![SMDTD04100TB00MQ00 — General Purpose Film Capacitor, Metallized PET, 2824 [7260 Metric], 1 µF, ± 20%, 63 V, 100 V](/media/5/E/5/7B2C031B035505E5.webp)
Image not available
Illustrative purposes only
SMDTD04100TB00MQ00
General Purpose Film Capacitor, Metallized PET, 2824 [7260 Metric], 1 µF, ± 20%, 63 V, 100 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: WIMA
- Product type: General Purpose Film Capacitors
- Available until stocks are exhausted
- SVHC: No SVHC (27-Jun-2018)
- Capacitance: 1µF
- Voltage(AC): 63V
- Voltage(DC): 100V
- Lead Spacing: -
- Product Range: SMDT Series
- Product Width: 6.1mm
- Qualification: -
- Product Height: 5mm
- Product Length: 7.2mm
- Dielectric Type: Metallized PET
- Humidity Rating: -
- Capacitor Mounting: Surface Mount
- Capacitor Terminals: Wraparound
- Capacitance Tolerance: ± 20%
- Capacitor Case / Package: 2824 [7260 Metric]
- Operating Temperature Max: 125°C
- Operating Temperature Min: -55°C
| Delivery and price | |
|---|---|
| Units per pack | 500 |
| Price | 0.753 € |
| Current stock | 1000+ |
| Lead time | 30 days |
Datasheet
## ~~WIMA SMD-PET~~ ## x **D** Metallized Polyester (PET) SMD Film Capacitors with Box Encapsulation. Capacitances from 0.01 m = F to 6.8 mF. Rated Voltages from 63 VDC to 1000 VDC. Size Codes from 1812 to 6054. ## Special Features ## Electrical Data - ˜ Size codes 1812, 2220, 2824, 4030, 5040 and 6054 with PET and encapsulated - ˜ Operating temperature up to 100° C - ˜ Self-healing - ˜ According to RoHS 2011/65/EU ## ~~Typical Applications~~ ## Capacitance range: 0.01 mF to 6.8 mF ## Rated voltages: 63 VDC, 100 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC Capacitance tolerances: ±20%, ±10% (±5% available subject to special enquiry) Operating temperature range: ## Test voltage: 1.6 Ur, 2 sec. Voltage derating: A voltage derating factor of 1.25 % per K must be applied from +85) C for DC voltages and from +75) C for AC voltages Reliability: Operational life 300 000 hours Failure rate 2 fit (0.5 x Ur and 40+ C) For general DC-applications e.g. –55+ C to +100+ C (+125° C available ˜ By-pass subject to special enquiry) ˜ Blocking Climatic test category: ˜ Coupling and decoupling 55/100/21 according to IEC ˜ Timing for size codes 1812 to 2824 55/100/56 according to IEC for size codes 4030 to 6054 ~~Construction~~ Insulation resistance at +20+ C: Dielectric: Ur Utest C 0.33 mF 0.33 mF < C 6.8 mF Polyethylene-terephthalate (PET) film 63 VDC 50 V Capacitor electrodes: 100 VDC 100 V 3.75 x 10[3] M¸ 1250 sec (M¸ x mF) Vacuum-deposited Internal construction: 250 VDC 100 V 1 x 10[4] M¸ 3000 sec (M¸ x mF) Measuring time: 1 min. Dissipation factors at +20) C: tan d Plastic film at f C 0.1 mF 0.1 mF < C 1.0 mF C > 1.0 mF Vacuum-deposited electrode 1 kHz 8 x 10[-3] 8 x 10[-3] 10 x 10[-3] Metal contact layer (schoopage) 10 kHz 15 x 10[-3] 15 x 10[-3] – 100 kHz 30 x 10[-3] – – Terminating plate Maximum pulse rise time: for pulses equal to the rated voltage ~~Ss SS—————~~ Pulse rise time V/msec Capacitance Encapsulation: max. operation/test mF Solvent-resistant, flame-retardant plastic 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC 1000 VDC case, UL 94 V-0 0.01 ... 