Image not available
Illustrative purposes only
T92P7D22-12
Power Relay, DPST-NO, 12 VDC, 30 A, T92 Series, Panel Mount, Non Latching
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: TE CONNECTIVITY - POTTER&BRUMFIELD
- Product type: Power Relays
- Contact Configuration:DPST-NO; Coil Voltage:12VDC; Contact Current:30A; Product Range:T92 Series; Relay Mounting:Panel; Coil Type:Non Latching; Contact Voltage VAC:277VAC; Relay Termin
- SVHC: Cadmium oxide (25-Jun-2025)
- Coil Type: Non Latching
- Coil Voltage: 12VDC
- Product Range: T92 Series
- Relay Mounting: Panel Mount
- Coil Resistance: 86ohm
- Contact Current: 30A
- Relay Terminals: Quick Connect
- Contact Material: Silver Cadmium Oxide
- Contact Voltage VAC: 277V
- Contact Voltage VDC: -
- Approvals & Standards: CSA, UL, VDE
- Contact Configuration: DPST-NO
| Delivery and price | |
|---|---|
| Units per pack | 1020 |
| Price | 10.48 € |
| Current stock | 10+ |
| Lead time | 30 days |
General Purpose High Power PCB Relays **Potter & Brumfield** ## **T92 Series Two-pole Power Relay** ## n **30/40/50A switching capability** - n **Designed to control compressor loads to 3.5 tons, 110LRA / 25.3FLA** - n **Meets requirements of UL 508 and UL 873 spacings - 8mm through air, 9.5mm over surface** - n **Meets requirements of VDE 8mm spacing, 4kV dielectric coil-tocontact** - n **Meets requirements of UL Class F construction** - n **UL approved for 600VAC switching (1.5HP)** - n **Screw terminal version (consult factory for availability, ratings)** - n **Anti-explosive version available (Meets EN 60079-15)** - n **WG version available (Meets EN 60335-1)** ## Typical applications HVAC, residential / commercial appliances, industrial controls, charging |~~**Approvals**~~|||||**Contact ratings**1)**(T92 Type) (continued)**|**Contact ratings**1)**(T92 Type) (continued)**|**Contact ratings**1)**(T92 Type) (continued)**|**Contact ratings**1)**(T92 Type) (continued)**|**Contact ratings**1)**(T92 Type) (continued)**|| |---|---|---|---|---|---|---|---|---|---|---| |UL E22575; CSA LR48471; VDE 40019600; TUV R 50083843 0008;|||||Type|||Load||Cycles| |TUV 15090924 002; TUV 15090883 001|||||AgSnOInO|||||| |Technical data of approved types on request.|||||NO|||40A, 240VAC, resistive 85°C||50x103| ||||||NO|||30A, 277VAC, resistive (DC coil only)||250x103| |~~**Contact Data**~~|||||NO|||30A, 277VAC, resistive (AC coil only)||100x103| |Type||T92||T92H|NO|||20A, 506VAC, resistive||100x103| |Contact arrangement<br> 2 form A (NO) 2 form A (NO)||||2 form A (NO) 2 form A (NO)|NO|||1.5HP, 120VAC, 2 pole making/breaking (Fig.1)||1.5HP, 120VAC, 2 pole making/breaking (Fig.1)<br>100x103| ||2 form C (CO)||||NO|||3HP, 240VAC, 3 phase (DC coil only)||100x103| |Rated voltage|||277VAC||NO|||3HP, 480VAC, 3 phase (DC coil only)||100x103| |Max. switching voltage|||600VAC||NO|||2HP, 600VAC, 3 phase (DC coil only)||100x103| |Rated current 30A/40A NO; 3A NC 50A NO|Rated current 30A/40A NO; 3A NC 50A NO||Rated current 30A/40A NO; 3A NC 50A NO|Rated current 30A/40A NO; 3A NC 50A NO|Special Ag Alloy X (Cd Free), wash tight||||Special Ag Alloy X (Cd Free), wash tight|| |Overload current*60A NO; 4.5A NC 75A NO||60A NO; 4.5A NC 75A NO||60A NO; 4.5A NC 75A NO|NO|||30A, 250VAC, resistive 100x10||30A, 250VAC, resistive 100x103| |Contact material|Contact material||Ag Alloy||NO|||30A, 400VAC, resistive 100x10||30A, 400VAC, resistive 100x103| |Min. recommended contact load<br>500mA (NO), 12VAC or 5VDC|||||NO|||20A, 480VAC, resistive 100x10||20A, 480VAC, resistive 100x103| ||100mA (NC), 12VAC or 5VDC||||**VDE**|||||| |Frequency of operation, with load<br>360 cycles per hour||360 cycles per hour|||AgCdO, flange mount relays|||AgCdO, flange mount relays||| |Operate/release time max.,|Operate/release time max.,||||NO|||20A, 400VAC||100x103| |including bounce|||25/25ms||NC|||3A, 400VAC||30x103| |Initial contact resistance||< 100 mΩ at 6VDC 1A|||CO|||20A NO / 3A NC, 400VAC||30x103| |*Note: Minimum electrical endurance 50 cycles|*Note: Minimum electrical endurance 50 cycles||||AgCdO, PC mount relays|AgCdO, PC mount relays||||| ||||||NO|||30A, 400VAC||100x103| ||||||NC|||3A, 400VAC||30x103| |**Contact ratings1) (T92H Type)**|||||CO|||30A NO / 3A NC, 400VAC||30x103| |**UL508**|||||Anti-explosion, sealed type|||Anti-explosion, sealed type||| |NO 50A, 277VAC, resistive, 85°C|NO 50A, 277VAC, resistive, 85°C|||6x103|NO 30A 250VAC, 25°C|NO 30A 250VAC, 25°C|NO 30A 250VAC, 25°C|NO 30A 250VAC, 25°C|NO 30A 250VAC, 25°C|100x103| |Note: Coil voltage 12-48VDC covered in UL approval|||||Anti-explosion, break device|||Anti-explosion, break device||| ||||||NO 15A 480VAC|NO 15A 480VAC|NO 15A 480VAC|NO 15A 480VAC|NO 15A 480VAC|100x103| ||||||ARI 780-86 Endurance Test (section 6.6):|ARI 780-86 Endurance Test (section 6.6):||||| |**Contact ratings**1)**(T92 Type)**|||||HVAC Definite Purpose Contactor Standard|||HVAC Definite Purpose Contactor Standard||| |Type|Load|||Cycles|Normally Open Contacts|||||| |**UL508**|||||Single Phase/Two Pole (Both poles together switching a single load)|||||Single Phase/Two Pole (Both poles together switching a single load)| |AgCdO|||||110 LRA, 25.3 FLA, 200K operations (DC Coil)|||||| |NO|40A, 277VAC, resistive|||6x103||||L1<br>L2||| |NO|30A, 277VAC, resistive (DC coil only)||30A, 277VAC, resistive (DC coil only)|30A, 277VAC, resistive (DC coil only)<br>250×103||||||| |NO<br>NO|30A, 277VAC, resistive (AC coil only)<br>10A, 600VAC, resistive||30A, 277VAC, resistive (AC coil only)|100×103<br>250x103|Figure 1|T1|||T2|| |NO|1HP, 120VAC|||100x103|Single Phase Per Pole (Single load per pole)||Single Phase Per Pole (Single load per pole)|||| |NO|3HP, 240VAC|||1x103|110 LRA, 18 FLA, 200K operations (DC Coil).