TCOB0J107M8R-ES2

## **TCO Series** 

## **Conductive Polymer Chip Capacitors (Standard)** 

## **FEATURES** 

- Ta-polymer technology 

- High ripple capability 

- High CV 

**==> picture [351 x 25] intentionally omitted <==**

**----- Start of picture text -----**<br>
LEAD-FREE COMPATIBLE LEAD-FREE<br>• Surge robust COMPONENT<br>• J-lead LF<br>**----- End of picture text -----**<br>


## **APPLICATIONS** 

- DC/DC 

- Industrial 

- Computers 

- Telecom 

- IoT 

- Home applications 

## **MARKING** 

## **CASE DIMENSIONS:** 

## **millimeters (inches)** 

|**Code**|**EIA**<br>**Code**|**EIA**<br>**Metric**|**L±0.20**<br>**(0.008)**|**W±0.20**<br>**(0.008)**|**H±0.20**<br>**(0.008)**|**W1±0.20**<br>**(0.008)**|**A±0.30**<br>**(0.012)**|
|---|---|---|---|---|---|---|---|
|B|1210|3528-21|3.50 (0.138)|2.80 (0.110)|1.90 (0.075)|1.90 (0.075)|0.80 (0.031)|



**HOW TO ORDER TCO B 1A 336 M 8R** □□□ ~~ToT~~ **Type Case Size Rated DC Voltage** TT **Capacitance Code** To **Tolerance** qT **Packaging** qT **Discrimination code** oT See table 0E = 2.5Vdc pF code: 1st two digits M = ±20% 8 = Tape width above 0J = 6.3Vdc represent significant figures, R = Positive electrode 1A = 10Vdc 3rd digit represents multiplier on the side opposite to 1C=16Vdc (number of zeros to follow) sprocket hole 1E=25Vdc 

## **TECHNICAL SPECIFICATIONS** 

|Technical Data:|All technical data relate to an ambient temperature of +25ºC|
|---|---|
|Capacitance Range:|15µF to 330µF|
|Capacitance Tolerance:|±20%|
|Leakage Current DCL:|Please see the ratings andpart number reference table below|
|Temperature Range:|-55ºC to +105°C|



Note: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. 

Please reference the KYOCERA AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance 

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 

– polymer, tantalum and niobium oxide capacitors – 

6 

TDS-PTNO-0043 | Rev 3 

## **TCO Series** 

## **Conductive Polymer Chip Capacitors (Standard)** 

**==> picture [126 x 48] intentionally omitted <==**

## **CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE)** 

**==> picture [314 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
Capacitance Rated Voltage DC (VR) @ 105°C Cap<br>μF Code 2.5V(e) 6.3V(j) 10V(A) 16V(C) 25V(E) Code<br>15 156 100 e<br>22 226 90 j<br>33 336 150 100 n<br>47 476 150 150 s<br>100 107 35,45,150 ā<br>150 157 35,45,150 ē<br>220 227 35 35 j<br>330 337 35,45 n<br>**----- End of picture text -----**<br>


Released ratings, (ESR ratings in mOhms) 

Note: Voltage ratings are minimum values. KYOCERA AVX reserves the right to supply higher volage ratings in the same case size, to the same reliability standards. 

## **RATINGS & PART NUMBER REFERENCE** 

**==> picture [501 x 305] intentionally omitted <==**

**----- Start of picture text -----**<br>
100kHz<br>Maximum<br>Rated  DCL DF ESR Max.  RMS<br>Part No. Case Size Capacitance  Voltage Operating  Max. Max. @100kHz  Current  MSL<br>(µF) Temp.<br>(V) (µA) (%) (mΩ) (mA)<br>(°C) 45°C<br>2.5 Volt<br>TCOB0E227M8R-EN1 B 220 2.5 105 55.0 8 35 1900 3<br>TCOB0E227M8R-EN2 B 220 2.5 105 55.0 8 35 1900 3<br>TCOB0E337M8R-EN1 B 330 2.5 105 82.5 15 35 1900 3<br>TCOB0E337M8R-EN2 B 330 2.5 105 82.5 15 35 1900 3<br>TCOB0E337M8R-ES1 B 330 2.5 105 82.5 15 45 1700 3<br>TCOB0E337M8R-ES2 B 330 2.5 105 82.5 15 45 1700 3<br>6.3 Volt<br>TCOB0J476M8R B 47 6.3 105 30.0 8 150 900 3<br>TCOB0J107M8R-EN1 B 100 6.3 105 63.0 8 35 1900 3<br>TCOB0J107M8R-EN2 B 100 6.3 105 63.0 8 35 1900 3<br>TCOB0J107M8R-ES1 B 100 6.3 105 63.0 8 45 1700 3<br>TCOB0J107M8R-ES2 B 100 6.3 105 63.0 8 45 1700 3<br>TCOB0J107M8R B 100 6.3 105 63.0 8 150 900 3<br>TCOB0J157M8R-EN1 B 150 6.3 105 94.5 15 35 1900 3<br>TCOB0J157M8R-EN2 B 150 6.3 105 94.5 15 35 1900 3<br>TCOB0J157M8R-ES1 B 150 6.3 105 94.5 15 45 1700 3<br>TCOB0J157M8R-ES2 B 150 6.3 105 94.5 15 45 1700 3<br>TCOB0J157M8R B 150 6.3 105 94.5 15 150 900 3<br>TCOB0J227M8R-EN1 B 220 6.3 105 139.0 15 35 1900 3<br>TCOB0J227M8R-EN2 B 220 6.3 105 139.0 15 35 1900 3<br>10 Volt<br>TCOB1A336M8R B 33 10 105 33.0 8 150 900 3<br>TCOB1A476M8R B 47 10 105 47.0 8 150 900 3<br>16 Volt<br>TCOB1C336M8R B 33 16 105 159.0 10 100 1100 3<br>25 Volt<br>TCOB1E156M8R B 15 25 105 113.0 10 100 1100 3<br>TCOB1E156M8R-HB1 B 15 25 105 113.0 10 100 1100 3<br>TCOB1E226M8R-EB1 B 22 25 105 55.0 10 90 1200 3<br>**----- End of picture text -----**<br>


Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. 

Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 1.5 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. 

**NOTE: KYOCERA AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards.** 

– polymer, tantalum and niobium oxide capacitors – 

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 

7 

TDS-PTNO-0043 | Rev 3 

## **TCO Series** 

## **Conductive Polymer Chip Capacitors (Standard)** 

## **QUALIFICATION TABLE** 

|**TEST**|**TCO series(Temperature range -55ºC to +105ºC)**|**TCO series(Temperature range -55ºC to +105ºC)**|**TCO series(Temperature range -55ºC to +105ºC)**|**TCO series(Temperature range -55ºC to +105ºC)**|**TCO series(Temperature range -55ºC to +105ºC)**|**TCO series(Temperature range -55ºC to +105ºC)**|
|---|---|---|---|---|---|---|
||**Condition**|||**Characteristics**|||
|**Endurance**|Apply rated voltage (Ur) at 105°C for 1000hrs<br>through a serial resistence of ≤3.0Ω. Stabilize at<br>room temperature for 24 hours before measuring.|||Visual examination|no visible damage||
|||||DCL|2x initial limit||
|||||ΔC/C|within ±20% of initial value||
|||||DF|1.5x initial limit||
|**Humidity**<br>~~a~~|Store at 60±2°C, 90-95% relative humidity for 500+<br>12/0 hours. Stabilize at room temperature and<br>humidity for 24 hours before measuring.<br>~~a~~<br>~~ee~~|||Visual examination|no visible damage||
|||||DCL|1.5x initial limit||
|||||ΔC/C|within +30/-20% of initial value||
|||||DF|1.5x initial limit||
|**Temperature**<br>**Stability**<br>~~a~~|Step<br>~~a~~<br>~~a~~|Temperature°C<br>~~ee~~<br>~~ee~~|Duration(min)<br>~~ee~~|~~ee~~|-55°C|+105°C|
||1<br>~~a~~<br>~~a~~<br>~~en~~|-55<br>~~ee~~<br>~~ee~~<br>~~en~~|15<br>~~ee~~|DCL<br>~~ee~~|n/a|10xIL*|
||2<br>~~a~~<br>~~en~~|+105<br>~~ee~~<br>~~en~~|15<br>~~ee~~||||
||~~en~~|||ΔC/C|0/-20%|+80/0%|
|||||DF|IL*|IL*|
|**Surge Voltage**<br>~~Pf~~|Apply 1.3x rated voltage (Ur) at 85±2°C for<br>1000 cycles, 300sec charge and 30sec discharge<br>resistance 1000Ω.<br>~~Pf~~|||Visual examination|no visible damage||
|||||DCL|initial limit||
|||||ΔC/C|±20% of initial limit||
|||||DF|initial limit||
|**Vibration**|4.17 JIS C 5101-1<br>Frequency: 10 to 55 to 10Hz/min.<br>Amplitude: 1.5mm<br>Time: 2hours each in X and Y directions|||Visual examination|no visible damage||
|||||DCL|initial limit||
|||||ΔC/C|within ± 5% of initial value||
|||||DF|initial limit||



*Initial Limit 

For use outside of recommended conditions and special request, please contact KYOCERA AVX. Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. 

## **PACKAGING SPECIFICATIONS** 

## Unit (mm) 

|**Case**|**A±0.10**|**B±0.10**|**W±0.20**|**E±0.10**|**F±0.05**|**P1±0.10**|**P2±0.05**|**PO±0.10**|**DO+0.10/0**|**t1±0.05**|**t2±0.10**|**Standard**<br>**packaging**<br>**quantity**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|B|3.30|3.80|8.00|1.75|3.50|4.00|2.00|4.00|φ1.50|0.25|2.20|2,000 pcs|



Polarity of parts: as indicated in the drawing below, the anodes (+) are at the right with respect to the direction of the tape pull out (on the opposite side to the feeding holes). 

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 

– polymer, tantalum and niobium oxide capacitors – 

8 

TDS-PTNO-0043 | Rev 3 

## **TCO Series** 

## **Conductive Polymer Chip Capacitors (Standard)** 

## **REEL DIMENSIONS** 

– polymer, tantalum and niobium oxide capacitors – 

The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 

9 

TDS-PTNO-0043 | Rev 3