SPD24901

## **Switching Power Supply Type SPD 90W DIN rail mounting** 

- **Installation on DIN Rail 7.5 or 15mm** 

- **Short circuit protection** 

- **PFC standard** 

- **High efficiency** 

- **Power ready output** 

- **LED indicator for DC power ON** 

- **LED indicator for DC low** 

- **Model specific to meet UL 1310 class 2** 

- **UL, cUL listed and TUV/CE approved** 

**==> picture [488 x 230] intentionally omitted <==**

**----- Start of picture text -----**<br>
Product De scrip tion Ordering Key SP D 24 90 1 B<br>The Switching power supplies and compact dimensions and Model<br>SPD series are specially performance are a must. Mounting ( D = Din rail )<br>designed to be used in all This version is specifically Output voltage<br>automation application where developed to meet UL1310 Output power<br>the installation is on a DIN rail class 2. Input type<br>a8) Optional features<br>A rovals<br>pp<br>Input type:  1= single phase<br>Product SafetyRheinland<br>CE @ :W«LISTED © hats<br>O tional Features<br>p<br>Description Code<br>Standard screw terminal Nil<br>Plug-in connectors B<br>p<br>t g<br>p<br>r<br>a<br>a e<br>r<br>u pr<br>e o<br>a ü<br>p v<br>B f<br>y<br>t<br>T ed<br>**----- End of picture text -----**<br>


## **A rovals pp** 

## **Out ut erformances p p** 

|**Model**<br>**Rated output**<br>**Voltage**<br>**(VDC)**|**Output**<br>**Power**<br>**(W)**|**Output**<br>**Current (A)**<br>**Voltage Trim Range**<br>**DC ON LED (VDC)**<br>**Thereshold at startup**<br>**Min. VDC**<br>**Max. VDC**<br>**Min.**<br>**Max.**|**Output**<br>**Current (A)**<br>**Voltage Trim Range**<br>**DC ON LED (VDC)**<br>**Thereshold at startup**<br>**Min. VDC**<br>**Max. VDC**<br>**Min.**<br>**Max.**|**Output**<br>**Current (A)**<br>**Voltage Trim Range**<br>**DC ON LED (VDC)**<br>**Thereshold at startup**<br>**Min. VDC**<br>**Max. VDC**<br>**Min.**<br>**Max.**|**DC LO LED (VDC)**<br>**Thereshold after startup**<br>**Min.**<br>**Max.**|**DC LO LED (VDC)**<br>**Thereshold after startup**<br>**Min.**<br>**Max.**|**Typical**<br>**Efficiency**|
|---|---|---|---|---|---|---|---|
|**SPD2490**<br>24|92|3.8<br>22.5|24.5<br>17.6<br>19.4||17.0|19.4|85%|
|**Output data**||||||||
|**Output voltage accuracy**<br>-0  +1% max(factoryadjusted)||||**Transient recovery time**||300µs||
|**Line regulation**||± 0.5%||**Ripple and noise**||50mVpp||
|**Load regulation**||||**Hold up Time Vi = 115VAC**||25ms||
|Non parallel model||± 1%||**Hold up time Vi = 230VAC**||30ms||
|Parallel model||± 5%||**Minimum load**||0%||
|**Temp. coefficient**||± 0.3% / °C||**Parallel Operation**||No||



## **In ut data p** 

|**Input data**||||
|---|---|---|---|
|**Rated input voltage**|115/230 autoselect|**Rated input current**|2.0 / 0.8A|
|**Voltage range**||**Frequency range**|47- 63 Hz|
|AC in, 115<br>AC in, 230<br>DC in|90 - 132VAC<br>186 - 264VAC<br>210 - 370VDC|**Inrush current**<br>Vi= 115VAC<br>Vi= 230VAC|24A<br>48A|
|||**P.F.C.**|0.7|



**1** 

Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. - 1410 

Switching Power Supply Type SPD 90W DIN rail mounting 

## **Controls and Protections** 

|**Input Fuse**|T3.15/250VAC internal1)|**Power ready**||
|---|---|---|---|
|**Overvoltage Protection**<br>**Output Short Circuit**|102 - 106%<br>Current limited|Threshold at start up<br>(contact closed)<br>Contact rating at 60VDC|17.6 - 19.4<br>0.3A|
|**Rated Overload Protection**|102 - 108%|Insulation|500VDC|



