TGMPL40100A1H

Timing Mode: **RETRIGGERABLE SINGLE SHOT** Category: **TIMER WITH RELAY** Series: **TGMPL** 

## **MISSING PULSE DETECTOR / WATCHDOG** 

## **TGMPL Timers** 

TGMPL series Cube Relay Single Shot timers are a unique combination of digital CMOS timing circuitry with a relay output in a compact 2” x 2” configuration. These units provide the same functional performance as plug-in relay timers, but at significant cost savings. 

## **Timing Mode** 

Input voltage is applied continuously - when control switch closes the relay transfers, if switch closures happen within set time period, relay stays closed. If control switch stays closed or open longer than set time, relay opens. 

|**FEATURES**<br>~~rr~~|**FEATURES**<br>~~rr~~|**FEATURES**<br>~~rr~~|
|---|---|---|
|I **High current-carrying capacity up to 10 amps**|I|**Digital CMOS timing**|
|I **Transient protected**|I|**No minimum  load required**|
|I **100% Load isolation**|I|**Totally encapsulated for protection**|
|||**from harsh environments**|
|I **No leakage in N.O. position**|||
|I **No heat sinking required**|I|**100 % Operational testing before shipping**|
||I||
|I **Available in any time delay period required**|I|**RoHS compliance available**|



170 

**BASIC WIRING AND DIMENSIONS** 

**==> picture [515 x 164] intentionally omitted <==**

**----- Start of picture text -----**<br>
COMMON<br>NORMALLY CLOSED NORMALLY CLOSED<br>55<br>55<br>NO RMALLY OPEN<br>NO RMALLY OPEN 11<br>44 AC HOT<br>MAXMAX DC+ 22 MAXM A X<br>11 SUPPLY VOLTAGE<br>AC HOT 0<br>DC + ) 22<br>SUPPLY VOLTAGE CONTROLCONT AC NEUTRAL 66 CONTROLSWITCHCONTSW<br>— 33 66 SWITCHSW DC MINUS — 33<br>AC NEUTRAL<br>DC MINUS<br>CONTROL SWITCH CONTROL SWITCH<br>(ACTUATES TO GROUND OR AC NEUTRAL) (ACTUATES TO GROUND OR AC NEUTRAL)<br>**----- End of picture text -----**<br>


## **TGMPL** 

## **TGMPLB** 

## **SPECIFICATIONS** 

## **Input Voltage:** 

VDC: 12, 24 or 48 VAC: 24, 48, 120 or 230, 50/60Hz 

## **Time Delay:** 

Timing Mode: Pulse Detector Type: Digital CMOS Time Range: 0.2 second to 24 hours Time Adjustments: Factory-fixed time period; variable, with adjustments on timer, or terminals for external resistor or potentiometer 

**Repeatability:** ±0.5% 

**Setting Accuracy:** Fixed time period: ±10% of nominal time. Variable time range: +15% -5% max. time, -10% min. time 

**Reset/Recycle Time:** 25 milliseconds 

## **Relay Life Expectancy:** 

Mechanical: 20 million operations Electrical: 100,000 operations 

## **Protection:** 

Polarity Protection: All DC units have reverse polarity protection Transient Protection: 18 joules Dielectric Strength: 1800V RMS 60Hz 

## **Temperature Ranges:** 

Storage: -40°C to +85°C Operating: -25°C to +65°C 

## **Physical Data:** 

Mounting: Surface with one #8 screw Connection & Termination: 0.25" quick connects 

**Note:** When using a proximity switch for control unit, a snubber may be required to bypass leakage current 

**Initiate Time:** 6 milliseconds or less 

## **OPTIONS SELECTION** 

**==> picture [484 x 165] intentionally omitted <==**

**----- Start of picture text -----**<br>
Mode of Series Input Examples of  Time Adjustment  Relay Output Options<br>Operation Voltage Time Ranges Method Form<br>VARIABLE TIME PERIODS<br>A Screwdriver Adj.,  1 SPDT H 10 Amps<br>1 120 VAC 0001 0.5 to 1 sec. Variable, integral.<br>2 230 VAC 0010 .1 to 10 sec. C Fixed, internal, 2 SPST<br>3 24 VAC 0100 1 to 100 sec. factory set. (N.O.)<br>Retriggerable TGMPL 4 24-28 VDC 1000 10 to 1000 sec.<br>Single Shot 5 48 VAC Any range up to 24hours available.<br>TGMPLB 6 48 VDC FIXED TIME PERIODS<br>(Watchdog) 7 12 VDC<br>8 Any in between AC Specify time in full seconds or<br>voltage (specify) hours followed by the letter “S”<br>9 Any in between DC or “H” and the decimal amount of<br>voltage (specify) the main time unit.<br>Examples:  5S5 is 5.5 secs<br>5H5 is 5.5 hours<br>Specifications subject to change without notice.<br>**----- End of picture text -----**<br>


2747 Route 20 East, Cazenovia, NY 13035 315-655-8476   I www.airotronics.com