Image not available
Illustrative purposes only
TDR-960-24
AC/DC DIN Rail Power Supply (PSU), ITE, 1 Output, 960 W, 24 VDC, 40 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: MEAN WELL
- Product type:
- No. of Outputs:1 Output; Output Power Max:960W; Output Voltage - Output 1:24V; Output Current - Output 1:40A; Output Voltage - Output 2:-; Output Current - Output 2:-; Output Voltage
- SVHC: No SVHC (25-Jun-2025)
- Product Range: TDR-960 Series
- No. of Outputs: 1 Output
- Output Power Max: 960W
- Current, Output 4: -
- Input Voltage VAC: 340V AC to 550V AC
- Input Voltage AC Max: 550V
- Input Voltage AC Min: 340V
- Power Supply Output Type: Fixed
- Output Current - Output 1: 40A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Voltage - Output 1: 24VDC
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 5 |
| Price | 253.12 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**- TDR 960 series** 960W Three Phase Industrial DIN RAIL with PFC Function ## ■ **==> picture [42 x 5] intentionally omitted <==** **----- Start of picture text -----**<br> User’s Manual<br>**----- End of picture text -----**<br> ## ■ ## **SPECIFICATION** |**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**Note.5**<br>**CURRENT SHARING**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**DC OK REALY CONTACT RATINGS (max.)**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>1000ms, 100ms/400VAC 800ms, 100ms/500VAC at full load<br>12ms / 400VAC 14ms / 500VAC at full load<br>Three-Phase 340 ~ 550VAC (Dual phase operation possible) 480 ~ 780VDC<br>47 ~ 63Hz<br>94%<br>2A/400VAC 1.4A/500VAC<br>56 ~ 65V<br>94.5%<br>COLD START 60A<br><3.5mA / 530VAC<br>29 ~ 33V<br>Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover<br>Protection type : Shut down o/p voltage, re-power on to recover<br>Shut down o/p voltage, recovers automatically after temperature goes down<br>UL508,<br>, EAC TP TC 004 approved, IEC62368-1 CB approved by SIQ; Design refer to BS EN/EN62368-1<br>AS/NZS62368.1<br>Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3,EAC TP TC 020<br>Compliance to<br>EN61000-4-2,3,4,5,6,8,11,<br>EN55024,<br>EN61000-6-2 (<br>EN50082-2),<br>EN61204-3,<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>heavy industry level,EAC TP TC 020<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>Please refer to function manual<br>60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>647.1K hrs min.<br>Telcordia SR-332 (Bellcore) ; 59.5K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>110*125.2*150mm (W*H*D)<br>2.47Kg ; 6pcs/15.8Kg/1.47CUFT<br>**TDR-960-48**<br>48V<br>20A<br>0 ~ 20A<br>960W<br>250mVp-p<br>48 ~ 55V<br>±1.0%<br>±0.5%<br>±1.0%<br>**TDR-960-24**<br>24V<br>40A<br>0 ~ 40A<br>960W<br>180mVp-p<br>24 ~ 28V<br>±1.0%<br>±0.5%<br>±1.0%<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**FUNCTION**<br>**EMC**<br>**(Note 6)**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>℃<br>℃<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>105 ~ 130% rated output power<br>**POWER FACTOR (Typ.)**<br>PF<br>0.88/400VAC PF<br>0.86/500VAC at full load<br>≧<br>≧<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. Dual phase operation is allowed under certain derating to output load.<br>Please refer to derating curves for details.<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives.<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>+ /1000m with fan models for operating altitude higherthan 2000m(6500ft).<br>Product Liability Disclaimer<br>For detailed information, please refer to|**MODEL**<br>**DC VOLTAGE**<br>**RATED CURRENT**<br>**CURRENT RANGE**<br>**RATED POWER**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**SAFETY STANDARDS**<br>**WORKING TEMP.**<br>**Note.5**<br>**CURRENT SHARING**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**DC OK REALY CONTACT RATINGS (max.)**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVERLOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>1000ms, 100ms/400VAC 800ms, 100ms/500VAC at full load<br>12ms / 400VAC 14ms / 500VAC at full load<br>Three-Phase 340 ~ 550VAC (Dual phase operation possible) 480 ~ 780VDC<br>47 ~ 63Hz<br>94%<br>2A/400VAC 1.4A/500VAC<br>56 ~ 65V<br>94.5%<br>COLD START 60A<br><3.5mA / 530VAC<br>29 ~ 33V<br>Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover<br>Protection type : Shut down o/p voltage, re-power on to recover<br>Shut down o/p voltage, recovers automatically after temperature goes down<br>UL508,<br>, EAC TP TC 004 approved, IEC62368-1 CB approved by SIQ; Design refer to BS EN/EN62368-1<br>AS/NZS62368.1<br>Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3,EAC TP TC 020<br>Compliance to<br>EN61000-4-2,3,4,5,6,8,11,<br>EN55024,<br>EN61000-6-2 (<br>EN50082-2),<br>EN61204-3,<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>heavy industry level,EAC TP TC 020<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>Please refer to function manual<br>60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load<br>20 ~ 95% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6<br>647.1K hrs min.