0.022 30/300 35/350 40/400 35/350 40/400 50/500 Terminations: 0.033 ... 0.068 20/200 20/200 40/400 21/210 25/250 32/320 Tinned plates. 0.1 ... 0.22 10/100 10/100 12/120 14/140 17/170 – Marking: 0.33 ... 0.68 8/80 6/60 9/90 10/100 – – Box colour: Black. 1.0 ... 2.2 3.5/35 4/40 7/70 – – – 3.3 ... 6.8 3/30 3/30 – – – – ~~Bnannn Dip Solder Test/Processing Packing~~ Resistance to soldering heat: Available taped and reeled in blister pack. Test Tb in accordance with DIN IEC 60068-2-58/DIN EN 60384-19. Soldering bath temperature max. 260+ C. Soldering duration max. 5 sec. Change in capacitance DC/C 5 %. Soldering process: Re-flow soldering (see temperature/time graphs page 13). Detailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information. 17 D ## ~~WIMA SMD-PET~~ ## Continuation ## General Data |D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~| |---|---|---|---|---|---|---|---|---|---| |Continuation<br>General Data<br>~~-~~|||||||||| |Capacitance|63 VDC/40 VAC*<br>Size<br>H<br>Part number<br>code ± 0.3|||100 VDC/63 VAC*<br>Size<br>H<br>Part number<br>code ± 0.3|||250 VDC/160 VAC*<br>Size<br>H<br>Part number<br>code ± 0.3||| |0.01mF|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02100KA00_ _ _ _<br>SMDTC02100QA00_ _ _ _<br>SMDTC02100TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02100KA00_ _ _ _<br>SMDTD02100QA00_ _ _ _<br>SMDTD02100TA00_ _ _ _|2220<br>2824|3.5<br>3.0|SMDTF02100QA00_ _ _ _<br>SMDTF02100TA00_ _ _ _| |0.015 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02150KA00_ _ _ _<br>SMDTC02150QA00_ _ _ _<br>SMDTC02150TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02150KA00_ _ _ _<br>SMDTD02150QA00_ _ _ _<br>SMDTD02150TA00_ _ _ _|2220<br>2824|3.5<br>3.0|SMDTF02150QA00_ _ _ _<br>SMDTF02150TA00_ _ _ _| |0.022 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02220KA00_ _ _ _<br>SMDTC02220QA00_ _ _ _<br>SMDTC02220TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02220KA00_ _ _ _<br>SMDTD02220QA00_ _ _ _<br>SMDTD02220TA00_ _ _ _|2220<br>2824|3.5<br>3.0|SMDTF02220QA00_ _ _ _<br>SMDTF02220TA00_ _ _ _| |0.033 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02330KA00_ _ _ _<br>SMDTC02330QA00_ _ _ _<br>SMDTC02330TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02330KA00_ _ _ _<br>SMDTD02330QA00_ _ _ _<br>SMDTD02330TA00_ _ _ _|2220<br>2824<br>4030|3.5<br>3.0<br>5.0|SMDTF02330QA00_ _ _ _<br>SMDTF02330TA00_ _ _ _<br>SMDTF02330VA00_ _ _ _| |0.047 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02470KA00_ _ _ _<br>SMDTC02470QA00_ _ _ _<br>SMDTC02470TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02470KA00_ _ _ _<br>SMDTD02470QA00_ _ _ _<br>SMDTD02470TA00_ _ _ _|2220<br>2824<br>4030|3.5<br>3.0<br>5.0|SMDTF02470QA00_ _ _ _<br>SMDTF02470TA00_ _ _ _<br>SMDTF02470VA00_ _ _ _| |0.068 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02680KA00_ _ _ _<br>SMDTC02680QA00_ _ _ _<br>SMDTC02680TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02680KA00_ _ _ _<br>SMDTD02680QA00_ _ _ _<br>SMDTD02680TA00_ _ _ _|2220<br>2824<br>4030|4.5* <br>3.0<br>5.0|SMDTF02680QB00_ _ _ _<br>SMDTF02680TA00_ _ _ _<br>SMDTF02680VA00_ _ _ _| |0.1mF|1812<br>2220<br>2824|4.0* <br>3.5<br>3.0|SMDTC03100KB00_ _ _ _<br>SMDTC03100QA00_ _ _ _<br>SMDTC03100TA00_ _ _ _|1812<br>2220<br>2824|4.0* <br>3.5<br>3.0|SMDTD03100KB00_ _ _ _<br>SMDTD03100QA00_ _ _ _<br>SMDTD03100TA00_ _ _ _|2220<br>2824<br>4030|4.5* <br>5.0<br>5.0|SMDTF03100QB00_ _ _ _<br>SMDTF03100TB00_ _ _ _<br>SMDTF03100VA00_ _ _ _| |0.15 „|1812<br>2220<br>2824|4.0* <br>3.5<br>3.0|SMDTC03150KB00_ _ _ _<br>SMDTC03150QA00_ _ _ _<br>SMDTC03150TA00_ _ _ _|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTD03150KB00_ _ _ _<br>SMDTD03150QA00_ _ _ _<br>SMDTD03150TA00_ _ _ _|2824<br>4030|5.0<br>5.0|SMDTF03150TB00_ _ _ _<br>SMDTF03150VA00_ _ _ _| |0.22 „|1812<br>2220<br>2824|4.0* <br>3.5<br>3.0|SMDTC03220KB00_ _ _ _<br>SMDTC03220QA00_ _ _ _<br>SMDTC03220TA00_ _ _ _|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTD03220KB00_ _ _ _<br>SMDTD03220QA00_ _ _ _<br>SMDTD03220TA00_ _ _ _|2824<br>4030|5.0<br>5.0|SMDTF03220TB00_ _ _ _<br>SMDTF03220VA00_ _ _ _| |0.33 „|1812<br>2220<br>2824|4.0<br>4.5* <br>5.0*|SMDTC03330KB00_ _ _ _<br>SMDTC03330QB00_ _ _ _<br>SMDTC03330TB00_ _ _ _|2220<br>2824<br>4030|4.5<br>5.0<br>5.0|SMDTD03330QB00_ _ _ _<br>SMDTD03330TB00_ _ _ _<br>SMDTD03330VA00_ _ _ _|<br>2824<br>4030<br>5040|5.0<br>5.0<br>6.0|SMDTF03330TB00_ _ _ _<br>SMDTF03330VA00_ _ _ _<br>SMDTF03330XA00_ _ _ _| |0.47 „|1812<br>2220<br>2824|4.0<br>4.5* <br>5.0*|SMDTC03470KB00_ _ _ _<br>SMDTC03470QB00_ _ _ _<br>SMDTC03470TB00_ _ _ _|2220<br>2824<br>4030|4.5<br>5.0<br>5.0|SMDTD03470QB00_ _ _ _<br>SMDTD03470TB00_ _ _ _<br>SMDTD03470VA00_ _ _ _|<br>4030<br>5040|5.0<br>6.0|SMDTF03470VA00_ _ _ _<br>SMDTF03470XA00_ _ _ _| |0.68 „|2220<br>2824<br>4030|4.5<br>5.0* <br>5.0|SMDTC03680QB00_ _ _ _<br>SMDTC03680TB00_ _ _ _<br>SMDTC03680VA00_ _ _ _|2824<br>4030<br>5040|5.0<br>5.0<br>6.0|SMDTD03680TB00_ _ _ _<br>SMDTD03680VA00_ _ _ _<br>SMDTD03680XA00_ _ _ _|5040|6.0|SMDTF03680XA00_ _ _ _| |1.0mF|2220<br>2824<br>4030|4.5<br>5.0* <br>5.0|SMDTC04100QB00_ _ _ _<br>SMDTC04100TB00_ _ _ _<br>SMDTC04100VA00_ _ _ _|2824<br>4030<br>5040|5.0<br>5.0<br>6.0|SMDTD04100TB00_ _ _ _<br>SMDTD04100VA00_ _ _ _<br>SMDTD04100XA00_ _ _ _|6054|7.0|SMDTF04100YA00_ _ _ _| |1.5 „|2824<br>4030|5.0<br>5.0|SMDTC04150TB00_ _ _ _<br>SMDTC04150VA00_ _ _ _|4030<br>5040|5.0<br>6.0|SMDTD04150VA00_ _ _ _<br>SMDTD04150XA00_ _ _ _|*Version according to catalogue 2013<br>still available<br>Part number completion:<br>Tolerance:<br>20 % = M<br>10 % = K<br>5 % = J<br>Packing:<br>bulk = S<br>Pin length: none = 00<br>Taped version see page 148.