|110 LRA, 18 FLA, 200K operations (DC Coil).||110 LRA, 18 FLA, 200K operations (DC Coil).||| |NO|1.5HP, 480 or 600VAC|||100x103|60 LRA, 14 FLA, 200K operations (AC Coil).|||||| |NO<br>NO<br>NO|110LRA/25.3FLA, 240VAC<br>7.3A, 240VAC, pilot duty<br>20A, 28VDC, resistive|||100x103<br>100x103<br>100x103|Figure 2|||L1<br>L2<br>T1<br>T2||| |NO|TV10, 120VAC|||25x103||||||| |NC|3A, 277VAC|||100x103||||||| |NC|2A, 480VAC, general purpose|||100x103|1) Contact ratings at 25°C (unless otherwise noted) with relay properly vented.|||||| |NC|1A, 600VAC|||100x103|FLA, LRA ratings are compatible with 3.5 ton compressor applications.|||||| ||||||Mechanical endurance|||||| ||||||T92||||10x106ops.|| ||||||T92H|||||1x106ops| Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions 1 Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. 04-2021, Rev. 0421 www.te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company. General Purpose High Power PCB Relays **Potter & Brumfield** ## **T92 Series Two-pole Power Relay** (Continued) **==> picture [524 x 416] intentionally omitted <==** **----- Start of picture text -----**<br> ||||||||||||||||||||| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |Coil Data|Coil Data|(continued)| |Coil voltage range|5 to 110VDC; 12 to 240VAC| |Sn|Max. coil power|1.7W; 4.0VA|120|Pot|||fT|fy|yt|ft| |Max. coil temperature|155°C|100|||See| |Coil insulation system according UL|Class F| |80| |SSS|Coil versions, DC coil (D type)|60|Pfeeee4}—}—}|SPEee|Nehe|eeee|eeeeee| |Coil|Rated|Operate|Release|Coil|Rated coil|eeeS|Ne|ee|ee| |code|voltage|[2)]|voltage|[3)]|voltage|resistance|power|40|PoP| |a|SS| |ee|5 5 3.75 VDC|VDC|VDC 0.6|Ω±10% 14.9|W|20|a|eeee|ee|ee|ee|ee|eee| |Po|eee|eee| |6|6|4.5|0.6|22|0|eee| |9 9 6.75|0.9|48|70|75|80|85|90|95|100|105|110|115|120|125|130|135|140|145|150| |Applied Coil Voltage (% of Rated Nominal)| |12|12|9|1.2|86| |18|18|13.5|1.8|197|1.7W/|Note: This chart only apply for T92 standard type. For coil data of T92 Anti-| |22|22|16.5|2.2 294 Min. 0.41W|explosion sealed type and T92H type, please contact TE engineering.| |24|24 18|2.4|350|hold| |36|36 27|3.6|767| |48|48 36|4.8|1390| |110 110 82.5 11|7255|Insulation Data| |120 120 90 12|8514|Initial dielectric strength| |2) For T92H type, after the energization time of 100ms with rated voltage, the coil|between open contacts|1500Vrms| |requires a reduction of the coil voltage to 50% of rated voltage.|between contact and coil|4000Vrms| |3) For Anti-explosion sealed type, the operate voltage is 80% of the rated coil|between adjacent contact|2000Vrms| |voltage.