> 1) Fuse not replaceable by user 

## **General data (@ nominal line, full load, 25°C )** 

|**Ambient temperature**|-25°C to 71°C|
|---|---|
|**Derating (>60°C to +71°C)**|2.5% / °C|
|**Ambient humidity**|20 to 95%RH|
|**Storage**|-25°C to +85°C|
|**Protection degree**|IP20|
|**Cooling**|Free air convection|



|**Switching frequency**|80kHz|
|---|---|
|**MTBF(MIL-HDBK-217F)**|480.000h|
|**Case material**|Metal|
||(powderpainted aluminium)|
|**Dimensions L x W x D**|125 x 63.5 x 126|
|**Weight**|920g|



## **A rovals and EMC pp** 

|**Insulation voltage I / O**|3.000VAC min|**CE**|EN50081-1|
|---|---|---|---|
|**Insulation resistance**|100MΩ min||EN55022 class B|
|**UL / cUL**|UL508 listed, UL60950-1<br>Recognized<br>UL1310 class 2||EN61000-3-2<br>EN61000-3-3<br>EN61000-6-2<br>EN61000-6-3|
|**TUV**|EN60950-1||EN55024|



## **Block diagrams** 

**==> picture [347 x 133] intentionally omitted <==**

**----- Start of picture text -----**<br>
L Ys Fuse FilterLine CircuitP.F.C. Inrush CurrentLimiter and 4 Rectifier SmoothingCircuit yt SwitchingDevice Rectifier eed Current Vo +<br>N Detection Vo -<br>ee<br>Y PWM<br>Controller Opto - Reference &<br>Se isolation Error Amp. Po Vout<br>ADJ.<br>Opto - Over Voltage<br>isolation Detection<br>P+} | DCON<br>Output Level (Green LED)<br>Detection DCLOW<br>(Red LED)<br>J RDY       1)<br>(Relay Contact)<br>1) for SPD24 models<br>**----- End of picture text -----**<br>


## **Pin assi nement and front controls g** 

|**Pin No.**|**Designation**|**Description**|
|---|---|---|
|**1**<br>**2**<br>**3**<br>**4**<br>**5**<br>**6**<br>**7**<br>**8**<br>**9**|**RDY**<br>**RDY**<br>**+**<br>**+**<br>**-**<br>**-**<br>**GND**<br>**L**<br>**N**<br>**DC ON**<br>**DC LO**|DC OK, relay normally open contact<br>DC OK, relay normally open contact<br>Positive output terminal<br>Positive output terminal<br>Negative output terminal<br>Negative output terminal<br>Ground terminal to minimise High frequency emissions<br>Phase input ( no polarity with DC input )<br>Neutral input ( no polarity with DC input )<br>DC output ready LED<br>DC low indicator LED|
||**Vout ADJ.**|Trimmer for fine output voltage adjustment|



1410 - Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 

Switching Power Supply Type SPD 90W DIN rail mounting 

## **Installation** 

|**Ventilation and cooling**<br>Normal convection<br>All sides 25mm free space<br>for coolingis recommended<br>**Screw terminals**<br>10-24AWG flexible or solid cable<br>8mm strippingrecommend<br>**Max. torque for screws terminals**<br>Input terminals<br>1.008Nm (9.0lb-in)<br>Output terminals<br>0.616Nm(5.5lb-in)<br>**Plug-in connectors**<br>10-24AWG flexible or solid cable<br>7mm strippingrecommend<br>**Max. torque for plug-in terminals**<br>Input terminals<br>0.784Nm (7.0lb-in)<br>Output terminals<br>0.784Nm (7.0lb-in)<br>~~a~~|
|---|



## **Derating Diagram** 

**==> picture [233 x 174] intentionally omitted <==**

**----- Start of picture text -----**<br>
Power out (%)<br>Pit<br>100<br>90 PtEEEtT tT tT eyeELINAEE EE EL<br>80 PE Ey ENEE EEEE<br>70 PETE EN EE<br>60 PET Ey JE<br>50 PT TTT Ey ee EET EE<br>40 PEEE<br>30 PET a EEE<br>20 PTT Ey EE<br>10 Pt tte Ey tyeEEE E E<br>0 PtT [ETT] ET ye EETE ETTE<br>-25/ -20/ -15/ -10/ +55/ +60/ +65/ +70/ +75/ +80/<br>-13 -4 -5 14 131 140 149 158 167 176<br>Temperature °C / °F +71/<br>159.8<br>**----- End of picture text -----**<br>


## **Mechanical Drawings mm (inches)** 

**==> picture [355 x 214] intentionally omitted <==**

**----- Start of picture text -----**<br>
116 (4.57) 7.0 (0.3) 6 I<br>6 I<br>|<br>N.C. N.C.<br>a o s<br>F fo fo<br>63.2 (2.49) 63.2 (2.49)<br>7 9 7 9<br>143 (5.63)<br>123.6 (4.87) 123.6 (4.87)<br>**----- End of picture text -----**<br>


**3** 

Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. - 1410