<br>Telcordia SR-332 (Bellcore) ; 59.5K hrs min. MIL-HDBK-217F (25<br>)<br>℃<br>110*125.2*150mm (W*H*D)<br>2.47Kg ; 6pcs/15.8Kg/1.47CUFT<br>**TDR-960-48**<br>48V<br>20A<br>0 ~ 20A<br>960W<br>250mVp-p<br>48 ~ 55V<br>±1.0%<br>±0.5%<br>±1.0%<br>**TDR-960-24**<br>24V<br>40A<br>0 ~ 40A<br>960W<br>180mVp-p<br>24 ~ 28V<br>±1.0%<br>±0.5%<br>±1.0%<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC<br>I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**FUNCTION**<br>**EMC**<br>**(Note 6)**<br>**PROTECTION**<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>℃<br>℃<br>℃<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>105 ~ 130% rated output power<br>**POWER FACTOR (Typ.)**<br>PF<br>0.88/400VAC PF<br>0.86/500VAC at full load<br>≧<br>≧<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. Dual phase operation is allowed under certain derating to output load.<br>Please refer to derating curves for details.<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives.<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>+ /1000m with fan models for operating altitude higherthan 2000m(6500ft).<br>Product Liability Disclaimer<br>For detailed information, please refer to|**TDR-960-24**|**TDR-960-48**| |---|---|---|---| ||**DC VOLTAGE**|24V|48V| ||**RATED CURRENT**|40A|20A| ||**CURRENT RANGE**|0 ~ 40A|0 ~ 20A| ||**RATED POWER**|960W|960W| ||**RIPPLE & NOISE (max.) Note.2**|180mVp-p|250mVp-p| ||**VOLTAGE ADJ. RANGE**|24 ~ 28V|48 ~ 55V| ||**VOLTAGE TOLERANCE Note.3**|±1.0%|±1.0%| ||**LINE REGULATION**|±0.5%|±0.5%| ||**LOAD REGULATION**|±1.0%|±1.0%| ||**SETUP, RISE TIME**|1000ms, 100ms/400VAC 800ms, 100ms/500VAC at full load|| ||**HOLD UP TIME (Typ.)**|12ms / 400VAC 14ms / 500VAC at full load|| ||**VOLTAGE RANGE**<br>**Note.4**|Three-Phase 340 ~ 550VAC (Dual phase operation possible) 480 ~ 780VDC|| ||**FREQUENCY RANGE**|47 ~ 63Hz|| ||**POWER FACTOR (Typ.)**|PF<br>0.88/400VAC PF<br>0.86/500VAC at full load<br>≧<br>≧|| ||**EFFICIENCY (Typ.)**|94%|94.5%| ||**AC CURRENT (Typ.)**|2A/400VAC 1.4A/500VAC|| ||**INRUSH CURRENT (Typ.)**|COLD START 60A|| ||**LEAKAGE CURRENT**|<3.5mA / 530VAC|| ||**OVERLOAD**|Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover<br>105 ~ 130% rated output power|| ||**OVER VOLTAGE**|56 ~ 65V<br>29 ~ 33V<br>Protection type : Shut down o/p voltage, re-power on to recover|| ||**OVER TEMPERATURE**|Shut down o/p voltage, recovers automatically after temperature goes down|| ||**DC OK REALY CONTACT RATINGS (max.)**|60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load|| ||**CURRENT SHARING**|Please refer to function manual|| ||**WORKING TEMP.**<br>**Note.5**|-30 ~ +70<br>(Refer to "Derating Curve")<br>℃|| ||**WORKING HUMIDITY**|20 ~ 95% RH non-condensing|| ||**STORAGE TEMP., HUMIDITY**|-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃|| ||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)|| ||**VIBRATION**|Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6|| ||**SAFETY STANDARDS**|UL508,<br>, EAC TP TC 004 approved, IEC62368-1 CB approved by SIQ; Design refer to BS EN/EN62368-1<br>AS/NZS62368.1|| ||**WITHSTAND VOLTAGE**|I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC|| ||**ISOLATION RESISTANCE**|I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃|| ||**EMC EMISSION**|Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3,EAC TP TC 020|| ||**EMC IMMUNITY**|Compliance to<br>EN61000-4-2,3,4,5,6,8,11,<br>EN55024,<br>EN61000-6-2 (<br>EN50082-2),<br>EN61204-3,<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>BS EN/<br>heavy industry level,EAC TP TC 020|| ||**MTBF**|647.1K hrs min.<br>Telcordia SR-332 (Bellcore) ; 59.5K hrs min. MIL-HDBK-217F (25<br>)<br>℃|| ||**DIMENSION**|110*125.2*150mm (W*H*D)|| ||**PACKING**<br>2.47Kg ; 6pcs/15.8Kg/1.47CUFT<br>℃<br>℃<br>℃<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>: includes set up tolerance, line regulation and load regulation.<br>4. Dual phase operation is allowed under certain derating to output load.