||| |2.2 „|2824<br>4030|5.0<br>5.0|SMDTC04220TB00_ _ _ _<br>SMDTC04220VA00_ _ _ _|5040|6.0|SMDTD04220XA00_ _ _ _|||| |3.3 „|4030|5.0|SMDTC04330VA00_ _ _ _|5040|6.0|SMDTD04330XA00_ _ _ _|||| |4.7 „|5040|6.0|SMDTC04470XA00_ _ _ _|6054|7.0|SMDTD04470YA00_ _ _ _|||| |6.8 „|6054|7.0|SMDTC04680YA00_ _ _ _||||||| |* AC voltage: f =50 Hz; 1.4 x Urms+ UDC Ur<br>Dims. in mm.<br>Rights reserved to amend design data without prior notification.|||||||||| * AC voltage: f = 50 Hz; 1.4 x Urms + UDC Ur Dims. in mm. Rights reserved to amend design data without prior notification. Continuation page 19 18 D ## ~~WIMA SMD-PET~~ ## Continuation ## General Data |D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |Continuation<br>General Data<br>~~-~~||||||||||||||||| |Capacitance|400 VDC/200 VAC*<br>Size<br>H<br>Part number<br>code<br>± 0.3|||630 VDC/300 VAC*<br>Size<br>H<br>Part number<br>code<br>± 0.3||||||||||1000 VDC/400 VAC*<br>Size<br>H<br>Part number<br>code<br>± 0.3||| |0.01mF|2824<br>4030|3.0<br>5.0|SMDTG02100TA00_ _ _ _<br>SMDTG02100VA00_ _ _ _|4030|<br>5.0|||SMDTJ02100VA00_ _ _ _||||||||| |0.015 „|2824<br>4030|3.0<br>5.0|SMDTG02150TA00_ _ _ _<br>SMDTG02150VA00_ _ _ _|4030|<br>5.0|||SMDTJ02150VA00_ _ _ _||||||5040|6.0|SMDTO12150XA00_ _ _ _| |0.022 „|2824<br>4030|5.0* <br>5.0|SMDTG02220TB00_ _ _ _<br>SMDTG02220VA00_ _ _ _|5040|<br>6.0|||SMDTJ02220XA00_ _ _ _||||||5040|6.0|SMDTO12220XA00_ _ _ _| |0.033 „|2824<br>4030|5.0<br>5.0|SMDTG02330TB00_ _ _ _<br>SMDTG02330VA00_ _ _ _|5040|<br>6.0|||SMDTJ02330XA00_ _ _ _||||||5040|6.0|SMDTO12330XA00_ _ _ _| |0.047 „|2824<br>4030|5.0<br>5.0|SMDTG02470TB00_ _ _ _<br>SMDTG02470VA00_ _ _ _|5040|<br>6.0|||SMDTJ02470XA00_ _ _ _||||||6054|7.0|SMDTO12470YA00_ _ _ _| |0.068 „|4030<br>5040|5.0<br>6.0|SMDTG02680VA00_ _ _ _<br>SMDTG02680XA00_ _ _ _|5040|<br>6.0|||SMDTJ02680XA00_ _ _ _||||||||| |0.1mF|4030<br>5040|5.0<br>6.0|SMDTG03100VA00_ _ _ _<br>SMDTG03100XA00_ _ _ _|6054|<br>7.0|||SMDTJ03100YA00_ _ _ _||||||||| |0.15 „|4030<br>5040|5.0<br>6.0|SMDTG03150VA00_ _ _ _<br>SMDTG03150XA00_ _ _ _|6054|<br>7.0|||SMDTJ03150YA00_ _ _ _||||||||| |0.22 „|5040|6.0|SMDTG03220XA00_ _ _ _|6054|<br>7.0|||SMDTJ03220YA00_ _ _ _||||||||| |0.33 „|5040|6.0|SMDTG03330XA00_ _ _ _|||||||||||||| |0.47 „|6054|7.0|SMDTG03470YA00_ _ _ _|||||||||||||| |* AC voltage: f =50 Hz; 1.4 x Urms+ UDC Ur<br>*Version according to catalogue 2013 still available<br>Dims. in mm.<br> <br> <br> <br> <br> <br> <br> <br><br>||||Solder pad<br>H<br>L<br>d<br>d<br>Bonding slit|||recommendation<br>W<br>b<br>c<br>a|||||||Part number completion:<br>Tolerance:<br>20 % = M<br>10 % = K<br>5 % = J<br>Packing:<br>bulk = S<br>Pin length: none = 00<br>Taped version see page 148.||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||Size<br>code||L<br>±0.3||W<br>±0.3||d|a<br>min.|b<br>min.|c<br>max.|||| |||||1812<br>2220<br>2824<br>4030<br>5040<br>6054||4.8<br>5.7<br>7.2<br>10.2<br>12.7<br>15.3||3.3<br>5.1<br>6.1<br>7.6<br>10.2<br>13.7|0.5<br>0.5<br>0.5<br>0.5<br>0.7<br>0.7||1.2<br>1.2<br>1.2<br>2.5<br>2.5<br>2.5|3.5<br>4<br>4<br>6<br>6<br>6|3.5<br>4.5<br>6.5<br>9 <br>11.5<br>14|||| |Rights reserved to amend design data without prior notification.||||||||||||||||| Rights reserved to amend design data without prior notification. 19 D Recommendation for Processing and Application of SMD Capacitors ## ~~Layout Form~~ The components can generally be positioned on the carrier material as desired. In order to prevent soldering shadows or ensure regular temperature distribution, extreme concentration of the components should be avoided. In practice, it has proven best to keep a minimum distance of the soldering surfaces between two WIMA SMDs of twice the height of the components. ## ~~Soldering Process~~ ## Re-flow soldering ## ~~Solder Pad Recommendation~~ |d<br>Y<br>-|H|L<br>7<br>||W<br>b<br>c<br>a<br>if<br>>|<br>[|<br>Ls|W<br>b<br>c<br>a<br>if<br>>|<br>[|<br>Ls|W<br>b<br>c<br>a<br>if<br>>|<br>[|<br>Ls|W<br>b<br>c<br>a<br>if<br>>|<br>[|<br>Ls||| |---|---|---|---|---|---|---|---|---| |d<br>Bonding slit<br>Size<br>L<br>le|||W<br>d<br>a<br>in<br>[__]|||a|b|c| |code||± 0.3|± 0.3||min.||min.|max.| |1812||4.8|3.3<br>0.5||1.2||3.5|3.5| |2220||5.7|5.1<br>0.5||1.2||4|4.5| |2824||7.2|6.1<br>0.5||1.2||4|6.5| |4030||10.2|7.6<br>0.5||2.5||6|9| |5040 <br>6054||12.7 <br> 15.3|10.2<br>0.7<br> 13.7 0.7||2.5<br>2.5||6<br>6|11.5<br>14| The solder pad size recommendations given for each individual series are to be understood as minimum dimensions which can at any time be adjusted to the layout form. ## ~~Processing~~ The processing of SMD components - assembling - soldering - electrical final inspection/calibrating must be regarded as a complete process. The soldering of the printed circuit board, for example, can constitute considerable stress on all the electronic components. The manufacturer‘s instructions on the processing of the components are mandatory. Temperature/time graph for the permissible processing temperature of the WIMA SMD film capacitor for typical convection soldering processes. Due to versatile procedures exact processing parameters for re-flow soldering processes cannot be specified. The graph depicted is to be understood as a recommendation to help establishing a suitable soldering profile fulfilling the requirements in practice at the user. During processing a max. temperature of T=210° C inside the component should not be exceeded. Due to the differing heat absorption the length of the soldering process should be kept as short as possible for smaller size codes. ## ~~SMD Handsoldering~~ The below data are to be regarded as guideline values and should serve to avoid damage to the dielectric caused by excessive heat during the soldering process. The soldering quality depends on the tool used and on the skill and experience of the person with the soldering iron in hand. WIMA SMD capacitors with plastic