T1A1240165S-60EE

**T1A1240165S-60EE** 

**Constant Current Linear Dimming Driver (DALI 2+pushDIM)** 

## Features 

- DALI-2+pushDIM dimming interface 

- 16-level current output can be realized by DIP-switch 

- - Soft dimming and flicker-free  at any brightness 

> - Using HPC patented technology at any dimming level, the brightness between lights is same 

- Standby power input<0.5W, meets the requirements of ErP certification 

- High PF, high efficiency, low THD 

- Intelligent LED hot-plug protection function 

- SELV and Class I design, suitable for use inside of the light 

- 

- IP20 protection grade, indoor use 

## Interfaces 

- DALI - 2 ( DALI - 2 DT6 ) 

- - PUSH ( pushDIM ) Functions 

- Support central emergency application (dimming normal 

- in DC input) 

- Support self-contained emergency application 

- Protective features 

- (short-circuit, overload,no-load, hot plug - in protection ) 

- Suitable for lights 

- Suitable for linear lights,tri-proof lights,working lights 

- and other linear or ultra-thin lights etc. 

## Typical applications 

   - LED indoor lighting 

   - LED office lighting 

- Nominal life-time up to 100,000 h 

- LED commercial lighting 

**FLICKER FREE** 

**REV A Page - 1 of 6 RD-FR-032 / Rev.00** 

**FLICKER FREE** 

SELV 

**==> picture [179 x 42] intentionally omitted <==**

## **T1A1240165S-60EE** 

- **Dimmable Constant current -Channel LED 1 • Output Wattage : 60W Max • Application driver with DALI Dt6 • Output voltage range of 12-42Vdc - LED indoor lighting** 

- **• Support DALI dimming and tunable white function • Output Current: 90 - 1650mA - LED office lighting •      Support PUSH dimming and tunable white function • Flicker-free at any brightness,meeting - LED architectural lighting • Dimming range 1 to 100% the standard of flicker-free(IEEE 1789-2015)** 

## **General Specifications** 

**==> picture [560 x 484] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rated Input Voltage  200-240VAC,200-240VDC,0/50/60Hz<br>Operating Input Voltage Range 180-264VAC,180-264VDC,0/50/60Hz<br>Input Current  <0.38A (Rated input voltage)<br>Input Power  70.85W<br>Power Factor  PF>0.95 (230V AC & Full load),DF>0.98 (230V AC & Full load)<br>THD  < 10% 230V(  AC & Full Load)<br>Efficiency  (Typical) > 88.5%(230V AC & Full Load)<br>Driver Type Constant Current<br>Output Current 900mA ±3% ,950mA ±3%, 1000mA ±3%, 1050mA ±3%, 1100mA ±3% ,1150mA ±3%  , 1200mA ±3%<br>1250mA ±3% ,1300mA ±3%  , 1350mA ±3%, 1400mA ±3%, 1450mA ±3% ,1500mA ±3%  , @ -6 42V<br>1550mA ±3% @ -6 40V, 1600mA ±3% @ -36 8V, 1650mA ±3% @ -36 6V<br>*Refer  DIP switch Table for O/P current selection<br>Output Voltage Range 6-42VDC<br>No Load Output Volatge 50VDC<br>Output Power 62.7W Max<br>Number of Output Channels 1 Channel<br>Class Class I<br>Dimming Controller Type/Dimming Range DALI 2,1%-100%<br>Ambient Operating Temperature Range -20°C to 60°C<br>Max. Case Temperature  90°C<br>Input Surge Protection L-N:2KV,L-FG/N-FG:2KV<br>Protections Output Short Circuit       : Yes<br>Output Open Circuit       : Yes<br>Output Overload            :  Yes<br>Over Temperature        : Auto Recovery (HICCUP Mode)<br>Safety Standards EN61347-1/2-13, GB19510.1/14, EN62384<br>Flicker-free Standard IEEE1789<br>Dali Standards IEC62386-101, 102, 207<br>Withstand Voltage I/P-O/P:3750Vac, I/P-FG:1750Vac, O/P-FG:500Vac, I/P-DALI:500Vac<br>Leakage Current  <0.7mA @ 240Vac<br>Isolation resistance I/P-O/P:100MΩ / 500Vdc / 25°C / 70% RH<br>Life 50,000 ours @ 82H °C<br>Approvals / Class  SELV Equivalent<br>Warranty 5 Years<br>Weight 0.273 Kg<br>**----- End of picture text -----**<br>


## Note : Suitable for indoor applica�on only 

**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 85°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page - 2 of 6 RD-FR-032 / Rev.00** 

**FLICKER FREE** 

SELV 

**==> picture [179 x 42] intentionally omitted <==**

## **T1A1240165S-60EE** 

## **DIP Switch Chart :** 

**==> picture [243 x 220] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pin Irated Voltage 1 2 3 4<br>42.0W 900mA 42VDC ON ON ON ON<br>44.3W 950mA 42VDC ON ON ON<br>46.7W 1000mA 42VDC ON ON ON<br>49.0W 1050mA 42VDC ON ON<br>51.3W 1100mA 42VDC ON ON ON<br>53.7W 1150mA 42VDC ON ON<br>56.0W 1200mA 42VDC ON ON<br>58.3W 1250mA 42VDC ON<br>60.6W 1300mA 42VDC ON ON ON<br>63.0W 1350mA 42VDC ON ON<br>65.3W 1400mA 42VDC ON ON<br>67.6W 1450mA 42VDC ON<br>70.2W 1500mA 42VDC ON ON<br>69.2W 1550mA 40VDC ON<br>67.9W 1600mA 38VDC ON<br>66.6W 1650mA 36VDC<br>**----- End of picture text -----**<br>


Remark:     this current is factory default. this Switch is off. 

Efficiency vs Load 

**==> picture [243 x 145] intentionally omitted <==**

**----- Start of picture text -----**<br>
91.00<br>89.00<br>87.00<br>85.00<br>83.00<br>81.00<br>79.00<br>77.00<br>75.00<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>1.65A 1.6A 1.55A 1.5A 1.45A 1.4A 1.35A 1.3A<br>1.25A 1.2A 1.15A 1.1A 1.05A 1A 0.95A 0.9A<br>Load (%)<br>**----- End of picture text -----**<br>


THD vs. Load 

**==> picture [243 x 145] intentionally omitted <==**

**----- Start of picture text -----**<br>
40<br>35<br>30<br>25<br>20<br>15<br>10<br>5<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>2A 1 95A. 1 9A. 1 85A. 1 8A.<br>1 75A. 1 7A. 1 65A. 1 6A. 1 55A.<br>Load (%)<br>**----- End of picture text -----**<br>


## Power factor vs.Load 

**==> picture [243 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.000<br>0.950<br>0.900<br>0.850<br>0.800<br>0.750<br>0.700<br>0.650<br>0.600<br>0.550<br>0.500<br>0.450<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>1.65A 1.6A 1.55A 1.5A 1.45A 1.4A 1.35A 1.3A<br>1.25A 1.2A 1.15A 1.1A 1.05A 1A 0.95A 0.9A<br>Load (%)<br>**----- End of picture text -----**<br>


Life-time vs. case temperature 

**==> picture [243 x 140] intentionally omitted <==**

**----- Start of picture text -----**<br>
110,000<br>100,000<br>90,000<br>80,000<br>70,000<br>60,000<br>50,000<br>40,000<br>30,000<br>20,000<br>50 ℃ 55 ℃ 60 ℃ 65 ℃ 70 ℃ 75 ℃ 80 ℃ 85 ℃ 90 ℃<br>Case temperature (Tc)<br>**----- End of picture text -----**<br>


**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 85°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page - 3 of 6 RD-FR-032 / Rev.00** 

**FLICKER FREE** 

SELV 

**==> picture [179 x 42] intentionally omitted <==**

## **T1A1240165S-60EE** 

## **DALI dimming application** 

## **Wiring diagram** 

**==> picture [475 x 191] intentionally omitted <==**

**----- Start of picture text -----**<br>
ACL<br>ACN<br>Model Name:T1A1240165S-60EE<br>FG<br>ACL<br>ACN<br>Model Name:T1A1240165S-60EE<br>FG<br>DA<br>DA<br>**----- End of picture text -----**<br>


**==> picture [327 x 103] intentionally omitted <==**

- The configuration parameters of the driver can be set through the DALI configuration tool or 

DALI application controller during installation, such as setting device address, group address, power-on level, bus-failure level, scene level, fade time, dimming curve, etc. 

## Power-on level : 

When the driver is in DALI-2 dimming mode, the factory default level after each power-on is the brightest. 

The power-on level can be set through the DALI configuration tool or DALI application controller during installation, and can be set to memory or fixed any brightness (such as off, darkest, 50%, etc.). 

Note: The recommended setting for the default factory power-on level of the DALI-2 driver is the brightest in the DALI-2 standard. 

## Dimming curve 

**==> picture [138 x 128] intentionally omitted <==**

**----- Start of picture text -----**<br>
100%<br>90%<br>80%<br>70%<br>60%<br>50%<br>40%<br>30%<br>20%<br>10%<br>0%<br>0 50 100 150 200 25 4<br>dimming level<br>**----- End of picture text -----**<br>


Remarks: The dimming cur ve can be selected by DALI configuration. The default is logarithmic dimming curve. 

**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 85°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page - 4 of 6 RD-FR-032 / Rev.00** 

**FLICKER FREE** 

## SELV **T1A1240165S-60EE** SPECIFICATIONS C€ 

**==> picture [94 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
pushDIM dimming application<br>**----- End of picture text -----**<br>


**==> picture [55 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Wiring diagram<br>**----- End of picture text -----**<br>


**==> picture [417 x 200] intentionally omitted <==**

**----- Start of picture text -----**<br>
ACL<br>ACN<br>| Kf CoEt i | T il© ACLIDGINPUT FULHAM,1 DimmablejCons p=Z=2ctant Cu r rent LE D Drivere<br>cc | eeAll-a| © ACN/DC- Model Name:T1A1240165S-60EE [8]Eom. SELY WY  EESem oc c= er : |eS=e|<br>eensoI, KEM | porn oG S O aanETno95 e t e Paes eee<br>i HE] S|e e fic’= |AN ime nvenina e ee.¥ toe O BS eS &SX ESSGest Etter]<br>FG<br>PUSH switch<br>[orl rT Dimmable Constant Current LED Driver a a<br>C oee E | a o Model Name:T1A1240 n 165S-60EE A  ed ($) leHsef e |<br>cp I TIT T E SEEM I m ,c | MRUR RO RAON es  OROEOHED =e. (EL] SEV WW Spee ere eeter<br>Co a n e OA 095 etc Peteset]tietapereteetete<br>rete [I!]  | [°°] FE’onsen AN ourMaoe criNaablectaconty 62.7W SOVDC Max. ta60°C G) @ >we= PepeCote t e e t ete<br>FG<br>**----- End of picture text -----**<br>


## Activating pushDIM dimming mode 

After installation according to the wiring diagr am of pushDIM dimming applic ation, long pr ess the  pushbuttom 3 seconds, the driver will aut omatically switch to pushDIM dimming mode. 

Remarks: 

Max. 50 drivers per pushDIM control line. 

Turn on or turn off:short press  pushbuttom for 0.2-1s. 

Dimming: long press pushbuttom for 1-5s. 

Power on status: after power on,the light state will be the same as the lighting on state. 

If the light is on before power on,the light will be on after power on again,brightness will be the same as the last lighting on brightness. 

If the light is off before power off,the light will be off after power on again,short press the pushbuttom,then the light will be on,the brightness will be the same as the last brightness. 

**==> picture [450 x 77] intentionally omitted <==**

**----- Start of picture text -----**<br>
A%(Last) Power off then power on A%(Last)<br>before power off After power on<br>S>==pf) =_--->>==pp}<br>A%(Last) Dim 0% ( OFF ) Power off then power on 0% ( OFF ) Short  pushbuttom  switch A%(Last)<br>before power off before power off after power on after press switch<br>**----- End of picture text -----**<br>


## Multiple light s synchronize control operation 

> method ： 1 

Step 1:long press the pushbuttom,confirm each light is on. 

Step 2:short press the pushbuttom,confirm each light is off. 

Step 3:long press the pushbuttomh,confirm each light is from darkest to brightest and all the lights are synchronous. method ： 2 

- Long press the pushbuttom 15s,all lights output to the brightest state. 

**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 85°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page -  of 5 6 RD-FR-032 / Rev.00** 

## **T1A1240165S-60EE** SELV **FREEFLICKER** SPECIFICATIONS C € ~~conceQD 6p[X] .~~ 

## **Mechanical Specification** 

355 345 

381.5 345 

## **Note : All Dimensions are in mm.** 

**Tolerance=±0.5mm** 

## **Packaging** 

## **Master carton** 

**==> picture [131 x 68] intentionally omitted <==**

**----- Start of picture text -----**<br>
OUTER DIMENSION<br>L W H<br>415mm 330mm 190mm<br>Net Gross<br>Weight Weight QUANTITY<br>9.56 kg 11.1 kg 35 pc.<br>**----- End of picture text -----**<br>


**Installation Instructions:** Connect Wires as per details given on the Driver Screen. Keep proper ventilation around the LED Driver and do not stack any object on it. Also a 10-15 cm clearance must be kept when the adjacent device  is a heat source. Do not exceed the declared Hot spot temperature(Tc max) under any circumstances. 

**Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 05 years @ Tc 85°C from the date of manufacture when properly installed and operated under normal conditions of use.  For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com). Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the equipment described. © Fulham Company Limited, All Rights Reserved.** 

**REV A Page -  of 6 6 RD-FR-032 / Rev.00**