<br>Please refer to derating curves for details.<br>5. Installation clearances<br>: 40mm on top, 20mm on the bottom, 5mm on the left and right side are recommended when loaded permanently with full power.<br>In case the adjacent device is a heat source, 15mm clearance is recommended.<br>6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets<br>EMC directives.<br>7. The ambient temperature derating of 3.5<br>/1000m with fanless models and of 5<br>+ /1000m with fan models for operating altitude higherthan 2000m(6500ft).<br>Product Liability Disclaimer<br>For detailed information, please refer to||| 7. The ambient temperature derating of 3.5 ℃ /1000m with fanless models and of 5 ℃ + /1000m with fan models for operating altitude higher than 2000m(6500ft). ※ Product Liability Disclaimer ： For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx _File Name:TDR-960-SPEC 2022-02-21_ **- TDR 960 series** ## 960W Three Phase Industrial DIN RAIL with PFC Function **==> picture [498 x 567] intentionally omitted <==** **----- Start of picture text -----**<br> Mechanical Specification Case No.214A Unit:mm<br>1234<br>125.2<br>CN205<br>1234<br>1<br>2<br>3<br>TB1 45<br>1 6<br>2 TB2<br>3<br>4<br>ADMISSIBLE DIN-RAIL:TS35/7.5 OR TS35/15<br>Terminal Pin No. Assignment (TB1) Terminal Pin No. Assignment (TB2) Control Pin (CN205) : DINKLE ECH250R-04P or equivalent<br>Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Wire Diameter<br>12 AC/L3FG 4,5,61,2,3 DC OUTPUT +VDC OUTPUT -V 12 P-(Current Share)P+(Current Share) DINKLE ESC250V-04Por equivalent 0.081~0.517mm2<br>(Including in the (28~20AWG)<br>3 AC/L2 3,4 DC OK Relay Contact single package)<br>4 AC/L1<br>Block Diagram PFC fosc : 65KHz<br>PWM fosc : 60KHz<br>DC OK<br>EMI FILTER PFC POWER RECTIFIERS +V<br>I/P & CIRCUIT SWITCHING & -V<br>RECTIFIERS FILTER<br>O.C.P.<br>O.L.P.<br>DETECTION<br>FG<br>PWM CIRCUIT<br>PFC CONTROL<br>CONTROL CURRENT SHARE CURRENT<br>SHARE<br>O.T.P.<br>O.V.P.<br>DC OK +V ADJ<br>150<br>+<br>110<br>35<br>**----- End of picture text -----**<br> ## **DC OK Relay Contact** Contact Close PSU turns on / DC OK. Contact Open PSU turns off / DC Fail. Contact Ratings (max.) 30V/1A resistive load. _File Name:TDR-960-SPEC 2022-02-21_ **- TDR 960 series** 960W Three Phase Industrial DIN RAIL with PFC Function **==> picture [449 x 178] intentionally omitted <==** **----- Start of picture text -----**<br> Derating Curve Output derating VS input voltage<br>100<br>100 Three phase operation<br>90<br>80<br>80<br>60 70 Dual phase operation(L1 & L3)<br>60<br>40 Dual phase operation(L1 & L2 or L2 & L3)<br>50<br>20<br>40<br>-30 0 10 20 30 40 50 60 70 (VERTICAL) 340 360 380 400 450 500 550<br>AMBIENT TEMPERATURE ( ℃ ) INPUT VOLTAGE (V) 60Hz<br>LOAD (%) LOAD (%)<br>**----- End of picture text -----**<br> ## **Function Manual** ## 1. Current sharing - (1) Parallel operation is available by connecting the units shown as below (P+,P- are connected mutually in parallel). - (2) Difference of output voltages among parallel units should be less than 0.2V. - (3) The total output current must not exceed the value determined by the following equation (Output current at parallel operation)=(The rated current per unit) x (Number of unit) x 0.9. - (4) In parallel operation 4 units is the maximum, please consult the manufacture for other applications. - (5) The power supplies should be paralleled using short and large diameter wiring and then connected to the load. - (6) When in parallel operation, the minimum output load should be greater than 5% of total output load. - (Min. load >5% rated current per unit x number of unit) - (7) In parallel connection, maybe only one unit (master) operate if the total output load is less than 5% of rated load condition. The other PSUs (slaves) may go into standby mode and their output LEDs & relays will not turn on. - (8) Some minor noise may be heard at light load condition under parallel operation. - This is a normal phenomenon and the performance of the PSU will not be influenced. **==> picture [478 x 200] intentionally omitted <==** **----- Start of picture text -----**<br> LOAD<br>+V -V<br>P+ and P- lines<br>should be twisted in pairs<br>P+(pin2)<br>DC OK 4 DC OK 4 DC OK 4 P-(pin1) DC OK 4<br>DC OK 3 DC OK 3 DC OK 3 DC OK 3<br>P+ 2 P+ 2 P+ 2 P+ 2<br>P- 1 P- 1 P- 1 P- 1<br>CN205 CN205 CN205 CN205<br>+V -V +V -V +V -V +V -V<br>TB2 TB2 TB2 TB2<br>PSU PSU PSU PSU<br>**----- End of picture text -----**<br> _File Name:TDR-960-SPEC 2022-02-21_
Updated at June 4, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →