TAC-06-683

**Ordering information** 

**Three phase input type(1-stage filter)** 

## **TAC series(4-30A)** 

## **TAC -10 -683 -** O 

**==> picture [497 x 180] intentionally omitted <==**

**----- Start of picture text -----**<br>
1  2  3  4<br>1  Model Name<br>R 2  Rated Current<br>3  Line to ground capacitor code:See table 1.1.<br>table1.1  Line to ground capacitor code<br>RoHS —_— Sa Line to ground<br>e Sw fT Code Leakage Current capacitor<br>(Input 250/500V 60Hz)<br>(nominal value)<br>683 2.5mA/5.0mA max 68000pF<br>4  Options<br>D :DIN rail installation type<br>* The dimensions change when the option is set.<br>Refer to External view.<br>The terminal cover is retracted inside the unit DIN rail installation type is option<br>**----- End of picture text -----**<br>


## **Features of TAC series** 

## **High-attenuation type of common mode noise from 150kHz to 1MHz** 

- **Three Phase 500 VAC** 

- **Push down type terminal block** 

## **Specifications** 

|**No.**|**Items**<br>~~a~~|**TAC-04-683**|**TAC-06-683**|**TAC-10-683**|**TAC-20-683**|**TAC-30-683**|
|---|---|---|---|---|---|---|
|**1**<br>~~a~~|**Rated Voltage[V]**<br>~~Pe~~<br>~~a~~|AC Three Phase 500  50/60Hz<br>~~(~~|||||
|**2**<br>~~a~~|**Rated Current[A]**<br>~~Pe~~<br>~~a~~|4|6<br>~~(~~|10<br>~~(~~|20|30|
|**3**<br>~~a~~|**Test Voltage (Terminal-Mounting Plate)**<br>~~a~~<br>~~Pe~~|2,000 VAC(Cutoff Current = 100mA), 1minute at room temperature and humidity<br>~~(~~|||||
|**4**|**Isolation Resistance(Terminal-Mounting Plate)**<br>~~PO~~|500 VDC 100MWmin at room temperature and humidity|||||
|**5**|**Leakage current 250/500V 60Hz**<br>~~Pe~~|2.5mA/5.0mA max|||||
|**6**|**Voltage drop**<br>~~Pe~~|1.5V max||1.0V max|||
|**7**|**Safety agency approval temperatures**<br>~~Pe~~|-25 to +85C (Refer to DeratingCurve)|||||
|**8**|**Operating temperature**<br>~~PO~~|-40 to +85C (Refer to DeratingCurve)|||||
|**9**|**Operating humidity**<br>~~Pe~~|20 to 95%RH(Non condensing)|||||
|**10**|**Storage temperature/humidity**<br>~~Pe~~<br>~~PO~~|-40 to +85C/20 to 95%RH(Non condensing)|||||
|**11**|**Vibration**<br>~~Pe~~|10 to 55Hz, 19.6m/s2(2G), 3min. Period, 1hour each X, Y and Z axis|||||
|**12**|**Impact**<br>~~PO~~|196.1m/s2(20G), 11ms Once each X, Y and Z axis|||||
|**13**<br>~~fC~~|**Safety agency approvals**<br>~~Pe~~<br>~~fC~~|UL1283, CSA C22.2 No.8(C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC|||||
|**14**<br>~~fC~~|**Case size(withoutprojection) /Weight**<br>~~Pe~~<br>~~fC~~<br>rrrrrrrrrrr—C—tsS—S—sSzY|63X64X128 mm [2.48X2.52X5.04 inches](WXHXD)/620gmax(Option : -D refer to external view)|||||



## **Circuit Diagram** 

## **Derating Curve** 

**==> picture [205 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
Case<br>LINE123 33! ; 33| 456LOAD<br>| |<br>: Oy CY Je<br>CY<br>**----- End of picture text -----**<br>


**==> picture [189 x 97] intentionally omitted <==**

**----- Start of picture text -----**<br>
10080 TLRTNLLL,ee<br>60<br>40 TEEPE TNE<br>20 es eeee<br>0<br>-40 Te -30 -20 40 LN 50 60 70 80 90<br>Ambient Temperature [C]<br>Load Factor [%]<br>**----- End of picture text -----**<br>


CY : Line to ground capacitor : Mounting Plate 

**NF-58** 

## **TAH,TAC series(4-30A)** 

## **External view** 

**As this product is adopted push-down type terminal block, this appearance is as follows.** 

1 **The terminal cover is retracted inside the unit.** 

2 **The screws for connecting the terminals are held in the up right position.** 

**==> picture [502 x 246] intentionally omitted <==**

**----- Start of picture text -----**<br>
Standard Type<br>128 Mounting Plate<br>[5.04] (2.5) 50<br>Input  118[4.65] ± [0.5] Protection Earth [0.1] [1.97] 20<br>Terminal 83.5 [0.79]<br>[3.29]<br>Output<br>Terminal<br>Name Plate<br>Output<br>Input  Terminal<br>Terminal<br>Output<br>Terminal<br>7-M4 Terminal cover 4-f5.5<br>Terminal cover [0.22] Mounting Hole<br>¶ Closed the terminal cover<br>¶ Tolerance : ±1 [±0.04]<br>¶ Weight : 620g max<br>¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]<br>¶ Case : PBT<br>¶ Dimensions in mm, [    ]=inches<br>¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max<br>19 [0.75] 0.5<br>12 [0.47]  ±50 [1.97]<br>63 [2.48]<br>(2) [0.08]<br>64 [2.52]<br>**----- End of picture text -----**<br>


## **DIN rail installation Type** 

**==> picture [489 x 228] intentionally omitted <==**

**----- Start of picture text -----**<br>
108 10 (11) Mounting Plate (2.5) 50<br>Input  [4.25] [0.39] [0.43] [0.1] [1.97]<br>Terminal 83.5 20<br>[3.29] Protection Earth [0.79]<br>Output<br>Terminal<br>Name Plate<br>Output<br>Terminal<br>Input<br>Terminal<br>Output<br>Terminal<br>7-M4 Terminal cover<br>Terminal cover<br>¶ Closed the terminal cover<br>¶ Tolerance : ±1 [±0.04]<br>¶ Weight : 620g max<br>¶ Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]<br>¶ Case : PBT<br>¶ Dimensions in mm, [    ]=inches<br>¶ Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max<br>DIN rail<br>19 [0.75]<br>12 [0.47] 63 [2.48]<br>(2) [0.08]<br>64 [2.52]<br>(9) [0.35]<br>7 [0.28]<br>**----- End of picture text -----**<br>


## ¡ **Note when installing the EMI/EMC Filter on a DIN rail.** 

**When the EMI/EMC Filter is grounded through the DIN rail, the proper noise attenuation may not be achieved.** 

**Be sure to connect the protection earth (PE) of the EMI/EMC Filter body to the earth.** 

**==> picture [152 x 93] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIN rail<br>Name Plate<br>**----- End of picture text -----**<br>


**NF-60**