|Initial surge withstand voltage| |between contact and coil|8kV| |Coil versions, AC coil (A type)|Initial insulation resistance (@500VDC)| |Coil|Rated|Frequency Operate|Release|Coil|Rated coil|between insulated elements|1x10|[9]|Ω| |code voltage|voltage|voltage resistance|power|Clearance/creepage| |VAC|Hz|VAC, 60Hz VAC, 60Hz Ω±10%|VA|between contact and coil|8mm clearance/9.5mm creepage| |12|12 60 9.6 1.2|9.1|4| |24|24 60 19.2 2.4|36.6|4| |110|110|60|88 11|793|4|Other Data| |120|110/120|50/60|96 12|950|4|Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content| |208|208|60|166.4|20.8|2841|4|refer to the Product Compliance Support Center at| |240|220/240|50/60|192 24|3800|4|www.te.com/customersupport/rohssupportcenter| |277|250/277 50/60 221.6|27.7|5485|4|Ambient temperature| |Coil versions, AC coil (F type)|DC coil|-55ºC to 85ºC| |Coil|Rated|Frequency Operate|Release|Coil|Rated coil|AC coil|-55ºC to 65ºC| |code voltage|voltage|voltage resistance|power|Category of environmental protection| |VAC|Hz|VAC, 60Hz VAC, 60Hz Ω±10%|VA|IEC 61810|RTI - dust protected,| |12|12 50 9.6|1.2|11.2|3.5|RTII - fux proof, RTIII - wash tight| |24|24 50 19.2|2.4|44.4|3.5|Vibration resistance (functional)|1.65mm max amplitude, 10-55 Hz| |48|48 50 38.4|4.8|179.2|3.5|Shock resistance (functional)|10G for 11msec| |240|240|50 192 24|4355|3.5|Shock resistance (destructive)|100G| |All figures are given for coil without preenergization, at ambient temperature +23°C.|Terminal type|PCB / Quick Connect / Screw| **----- End of picture text -----**<br> All figures are given for coil without preenergization, at ambient temperature +23°C. For A type, 110V/120V, 50/60Hz. Signify 50Hz Operation at Nominal 110V, 60 Hz Operation at Nominal 120V. 2 04-2021, Rev. 0421 Catalog and product specification according www.te.com to IEC 61810-1 and to be used only together © 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. a TE Connectivity Ltd. company. Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions General Purpose High Power PCB Relays **Potter & Brumfield** ## **T92 Series Two-pole Power Relay** (Continued) ## **Dimensions** **==> picture [523 x 206] intentionally omitted <==** **----- Start of picture text -----**<br> T92/T92H – Mounting and termination code 1 T92 – Mounting and termination code 2, 3 and 4<br>2.06 MAX. 1.36 MAX. 2.700 MAX. 1.36 MAX.<br>(52.32) (34.54) (68.58) (34.54)<br>2 —S eS —— = =_=<br>1.21 MAX. 1.04 MAX. 1.495 MAX.<br>(30.73) .156 ± 0.012 (26.42) (37.97)<br>(3.96 ± 0.3)<br>.250 TYP.<br>1.618 ± .020 (6.35)<br>.585 ± .005 (41.10 ± .51) .047 TYP. 2.05 MAX.<br>(14.86 ± .13) .309 ± .005(7.85 ± .13) .032 TYP.(0.81) (1.19)Pre-soldering 2.345 ± .005(59.56 ± .13) (52.07)<br>in below side 1.618 TYP.<br>.585 ± .005 (41.10 ± .51)<br>(14.86 ± .13) .309 ± .005<br>1.000 ± .010<br>.630 ± .005 (7.85 ± .13)<br>(16.00 ± .13) (25.40 ± .25) .090 RAD.<br>(2.29)<br>FOR #8 SCREW<br>.630 TYP.<br>(16.00)<br>**----- End of picture text -----**<br> Note: Dimensions of the pins after tin soldering a) +0.3mm for the width and the thickness b) +1.0mm for the length ## T92 – Mounting and termination code 5 **==> picture [239 x 403] intentionally omitted <==** **----- Start of picture text -----**<br> 2.700 MAX.<br>(68.58)<br>1.36 MAX.<br>(34.54)<br>.090 (2.29)<br>RAD. FOR<br>#8 SCREW<br>2.345 ± .005<br>(59.56 ± .13)<br>2.135 MAX. 1.431 MAX.<br>(54.23) (36.34)<br>2.010 MAX.<br>(51.05)<br>.913 MAX.<br>(23.19)<br>' |<br>Terminal assignment<br>Bottom view on pins<br>2 form A 2 form C<br>0 0<br>2 4 2 4 3<br>6 8 6 8 7<br>1 ( 1 : (| 1 :<br>It a u<br>04-2021, Rev. 0421 Catalog and product specification according<br>www.te.com to IEC 61810-1 and to be used only together<br>© 2012 Tyco Electronics Corporation, with the ‘Definitions’ section.<br>a TE Connectivity Ltd. company.<br>**----- End of picture text -----**<br> Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. **PCB layout** Bottom view on pins T92/T92H - Mounting and termination code 1 **==> picture [253 x 188] intentionally omitted <==** **----- Start of picture text -----**<br> 1.618<br>(41.10)<br>.585<br>.309 (14.86) .185<br>(7.85) (4.70)<br>.365<br>(9.27)<br>.630 1.000<br>(16.00) (25.40)<br>.203 TYP.<br>(5.16) .052 TYP. .072 TYP.<br>(1.32)<br>.162 (1.83)<br>(4.12)<br>An alternate PC board layout utilizes .076 ± .003 (1.93 ± .076) diameter holes on the same<br>center-to-center spacing shown above. Use of the rectangular holes is recommended for<br>improved solderability.<br>**----- End of picture text -----**<br> Only necessary terminals are present on single throw models. Consequently, some holes will be unnecessary for single throw models. 3 Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions **Potter & Brumfield T92 Series Two-pole Power Relay** (Continued) **Product code structure (T92H type)** Typical product code **T92H P 7 D 1 X -12 Type T92H** Power relay T92 High Performance (50A) **Enclosure P** Dust protected plastic case **S** Wash-tight, tape sealed, plastic case (Mounting and termination code 1) **Contact arrangement 7** 2 form A (2 NO) **Coil Input D** DC voltage **Mounting and termination 1** Printed circuit board mount; printed circuit board terminals. **Contact material X** Special Ag Alloy X (Cd Free) **Coil voltage** Coil code: please refer to coil versions table **Product code Enclosure Contacts Coil Mounting Contact Material Coil Part number** T92HP7D1X-12 Plastic dust cover 2 form A, 2 NO DC PCB terminals Special Ag Alloy X (Cd Free) 12VDC 6-1423008-6 T92HP7D1X-24 24VDC 6-1423008-7 T92HP7D1X-48 48VDC 6-1423008-9 Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request. **Product