T1A2240120P-36DE

**T1A2240120P-36DE** 

**Constant current DALI-2 DT6 LED Driver (PUS-DIM + PUSH CCT + CLO + NFC)** 

## **FEATURES** 

- Supports DALI-2 + PUSH DIM + PUSH CCT Control + NFC 

## **INTERFACE** 

   - DALI-2 DT8 

   - PUSH-DIM 

- Inbuilt CLO Function 

- PUSH-CCT 

- Compliance to DALI-2 PART 101, 102, 207, 209, 250, 251, 252, 253 

## **FUNCTIONS** 

- DALI Function setting through NFC 

- a. O/P Current setting in step of 1mA. 

- b. Set Min-Max level. 

- c. Set system failure level. 

- d. Set power on level. 

   - Memory function 

   - Suitable for emergency lighting (EL) 

   - Protection features 

   - (short circuit, open circuit, over load, no load, hot plug-in) 

- e. Set address manually 0 to 63. 

- f. Create Groups manually 1 to 16. 

- g. Set Fade time. 

## **SUITABLE FOR LIGHTS** 

- h. Set fade rate. 

- i. change dimming curve manually Linear OR Logarithmic. 

- j. Set Scenes manually. 

- Suitable for Linear lights, tri-proof lights, working lights and other linear or ultra thin lights. 

- SELV CLASS II Design. 

## TYPICAL APPLICATIONS 

- Dimming range 0.1% to 100%. 

   - LED Indoor lighting. 

- High PF, Low THD, High Efficiency. 

   - LED Office lighting. 

   - LED Commercial lighting. 

- CE, Flicker free. 

- Life 50,000hrs. 

- Suitable for indoor use only. 

**REV A Page - 1 of 4 RD-FR-032 / Rev.00** 

**FLICKER FREE** 

SELV 

**T1A2240120P-36DE** 

**==> picture [179 x 42] intentionally omitted <==**

- **Dimmable Constant urrent -Channel LED C 2 river with DALI DTD 8** 

- **• Support DALI dimming and tunable white function** 

- **Dimming range 0.1 to 100%** 

- **• NFC Programable • DALI PART 101, 102, 207, 209, 251, 252 & 253** 

- **Inbuilt CLO Function Application** 

- **• Output Wattage : 36W Max • - LED indoor lighting • Output voltage range of 10-42Vdc - LED office lighting • Output Current: 600 - 1200mA - LED architectural lighting • Flicker-free at any brightness,meeting - LED panel lamp lighting the standard of flicker-free(IEEE 1789-2015)** 

## **General Specifications** 

**==> picture [554 x 476] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Input Voltage  240VAC +10%, 50/60Hz<br>Operating Input Voltage Range 196-264VAC, 50/60Hz<br>Input Current Max.  0.30 @ 230Vac<br>Input Power  43W<br>Power Factor  >0.95 @ 230Vac Full Load<br>THD  <10% @ 230Vac Full Load<br>Efficiency (Typical)  85%<br>Driver Type Constant Current DALI-2<br>Output Current 600mA to 1200mA ±3% (Current setting through NFC, with step of 0.1mA)<br>*Refer  Voltage vs O/P current graph<br>Output Voltage angeR 10-42Vdc<br>Dimming Controller Type DALI-2 (Amplitude/CCR dimming)<br>Output Power 36W<br>Number of Output Channels 2 Channel<br>Output Type Class II<br>Ambient Operating Temperature Range -20°C to 60°C<br>Max. Case Temperature  85°C<br>Input Surge Protection 2KV<br>Protections Input Over Current        :  Non Resettable (Fuse)<br>Output Short Circuit      : Auto Recovery (HICCUP Mode)<br>Output Open Circuit      : Auto Recovery (HICCUP Mode)<br>Output Overload           :  YES<br>Over Temperature        : Auto Recovery (HICCUP Mode)<br>Standards EN55015, EN61000-3-2, EN61000-3-3<br>EN61547, EN61000-4-2,3,4,5,6,8,11<br>EN61347-1, EN61347-2-13<br>IEEE1789<br>Withstand Voltage I/P-O/P:3750Vac, I/P-FG:1750Vac, O/P-FG:500Vac, I/P-DALI:500Vac<br>Leakage Current  <0.5mA @ 240Vac<br>Isolation resistance I/P-O/P:100MΩ / 500Vdc / 25°C / 70% RH<br>Life 50,000 ours @ H 75°C<br>Approvals / Class  SELV Equivalent<br>Warranty 5 Years at Tc 75°C<br>Weight 0.310 Kg<br>**----- End of picture text -----**<br>


## Note : Suitable for indoor applica�on only 

**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 75°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page - 2 of 4** 

**RD-FR-032 / Rev.00** 

## **T1A2** SPECIFICATIONS **240120P-36DE** SELV C€ ~~coat X~~ **FREEFLICKER** 

Note: Suitable with 3 or 4-Wire CCT LED luminaries as well. 

Note: Suitable with 3 or 4-Wire CCT LED luminaries as well. 

## **Using PUSH DIM & PUSH CCT controls:** 

After installation according to the wiring  diagram of PUSH-DIM control application, 

1. Press PUSH switch it will increase the Brightness, release the witch and again press PUSH  switch it will Reduce the Brightness. 

2. Short press PUSH switch two times to switch to PUSH CCT mode. 

3. Press PUSH switch it will increase the CCT, release the witch and again press PUSH switch it will Reduce the CCT. 

4 To go back to PUSH-DIM Short press PUSH switch two times. 

**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 75°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page -  of 3 4 RD-FR-032 / Rev.00** 

SELV **FREEFLICKER** ~~ake~~ 

## **T1A2240120P-36DE** SPECIFICATIONS 

## **Mechanical Data :** 

## **Note : All Dimensions are in mm.** 

**Tolerance=±0.5mm** 

## **Packaging** 

## **Master carton** 

**==> picture [131 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
OUTER DIMENSION<br>L W H<br>450mm 350mm 180mm<br>Net Gross<br>Weight Weight QUANTITY<br>7.2 kg 8.72 kg 32 pc.<br>**----- End of picture text -----**<br>


**Installation Instructions:** Connect Wires as per details given on the Driver Screen. Keep proper ventilation around the LED Driver and do not stack any object on it. Also a 10-15 cm clearance must be kept when the adjacent device  is a heat source. Do not exceed the declared Hot spot temperature(Tc max) under any circumstances. 

**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 75°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page -  of 4 4 RD-FR-032 / Rev.00**