SMP1330-005LF

## **DATA SHEET** 

## **SMP1330 Series: Plastic Packaged Limiter Diodes** 

## **Applications** 

- WLAN, WiMAX 

- Cellular infrastructure 

- RFID readers 

- Test instruments 

## **Features** 

- Low-distortion design 

- Limiter performance to 4 GHz and higher 

- Low insertion loss 

- Low-cost plastic package 

- Packages rated MSL1 @ 260  C per JEDEC J-STD-020 

   - Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. 

## **Description** 

The SMP1330 series of limiter diodes is designed for use as passive receiver protectors in wireless and other RF systems covering frequencies up to 4 GHz and higher. These diodes use Skyworks limiter diode technology to produce gold-doped, thin base limiters for low-loss, low-distortion performance and good limiter action. 

The SMP1330 series of diodes has been characterized in limiter circuits and tightly specified to ensure consistent performance. 

- For additional information, refer to _Skyworks Definition of Green™_ , document number SQ04-0074. 

Skyworks Solutions, Inc.  •  Phone [781] 376-3000  •  Fax [781] 376-3100  •  sales@skyworksinc.com  •  www.skyworksinc.com 200050N  •  Skyworks Proprietary Information  •  Products and Product Information are Subject to Change Without Notice  •  June 30, 2016 

**DATA SHEET  •  SMP1330 SERIES DIODES** 

## **Electrical and Mechanical Specifications** 

The absolute maximum ratings of the SMP1330 series are provided in Table 1. 

The part numbers and configurations for the SMP1330 series are provided in Table 2. Electrical specifications are provided in Table 3. Typical 1 GHz limiter performance measurements are provided in Table 4. 

Input power versus output power performance for the SMP1330 series is illustrated in Figure 1. Package dimensions are shown in Figures 2 (SOT-23) and 4 (SOD-882). Tape and reel dimensions are provided in Figures 3 (SOT-23) and 5 (SOD-882). 

## **Package and Handling Information** 

Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. 

The SMP1330 series is rated to Moisture Sensitivity Level 1 (MSL1) at 260  C. These diodes can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, _Solder Reflow Information_ , document number 200164. 

Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. 

**Table 1. SMP1330 Series Absolute Maximum Ratings[1]** 

|**Parameter**|**Symbol**|**Minimum**|**Maximum**|**Units**|
|---|---|---|---|---|
|Reverse voltage|VR||20|V|
|Forward current|IF||100|mA|
|CW incident power @ 25 °C lead temperature|||1|W|
|Peak incident power @ 1% duty factor, 1μs pulse|||100|W|
|Power dissipation @ 25°C lead temperature|PD||250|mW|
|Storage temperature|TSTG|–65|+150|C|
|Operating temperature|TA|–65|+150|C|



1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. 

_**ESD HANDLING** : Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times._ 

**Table 2. Part Number and Configuration** 

|**Table 2. Part Number and Configuration**||||
|---|---|---|---|
|||||
|||||
|Series Pair|Single|||
|SOT-23|SOD-882|||
|**SMP1330-005LF**<br>Green™<br>Marking: RQ2|**SMP1330-040LF**<br>Green™<br>Marking: F|||
|LS= 1.5 nH|LS= 0.45 nH|||



The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs. 

Skyworks Solutions, Inc.  •  Phone [781] 376-3000  •  Fax [781] 376-3100  •  sales@skyworksinc.com  •  www.skyworksinc.com June 30, 2016  •  Skyworks Proprietary Information  •  Products and Product Information are Subject to Change Without Notice  •  200050N 

2 

**DATA SHEET  •  SMP1330 SERIES DIODES** 

**Table 3. SMP1330 Series Electrical Specifications[1]** 

**(TA = +25**  **C Unless Otherwise Noted)** 

|**Parameter**|**Symbol**|**Test Condition**|**Min**|**Typical**|**Max**|**Units**|
|---|---|---|---|---|---|---|
|Series resistance|RS|F = 100 MHz, IF= 10 mA||1.2|1.5|Ω|
|Capacitance|CT|0 V<br>F = 1 MHz<br>F = 1 GHz||0.7<br>0.7|1.0|pF<br>pF|
|Capacitance ratio|CTR|CT@ 0 V/CT@ 6 V|||1.22|–|
|Conductance|G|0 V, F = 1 GHz||50||μs|
|Carrier lifetime|TI|IF= 10 mA||4||ns|
|I region width||||2||μm|
|Breakdown voltage|VB|IR= 10μA|20|35|50|V|



1 Performance is guaranteed only under the conditions listed in this table. 

**Table 4. Typical 1 GHz Limiter Performance** 

|**Parameter**||**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**SMP1330-005**|**Condition**|**Condition**|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|Connection|Parallel||||||||||||||
|Insertion loss|0.3 dB||||||||||||Input power = –20 dBm||
|IP3|+30 dBm||||||||||||Input power = < 0 dBm||
|1 dB compression|+10 dBm||||||||||||||
|Attenuation @ +20 dBm|8.8 dB||||||||||||||
|Attenuation @ +30 dBm|14 dB||||||||||||||
||Input Power (dBm)<br>Output Power (dBm)<br>+25<br>+20<br>+15<br>+10<br>+5<br>0<br>0<br>+10<br>+14<br>+18<br>+22<br>+26<br>+30<br>200050-001||||||||||||||
||||||||||||||||
||||||||||||||||
||||||||||||||||
||||||||||||||||
||||||||||||||||



**Figure 1. Typical 1 GHz Limiter Performance** 

Skyworks Solutions, Inc.  •  Phone [781] 376-3000  •  Fax [781] 376-3100  •  sales@skyworksinc.com  •  www.skyworksinc.com 200050N  •  Skyworks Proprietary Information  •  Products and Product Information are Subject to Change Without Notice  •  June 30, 2016 

3 

**DATA SHEET  •  SMP1330 SERIES DIODES** 

**==> picture [214 x 195] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.110 (2.80 mm) Min<br>0.120 (3.04 mm) Max 0.012 (0.30 mm) Min<br>0.020 (0.50 mm) Max<br>3<br>0.083 (2.10 mm) Min 0.047 (1.20 mm) Min<br>0.104 (2.64 mm) Max 0.055 (1.40 mm) Max<br>1 2<br>0.037 (0.95 mm) Ref<br>0.020 (0.51 mm) Ref<br>0.076 (1.92 mm) Ref<br>0.035 (0.89 mm) Min<br>0.003 (0.080 mm) Min<br>0.044 (1.12 mm) Max<br>0.008 (0.20 mm) Max<br>8° Max.<br>0.0005 (0.01 mm) Min<br>0.004 (0.10 mm) Max<br>0.022 (0.55 mm) Ref<br>Dimensions are in inches (millimeters shown in parentheses) 200050-002<br>**----- End of picture text -----**<br>


**Figure 2. SOT-23 Package Dimension Drawing** 

**==> picture [510 x 183] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.00<br>2.00 ± 0.05<br>0.25 ± 0.05 ø1.00 Min ø1.5 + 0.1/–0<br>1.75 ± 0.10<br>4.00<br>(See Note 5) A<br>2.70 (Bo)<br>R 0.3 Max<br>2.2<br>A<br>1.0<br>1.20 (Ko) R 0.5 Typ Pin 1 Indicator<br>3.10 (Ao)<br>0.8 ± 0.05<br>3.50 ± 0.05 8.00 + 0.3/–0.1<br>**----- End of picture text -----**<br>


**==> picture [47 x 11] intentionally omitted <==**

**----- Start of picture text -----**<br>
Section A<br>**----- End of picture text -----**<br>


_Notes:_ 

_1. Carrier tape: black conductive polycarbonate._ 

_2. Cover tape material: transparent conductive PSA._ 

_3. Cover tape size: 5.40 mm width._ 

_4. Tolerance  ±0.10 mm._ 

_5. Ten sprocket hole pitch cumulative tolerance: ±0.2 mm._ 

_6. All measurements are in millimeters._ 

_7.  Alternative carrier tape dimensions are: Ao = 3.3 Bo = 2.9 Ko = 1.22_ 

**==> picture [34 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
200050-003<br>**----- End of picture text -----**<br>


**Figure 3. SOT-23 Tape and Reel Dimensions** 

Skyworks Solutions, Inc.  •  Phone [781] 376-3000  •  Fax [781] 376-3100  •  sales@skyworksinc.com  •  www.skyworksinc.com June 30, 2016  •  Skyworks Proprietary Information  •  Products and Product Information are Subject to Change Without Notice  •  200050N 

4 

**DATA SHEET  •  SMP1330 SERIES DIODES** 

**==> picture [503 x 189] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.03  C<br>Seating Plane<br>0.05/0.00 5<br>Pin 1 Indicator 2X 0.25 ± 0.05<br>C<br>2X 0.05 0.10  M   A  B<br>0.325<br>Terminal 1<br>1.000  0.650<br>B<br>A  0.600  2X 0.50 ± 0.05<br>0.46 + 0.04 4<br>0.10  M   A  B<br>0.05  –0.06<br>2X<br>**----- End of picture text -----**<br>


**==> picture [20 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Notes:<br>**----- End of picture text -----**<br>


_1. All measurements are in millimeters._ 

_2. Dimensions and tolerances according to ASME Y14.5M-1994._ 

_3. These packages are used principally for discrete devices._ 

_4. This dimension includes stand-off height and package body thickness,_ 

   - _but does not include attached features, e.g., external heatsink or chip capacitors._ 

   - _An integral heatslug is not considered an attached feature._ 

**==> picture [29 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
200050-004<br>**----- End of picture text -----**<br>


_5.  This dimension is primarily terminal plating, but does not include small metal protrusion._ 

**Figure 4. SOD-882 Package Dimension Drawing** 

**==> picture [511 x 237] intentionally omitted <==**

**----- Start of picture text -----**<br>
4.00 ± 0.10 Cathode<br>2.00 ± 0.05 Indicator ∅1.55 ± 0.05 (D0)<br>0.20<br>A 1.75 ± 0.10<br>∅0.40 ± 0.05 (D1)<br>0.47 ± 0.05 (Ko) B B A<br>2.00 ± 0.05<br>Section A<br>0.70 ± 0.05 (A0)<br>Notes:<br> 1. Carrier tape: black conductive polycarbonate.<br> 2. Cover tape: transparent conductive material.<br> 3. Cover tape size: 5.4 mm width. 4. ESD surface resistivity is ≥1 x 10 [4]  ~ ≤ 1 x 10 [8]  Ohms/square. Section B 200050-005<br>1.15 ± 0.05 (Bo) 3.50 ± 0.05 8.00 ± 0.1<br>**----- End of picture text -----**<br>


_5. All dimensions are in millimeters._ 

**Figure 5. SOD-882 Tape and Reel Dimensions** 

Skyworks Solutions, Inc.  •  Phone [781] 376-3000  •  Fax [781] 376-3100  •  sales@skyworksinc.com  •  www.skyworksinc.com 200050N  •  Skyworks Proprietary Information  •  Products and Product Information are Subject to Change Without Notice  •  June 30, 2016 

5 

**DATA SHEET  •  SMP1330 SERIES DIODES** 

Copyright © 2009-2010, 2012-2016 Skyworks Solutions, Inc. All Rights Reserved. 

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. 

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. 

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. 

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. 

Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. 

Skyworks Solutions, Inc.  •  Phone [781] 376-3000  •  Fax [781] 376-3100  •  sales@skyworksinc.com  •  www.skyworksinc.com June 30, 2016  •  Skyworks Proprietary Information  •  Products and Product Information are Subject to Change Without Notice  •  200050N 

6