code structure (T92 type) Product code structure** Typical product code **T92 S 11 D 2 2 -24 -99 Type T92** Printed circuit board / panel mount power relay T92 **Enclosure P** Dust protected plastic case **S** Wash-tight, tape sealed, plastic case (Mounting and termination code 1) Wash-tight, glue sealed, plastic case (Mounting and termination code 1, 2 for anti-explosion version) Top sealed, not wash-tight, not tape sealed on bottom (Mounting and termination codes 2, 3 & 4) **Contact arrangement 7** 2 form A (2 NO) **11** 2 form C (2 CO) **Coil Input A** AC voltage, 60Hz or 50/60 Hz (consult coil versions table) **D** DC voltage **F** AC voltage, 50Hz **Mounting and termination 1** Printed circuit board mount; printed circuit board terminals. **2** Panel mount via flanged cover; .250” (6.35mm) x .032” (.81mm) QC terminal **3** Panel mount via flanged cover; .187” (4.75mm) x .032” (.81mm) QC terminals for coil and .250” (6.35mm) for contacts **4** Panel mount via flanged cover, .187” (4.75mm) x .020” (.51mm) QC terminals for coil and .250” (6.35mm) for contacts. **5** Panel mount via flanged cover, M4 screws w/ captive pressure plates. Requires Enclosure P and Contact arrangement 7. **Contact material 2** AgCdO **4** AgSnOInO **X** Special Ag Alloy X (Cd Free) **Coil voltage** ~~**=**~~ Coil code: please refer to coil versions table **Customer code -99** Anti-explosion **-00** WG version ~~r~~ 4 04-2021, Rev. 0421 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2012 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions General Purpose High Power PCB Relays **Potter & Brumfield** ## **T92 Series Two-pole Power Relay** (Continued) |T92P7A22-24<br>T92P7A22-120<br>T92P7A22-240<br>T92P7A22-277<br>T92P7A24-240<br>T92P7A52-120<br>T92P7A52-240<br>T92P7D12-12<br>T92P7D14-12<br>T92P7D12-24<br>T92P7D22-12<br>T92P7D22-24<br>T92P7D22-48<br>T92P7D24-12<br>T92P7D24-24<br>T92P7D42-24<br>T92P7D52-12<br>T92P7D52-24<br>T92P11A12-120<br>T92P11A22-12<br>T92P11A22-24<br>T92P11A22-120<br>T92P11A22-240<br>T92P11A22-277<br>T92P11A24-240<br>T92P11A42-120<br>T92P11D12-12<br>T92P11D22-12<br>T92P11D22-24<br>T92P11D24-12<br>T92P11D24-24<br>T92S7A12-24<br>T92S7A12-120<br>T92S7A12-240<br>T92S7A22-24<br>T92S7A22-120<br>T92S7A22-240<br>T92S7D12-12<br>T92S7D12-24<br>T92S7D12-48<br>T92S7D12-110<br>T92S7D14-12<br>T92S7D14-24<br>T92S7D22-12<br>T92S7D22-18<br>T92S7D22-24<br>T92S7D22-110<br>T92S11A12-24<br>T92S11A12-120<br>T92S11A12-240<br>T92S11A22-12<br>T92S11A22-24<br>T92S11A22-120<br>T92S11A22-240<br>T92S11D12-12<br>T92S11D12-24<br>T92S11D12-48<br>T92S11D12-110<br>T92S11D22-12<br>T92S11D22-24<br>T92P7D12-12-99<br>T92S7D1X-12-99<br>T92S7D2X-12-99<br>T92S7A22-240-00<br>T92S7D12-12-00<br>~~oo~~<br>~~|~~<br>~~Po~~|Plastic