dimensions (mm) Pinout (Female)<br>BC-M12F5-22-1 1 m (3.28 ft) 44 Typ.<br>BC-M12F5-22-2 2 m (6.56 ft)<br>BC-M12F5-22-5 5 m (16.4 ft)<br>BC-M12F5-22-8 8 m (26.25 ft) M12 x 1 2 1 = Brown<br>ø 14.5 1 2 = White<br>BC-M12F5-22-10 10 m (30.81 ft) 3 3 = Blue<br>5.7 mm dia 4 = Black<br>4 5 5 = Gray<br>BC-M12F5-22-15 15 m (49.2 ft)<br>6.35 mm<br>50.8 mm<br>5-pin Single-Ended M12 Female Right-Angle Cordsets<br>Model Length Dimensions (mm) Pinout (Female)<br>BC-M12F5A-22-1 1 m (3.28 ft) 32 Typ.<br>[1.26"]<br>BC-M12F5A-22-2 2 m (6.56 ft)<br>BC-M12F5A-22-5 5 m (16.4 ft)<br>30 Typ.<br>BC-M12F5A-22-8 8 m (26.25 ft) [1.18"]<br>BC-M12F5A-22-10 10 m (30.81 ft) 2 1 = Brown<br>1 2 = White<br>M12 x 1 3 3 = Blue<br>ø 14.5 [0.57"] 4 = Black<br>4 5 5 = Gray<br>5.7 mm dia<br>BC-M12F5A-22-15 15 m (49.2 ft)<br>6.35 mm<br>50.8 mm<br>**----- End of picture text -----**<br>


© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

07-May-25 

page 3 

TL15 In-Line Modular Tower Light Indicator Datasheet 

**==> picture [500 x 570] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-pin Double-Ended M12 Female to M12 Male Cordsets<br>Model Length Dimensions (mm) Pinouts<br>BC-M12F5-M12M5-22-1 1 m (3.28 ft) Female<br>2<br>BC-M12F5-M12M5-22-2 2 m (6.56 ft) 40 Typ.[1.58"] 1<br>BC-M12F5-M12M5-22-5 5 m (16.4 ft) 3<br>BC-M12F5-M12M5-22-8 8 m (26.25 ft) M12 x 1 4 5 1 = Brown<br>ø 14.5 [0.57"] 2 = White<br>BC-M12F5-M12M5-22-10 10 m (30.81 ft) 3 = Blue<br>44 Typ.[1.73"] Male 4 = Black<br>1 5 = Gray<br>BC-M12F5-M12M5-22-15 15 m (49.2 ft) M12 x 1 2<br>ø 14.5 [0.57"] 4<br>3 5<br>Brackets<br>10<br>LMBM12MAG Ø7.5<br>• Attaches to M12 cordset end<br>• Black polypropylene<br>•• 11.8 kg (26 lb) pull force One piece  19<br>Ø19<br>Ø8<br>LMBM12SP<br>• Attaches to M12 cordset end<br>• Black polypropylene<br>• Supplied with thread-forming hardware  12<br>• Pack of seven<br>Ø10<br>15<br>LMBS15MAG Ø15<br>• Attaches to S15 housing<br>• White polypropylene<br>• 11.8 kg (26 lb) pull force  33<br>• One piece<br>Ø19<br>Ø 4.9<br>LMBS15SP<br>• Attaches to S15 housing  Ø 9.5<br>• White polypropylene  26.2 Ø 15.0<br>• Clearance for M5 or #10 hardware<br>• Pack of five<br>15.0 23.5<br>ACC-CAP M12-10<br>• 10 Caps<br>• Seal and protect exposed, unterminated cascade quick-disconnect connectors<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

07-May-25 

page 4 

TL15 In-Line Modular Tower Light Indicator Datasheet 

DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

07-May-25 

page 5