SNR-10-223-T

**==> picture [505 x 226] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ripple noise attenuation type for switch mode power supplies(DC) Ordering information<br> SNR -10 -223 - O<br>SNR series (10A)<br>1  2  3  4<br>YS<br>1  Model Name<br>R 2  Rated Current<br>3  Line to ground capacitor code:See table 1.1.<br>table1.1  Line to ground capacitor code<br>Code Line to ground capacitor (nominal value)<br>000 Not Provided<br>223 22000pF<br>Heh) aa ——<br>4  Options<br>D :DIN rail installation type<br>T :Terminal block type<br>DT :Terminal block and DIN rail type<br>DIN rail installation type<br>SE —\<br>< ty * The dimensions change when the option is set.<br>Terminal block type Refer to External view.<br>DIN rail installation type and Terminal block type are option<br>**----- End of picture text -----**<br>


~~a~~ **Features of SNR series (10A)** 

## **Ripple noise attenuation type for switch mode power supplies(DC)** 

- **50 VDC** 

- **Best filter for switch mode power supplies of analog circuits** 

## **Specifications** 

|**No.**|**Items**|**SNR-10-223**|
|---|---|---|
|||**Interface:Connector**|
|**1**|**Rated Voltage DC[V]**<br>~~PO~~|50|
|**2**|**Rated Current DC[A]*1**<br>~~PO~~|10(Peak 20)|
|**3**|**Test Voltage (Terminal-Mounting Plate)**<br>~~PO~~|500 VAC(Cutoff Current = 100mA), 1minute at room temperature and humidity|
|**4**|**Isolation Resistance(Terminal-Mounting Plate)**<br>~~PO~~|500 VDC 50MWmin at room temperature and humidity|
|**5**|**DC resistance**<br>~~PO~~<br>~~PO~~|20mWmax|
|**6**|**Operating temperature**<br>~~PO~~|-40 to +71C (Refer to DeratingCurve)|
|**7**|**Operating humidity**<br>~~PO~~|20 to 95%RH(Non condensing)|
|**8**|**Storage temperature/humidity**<br>~~PO~~|-40 to +75C/20 to 95%RH(Non condensing)|
|**9**|**Vibration**<br>~~PO~~<br>~~PO~~|10 to 55Hz, 19.6m/s2 (2G), 3min. Period, 1hour each X, Y and Z axis|
|**10**|**Impact**<br>~~PO~~|196.1m/s2 (20G), 11ms Once each X, Y and Z axis|
|**11**|**Safety agency approvals**<br>~~PO~~|UL60950-1, C-UL(CSA60950-1), IEC60950-1|
|**12**|**Case size(withoutprojection) /Weight**|52X35X117 mm [2.05X1.38X4.61 inches] (WXHXD) /140gmax (Option : -D, -T, -DT refer to external view)|



* **1  Peak current for 10 sec. And Duty 35% max, refer to Instruction Manual 5. In detail.** 

## ~~eee~~ **Circuit Diagram** ~~eee~~ **Derating Curve** 

**==> picture [249 x 117] intentionally omitted <==**

**----- Start of picture text -----**<br>
CY<br>+Vin ° 0 +Vout<br>+<br>IN Co OUT<br>t<br>-Vin ° e T. -Vout<br>°<br>CY<br>T<br>:<br>CY : Line to ground capacitor   Co : Electrolytic capacitor : Mounting Plate<br>**----- End of picture text -----**<br>


**==> picture [188 x 113] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>80 Pt<br>60 CEE PNT<br>50 tT | EE N<br>40 ee ee<br>20<br>Pt tt eet ey<br>0 ee<br>-40 -30 -20 -10 0 40 50 60 70 71 80<br>Ambient Temperature [C]<br>Load Factor [%]<br>**----- End of picture text -----**<br>


¡Expected life : 10 years 

**SN-5** 

February 04, 2022 

## **SNR series (10A)** 

## **External view** 

## **Standard Type** 

## **Terminal block Type** 

**==> picture [499 x 235] intentionally omitted <==**

**----- Start of picture text -----**<br>
2-f4.5 2-f4.5<br>8-M3<br>[0.18] Mounting Hole [0.18] Mounting Hole<br>TB1 TB2 +Vout<br>CN1 CN2<br>6 Name Plate 6 +Vin Name Plate -Vout<br>-Vin<br>1 1<br>106 ±0.5 106 ±0.5 Terminal cover<br>Mounting  [4.17] Mounting  [4.17]<br>Plate 117 Plate 117<br>[4.61]<br>[4.61]<br>¶ Tolerance : ±1 [±0.04]<br>¶ Weight : 140g max<br>¶ PCB Material /thickness : CEM3 /1.6mm [0.06 inches] ¶ Tolerance : ±1 [±0.04]<br>CN1 CN2 ¶ Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04] ¶ Weight : 150g max<br>Pin No. Function Pin No. Function ¶ Case : PBT ¶ PCB Material /thickness : CEM3 /1.6mm [0.06 inches]<br>1,2,3 -Vin 1,2,3 -Vout ¶ Dimensions in mm, [  ]=inches ¶ Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]<br>¶ Case : PBT<br>4,5,6 +Vin 4,5,6 +Vout      for CN1 to CN2¶ Keeping drawing current per pin below 5A (7A at peak current) ¶¶ Dimensions in mm, [  ]=inches Terminal block screw tightening torque M3:0.8N-m (8.5kgf-cm) max<br>I/O Connector Mating connector Terminal ¶ Keeping drawing current per pin below 8A (10A at peak current) for TB1 to TB2<br>CN1,CN2 B6P-VH VHR-6N Reel:SVH-21T-P1.1<br>Bulk:BVH-21T-P1.1<br>(Mfr:J.S.T)<br>0.5<br>± 0.5<br>52 [2.05] 40 [1.57] 52 [2.05] ±40 [1.57]<br>7.6 [0.3]<br>6.2 [0.24]<br>35 [1.38]<br>35 [1.38]<br>**----- End of picture text -----**<br>


Option harness : Refer to Instruction Manual 4 

## **DIN rail installation Type** 

**==> picture [200 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Terminal block type+DIN rail installation Type<br>**----- End of picture text -----**<br>


**==> picture [495 x 257] intentionally omitted <==**

**----- Start of picture text -----**<br>
8-M3<br>CN1 CN2 TB1 TB2<br>+Vout<br>6 Name Plate 6 +Vin Name Plate -Vout<br>-Vin<br>1 1<br>M4 108.5 Mounting Plate M4 108.5 Mounting Plate Terminal cover<br>FG [4.27] FG [4.27]<br>112 112<br>[4.41] [4.41]<br>DIN rail ¶ Tolerance : ±1 [±0.04] DIN rail<br>¶ Weight : 150g max<br>¶ PCB Material /thickness : CEM3 / 1.6mm [0.06 inches] ¶ Tolerance : ±1 [±0.04]<br>CN1 CN2 ¶ Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04] ¶ Weight : 160g max<br>Pin No. Function Pin No. Function ¶ Case : PBT ¶ PCB Material /thickness : CEM3 /1.6mm [0.06 inches]<br>1,2,3 -Vin 1,2,3 -Vout ¶ Dimensions in mm, [  ]=inches ¶ Mounting plate : Iron (surface finishing : nickel plating) t=1.0 [0.04]<br>4,5,6 +Vin 4,5,6 +Vout ¶ Keeping drawing current per pin below 5A (7A at peak current) ¶ Case : PBT<br>     for CN1 to CN2 ¶ Dimensions in mm, [  ]=inches<br>I/O Connector Mating connector Terminal ¶ Terminal block screw tightening torque M3:0.8N-m (8.5kgf-cm) max<br>CN1,CN2 B6P-VH VHR-6N Reel:SVH-21T-P1.1 ¶ Keeping drawing current per pin below 8A (10A at peak current) for TB1 to TB2<br>Bulk:BVH-21T-P1.1<br>(Mfr:J.S.T)<br>Option harness : Refer to Instruction Manual 4<br>IN OUT IN OUT<br>52 [2.05] 52 [2.05]<br>10 [0.39] 10 [0.39] 6.2 [0.24] 7.6 [0.3]<br>35 [1.38] 8 [0.31] 35 [1.38] 8 [0.31]<br>(9) [0.35] (9) [0.35]<br>**----- End of picture text -----**<br>


## ¡ **Note when installing the EMI/EMC Filter on a DIN rail.** 

**When the EMI/EMC Filter is grounded through the DIN rail, the proper noise attenuation may not be achieved.** 

**Be sure to connect the FG terminal of the EMI/ EMC Filter body to the earth.** 

**==> picture [190 x 102] intentionally omitted <==**

**----- Start of picture text -----**<br>
IN<br>DIN rail<br>Name Plate<br>OUT<br>1 6 CN1<br>1 6 CN2<br>**----- End of picture text -----**<br>


**SN-6** 

February 04, 2022