dust cover|2 form A, 2 NO|AC|Panel mount + quick connect<br>~~—~~|AgCdO<br>~~|~~<br>~~ee~~|24 VAC<br>~~|~~|6-1393211-0<br>5-1393211-7<br>6-1393211-2<br>6-1393211-3<br>3-1423008-3<br>1423008-8<br>1-1423008-2<br>6-1393211-5<br>2-1423008-1<br>6-1393211-6<br>6-1393211-9<br>7-1393211-1<br>7-1393211-2<br>2-1423008-2<br>1423008-9<br>7-1393211-5<br>1-1423008-0<br>1423967-1<br>3-1393211-8<br>3-1393211-9<br>4-1393211-3<br>4-1393211-0<br>4-1393211-4<br>4-1393211-6<br>3-1423008-7<br>4-1393211-8<br>5-1393211-0<br>5-1393211-3<br>5-1393211-4<br>3-1423008-5<br>3-1423008-6<br>9-1393211-8<br>9-1393211-7<br>9-1393211-9<br>1393212-4<br>1393212-2<br>1393212-5<br>1393212-8<br>1-1393212-0<br>1-1393212-1<br>1393212-7<br>1-1423008-6<br>1-1423008-8<br>1-1393212-4<br>1-1393212-5<br>1-1393212-7<br>1-1393212-3<br>8-1393211-1<br>8-1393211-0<br>8-1393211-2<br>8-1393211-3<br>8-1393211-6<br>8-1393211-4<br>8-1393211-7<br>8-1393211-9<br>9-1393211-0<br>9-1393211-1<br>8-1393211-8<br>9-1393211-3<br>9-1393211-4<br>2-2071223-3<br>6-1423008-1<br>6-1423008-2<br>2-2071223-4<br>1-2071223-7<br>~~ee~~<br>~~a~~<br>~~|~~| |---|---|---|---|---|---|---|---| |||||||120VAC<br>~~|~~<br>~~[|~~|| |||||||240VAC<br>~~[|~~<br>~~|~~<br>~~|~~|| |||||||277 VAC<br>~~|~~<br>~~||~~<br>~~eee~~|| ||||||AgSnOInO<br>~~|~~<br>~~ee~~|240VAC<br>~~||~~<br>~~eee~~|| |||||Panel mount + screw terminals<br>~~—~~|AgCdO<br><br>~~ee ~~<br>~~|~~<br>~~|~~|120VAC<br>~~|~~<br> ~~eee~~<br>~~—~~|| |||||||240VAC<br> ~~eee~~<br>~~—~~<br>~~|~~<br>~~|~~|| ||||DC<br>~~Po~~<br>~~Po~~|PCB terminals<br>~~—~~||12 VDC<br> ~~eee~~<br>~~|~~<br>~~|~~<br>~~ee~~<br>~~|~~|| ||||||AgSnOInO<br>~~|~~<br>~~ee~~<br>~~|~~|12 VDC<br>~~|~~<br>~~ee~~<br>~~ee~~<br>~~|~~|| ||||||AgCdO<br>~~ee~~<br>~~|~~<br>~~|~~|24 VDC<br>~~ee~~<br>~~ee~~<br>~~|~~|| |||||Panel mount + quick connect<br>~~Po~~||12VDC<br>~~ee~~<br>~~||~~|| |||||||24 VDC<br>~~|~~<br>~~|~~<br>~~|~~|| |||||||48VDC<br>~~|~~<br>~~|~~|| ||||||AgSnOInO<br>~~|~~<br>~~_——~~|12VDC<br>~~|~~<br>~~_——~~|| |||||||24 VDC<br>~~_——~~|| ||||||AgCdO<br>~~_——~~<br>~~|~~<br>~~|~~<br>~~|||~~||| |||||Panel mount + screw terminals<br>~~Po~~<br>~~Po~~||12 VDC<br>~~_——~~<br>~~—~~<br>~~|~~|| |||||||24 VDC<br>~~_——~~<br>~~—~~<br>~~||~~|| |||2 form C, 2 CO|AC<br>~~Po~~<br>~~Po~~|PCB terminals<br>~~Po~~<br>~~Po~~||120VAC<br>~~_——~~<br>~~||~~<br>~~|~~<br>~~|~~|| |||||Panel mount + quick connect<br>~~Po~~<br>~~oo~~||12 VAC<br>~~|~~<br>~~|~~<br>~~||~~|| |||||||24 VAC<br>~~||~~<br>~~|~~<br>~~|~~|| |||||||120VAC<br>~~|~~<br>~~||~~|| |||||||240VAC<br>~~|||~~|| |||||||277 VAC<br>~~||~~<br>~~ee~~|| ||||||AgSnOInO<br>~~|~~<br>~~ee~~|240VAC<br>~~|~~<br>~~ee~~<br>~~ee~~|| ||||||AgCdO<br>~~ee~~<br>~~|~~|120VAC<br>~~ee~~<br>~~ee|~~|| ||||DC|PCB terminals<br>~~oo~~||12 VDC<br>~~|~~<br>~~|~~<br>~~|~~|| |||||Panel mount + quick connect<br>~~oo~~|||| |||||||24 VDC<br>~~|~~<br>~~|~~|| ||||||AgSnOInO<br>~~|~~<br>~~Ss~~<br>~~||~~|12 VDC<br>~~|~~<br>~~s~~<br>~~|~~|| |||||||24 VDC<br>~~s~~<br>~~||~~|| ||Wash tight|2 form A, 2 NO|AC|PCB terminals|AgCdO<br>~~Ss~~<br>~~||~~<br>~~|~~<br>~~||||||~~|24 VAC<br>~~s~~<br>~~|||~~|| |||||||120VAC<br>~~||~~<br>~~|~~<br>~~|~~|| |||||||240VAC<br>~~|~~<br>~~|~~|| ||Top sealed|||Panel mount + quick connect||24 VAC<br>~~||~~<br>~~|~~|| |||||||120VAC<br>~~||~~|| |||||||240VAC<br>~~|||~~|| ||Wash tight||DC|PCB terminals||12 VDC<br>~~|||~~|| |||||||24 VDC<br>~~|||~~|| |||||||48VDC<br>~~|||~~|| |||||||110VDC<br>~~||~~|| ||||||AgSnOInO<br>~~|~~<br>~~——~~<br>~~||~~|12 VDC<br>~~|~~<br>~~—~~<br>~~|~~|| |||||||24 VDC<br>~~—~~<br>~~||~~|| ||Top sealed|||Panel mount + quick connect|AgCdO<br>~~——~~<br>~~||~~<br>~~|~~<br>~~|~~<br>~~||||~~<br>~~||~~<br>~~|~~<br>~~|~~|12 VDC<br>~~—~~<br>~~|||~~|| |||||||18VDC<br>~~||~~<br>~~|~~<br>~~|~~|| |||||||24 VDC<br>~~|~~<br>~~||~~|| |||||||110VDC<br>~~||~~<br>~~|~~<br>~~|~~|| ||Wash tight|2 form C, 2 CO|AC|PCB terminals||24 VAC<br>~~|~~|| |||||||120VAC<br>~~||~~<br>~~|~~|| |||||||240VAC<br>~~||~~|| ||Top sealed|||Panel mount + quick connect||12 VAC<br>~~|||~~|| |||||||24 VAC<br>~~|||~~|| |||||||120VAC<br>~~||~~|| |||||||240 VAC<br>~~|[|~~|| ||Wash tight<br>~~oo~~||DC<br>~~Po~~|PCB terminals<br>~~Po~~||12 VDC<br>~~[|~~<br>~~|~~<br>~~|~~|| |||||||24 VDC<br>~~||~~|| |||||||48VDC<br>~~||~~<br>~~|~~|| |||||||110VDC<br>~~|~~<br>~~|~~<br>~~—~~|| ||Top sealed<br>~~oo~~<br>~~|~~|||Panel mount + quick connect<br>~~Po~~||12 VDC<br>~~|~~<br>~~—~~<br>~~|~~|| |||||||24 VDC<br>~~|~~<br>~~—~~<br>~~||~~|| ||Plastic dustcover<br>~~oo~~<br>~~|~~<br>~~—~~|2 form A, 2 NO<br>~~a~~|DC<br>~~Po~~|PCB terminals<br>~~Po~~<br>~~PH~~<br>~~——~~|AgCdO<br>~~|~~<br>~~|~~<br>~~PH~~|12VDC<br>~~|~~<br>~~—~~<br>~~||~~<br>~~PH~~|| ||Wash tight<br>~~|~~<br>~~—~~||||Special Ag Alloy<br>X(CdFree)<br><br>~~PH~~<br>~~**—**—~~|12VDC<br>~~|~~<br>~~PH~~<br>~~—~~|| |||||Panel mount + quick connect<br>~~PH~~<br>~~——~~<br>||12VDC<br>~~PH~~<br>~~—~~<br>~~—~~|| ||Top Sealed(WG)<br>~~—~~<br>~~Po~~||AC<br>||AgCdO<br>~~PH~~<br>~~**—**—~~<br>~~a~~|240VAC<br>~~PH~~<br>~~—~~<br>~~—~~<br>|| ||Wash tight(WG)<br>~~Po~~||DC<br>~~a~~|PCB terminals<br>~~——~~<br>~~a~~||12VDC<br>~~—~~<br>~~a~~<br>~~|~~|| Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request. 5 Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, terms of the disclaimer and all chapters of application notes and all specifications are the ‘Definitions’ section, available at subject to change. http://relays.te.com/definitions 04-2021, Rev. 0421 www.te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company.
Updated at April 13, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →