TC4810-04

## **ANALOGUE TEMPERATURE CONTROLLERS** 

## **SPECIFICATION** 

## **TOS ON/OFF & PROPORTIONAL CONTROLLER** 

110/230(220-240)Vac @ 50/60 Hz or 24Vac/dc 4VA max. 

Supply voltage: Power drain: Scale accuracy: Scale range: Input sensor: Max ext. resist: Control band: 

The TOS range of temperature controllers offer an extremely cost effective analogue solution for simple on/off or proportional control. Options for J/K thermocouples and PT100 RTDs are available with either relay or SSR drive outputs. 

+/- 2% of full scale 

Scale range: See part number below Input sensor: J, K, R or T thermocouple, 3-wire PT100 or 4-20mA Max ext. resist: T/couple: 100 , PT100: 5 per wire Control band: On/Off: Hyst. = 0.5% (1% TC486*) of full scale Propl: PB = 4% to 10% of full scale Cycle time: 20 secs (PD model only) Output rating: Relay: SPCO, 5A/240Vac resistive SSR: 30mA/24Vdc Electrical life: 100,000 ops at rated load Deviation output: +/- 50 Amps Ambient range: -10 to 50 C non-condensingo Approvals: Conforms to CE emc EN50081-1 & EN50082-1 and low voltage EN61010-1 directives Weight: 200gms 

Selectable on/off or proportional action Up to 1200 C scale rangeso J, K T/couple or PT100 input options Relay or SSR drive output options 

## **SPECIFICATION** 

Supply voltage: 90 to 264Vac/dc @ 50/60 Hz low voltage EN61010-1 directives Power drain: 3VA max. Weight: 200gms Scale accuracy: +/- 2% of FSD Scale range: See standard items below **Part Numbering Options : TC48 A B - C D -110/230VAC** Input sensor: J or K thermocouple or PT100 - 3 wire Max ext. resist: T/couple: 100 , PT100: 5 per wire Control band: On/Off: Hysteresis = 0.5 +/- 0.2% of scale range A Control On/off 1 D Scale J, K 0 to 200ºC 1 Propl: Proportional band = 3% of scale range PD 3 J, K 0 to 400ºC 2 Output rating: Relay: 3A/240Vac resistive Latch 5 K 0 to 600ºC 3 SSR: 20mA/12Vdc On/off 4-20mA 6 K 0 to 800ºC 4 Electrical life:Ambient range: 100,000 ops at rated load-10 to 50 C non-condensingo B OutputAction/ Dir/relayRev/relay 01 KT -100 to 200ºC0 to 1200º 50 Weight: 180gms Rev/SSR 2 T -170 to 30ºC 6 Dir/SSR 3 R 0 to 1600ºC 0 **CONNECTION DIAGRAM** - + C Sensor K t/couple 0 PT100 -100 to 200ºC 0 J t/couple 1 PT100 -50 to 150ºC 1 Thermocouple 4 SSR drive option T t/couple 2 PT100 0 to 100ºC 2 input 2 5 R t/couple 3 PT100 0 to 200ºC 3 - 3 6 4-20 mAPT100 3 wire 56 PT1004-20mA-50 to 100ºC0 to 100% 46 2 N For other temperature ranges, please contact our sales office. + 1 1 8 7 **CONNECTION DIAGRAM** PT100 Thermocouple input PT100 input input L + **DIMENSIONS** 24V 0V 15 64 13 + 6 7 ~~Be~~ 5 8 - 5 6 7 cut-out45 x 45Panel **-0+0.5** 110VacN - 43 2 1 11 109 +SSR orRelay sensor4-20mA input **-** 4-20mA 230Vac(or 24Vac) 5 6 7 **+ STANDARD ITEMS DIMENSIONS** ~~4~~ **Input Output Range Part Number** 15 S 74 ~~F~~ 17 2. 48 x 48 J T/c Relay 0 to 100 Co TOS-B4RJ1C 0 to 200 Co TOS-B4RJ2C K T/c Relay 0 to 200 Co TOS-B4RK2C 0 to 400 Co TOS-B4RK4C 0 to 800 Co TOS-B4RK8C PT100 Relay 0 to 100 Co TOS-B4RP1C eee ~~—— ac~~ For suitable panel mounting or DIN-rail wiring sockets see page 33. Forthermocouples and PT100 probes see page 26. Panel cut-out 45 x 45 **+0-0.5 STANDARD ITEMS TC4800 ON/OFF & PD TEMPERATURE CONTROLLER Input Mode Output Range Part Number** The TC4800 range of temperature o controllers is available in on/off or K T/cK T/c On/OffOn/Off RelayRelay 0 to 200 C0 to 400 Co TC4810-01-110/230VACTC4810-02-110/230VAC proportional + derivative (PD) control K T/c On/Off Relay 0 to 800 Co TC4810-04-110/230VAC options, operating from a range ofsensors.enables them to be used for thecontrol of processes other thantemperature. Of particular note is thedial lock which can be used to preventtampering.A 4 - 20mA input type also K T/cJ T/cPT100PT100PT100K T/cK T/c On/OffOn/OffOn/OffOn/OffOn/OffPDPD RelayRelayRelayRelayRelayRelayRelay -50 to 150 C0 to 100 C0 to 200 C0 to 1200 C0 to 200 C0 to 200 C0 to 400 Coooooo o TC4810-51-110/230VACTC4810-52-110/230VACTC4810-53-110/230VACTC4810-05-110/230VACTC4810-11-110/230VACTC4830-01-110/230VACTC4830-02-110/230VAC K T/c PD Relay 0 to 600 Co TC4830-03-110/230VAC Dial lock J, K T/c, PT100 or 4 - 20mA inputs —_ On/off or PD control action Deviation LEDs plus meter output For suitable panel mounting or DIN-rail wiring sockets see page 33. For Dual 110/230Vac supply input Relay or SSR drive output options thermocouples and PT100 sensors see page 26. **13** 

**ANALOGUE PROCESS CONTROLLERS** 

**==> picture [128 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
TR4800 TACHOMETER RELAY<br>[<br>**----- End of picture text -----**<br>


**==> picture [14 x 20] intentionally omitted <==**

**----- Start of picture text -----**<br>
[<br>**----- End of picture text -----**<br>


## **FSRS SHAFT ROTATION SENSOR** 

The TR4800 series tachometer relay will switch it's output at the speed selected on the front dial. The units are designed to match the styling of the TC4800 temperature controllers and TT4800 Timers. They offer a fast reaction time of <0.4sec at 150rpm, have an internal supply to power active sensors and a meter output to display the measured speed. The range consists of three models covering speeds from 5 to 10,000 rpm. 

The FSRS shaft rotation sensor is specifically designed to prevent access to a normally rotating machine until it has slowed to a safe speed. An adjustable potentiometer on the facia enables the sensor to be set for an appropriate minimum speed which may be considered as safe for the operator to gain access. If the sensor does not ae receive a pulse within the time set by the potentiometer, it's output will energise and this signal can be used to disable a guard. By using the normally closed contacts the sensor becomes fail-safe in the event of loss of power 

3 models for 5 to 10,000 rpm High speed response to input 1mA meter output to display rpm Internal 15Vdc sensor supply 

**==> picture [543 x 593] intentionally omitted <==**

**----- Start of picture text -----**<br>
SPECIFICATION<br>SPECIFICATION<br>Supply voltage : 110/230(220-240)Vac @ 50/60 Hz<br>Supply voltage: 110/230(220-240)Vac @ 50/60 Hz or 24Vac/dc Power drain : 4VA<br>Power drain: 3VA or 2 Watts max. Time delay : 1 to 30 seconds<br>Scale accuracy: +/- 2% of full scale Sensing speed : Calculated by Smin = 60/nT rpm<br>Sensing ranges: 01: 5 to 100 rpm where n = No. of pulses per revolution<br>02: 50 to 1000 rpm T = time set on potentiometer<br>03: 500 to 10000 rpm Min. Pulse width: 3 msecs (for 50% duty cycle). To calculate the minimum<br>Input sensor: Any volt-free contact or 3-wire active sensor with a 'flag' width (W) use the formula Wf f = r/10 mm<br>power consumption of < 25mA at 15Vdc. See SI and (50% duty) where r = radius of shaft<br>SC range of sensors on pages 29 and 30. Input sensor: Any volt-free contact (no bounce) or 3-wire active<br>Output rating: SPCO relay rated at 5A/240Vac/30Vdc resistive Sensor with a power consumption of < 25mA at 24Vdc.<br>Electrical life: 100,000 ops at rated load See SI or SC series sensors on pages 29 - 30.<br>Metering output:Ambient range:Ambient range: 1 mAmp fsd at 75-10 to 60 C non-condensingo-10 to 60 C non-condensingo Output rating:Electrical life: SPCO relay rated at 5A/240Vac/30Vdc resistive100,000 ops at rated load<br>Approvals: Conforms to CE emc EN50081-1 & EN50082-1 and Ambient range: 10 to 50 C non-condensingo<br>low voltage EN61010-1 directives Approvals: Conform to CE emc EN50081-1 & EN50082-1 and<br>low voltage EN61010-1 directives<br>Part Numbering Options : TR4801 - A - B<br>CONNECTION DIAGRAM<br>+24V<br>A Range 5 - 100 rpm 01 NPN<br>50 - 1000 rpm 02 Sensor<br>500 - 10000 rpm 03 -<br>[ep 6 7<br>B Power 110/230Vac 110/230VAC 5 8<br>supply 24Vac/dc 24VAC/DC 4 9<br>230V/24Vac 3 10<br>2 11<br>1<br>CONNECTION DIAGRAM<br>N<br>+15V 110Vac<br>NPN<br>Sensor DIMENSIONS 19 99 13<br>- 6 7<br>5 a 8 14 S 16 18 y<br>12 20<br>4 9 10 22 ——-<br>230V/24V 3 10 86 2624<br>2 1 11 4 2 1 30 28<br>110V N Panel Cut-out 45 x 45 mm -0+0.5<br>STANDARD ITEM<br>DIMENSIONS<br>Type Delay Part Number<br>15 74 17 48 sq<br>Shaft Rotation Sensor 30 sec FSRST30SLP-110/230VAC<br>Note: For suitable panel mounting or DIN rail wiring sockets see page 33.<br>—— — Fo<br>FLST LIQUID LEVEL DETECTOR<br>The FLST liquid level detector has a<br>fixed sensitivity, designed primarily to<br>sense water using a conductive differ-<br>Panel Cut-out 45 x 45 mm -0+0.5 ential sensing device. By shorting the<br>high and low probes, however, it can<br>STANDARD ITEMS also be used for single point detection.<br>Under differential operation, the output<br>Type Range Part Number relay will energise when the liquid falls<br>below the 'Low' level and de-energise<br>Tachometer relay 5 -100 rpm TR4801-01-110/230VAC when it rises above the 'High' level.<br>4 Tachometer relay b 50 -1000 rpm TR4801-02-110/230VAC =<br>Tachometer relay 500 -10000 rpm TR4801-03-110/230VAC<br>48 sq<br>+<br>-<br>+<br>-<br>**----- End of picture text -----**<br>


## **SPECIFICATION** 

Supply voltage: 110/230(220-240)Vac @ 50/60 Hz or 24Vac/dc Power drain: 3VA or 2 Watts max. Scale accuracy: +/- 2% of full scale Sensing ranges: 01: 5 to 100 rpm 02: 50 to 1000 rpm 03: 500 to 10000 rpm Input sensor: Any volt-free contact or 3-wire active sensor with a power consumption of < 25mA at 15Vdc. See SI and SC range of sensors on pages 29 and 30. Output rating: SPCO relay rated at 5A/240Vac/30Vdc resistive Electrical life: 100,000 ops at rated load o Metering output:Ambient range:Ambient range: 1 mAmp fsd at 75-10 to 60 C non-condensingo-10 to 60 C non-condensingo Approvals: Conforms to CE emc EN50081-1 & EN50082-1 and low voltage EN61010-1 directives 

Differential or single point sensing Level indicating LEDs Dual supply voltage 

Note: For suitable panel mounting or DIN rail wiring sockets see page 33. 

**14** 

## **ANALOGUE PROCESS CONTROLS** 

**SPECIFICATION DIMENSIONS** 19 74 13 Supply voltage: 110/230(220-240)Vac @ 50/60 Hz Power drain: 4VA Operatingres: 950K on, 220K ff 14 16 18 Sensing delay: 500 msec typical 12 20 Output rating:Electrical life:Ambient range:Approvals: 100,000 ops at rated loadConforms to CE emc EN50081-1 & EN50082-1SPCO relay rated at 5A/240Vac/30Vdc resistive-10 to 60 C non-condensingo 86104 2 1 30 28222624 and low voltage EN61010-1 directives oa ~~|~~ Weight: 180gms Panel Cut-out 45 x 45 mm[-0] +0.5 **CONNECTION DIAGRAM STANDARD ITEM** High Low **Type Part Number** Common Differential Level sensor FLDT-110/230VAC 

**CONNECTION DIAGRAM STANDARD ITEM** High Low **Type Part Number** Common 6 7 Differential Level sensor FLDT-110/230VAC 5 8 4 Note: For suitable panel mounting or DIN rail sockets see page 33. 3 10 **T3S ON/OFF & PROPORTIONAL TEMPERATURE CONTROLLER** N 2 11 1 110Vac The T3S range of temperature controllers 230Vac ~~er~~ offer easy to set, non programmable **DIMENSIONS** 4 99 13 digital on/off or proportional control. Options are available for J/K thermocouples and PT100 RTDs inputs with either relay or SSR drive outputs. LEVEL CONTROLLER Selectable on/off or proportional action Upto 800 C scale rangesoo J, K T/couple or PT100 input options OP IN1 IN2 ~ Relay or SSR drive output options **SPECIFICATION** ~~co~~ ) **STANDARD ITEM** Panel Cut-out 45 x 45 mm -0+0.5 Supply voltage:Power drain: 90 to 264Vac/dc @ 50/60 Hz5VA max. Scale accuracy: +/- 1% of FSD **Type Part Number** Scale ranges: PT100: 99.9, 199, 399 Co J T/c: 199, 399 Co Differential Level sensor FLST-110/230VAC o K T/c: 399, 799 C | Note: For suitable panel mounting or DIN rail sockets see page 33. Max ext. resist: T/couple: 100 , PT100: 5 per wire Control band: On/Off: Hysteresis = 0.2 to 0.5% of scale range Propl: Propl. band = up to 3% of scale range **FLDT LIQUID LEVEL DETECTOR** Reset adjust: +/-3% of scale range The FLDT liquid level detector is designOutput rating: Relay: 2A/240Vac resistive ed to operate with a differential sensing SSR: 20mA/12Vdc device but by shorting the high and low Electrical life:Ambient range:Ambient range: -10 to 50 C non condensing100,000 ops at rated loado 

**T3S ON/OFF & PROPORTIONAL TEMPERATURE CONTROLLER** The T3S range of temperature controllers ~~er~~ offer easy to set, non programmable digital on/off or proportional control. Options are available for J/K thermocouples and PT100 RTDs inputs with either relay or SSR drive outputs. Selectable on/off or proportional action Upto 800 C scale rangesoo J, K T/couple or PT100 input options Relay or SSR drive output options ) 

**==> picture [490 x 365] intentionally omitted <==**

**----- Start of picture text -----**<br>
The FLDT liquid level detector is design-<br>ed to operate with a differential sensing SSR: 20mA/12Vdc<br>device but by shorting the high and low 100,000 ops at rated loadoo<br>probes it can also be used for single Electrical life:Ambient range:Ambient range: -10 to 50 C non condensing100,000 ops at rated loado<br>point detection. A sensitivity control on<br>the front of the unit enables it to be usedfor a wide range of conductive liquids. CONNECTION DIAGRAM - +<br>Under differential operation, the output SSR drive option<br>relay will energise when the liquid falls 4<br>5<br>below the 'Low' level and de-energise 3<br>‘<br>when it rises above the 'High' level.<br>Thermocoupleinput 2 6 N<br>Adjustable sensitivity control - 7<br>1<br>PT100 8<br>input<br>110/230(220-240)Vac @ 50/60 Hz +<br>L<br>4VA<br>12 73 15<br>2K ON, 5K OFF to 20K ON, 59K OFF DIMENSIONS<br>500 msec typical<br>SPCO relay rated at 5A/240Vac/30Vdc resistive<br>100,000 ops at rated load<br>-10 to 60 C non-condensingoo<br>Conforms to CE emc EN50081-1 & EN50082-1 =<br>and low voltage EN61010-1 directives<br>200gms<br>8 4 6<br>Low i :<br>High Panel cut-out 45 x 45 [-0] +0.5<br>STANDARD ITEMS<br>Common<br>_ 6 7 Input Output Range Part Number<br>5 8<br>4 J T/c Relay 0 to 199 Co T3S-B4RJ2C<br>J T/c Relay 0 to 399 Co T3S-B4RJ4C<br>3 10 K T/c Relay 0 to 399 Co T3S-B4RK4C<br>2 11 N K T/c Relay 0 to 799 Co T3S-B4RK8C<br>1 110Vac a<br>230Vac For suitable panel mounting or DIN rail wiring sockets see page 33.<br>48 sq<br>**----- End of picture text -----**<br>


Differential or single point sensing Adjustable sensitivity control Dual supply voltage 

## **SPECIFICATION** 

Supply voltage: 110/230(220-240)Vac @ 50/60 Hz + Power drain: 4VA Operating resistance range: 2K ON, 5K OFF to 20K ON, 59K OFF **DIMENSIONS** Sensing delay: 500 msec typical Output rating: SPCO relay rated at 5A/240Vac/30Vdc resistive Electrical life: 100,000 ops at rated load Ambient range: -10 to 60 C non-condensingoo Approvals: Conforms to CE emc EN50081-1 & EN50082-1 = and low voltage EN61010-1 directives Weight: 200gms 

**CONNECTION DIAGRAM** 

**15** 

**DIGITAL TEMPERATURE CONTROLLERS** 

**DTC410 ON/OFF TEMPERATURE CONTROLLER** ~~Po~~ 

## **PJ32 ON/OFF REFRIGERATION CONTROLLER** ~~Po~~ 

These controllers are designed specifically for normal and low temperature refrigeration units with static or ventilated evaporators. The front panel comes in a range of colours or can be custom designed. Versions are available with 1, 2 and 3 relay outputs, 1 and 2 NTC, 1 PTC and an optional digital input. The PJ32 can be powered from either 12Vac/dc or 230Vac supplies. 

The DTC410 range of on/off temperature controllers are designed to offer the programmable functionality of modern PID controllers but at a price suited to on/off applications. The clear LCD display and 2-button programming gives an easy to use set-up procedure. Message displays also provide a clear indication of alarms or error status. For the matching UDT timer see page 8. 

NTC or PTC input options Custom front panels available 12Vac/dc or 230Vac power supply Up to 3 relay outputs Front panel mounting system Serial connection/HACCP option Fast set up using programme key 

4 programmable thermocouple inputs PT100 & 4-20mA inputs 10 programmable alarm options Direct or reverse action Programmable set-point limits 

## **SPECIFICATION** 

## **SPECIFICATION** 

Supply voltage: 24Vac/dc @ 60mA max. 110Vac, 50/60 Hz @ 1.5VA max. 220-240Vac, 50/60 Hz @ 1.5VA max. Sensor options: J, K, T, N T/couples, PT100 and 4-20mA Scale ranges: J T/c = -99 to 700 C (999 F)o o T T/c = -99 to 300 C (570 F)o o K/N T/c = -99 to 999 C or Fo PT100 = -99 to 400 C (700 F)o o 4-20mA = scalable -99 to 999 units Gain accuracy: T/c = +/- 0.25% of scale range Others = +/- 0.6% of scale range Offset accuracy: T/c = +/- 5 C, PT100 = +/- 2 Co o Outputs: Control: 3A @ 240Vac, SPCO relay Alarm: 0.5A @ 120Vac, SPNO relay Approvals: Conforms to CE generic standards EN50081-1 and EN50082-1 for emc and EN61010-1 for low voltage Ambient range: -10 to 50 C non-condensingo Memory back-up: Lithium battery with 10 years operating life Weight: 205gms 

Supply voltage : 12Vac/dc or 230Vac Power drain : 3VA Sensor options : NTC or PTC Scale range : -50 to 90ºC Accuracy : NTC +/-1ºC PTC +/-3ºC Outputs : S0E : 8A SPST relay S0P/S1P : 16A SPST relay S2,X,Y : 1 SPCO and 1SPST 8A relays C : 2 SPST 5A and 1 SPST 8A relays Approvals: Conforms to CE generic standards EN50081-1 and EN50082-1 for emc and EN61010-1 for low voltage Ambient range: -10 to 50 C <80% rH non-condensingo Weight: 150gms 

## **Part Numbering Options : PJ32 A B C D** 

**==> picture [543 x 436] intentionally omitted <==**

**----- Start of picture text -----**<br>
A Refrigeration unit S Static units above 0ºC<br>CONNECTION DIAGRAM type Y Static units below 0ºC<br>X Static units below 0ºC<br>Thermocouple C ventilated units below 0ºC<br>sensor -<br>+ - 4-20mA B Digital input 0 No digital input<br>24V 0V6 7 Input 5 M0 RTD6 7 5 4-20 mA6 7 + 12 Digital inputDigital input + alarm output<br>5 8 C Controller type E Economic<br>Alarm 4 9 Control Note :  When pin 11 and the sensor 0P Top versionTop version 16A relays & buzzer<br>N 3 10 are both earthed, the DTC410 will<br>2 11 display OPN and will not operate D Power supply L 12Vac/dc<br>1 correctly. For 24V models use an 0 230Vac<br>isolated or non-earthed sensor.<br>L<br>Note : All top versions include serial and HACCP link, quick mounting<br>system, back-lit key pad and removable terminals.<br>DIMENSIONS<br>Panel cut-out 45 x 45 mm -0+0.5<br>CONNECTION DIAGRAMS<br>PJ32 S0E PJ32 S0 & S1<br>8A SERIALHACCPLINK 16A<br>SET 9 8 7 6 5 3 2 1 9 8 PROGKEY 7 6 5 3 2 1<br>230Vac 230Vac<br>48 sq 5 70.5 14 12Vac/dc L L<br>J) sf 2___J |.adaLLNS<br>STANDARD ITEMS PJ32 S2 PJ32 X & Y<br>Input Voltage Part Number SERIALHACCPLINK Dig i/p 8A 8A SERIALHACCPLINK Optiondig i/p 8A 8A<br>Thermocouple 110Vac24Vac/dc DTC410-01-24DTC410-01-110 9 8 PROGKEY 7 6 5 4 3 2 1 9 8 PROGKEY 7 6 5 4 3 2 1<br>230Vac DTC410-01-230<br>PT100 24Vac/dc DTC410-02-24 230Vac L 12Vac/dc230Vac L<br>110Vac DTC410-02-110<br>230Vac DTC410-02-230 PJ32C<br>4-20 mA 24Vac/dc DTC410-03-24<br>SERIAL<br>110Vac DTC410-03-110 HACCPLINK 5A 5A 8A<br>230Vac DTC410-03-230<br>For suitable panel mounting or DIN rail wiring sockets see page 33. For 9 8 PROGKEY 7 6 5 4 3 2 1 Compressor<br>thermocouples, PT100 and other applicable types of sensor see L<br>page 26. 230Vac Fan<br>— - Defrost<br>RTD<br>44.5<br>Amb input Alarm Defrost i/p Amb input Deforst<br>Defrost i/p Amb input<br>Amb input Compressor Prod input Amb input Compressor<br>**----- End of picture text -----**<br>


## **CONNECTION DIAGRAM** 

**16** 

## **REFRIGERATION & AIR-CONDITIONING CONTROLLERS** 

## **DIMENSIONS** 

Supply: 12-24Vac/dc (110Vac & 240Vac via transformers TRA11 and TRA12 - see page 33) Supply drain: 3VA max. Protection: IP65 Approval: Conform to CE emc EN50081-1 & EN50082-1 and low voltage EN61010-1 directives. Ambient range: 0 to 50 Co Weight: IR32S: 160 gms IR32Y: 180 gms IR32C: 220 gms 

**==> picture [148 x 61] intentionally omitted <==**

**----- Start of picture text -----**<br>
81 65<br>36<br>**----- End of picture text -----**<br>


PANEL CUT OUT : 71 x 29mm 

## **CONNECTION DIAGRAM** 

## **STANDARD ITEMS** 

**==> picture [220 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
N<br>* [*] *<br>Aux<br>Output 4 Output 2 Output 3 L<br>(C types) (Y/C types) (C types)<br>_ | | fl<br>10 11 12 13 14 15 16 17 18<br>[LEI CLEL EL<br>Output 1<br>1 2 3 4 5 6 7 8 9<br>N L<br>Defroster Evap Fan<br>Compressor Supply Digital I/P Main I/P Defrost I/P (Y/C types)<br>**----- End of picture text -----**<br>


|**Version**<br>**Voltage**|**Unit type**|**Inputs**|**Part Number**|
|---|---|---|---|
|Basic<br>12Vac/dc<br>Basic<br>230Vac<br>Top<br>230Vac<br>Top<br>230Vac<br>Top<br>230Vac<br>Basic<br>12Vac/dc<br>Top<br>230Vac<br>Top<br>230Vac<br>Top<br>230Vac<br>Programming key<br>RS485 serial module<br>HACCP module|Static>0ºC<br>Static>0ºC<br>Static>0ºC<br>Static>0ºC<br>Static>0ºC<br>Static<0ºC<br>Static<0ºC<br>Static<0ºC<br>Ventilated<0ºC|1 NTC<br>1 NTC<br>1 NTC<br>2 NTC<br>1 NTC,1 dig<br>2 NTC<br>2 NTC<br>1 NTC, 1 dig<br>2 NTC|PJ32S0EL<br>PJ32S0E0<br>PJ32S000<br>PJ32S0P0<br>PJ32S200<br>PJ32Y0EL<br>PJ32Y000<br>PJ32X100<br>PJ32C000<br>PJOPZKEY00<br>PJOPZ48500<br>PJOPZHACP0|



For models with PTC probe inputs, digital input options, alternative or customised front panels, please contact our sales office. For suitable NTC and PTC probes see page 26. N L **IR32 ON/OFF REFRIGERATION CONTROLLER DIMENSIONS** 5 Panel Clip The IR32 series temperature controllers were designed specifically for refPRG rigeration and food processing appmute lications and therefore use the NTC sensor, ideal for operation over the SELrst temperature range -50 to +90ºC. Three models provide the flexibility of Terminal block controlling either 'static' refrigeration ~~<§__+~~ 75 extension on units with defrost by timed compressIR32Y & C only ~~7 =a~~ WE ~~S~~ or-off state or by a separate defrost sensor or for ventilated units where an additional output drives an evaporator fan. Remote control via a PC or the Panel hand held infra-red remote programmer provides added ease of setting. cut out : 71 x 29 Simple programming of regulator, compressor, defrost & alarm settings 1, 2 or 4 output options Single or dual NTC probe input Clearance around 8 Amp @ 250Vac relay outputs instrument to allow Infra-red, hand-held remote control programming option - see page 39 for panel clip : 95 x 40 RS232/485 programming and data analysis via serial link IP65 water and dust protection CE approval for emc and low voltage directives 64 8 

## **Model Descriptions** 

## **STANDARD ITEMS** 

||**Model No**|**Description**|
|---|---|---|
||IR32S0LBR0|Single relay compressor output and control set-point<br>suitable for 'static' refrigeration systems where the<br>defrost cycle can be timed during the compressor 'off'<br>state.|
||IR32Y0LBR0|Dual relay output, one to drive a compressor and the<br>other an electrical heater or hot gas defrost system.<br>Each is controlled from separate NTC sensors with<br>independent set-points.|
||IR32C0LBR0|4 relay outputs to drive a compressor, defrost heater<br>and ventilation fan. The fourth output may be used<br>to drive an indicator lamp or as an alarm. Two NTC<br>sensors and independent set-points provide flexible<br>and accurate control.|
|**SPECIFICATION**<br>Inputs:<br>Scale range:<br>Accuracy:||1 or 2 NTC sensor (PTC available on request)<br>NTC = - 40 to 90 C<br>PTC = - 40 to 120 C<br>+/- 1% of scale range<br>o<br>o|
|Outputs:||IR32S:<br>SPCO relay|
|Output ratings:||IR32Y:<br>2 x SPCO relay<br>IR32C:<br>4 x SPCO relay<br>8A @ 250Vac (10 A inrush)|



|**Control Type**|**Part Number**|
|---|---|
|1 Relay, timed defrost|IR32S0LBR0|
|2 Relays, temperature defrost|IR32Y0LBR0|
|4 Relays, ventilated temperature defrost|IR32C0LBR0|



For power supply transformers and IR remote controls see page 33. For NTC and PTC sensors see page 26. For matching timers see page 8. 

## **MICRO-CHILLER AIR-CONDITIONING CONTROLLERS** 

The µchiller compact has been specifically designed to control chillers and single compressor heat pumps. It will control air to air, air to water and water to water units with gas or water reversibility. The µchiller expansion boards allow full control of chillers with 1 or 2 hermetic compressors working also as heat pumps. A remote wall mounted terminal unit and fan speed control modules are also available as part of the µchiller range. 

## **SPECIFICATION** 

Controls AHUs, chillers and single compressor heat pumps Expansion board for 1 and 2 hermetic compressor control Wall mounted remote terminal unit 

**17** 

## **DIGITAL TEMPERATURE CONTROLLERS** 

## **DIMENSIONS** 

## **SPECIFICATION** 

**==> picture [260 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
µChiller compact > 5 Panel Clip<br>PRG<br>mute<br>=~ E] [4]<br>SEL<br>rst<br>P ed al (S S<br>75<br>Main board : 170 x 107<br>Expansion board : 82 x 107<br>Wall mounted remote terminal : 115 x 76 x 31<br>33 28<br>**----- End of picture text -----**<br>


Supply : 24Vac+/-10%, 50/60Hz Power drain : 3W Inputs : 3 x NTC probe (3/5 x NTC on expansion cards) 5 x volt free contacts (7/11 on expansion cards) Outputs : 5 NO relays 2A res @ 250Vac (5/8 on exp cards) 1 Pulse modulation (1/2 on expansion cards) Protection : µchiller compact : IP55 Wall mounted terminal : IP30 Ambient range : µchiller compact : -10 to 60ºC < 90%rH Expansion boards : -10 to 60ºC < 90%rH Wall mounted terminal : 0 to 50ºC < 90% rH Weight : µchiller compact : 250gms Main board : 150gms Expansion board : 120gms Wall mounted terminal : 270gms 

## **STANDARD ITEMS** 

|**Item**|**Options**|**Part Number**|
|---|---|---|
|µChiller compact<br>µChiller main board<br>µChiller expansion board<br>Panel mounted remote terminal<br>Wall mounted remote terminal<br>Serial Interface<br>Remote module<br>Pressure module<br>Program hardware key<br>µChiller compact|-<br>Screw terms<br>Screw terms<br>-<br>-<br>-<br>-<br>-<br>-<br>Buzzer, IR control|MCHSML000M<br>MCHCOMP1B0<br>MCHCOMP2B0<br>MCHTER00L0<br>MCHTER00C0<br>MCHSMLSER0<br>MCHREB000<br>MCHSML4200<br>MCHSMLKEY0<br>MCHSML0010|



**==> picture [286 x 623] intentionally omitted <==**

**----- Start of picture text -----**<br>
CONNECTION DIAGRAMS<br>µChiller Compact<br>!<br>9<br>£_§_"_{ ,———_“¥<br>OUTPUTS<br>BESEEER] cas<br>INPUTS<br>a<br>Program key<br>Inlet probe<br>SN<br>Outlet probe SN<br>Condensation probe Serial interface<br>remote terminal<br>Main board<br>Condensation probe<br>Outlet probe<br>Inlet probe 24Vac<br>24Vac<br>O<br>G OLLI G0 G T1 G T2 G T3 24V  CT 1 2 3 4 5 6 7 | :<br>Serial link<br>| G seooowwe Y1 NO C NO C NO C NC NO C NO C NC == O°<br>rt | | |<br>Md 1) COLO Io ! \|:<br>Ow ® oO lt<br>Terminal<br>unit<br>Expansion Board<br>Condensation probe 2 24Vac<br>Outlet probe 2<br>G B4 G B5 24V 8 9 10 11<br>TTLLD i<br>G Y2 NO C NO C NO C NC<br>TIC<br>Se) &<br>18<br>Heater<br>Valve Pump Alarm<br>Compressor<br>Start/stop  1<br>Low pressure Multifunction Multifunction High pressure 1 1<br>1<br>compressor fan<br>pressure pressure<br>high low<br>PC PC Overload Overload flowswitch start/stop cooling/heating<br>Com<br>Key<br>Fan 1<br>Heater 1 Comp 1 Valve Pump Alarm<br>PC hp 2 PC lp 2 O/l comp 2 O/l fan 2<br>2<br>Fan 2<br>Heater Comp 2 Valve 2<br>**----- End of picture text -----**<br>


To connect a wall mounted remote terminal a serial interface is required for the µchiller compact whereas a remote module is needed for the main board. The pressure module will allow connection of a suitable pressure transducer to the µchiller compact (SPK - see page 26) for condenser 

pressure control. 

**IR32 ON/OFF & PI TEMPERATURE & PROCESS CONTROLLER** ~~J~~ The IR32 series temperature controllers, with their analogue, thermocouple and RTD inputs and relay or SSR drive output options, combine simple control and programmability with flexibility of use . for a wide range of applications. They are available with 1, 2 or 4 outputs /set-points,can be configured for 9 different control modes including 

on/off, P or PI action and can be used to control temperature, humidity, air pressure or other media using suitable sensors - see pages 26-27 for details. 

9 pre-set control modes 

Temperature, humidity or air-pressure input sensor options 1, 2 or 4 output/set-point options Relay or SSR drive output options 

Infra-red, hand-held remote control programming option - see page 33 RS232/485 programming and data analysis via serial link IP65 water and dust protection 

CE approval for emc and low voltage directives Programmable advanced control options 

**SPECIFICATION** Supply: 12-24Vac/dc +/- 10% - for transformers see page 33 Supply drain: 3VA max. Probe supply: 10Vdc @ 30mA internal Inputs: Sensor: 1 or 2 NTC, PT100, J, K T/c, 4-20mA, -0.5 to 1V Digital input: Programmable function to switch between set-points or to act as an alarm condition. Scale range: NTC : -40 to 90 Co Pt100 : -99 to 600 Co J T/c : -99 to 800 Co K T/c: -99 to 999 Co mA/V : -99 to 999 units Accuracy: +/- 0.5% of scale range Output types: See connection diagrams Output ratings: Relay: 8A @ 250Vac (10 A inrush) SSR: 10V/25mA Protection: IP65 Approval: Conform to CE emc EN50081-1 & EN50082-1 and low voltage EN61010-1 directives. Ambient range: 0 to 50 C @ 90% rH (non-condensing)o Weight: IR32A: 240 gms IR32D: 200 gms IR32V: 200 gms IR32W: 220 gms IR32Z: 240 gms 

## **DIGITAL TEMPERATURE & PROCESS CONTROLLERS** 

## **Part Numbering Options : IR32 A B C 000** 

|**Part Numbering Options : IR32 A B C 000**|||||||||
|---|---|---|---|---|---|---|---|---|
|**Part Numbering Options : IR32 A B C 000**<br>A<br>Outputs<br>1 Relay<br>8A/250Vac<br>2 Relays<br>"<br>4 Relays<br>"<br>1 SSR<br>10V/25mA<br>4 SSRs<br>"|V<br>W<br>Z<br>D<br>A||**DIMENSIONS**<br>33<br>5<br>SEL<br>rst<br>PRG<br>mute<br>a~~)~~|||28<br>Panel Clip<br>=~~a~~|||
|**CONNECTION DIAGRAMS**<br>1<br>10<br>2<br>11<br>3<br>12<br>4<br>13<br>5<br>14<br>6<br>15<br>7<br>16<br>8<br>17<br>9<br>18<br>Supply<br>Digital I/P<br>NTC1<br>NTC2<br>(optional)<br>NTC/Relay Versions<br>NTC/SSR Versions<br>-<br>+<br>SSR Output 2<br>SSR output 3<br>(W/Z types)<br>(Z types)<br>-<br>+<br>-<br>+<br>SSR Output 4<br>(Z types)<br>Output 4<br>(Z types)<br>Output 2<br>Output 3<br>(W/Z types)<br>(Z types)<br>Output 1<br>B<br>Input<br>NTC probe<br>-50 to 90ºC<br>PT100 probe<br>-99 to 600ºC<br>J/K Thermocouple<br>0 to 999ºC<br>Current<br>4 to 20mA<br>Voltage<br>-0.5 to +1V<br>C<br>Options<br>Economic (V0 only)<br>No IR sensor or buzzer<br>Standard<br>IR sensor & buzzer<br>"<br>IR sensor & buzzer<br>Sy Sooo|0<br>1<br>2<br>3<br>4<br>E<br>L<br>0||75<br>70<br>Clearance around<br>instrument to allow<br>for panel clip : 95 x 40<br>64<br>8<br>Panel<br>cut out<br>: 71 x 29<br>**STANDARD ITEMS**<br>**OutputType**<br>**Input Type**<br>**Part Number**<br>1 Relay<br>NTC, economic<br>IR32V0E000<br>NTC<br>IR32V0L000<br>PT100<br>IR32V1L000<br>J/K thermocouple<br>IR32V2L000<br>4-20mA<br>IR32V3L000<br>-0.5 to 1V<br>IR32V4L000<br>2 Relays<br>NTC<br>IR32W00000<br>PT100<br>IR32W10000<br>J/K thermocouple<br>IR32W20000<br>4-20mA<br>IR32W30000<br>4 Relays<br>PT100<br>IR32Z10000<br>~~a |~~<br>-||||||
|10<br>11<br>12<br>13<br>14<br>15<br>16<br>17<br>18|||J/K thermocouple<br>1 SSR<br>PT100|||IR32Z20000<br>IR32D1L000|||
||||J/K thermocouple|||IR32D2L000|||
||||4 SSRs<br>PT100|||IR32A10000|||
||||J/K thermocouple|||IR32A20000|||



## **CONNECTION DIAGRAMS** 

NTC/Relay Versions 

**==> picture [543 x 573] intentionally omitted <==**

**----- Start of picture text -----**<br>
Output 4 Output 2 Output 3<br>(Z types) (W/Z types) (Z types)<br>64 8<br>10 11 12 13 14 15 16 17 18 -<br>STANDARD ITEMS<br>OutputType Input Type Part Number<br>1 2 3 4 5 6 7 8 9 1 Relay NTC, economic IR32V0E000<br>Sy Sooo NTC IR32V0L000<br>Output 1 PT100 IR32V1L000<br>J/K thermocouple IR32V2L000<br>4-20mA IR32V3L000<br>-0.5 to 1V IR32V4L000<br>NTC/SSR Versions 2 Relays NTC IR32W00000<br>SSR Output 4 SSR Output 2 SSR output 3 PT100 IR32W10000<br>(Z types) (W/Z types) (Z types) J/K thermocouple IR32W20000<br>- + - + - + 4-20mA IR32W30000<br>4 Relays PT100 IR32Z10000<br>10 11 12 13 14 15 16 17 18 J/K thermocouple IR32Z20000<br>1 SSR PT100 IR32D1L000<br>J/K thermocouple IR32D2L000<br>4 SSRs PT100 IR32A10000<br>J/K thermocouple IR32A20000<br>1 2 3 4 5 6 7 8 9 For power supply transformers and IR remote controls see page 33. For<br>NTC and PT100 sensors and suitable thermocouples see page 26. For<br>+ - matching timers see page 8.<br>SSR<br>Output 1<br>IRDR ON/OFF & PI TEMPERATURE & PROCESS CONTROLLER<br>T/C, Voltage & Current Input/Relay Versions<br>The IRDR series of temperature control-<br>Output 4 Output 2 Output 3 lers are designed specifically for in-panel,<br>(Z types) (W/Z types) (Z types) DIN-rail mounting. With their analogue,<br>10 11 12 13 14 15 16 17 18 7 8 9 thermocouple and RTD inputs and 1, 2 &<br>- T/C + 4 output options, they combine simplecontrol and programmability with flexibility<br>of use for a wide range of applications.<br>:<br>They can be configured for 9 different<br>control modes for on/off, P or PI action<br>1 2 3 4 5 6 7 8 9<br>7 8 9 and used to control temperature, humidity,<br>Output 1 - 10V O/P air-pressure or other media with suitable<br>transducers - see page 26-27 for details.<br>V/A DIN-rail mounting<br>9 programmable control modes<br>Temperature, humidity or air-pressure input sensor options<br>1, 2 or 4 output/set-point options<br>T/C, Voltage and Current Input/SSR Versions bial] sl = 2 Digital inputs to select temperatures or activate alarms.<br>Infra-red, hand-held remote control programming option<br>SSR Output 4 SSR Output 2 SSR output 3<br>(Z types) (W/Z types) (Z types) RS232/485 programming and data analysis via serial link<br>- + - + - + CE approval for emc and low voltage directives<br>Dual 12-24Vac/dc and 240Vac supply inputs (not all models)<br>10 11 12 13 14 15 16 17 18 7 8 9 SPECIFICATION<br>- T/C + Supply voltage: 12-24Vac/dc +/- 10% - for transformers see page 33<br>Supply drain: 3VA max.<br>Inputs: Sensor: 1 or 2 NTC, PT100, J, K t/c, 4-20mA, -0.5 to 1V<br>Digital inputs: 2 - programmable function to switch between set-points<br>or to act as an alarm.<br>1 2 3 4 5 6 7 8 9 7 8 9 Scale range: NTC : -40 to 90 Coo<br>+ - - 10V O/P Pt100 :J T/c :J T/c : -99 to 600 C-99 to 800 Coo-99 to 800 Coo<br>SSR K T/c: -99 to 999 Coo<br>Output 1 V/A<br>Supply<br>Digital I/P PT100<br>Supply Digital I/P NTC1 NTC2<br>(optional)<br>Supply Digital I/P NTC1 NTC2 (optional)<br>Supply Digital I/P PT100<br>**----- End of picture text -----**<br>


NTC : -40 to 90 Coo ooo Pt100 :J T/c :J T/c : -99 to 600 C-99 to 800 Coo-99 to 800 Coo K T/c: -99 to 999 Coo mA/V : -99 to 999 units 

**19** 

## **DIGITAL TEMPERATURE & PROCESS CONTROLLERS** 

Accuracy: +/- 0.5% of scale range Output types: See connection diagrams Output ratings: Relay: 8A @ 250Vac (10 A inrush) SSR: 10V/25mA Probe supply: 10Vdc @ 30mA internal Protection: IP40 Approval: Conforms to CE emc EN50081-1 & EN50082-1 and low voltage EN61010-1 directives. Ambient range: 0 to 50 C @ 90% rH (non-condensing)o Weight: IRDRV : 220 gms IRDRW : 240 gms 

## **OUTPUT CONVERSION MODULES** 

These modules can be connected to the SSR output of an IR32 or IRDR controller and will convert the 10V PWM output into a 0-10V, 4-20mA or on/off relay output. All models operate from a 24Vac supply voltage. Whilst they were designed specifically for use with the IR range of temperature controllers, they can be used in conjunction with any controller that has a 10Vdc PWM or 10Vdc on/off output. 

## **CONNECTION DIAGRAM** 

**==> picture [542 x 628] intentionally omitted <==**

**----- Start of picture text -----**<br>
output.<br>Converts SSR control output to 0-10V, 4-20mA or on/off relay output<br>CTT SPECIFICATION : DIN rail mounting<br>1 2 3<br>Supply voltage : 24Vac +/- 10% 50/60Hz<br>Power drain : 50mA max (30mA On/Off version)<br>O/P2 O/P1 Input : CONV0/10A : 10VdcPWM,10/20mA, impedance 200<br>Outputs<br>min time 8ms, max time 0.2s<br>IRDRV = 1 7<br>IRDRV & W models IRDRW = 1 & 2 PT100 CONVONOFF : 10Vdc on/off 10/20mA imp 200<br>Output : CONV0/10A : voltage : 0-10V, 5mA max<br>1 3<br>- T/c + current : 4-20mA 7Vdc max<br>response time 1.2 secs<br>1 2 3 CONVONOFF : SPCO relay 10A @ 250Vac resistive<br>Tr) Ambient range : 0 to 50ºC 90%rH (non condensing) operating<br>1 2 3<br>- 10V O/P Protection level : IP20-10 to 70ºC 90%rH storage<br>Weight : 80gms<br>V/A<br>ITB<br>CONNECTION DIAGRAMS<br>CONVONOFF CONV0/10A<br>24Vac Signal 24Vac Signal<br>+ input - + input _<br>1 2 3<br>UUIVIU O/P3 O/P2 O/P1 O/P4 5<br>1 2 3 4 1 2 3 4<br>bl} | pods) pesos<br>PT100<br>IRDRZ model<br>1 3 5 6 7 8 5 6 7 8<br>- T/c +<br>1 2 3<br>1 2 3<br>oo) - 10V O/P epee NO NC p99] G G<br>COM 0-10V 4-20mA<br>V/A output output<br>DIMENSIONS 35 10 50<br>DIMENSIONS 70 65<br>BAG is. lm<br>SEL<br>=—j PRG |o| &. i<br>mute STANDARD ITEMS<br>Input Output Part Number<br>10VdcPWM 0-10V/4-20mA CONV0/10A<br>=a | 10Vdc on/off SPCO relay 7 CONVONOFF<br>Panel cut-out : 70 x 45 15<br>S S —— C1 1/32 DIN PID TEMPERATURE & PROCESS CONTROLLER<br>STANDARD ITEMS<br>Output Type Input Type Part Number These microprocessor based PID<br>auto-tune controllers are simple to<br>1 relay NTC IRDRV00000<br>configure and operate. Covering the<br>PT100 IRDRV10000<br>standard range of input sensors with<br>J/K thermocouple IRDRV20000<br>control and alarm outputs, continuous<br>2 relays NTC IRDRW00000<br>retransmission, custom linearisation<br>PT100 IRDRW10000<br>and optional serial communications,<br>J/K thermocouple IRDRW20000 the C1 series controller combines<br>4 relays PT100 IRDRZ10000<br>flexibility with an extremely compact<br>J/K thermocouple IRDRZ20000<br>1/32 DIN 48 x 24mm package.<br>Wall mounting enclosure GR15070P<br>88<br>220-240Vac 24Vac N<br>DI1 DI2 NTC1 NTC2 (optional)<br>12-24Vac/dc DI1 DI2 NTC1 NTC2 (optional)<br>87<br>**----- End of picture text -----**<br>


Fuzzy autotune and adaptive algorithms Programmable alarms Relay or triac + SSR output Clear 4 digit LED display IP65 front panel protection Transmitter power supply 

For IR remote controls see page 33. For suitable NTC and PT100 sensors and thermocouples see page 26. 

**20** 

**DIGITAL TEMPERATURE & PROCESS CONTROLLERS** 

## **SPECIFICATION** 

Power supply : 100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc Supply variation : -15% +10% of supply voltage Input sensors : J, K, L, T, S thermocouples, PT100, 0/4 to 20mA, 0/10 to 50mV Scale ranges : PT100 -99.9 to 300ºC PT100 -200 to 600ºC L & J t/c 0 to 600ºC T t/c -200 to 400 ºC K t/c 0 to 1200ºC S t/c 0 to 1600ºC 

- Operating modes : Indicator with 2 alarms 1 PID or on/off loop with 1 alarm 

Accuracy : +/- 0.25% of scale range +/- 1 digit (RTD & t/c) +/- 0.1% of scale range (mA & mV) Output 1 : SPST N.O. relay 2A/250Vac resistive or Triac 2A/250Vac for contactor coil Output 2 : SSR drive 0-5Vdc +/-10%, 30mA max, not isolated Serial interface : RS485 isolated for Modbus/Jbus protocols Auxilliary supply : 18Vdc +/-20%, 30mA max for transmitter supply Approvals : Conforms to CE standards EN50081-1 and EN50082-1 for emc and EN61010-1 for low voltage. Protection : IP65 Ambient temp : 0 to 50ºC non condensing Weight : 100gms 

## **Part Numbering Options : C1- A B C D -0000** 

|A|Power<br>supply|100 - 240Vac<br>24Vac/dc|3<br>5|
|---|---|---|---|
|B|Output 1|Relay<br>Triac|0<br>3|
|CD|Options|None<br>Auxilliary transmitter power supply<br>Aux power supply+ PV retransmission<br>RS485<br>RS485 + aux power supply|00<br>06<br>07<br>50<br>56|



## **M1 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER** ~~Do~~ 

These microprocessor based PID autotune controllers are simple to configure and operate. With a single clear 4 digit LED display, 1 control and 1 alarm output, the M1 series is an economical solution to PID control problems in a standard 1/16 DIN 48 x 48mm package. Suitable for use with the standard range of input sensors, the M1 has optional PV re-transmission and serial communications. 

Fuzzy autotune and adaptive algorithms Programmable alarms Relay or triac + SSR output options Single 4 digit LED display IP65 front panel protection Transmitter power supply 

## **SPECIFICATION** 

Power supply : 100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc Supply variation : -15% +10% of supply voltage Input sensors : J, K, L, T, S Thermocouples, PT100, 0/4 to 20mA, 0/10 to 50mV 

Scale ranges : PT100 -99.9 to 300ºC PT100 -200 to 600ºC L & J t/c 0 to 600ºC T t/c -200 to 400 ºC K t/c 0 to 1200ºC S t/c 0 to 1600ºC Accuracy : +/- 0.25% of scale range +/- 1 digit (RTD & t/c) +/- 0.1% of scale range (mA & mV) Operating modes : Indicator with 2 alarms 1 PID or on/off loop with 1 alarm Output 1 : SPST N.O. relay 2A/250Vac resistive or Triac 1A/250Vac for contactor coil Output 2 : SSR drive 0-5Vdc +/-10%, 30mA max, not isolated and SPST N.O. relay 2A/250Vac resistive Serial interface : RS485 isolated for Modbus/Jbus protocols Auxilliary supply : 18Vdc +/-20%, 30mA max for transmitter supply Approvals : Conforms to CE standards EN50081-1 and EN50082-1 for emc and EN61010-1 for low voltage. Ambient temp : 0 to 50ºC non condensing Weight : 130gms 

## **Part Numbering Options : M1- A B C D -0000** 

## **CONNECTION DIAGRAM** 

+ RS485 - +18Vdc OP.2 5 6 Thermocouple A Power 100 - 240Vac - + supply 24Vac/dc & B Output 1 Relay 7 8 9 10 11 12 5 6 Voltage Triac - + CD Serial None comms Aux transmitter power supply 1 2 3 4 5 6 Current Aux power supply + PV retransmission 5 6 External shunt RS485 PT100 - + 2.5ohm RS485 + aux power supply L N OP.1 **CONNECTION DIAGRAM** Retransmission RS485 comms : (option) (option) **DIMENSIONS** 5 1 L 7 + 48 9 120 CurrentExternal shunt6 Supply 2 N 8 - Output 2(Relay) 2.5ohm Output 1 18Vdc 5 3 9 + 15 Voltage 6 eg 4 8 10 Output 2 & 16 ~~a~~ p | ee 5 - 11 (SSR) 5 PT100 6 + 12 6 ~~Hi~~ ja < Panel cut-out : 45 x 22.5 +0.5-0 Thermocouple **DIMENSIONS STANDARD ITEMS** 48 sq 9 120 **Voltage Output 1 Comms Part Number** 100-240Vac Relay None C1-3000-0000 ~~i~~ 100-240Vac Relay RS485 C1-3050-0000 100-240Vac Triac None C1-3300-0000 24Vac/dc Relay None C1-5000-0000 24Vac/dc Relay RS485 C1-5050-0000 For suitable input sensors see page 26. ~~=~~ **21** Panel cut-out : 45 x 45 +0.5 

|A|Power<br>supply|100 - 240Vac<br>24Vac/dc|3<br>5|
|---|---|---|---|
|B|Output 1|Relay<br>Triac|0<br>3|
|CD|Serial<br>comms|None<br>Aux transmitter power supply<br>Aux power supply + PV retransmission<br>RS485<br>RS485 + aux power supply|00<br>06<br>07<br>50<br>56|



For suitable input sensors see page 26. 

+0.5 -0 

**DIGITAL TEMPERATURE & PROCESS CONTROLLERS** 

## **STANDARD ITEMS** 

**==> picture [538 x 385] intentionally omitted <==**

**----- Start of picture text -----**<br>
STANDARD ITEMS CONNECTION DIAGRAM<br>Retransmission RS485 comms<br>Voltage Output 1 Comms Part Number (option) (option)<br>+<br>100-240Vac Relay None M1-3000-0000 1 L 7 13<br>100-240Vac Relay RS485 M1-3050-0000 Supply -<br>100-240Vac Triac None M1-3300-0000 VLA 2 N = 8 7 14 Output 3 os<br>24Vac/dc24Vac/dc RelayRelay NoneRS485 M1-5050-0000M1-5000-0000 Output 1 3 18Vdc 9 + 15 (Relay/triac)<br>A |] 4 e-—_]J 10 a 16<br>For suitable input sensors see page 26 (Relay/triac) 5 - 11 Output 2(SSR) 17 Output 2 (Relay)<br>10A -<br>| M3 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER PT100 Te 6 + 12 =e 18 Current 100A<br>transformer<br>These microprocessor based PID (option)<br>autotune controllers are simple to 5 5 5<br>configure and operate. With a dual 4<br>= digit LED display, showing set point and ~ CI a 6 TH). 6 6<br>~BICOC process value, up to 2 PID control ots Current  5S<br>outputs and 1 alarm output, the M3series is a sophisticated PID controller. DIMENSIONS External shunt2.5ohm Voltage Thermocouple<br>COG. Housed in a standard 1/16 DIN 48 x 48 sq _» 9 120<br>48mm package and suitable for use with<br>the standard range of input sensors, the<br>M3 has optional PV re-transmission and<br>serial communications.<br>Fuzzy autotune and adaptive algorithms Up to 2 PID control outputs<br>e) Fal<br>Programmable alarm functions Relay or triac + SSR outputs<br>; Dual 4 digit LED display re) IP65 front panel protection Pad  == be]<br>O Transmitter power supply O Serial communications =<br>Panel cut-out : 45 x 45 +0.5-0<br>SPECIFICATION STANDARD ITEMS<br>Power supply : 100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc Voltage Output 1/3 Comms Part Number<br>Supply variation : -15% +10% of supply voltage<br>Input sensors : J, K, L, T, S Thermocouples, PT100, 0/4 to 20mA, 100-240Vac Relay/relay None M3-3100-0000<br>0/10 to 50mV 100-240Vac Relay/relay RS485 M3-3150-0000<br>Scale ranges : PT100 -99.9 to 300ºC 100-240Vac Relay/triac None M3-3200-0000<br>PT100 -200 to 600ºC 24Vac/dc Relay/relay None M3-5100-0000<br>24Vac/dc Relay/relay Rs485 M3-5150-0000<br>44 sq<br>**----- End of picture text -----**<br>


## **SPECIFICATION** 

|**SPECIFICATION**||
|---|---|
|Power supply :<br>Supply variation :<br>Input sensors :|100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc<br>-15% +10% of supply voltage<br>J, K, L, T, S Thermocouples, PT100, 0/4 to 20mA,<br>0/10 to 50mV|
|Scale ranges :|PT100<br>-99.9 to 300ºC<br>PT100<br>-200 to 600ºC<br>L & J t/c<br>0 to 600ºC|
||T t/c<br>-200 to 400 ºC|
||K t/c<br>0 to 1200ºC|
|Accuracy :|S t/c<br>0 to 1600ºC<br>+/- 0.25% of scale range +/- 1 digit (RTD & t/c)|
|+/- 0.1% of scale range (mA & mV)<br>Operating modes : 1 PID or on/off loop with 2 alarms<br>2 PID or on/off heat-cool loops with 1 alarm<br>Output 1/3 :<br>SPST N.O. relay 2A/250Vac resistive or<br>Triac 1A/250Vac for contactor coil||
|Output 2 :<br>Serial interface :|SSR drive 0-5Vdc +/-10%, 30mA max, not isolated and<br>SPST N.O. relay 2A/250Vac resistive<br>RS485 isolated for Modbus/Jbus protocols|
|Auxilliary supply :<br>Approvals :|18Vdc +/-20%, 30mA max for transmitter supply<br>Conforms to CE standards EN50081-1 and EN50082-1<br>for emc and EN61010-1 for low voltage.|
|Protection :<br>Ambient temp :<br>Weight :|IP65<br>0 to 50ºC non condensing<br>130gms|



For suitable input sensors see page 26. 

**M4 1/16 DIN PID TEMPERATURE & PROCESS CONTROLLER** ~~Po~~ These microprocessor based PID autotune controllers are simple to configure and operate. With a dual 4 digit LED display, showing set point and process value, up to 2 PID control outputs, 1 alarm output and ramp/dwell functions the M4 series is a sophisticated PID controller. Housed in a standard 1/16 =—— DIN 48x48 package and suitable for use a Pe Be with the standard range of input sensors, the M4 has an optional 4-20mA analogue output and serial communications. 

> Fuzzy autotune and adaptive algorithms O Up to 2 PID control outputs Oo Ramp and dwell functions O Optional 4-20mA output Oo Relay or triac + SSR output O IP65 front panel protection Oo Transmitter power supply O Serial communications **SPECIFICATION** Power supply : 100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc Supply variation : -15% +10% of supply voltage Input sensors : J, K, L, T, S Thermocouples, PT100, 0/4 to 20mA, 0/10 to 50mV Scale ranges : PT100 -99.9 to 300ºC PT100 -200 to 600ºC L & J t/c 0 to 600ºC T t/c -200 to 400 ºC K t/c 0 to 1200ºC S t/c 0 to 1600ºC Accuracy : +/- 0.25% of scale range +/- 1 digit (RTD & t/c) +/- 0.1% of scale range (mA & mV) Operating modes : 1 PID or on/off loop with 2 alarms 2 PID or on/off heat-cool loops with 1 alarm Output 1 : SPST N.O. relay 2A/250Vac resistive or Triac 1A/250Vac resistive Output 2 : SSR drive 0-5Vdc +/-10%, 30mA max, not isolated & SPST N.O. relay 2A/250Vac resistive Output 3 : SPST N.O. relay 2A/250Vac resistive or Triac 1A/250Vac resistive 

## **Part Numbering Options : M3- A B C D -0000** 

|A|Power<br>supply|100 - 240Vac<br>24Vac/dc|3<br>5|
|---|---|---|---|
|B|Output 1/ 3|Relay/Relay<br>Relay/Triac<br>Triac/Relay<br>Triac/Triac|1<br>2<br>4<br>5|
|CD|Options|None<br>Current transformer input<br>Aux transmitter power supply<br>Aux power supply + PV retransmission<br>Aux supply + current transformer<br>RS485<br>RS485 + aux power supply<br>RS485 + current transformer|00<br>03<br>06<br>07<br>08<br>50<br>56<br>58|



> **22** D 

## **DIGITAL TEMPERATURE & PROCESS CONTROLLERS** 

## **M5 1/16 DIN PID PROCESS CONTROLLER/PROGRAMMER** ——— 

Output 4 : 4-20 mA analogue control output (optional) Serial interface : RS485 isolated for Modbus/Jbus protocols Auxilliary supply : 18Vdc +/-20%, 30mA max for transmitter supply Approvals : Conforms to CE standards EN50081-1and EN50082-1 for emc and EN61010-1 for low voltage. Ambient temp : 0 to 50ºC non condensing Weight : 130gms 

The M5 series is a PID autotune set point programmer. Despite its advanced features, the M5 remains user friendly due to its simple and customisable procedures. With a sampling time of 0.1secs, up to 16 program segments, configurable outputs, programmable alarm functions and serial communications facilities, the M5 is a powerful process controller/programmer in a compact 1/16 DIN 48 X 48mm package. 

## **Part Numbering Options : M4 - A B C D - E 000** 

|A|Power<br>supply|100 - 240Vac<br>24Vac/dc|3<br>5|
|---|---|---|---|
|B|Output 1/ 3|Relay/Relay<br>Relay/Triac<br>Triac/Relay<br>Triac/Triac|1<br>2<br>4<br>5|
|CD<br>E|Options<br>Special<br>functions|None<br>Current transformer input<br>Aux transmitter power supply<br>Aux power supply + control output<br>Aux power supply + current transformer<br>Aux supply + control o/p+ current tfmr<br>RS485<br>RS485 + aux power supply<br>RS485 + current transformer<br>Digital input<br>Digital input + current transformer<br>Digital input + control output<br>Digital i/p + control output + current tfmr<br>None<br>Start-up + timer functions|00<br>03<br>06<br>07<br>08<br>09<br>50<br>56<br>58<br>90<br>93<br>97<br>99<br>0<br>2|



Fuzzy autotune and adaptive algorithms 0.1 sec sampling time Multiple outputs modes Up to 16 program segments Ramp and dwell functions Remote set point facility Transmitter power supply Serial communications 

## **SPECIFICATION** 

Power supply : 100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc Supply variation : -15% +10% of supply voltage Input sensors : J, K, L, T, S Thermocouples, PT100, 0/4 to 20mA, 

J, K, L, T, S Thermocouples, PT100, 0/4 to 20mA, 0/10 to 50mV 

Scale ranges : PT100 -99.9 to 300ºC PT100 -200 to 600ºC Scale ranges : L & J t/c 0 to 600ºC T t/c -200 to 400 ºC K t/c 0 to 1200ºC S t/c 0 to 1600ºC Accuracy : +/- 0.25% of scale range +/- 1 digit (RTD & t/c) +/- 0.1% of scale range (mA & mV) Operating modes : 1 P, PD, PID or on/off loop with 2 or 3 alarms 2 P, PD, PID or on/off heat-cool loops with 1 or 2 alarms Output 1 : SPST N.O. relay 2A/250Vac resistive or Triac 1A/250Vac resistive Output 2 : SPST N. O. relay 2A/250Vac resistive or Triac 1A/250Vac resistive 

## **CONNECTION DIAGRAM** 

Output 3 : SPST N.O. Relay 2A/250Vac resistive Output 4 : 4-20mA, 0-10V or potentiometer options Serial interface : RS485 isolated for Modbus/Jbus protocols Auxilliary supply : 18Vdc +/-20%, 30mA max for transmitter supply Approvals : Conforms to CE standards EN50081-1 and EN50082-1 for emc and EN61010-1 for low voltage. Ambient temp : 0 to 50ºC non condensing Weight : 230gms 

**==> picture [539 x 413] intentionally omitted <==**

**----- Start of picture text -----**<br>
Analogue<br>Control output RS485 comms Output 4 : 4-20mA, 0-10V or potentiometer options<br>(option) (option) Serial interface : RS485 isolated for Modbus/Jbus protocols<br>+ Auxilliary supply : 18Vdc +/-20%, 30mA max for transmitter supply<br>1 L 7 13 Approvals : Conforms to CE standards EN50081-1 and EN50082-1<br>Supply - for emc and EN61010-1 for low voltage.<br>2 N 8 14 Output 3 Ambient temp : 0 to 50ºC non condensing<br>Output 1 3 18Vdc 9 + 15 Weight : 230gms<br>TYPICAL PROGRAM<br>4 10 16<br>£[l5 5h Output 2 Fc Output 2 (Relay) SP0 SP1 SP2 SP3 SP4 SP5 SP9 SP10 SP11 SP12 SP13 SPF<br>5 - 11 (SSR) 17<br>5 5 | ,<br>6 + 12 18<br>PT100 | | | pio Current<br>transformer<br>(option)<br>— Time<br>Digital input (option)<br>Input options<br>5 5 5 9 + Segment Initial 1 2 3 4 5 ...... 9 10 11 12 13 14 End<br>Time t0 t1 t2 t3 t4 t5 ...... t9 t10 t11 t12 t13 t14<br>6 6 6<br>Current<br>External shunt Voltage Thermocouple 11 - Part Numbering Options : M5 - A B C D - E 000<br>w3 2.5ohm oR Ty EEE EEE<br>DIMENSIONS A Power 100 - 240Vac 3<br>48 sq 9 120 supply 24Vac/dc 5<br>B Output 1/ 2 Relay/Relay 1<br>Relay/Triac 2<br>Triac/Relay 4<br>Triac/Triac 5<br>CD Options None 00<br>Feedback potentiometer input 01<br>Remote setpoint input 02*<br>Current transformer input 03<br>aoe i mn +0.5 | Logic/continuous output 04<br>Panel cut-out : 45 x 45 -0 Logic/cont + remote setpoint output 05*<br>STANDARD ITEMS RS485 50<br>Voltage Output 1/3 Options Part Number RS485 + feedback potentiometer input 51<br>RS485 + remote setpoint input 52*<br>100-240Vac Relay/relay 4-20mA output M4-3107-0000 RS485 + current transformer input 53<br>100-240Vac Relay/relay RS485, DI, 4-20mA o/p M4-3197-0000 RS485 + Logic/continuous output 54<br>100-240Vac Relay/relay RS485, DI, 4-20mA o/p, timer M4-3197-2000<br>24Vac/dc Relay/relay 4-20mA output M4-5100-0000 E Setpoint Not fitted 0<br>program Fitted (adaptive tuning not active) 1<br>44 sq<br>Temperature<br>Program start<br>**----- End of picture text -----**<br>


For suitable input sensors see page 26. 

* Not available with setpoint program installed (E=1) 

**23** 

**DIGITAL TEMPERATURE & PROCESS CONTROLLERS** 

## **DIMENSIONS** 

## **SPECIFICATION** 

48 sq 9 150 Power supply : Supply variation : Input sensors : 17 | Scale ranges : RTDs : Thermocouples : A/M * ~~MASE~~ i Panel cut-out : 45 x 45 ~~k~~ +0.5-0 **CONNECTION DIAGRAM** RS485 comms (option) Output 3 1 + 7 13 L Supply 2 - 8 14 N Current: 18Vdc 3 + 9 + 15 Digital input IL1 Voltage :Accuracy :Accuracy : Output 1 4 + 10 16 Operating modes : 5 + 11 17 Output 1 : 6 - 12 18 Output 2 Output 2 : nA: Sensor input options :- Input/output options :- Output 3 : Thermocouple Current/voltage output, logic input Output 4 : 5 Digital inputIL2 + 10 Output 5 :Serial interface : 6 + ce, —o 11 Auxilliary supply : PT100 - Approvals : 4 12 5 Current transformer inputmA mV - V Ambient temp : Digital input + Weight : 6 IL2 10 a eb ~~5~~ , **DIMENSIONS** Current/voltage 10A -100A ~~=~~ 11 48 12 5 mA mV - V 6 Potentiometer input 100%+ 10 (No IL2) 10 - 100K 11 <——O - ~~i~~ cdd 12 **STANDARD ITEMS** 0% **Voltage Output 1/2 Options Part Number** 100-240Vac Relay/relay None M5-3100-0000 100-240Vac Relay/relay Setpoint programmer M5-3100-1000 100-240Vac Relay/relay RS485, programmer M5-3150-1000 24Vac/dc Relay/relay None M5-5100-0000 24Vac/dc Relay/relay RS485 comms M5-5150-0000 Oe ~~=~~ For suitable input sensors see page 26. 

Power supply : 100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc Supply variation : -15% +10% of supply voltage Input sensors : B, E, J, K, L, N, R, T, S thermocouples, PT100, 0/4 to 20mA, 0/10 to 50mV 

Scale ranges : RTDs : PT100 -99.9 to 300ºC PT100 -200 to 600ºC Thermocouples : B t/c 0 to 1800ºC E-L-J t/c 0 to 600ºC K t/c 0 to 1200ºC N t/c 0 to 1200ºC R t/c 0 to 1600ºC S t/c 0 to 1600ºC T t/c -200 to 400 ºC T/c Ni-NiMo18% 0 to 1100ºC T/c W3%Re-W25%Re 0 to 2000ºC T/c W5%Re-W26%Re 0 to 2000ºC Current: 0/4-20mA : { Configurable in engineering units Voltage :Accuracy :Accuracy : 0/10 - 50mV :+/- 0.25% of scale range +/- 1 digit (RTD & t/c){ mA, mV, V, bar, psi, rH, ph +/- 0.1% of scale range (mA & mV) Operating modes : 1 PID or on/off loop with 2 or 3 alarms 2 PID or on/off heat-cool loops with 1or 2 alarms Output 1 : SPST N.O. relay 2A/250Vac resistive or Triac 1A/250Vac resistive 

SPST N.O. relay 2A/250Vac resistive or Triac 1A /250Vac resistive 

SPDT N.O.Relay 2A/250Vac resistive SSR drive 0-5Vdc +/-10%, 30mA max, non isolated Analogue control output (optional) RS485 isolated for Modbus/Jbus protocols 24Vdc +/-20%, 30mA max for transmitter supply Conforms to CE standards EN50081-1 and EN50082-1 for emc and EN61010-1 for low voltage. 0 to 50ºC non condensing 250gms 

**==> picture [188 x 112] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIMENSIONS<br>48 9 110<br>i cdd<br>96<br>**----- End of picture text -----**<br>


**==> picture [7 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
91<br>**----- End of picture text -----**<br>


Panel cut-out : 92 x 45 +0.5-0 

**==> picture [404 x 225] intentionally omitted <==**

**----- Start of picture text -----**<br>
CONNECTION DIAGRAM<br>+ 1 13 NC 25 L<br>The X1 series microprocessor RS485 - 7 2 g 14 NC 7 26 SupplyN<br>based PID controllers are a cost C || [| |<br>3 15 NC 27<br>effective solution to heat-cool<br>= Oo -H}+—a<br>applications. The X1 has up to 2 4 NC 16 NC 28<br>PID control outputs, programmable 5 NC 17 NC 29 Output 3<br>alarm functions and optional serial<br>communications, remote setpoint 6 NC 18 NC 30<br>O O :<br>adjustment and ramp-dwellfunctions. The IP65 rated 1/8 DIN E 7 NC A 19 Output 5+ 31 Output1<br>96x48 case has a clear dual LED Current 8 20 - 32<br>display showing the process value transfmr 9 21 NC 33 Output2<br>and setpoint as well as functionindicators. + 10 22 NC 34 -<br>11 23 - 35 +Output 4<br>PT100 - +<br>12 24 36 + 24Vdc<br>Ramp and dwell functions<br>Remote set point facility Thermocouple Remote<br>Dual 4 digit LED display input + setpoint<br>Heater break detection 11<br>Serial communications - 12<br>**----- End of picture text -----**<br>


## **X1 1/8 DIN PID TEMPERATURE & PROCESS CONTROLLER** ~~CF~~ 

Fuzzy autotune and adaptive algorithms Programmable alarm functions Wide range of thermocouple inputs IP65 front panel protection Analogue output 

**24** 

## **DIGITAL TEMPERATURE & PROCESS CONTROLLERS** 

## **Part Numbering Options : X1 - A B C D - E 000** 

Serial interface : RS485 isolated for Modbus/Jbus protocols Auxilliary supply : 24Vdc +/-20%, 30mA max for transmitter supply Approvals : Conforms to CE standards EN50081-1 and EN50082-1 for emc and EN61010-1 for low voltage. Ambient temp : 0 to 50ºC non condensing Weight : 250gms 

|**Part Numbering Options : X1 - A B C D - E 000**|**Part Numbering Options : X1 - A B C D - E 000**|**Part Numbering Options : X1 - A B C D - E 000**|**Part Numbering Options : X1 - A B C D - E 000**|
|---|---|---|---|
|**Part Numbering Options : X1 - A B C D - E 000**||||
|A|Power<br>supply|100 - 240Vac<br>24Vac/dc|3<br>5|
|B|Output 1/ 2|Relay/Relay<br>Triac/Triac|1<br>5|
|C|Serial<br>comms|None<br>RS485|0<br>5|
|D|Options|None<br>Analogue output + remote setpoint|0<br>5|
|E|Special<br>functions|None<br>Start-up + timer functions|0<br>2|



**==> picture [51 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIMENSIONS<br>**----- End of picture text -----**<br>


**==> picture [250 x 106] intentionally omitted <==**

**----- Start of picture text -----**<br>
48 9 110<br>| | |<br>I1 I2 I3<br>4 OAg<br>4 580 96 91<br>**----- End of picture text -----**<br>


## **STANDARD ITEMS** 

**Voltage Output 1/2 Options Part Number** 100-240Vac Relay/relay None X1-3100-0000 100-240Vac Relay/relay Start-up/timer X1-3100-2000 100-240Vac Relay/relay RS485 comms X1-3150-0000 24Vac/dc Relay/relay None X1-5100-0000 24Vac/dc Relay/relay RS485 comms X1-5150-0000 

**==> picture [54 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
A/M *<br>**----- End of picture text -----**<br>


Panel cut-out : 92 x 45 +0.5-0 

For suitable input sensors see page 26. 

## **CONNECTION DIAGRAM** 

## **X3 1/8 DIN PID TEMPERATURE & PROCESS CONTROLLER** ~~|~~ 

7 The X3 series microprocessorbased PID controllers are a cost effective solution to double action =< valve control applications. The X3 has up to 2 PID control outputs, 4uo80 programmable alarm functions and optional serial communications, _~4SBC remote setpoint adjustment and ramp - dwell functions. The IP65 rated 1/8 DIN 96x48 case has a clear dual LED display showing the : process value and setpoint as well as function indicators. 

**==> picture [260 x 208] intentionally omitted <==**

**----- Start of picture text -----**<br>
+ 7 1 = 13 NC 7 25 L<br>RS485 - 2 14 NC 26 SupplyN<br>C 7 Z 7<br>3 15 NC 27<br>4 16 NC 28<br>1 4 = = L<br>Digitalinputs 2 5 5 o 17 NC no, 29 Output 3<br>7 6 Z 18 NC 7 30<br>3<br>7 19 + 31<br>Output 5 Output1<br>Current 5 8 F- 20 - F£ 32<br>transfrmr Output2<br>9 21 NC 33<br>+ 10 22 NC 34 -<br>t h 11 4 23 - E 35 +Output 4<br>PT100 - +<br>iyTh 12 OU 24 = 36 + 24Vdc<br>Thermocouple A + 11 Remotesetpoint<br>- 12<br>So<br>**----- End of picture text -----**<br>


= 

Ramp and dwell functions Remote set point facility 3 Digital inputs Heater break detection Serial communications 

Fuzzy autotune and adaptive algorithms Programmable alarm functions Wide range of thermocouple inputs IP65 front panel protection Analogue output with pot feedback 

## **SPECIFICATION** 

Power supply : 100 - 240Vac @ 50/60Hz, 24Vac @50/60Hz, 24Vdc Supply variation : -15% +10% of supply voltage Input sensors : B, E, J, K, L, N, R, T, S thermocouples, PT100, 0/4 to 20mA, 0/10 to 50mV 

## **Part Numbering Options : X3 - A B C D - E 000** 

Scale ranges : RTDs : PT100 -99.9 to 300ºC PT100 -200 to 600ºC Thermocouples : B t/c 0 to 1800ºC E-L-J t/c 0 to 600ºC K t/c 0 to 1200ºC N t/c 0 to 1200ºC R t/c 0 to 1600ºC S t/c 0 to 1600ºC T t/c -200 to 400 ºC T/c Ni-NiMo18% 0 to 1100ºC T/c W3%Re-W25%Re 0 to 2000ºC T/c W5%Re-W26%Re 0 to 2000ºC 

|A<br>Power<br>100 - 240Vac<br>supply<br>24Vac/dc||3<br>5|
|---|---|---|
|B<br>Output 1/ 2<br>Relay/Relay<br>Triac/Triac||1<br>5|
|C<br>Serial<br>None<br>comms<br>RS485||0<br>5|
|D<br>Options<br>None<br>Valve drive output<br>Analogue output + remote setpoint||0<br>2<br>5|
|E<br>Special<br>None<br>functions<br>Start-up + timer functions<br>8 segment programmer||0<br>2<br>3|
|**STANDARD ITEMS**|||
|**Voltage**<br>**Output 1/2**<br>**Comms/options**|**Part Number**||
|100-240Vac<br>Relay/relay<br>None|X3-3100-0000||
|100-240Vac<br>Relay/relay<br>Start-up/timer<br>100-240Vac<br>Relay/relay<br>RS485 comms|X3-3100-2000<br>X3-3150-0000||
|24Vac/dc<br>Relay/relay<br>None<br>24Vac/dc<br>Relay/relay<br>RS485 comms|X3-5100-0000<br>X3-5150-0000||



Current : 0/4-20mA { Configurable in engineering units Voltage : 0/10 - 50mV { mA, mV, V, bar, psi, rH, ph Accuracy : +/- 0.25% of scale range +/- 1 digit (RTD & t/c) +/- 0.1% of scale range (mA & mV) 

## **STANDARD ITEMS** 

Operating modes : 1 PID or on/off loop with 2 or 3 alarms 2 PID or on/off double action loops with 1 or 2 alarms Output 1 : SPST N.O. relay 2A/250Vac resistive or Triac 1A/250Vac resistive Output 2 : SPST N.O. relay 2A/250Vac resistive or Triac 1A /250Vac resistive Output 3 : SPDT N.O.Relay 2A/250Vac resistive Output 4 : SSR drive 0-5Vdc +/-10%, 30mA max, non isolated Output 5 : Analogue control output (optional) 

For suitable input sensors see page 26. 

**25**