film dielectric are generally suitable for hand-soldering, e. g. for lab purposes, with a soldering iron where, however, similar to automated soldering processes, a certain duration and temperature should not be exceeded. These parameters are dependent on the physical size of the components and the relevant heat absorption involved. |Size code|Temperature ° C / ° F|Time duration| |---|---|---| |1812<br>2220<br>2824<br>4030<br>5040<br>6054|250 / 482<br>250 / 482<br>260 / 500<br>260 / 500<br>260 / 500<br>260 / 500|2 sec plate 1 / 5 sec off / 2 sec plate 2<br>3 sec plate 1 / 5 sec off / 3 sec plate 2<br>3 sec plate 1 / 5 sec off / 3 sec plate 2<br>5 sec plate 1 / 5 sec off / 5 sec plate 2<br>5 sec plate 1 / 5 sec off / 5 sec plate 2<br>5 secplate 1 / 5 sec off / 5 secplate 2| 13 D ## Recommendation for Processing and Application of SMD Capacitors (Continuation) ## ~~Solder Paste~~ To achieve reliable soldering results one of the following solder alloys have from case to case proven being workable: ## Lead free solder paste Sn - Bi Sn - Zn (Bi) Sn - Ag - Cu (suitable for SMD-PET 5040/ 6054, SMD-PEN and SMD-PPS) Solder paste with lead Sn - Pb - Ag (Sn60-Pb40-A, Sn63-Pb37-A) ## ~~Washing~~ WIMA SMD components with plastic encapsulation - like all other components of similar construction irrespective of the make - cannot be regarded as hermetically sealed. Due to today’s common washing substances, e. g. on aqueous basis instead of the formerly used halogenated hydrocarbons, with enhanced washing efficiency it became obvious that assembled SMD capacitors may show an impermissibly high deviation of the electrical parameters after a corresponding washing process. Hence it is recommended to refrain from applying industrial washing processes for WIMA SMD capacitors in order to avoid possible damages. ## ~~Initial Operation/Calibration~~ Due to the stress which the components are subjected to during processing, reversible parameter changes occur in almost all electronic components. The capacitance recovery accuracy to be expected with careful processing is within a scope of advisable to prolong the storage time to ## t U 10 days In this way ageing effects of the capacitor structure can be anticipated. Parameter changes due to processing are not to be expected after this period of time ## ~~Humidity Protection Bags~~ Taped WIMA SMD capacitors are shipped in humidity protection bags according to JEDEC standard (ESD/EMI-shield/watervapour proof). Under controlled conditions the components can be stored two years and more in the originally sealed bag. Opened packing units should immediately be used up for processing. If storage is necessary the opened packing units should be stored air-tight in the original plastic bag. ## ~~Reliability~~ Taking account of the manufacturer‘s guidelines and compatible processing, the WIMA SMD stand out for the same high quality and reliability as the analogous through-hole WIMA series. The technology of metallized film capacitors used e.g. in WIMA SMD-PET achieves the best values for all fields of application. The expected value is about: ## Û0 T 2 fit Furthermore the production of all WIMA components is subject to the regulations laid down by ISO 9001:2015 as well as the guidelines for component specifications set out by IEC quality assessment system (IECQ) for electronic components. number of other outstanding qualities: - ” favourable pulse rise time - ” low ESR - ” low dielectric absorption - ” available in high voltage series - ” large capacitance spectrum ” stand up to high mechanical stress - ” good long-term stability As regards technical performance as well as quality and reliability, the WIMA SMD series offer the possibility to cover nearly all applications of conventionally through-hole film capacitors with SMD components. Furthermore, the WIMA SMD series can now be used for all the demanding capacitor applications for which, in the past, the use of through-hole components was mandatory: - ” measuring techniques ” oscillator circuits - ” differentiating and integrating circuits - ” A/D or D/A transformers - ” sample and hold circuits ” automotive electronics With the WIMA SMD programme available today, the major part of all plastic film capacitors can be replaced by WIMA SMD components. The field of application ranges from standard coupling capacitors to use in switch-mode power supplies as filter or charging capacitors with high voltage and capacitance values, as well as in telecommunications e.g. the well-known telephone capacitor 1mF/250VDC. ## DC/C T 5 %. For the initial operation of the device a minimum storage time of ## t U 24 hours is to be taken into account. With calibrated devices or when the application is largely dependent on capacitance it is ## Electrical Characteristics and Fields of Application Basically the WIMA SMD series have the same electrical characteristics as the analogous through-hole WIMA capacitors. Compared to ceramic or tantalum dielectrics WIMA SMD capacitors have a 14 D ## Blister Tape Packaging and Packing Units of the WIMA SMD Capacitors **==> picture [528 x 548] intentionally omitted <==** **----- Start of picture text -----**<br> +2<br>Tape reel: W1 - 0 Tape advance and return:<br>Tape return Tape advance Cover film advan<br>10 - 20 empty compartments 10 - 20 empty compartments min. 200 mm<br>Unwinding direction<br>All dims. in mm.<br>W2 max. Type W2max W1± [2] 0 N ±1.5<br>A0 A1 T 1812 19 12.4 62<br>2220 19 12.4 62<br>2824 19 12.4 62<br>4030 22.4 16.4 60<br>5040 30.4 24.4 90<br>P P0 P2 D0 D1 K 6054 30.4 24.4 90<br>Packing units<br>Size Code 1812 ± 0.1A0 A1 ± 0.1B0 B1 + 0.1 D0 + 0.1 D1 ± 0.1P ± 0.1P0* ± 0.05P2 ± 0.1E ± 0.05F G ± 0.3W [W] ± 0.2 [0 ] ± 0.1K ± 0.1T taped Reel taped Reel bulk<br>Box size Code -0 -0 180 mm P 330 mm P Standard<br>4.8 x 3.3 x 3 KA 3.55 3.3 5.1 4.8 P1.5 P1.5 8 4 2 1.75 5.5 2.2 12 9.5 3.4 0.3 700 2500 3000<br>4.8 x 3.3 x 4 KB 3.55 3.3 5.1 4.8 P1.5 P1.5 8 4 2 1.75 5.5 2.2 12 9.5 4.4 0.3 500 2000 3000<br>Size Code 2220 ± 0.1A0 A1 ± 0.1B0 B1 + 0.1 D0 + 0.1 D1 ± 0.1P ± 0.1P0* ± 0.05P2 ± 0.1E ± 0.05F G ± 0.3W [W] ± 0.2 [0 ] ± 0.1K ± 0.1T taped Reel taped Reel bulk<br>Box size Code -0 -0 180 mm P 330 mm P Standard<br>5.7 x 5.1 x 3.5 QA 6.3 5.7 5.6 5.1 P1.5 P1.5 8 4 2 1.75 5.5 1.95 12 9.5 3.7 0.3 500 1800 3000<br>5.7 x 5.1 x 4.5 QB 6.3 5.7 5.6 5.1 P1.5 P1.5 8 4 2 1.75 5.5 1.95 12 9.5 4.7 0.3 400 1500 3000<br>Size Code 2824 ± 0.1A0 A1 ± 0.1B0 B1 + 0.1 D0 + 0.1 D1 ± 0.1P ± 0.1P0* ± 0.05P2 ± 0.1E ± 0.05F G ± 0.3W [W] ± 0.2 [0 ] ± 0.1K ± 0.1T taped Reel bulk<br>Box size Code -0 -0 330 mm P Standard<br>7.2 x 6.1 x 3 TA 6.6 6.1 7.7 7.2 P1.5 P1.5 12 4 2 1.75 5.5 0.9 12 9.5 3.4 0.3 1500 2000<br>7.2 x 6.1 x 5 TB 6.6 6.1 7.7 7.2 P1.5 P1.5 12 4 2 1.75 5.5 0.9 12 9.5 5.4 0.4 750 2000<br>Code ± 0.1A0 [A][1] ± 0.1B0 B1 + 0.1 D0 + 0.1 D1 ± 0.1P ± 0.1 [P][0][* ] ± 0.05P2 ± 0.1E ± 0.05F [G] ± 0.3W [W] ± 0.2 [0 ] ± 0.1K ± 0.1T taped Reel bulk<br>-0 -0 330 mm P Standard<br>Size Code 4030 VA 10.7 10.2 8.1 9.1 P1.5 P1.5 16 4 2 1.75 7.5 1.9 16 13.3 5.5 0.3 775 2000<br>Size Code 5040 XA 13.5 12.7 11 11.5 P1.5 P1.5 16 4 2 1.75 11.5 4.7 24 21.3 6.5 0.3 600 1000<br>Size Code 6054 YA 17.0 16.5 15.6 15.0 P1.5 P1.5 20 4 2 1.75 11.5 2.95 24 21.3 7.5 0.3 450 500<br>* cumulative after 10 steps p 0.2 mm max.p 0.2 mm max. 0.2 mm max. Part number codes for SMD packing<br>0.5 1.5<br>� �<br>13 N<br>180/330<br>G<br>B0 B1 W W0<br>F<br>E<br>+0 - 2<br>**----- End of picture text -----**<br> * cumulative after 10 steps p 0.2 mm max.p 0.2 mm max. 0.2 mm max. Samples and pre-production needs on request or 1 Reel minimum. |Part number codes for SMD packing|Part number codes for SMD packing|Part number codes for SMD packing|| |---|---|---|---| ||||| |W (Blister)<br>12<br>12<br>16<br>24|Pin mm|Code|| ||180|P|| ||330|Q|| ||330|R|| ||330|T|| ||||| |Bulk Standard||S|| ||||| 148 D WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: **==> picture [489 x 138] intentionally omitted <==** **----- Start of picture text -----**<br> Field 1 - 4: Type description<br>Field 5 - 6: Rated voltage<br>Field 7 - 10: Capacitance<br>Field 11 - 12: Size and PCM<br>Field 13 - 14: Version code (e.g. Snubber versions)<br>Field 15: Capacitance tolerance<br>Field 16: Packing<br>Field 17 - 18: Pin length (untaped)<br>1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br>M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D<br>**----- End of picture text -----**<br> |MKS 2|MKS 2|MKS 2|63 VDC|63 VDC|63 VDC||0.01mF|0.01mF|0.01mF|2.5 x 6.5 x 7.2||-|-||20 %<br>bulk|||6|-2| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| ||||||||||||||||||||| |Type description:|||Rated voltage:||||Capacitance:|||Size:|||||Tolerance:||||| |SMD-PET||= SMDT|50 VDC||= B0||22 pF|= 0022||4.8 x 3.3 x 3 Size 1812||= KA|||±20 %<br>= M||||| |SMD-PEN||= SMDN|63 VDC||= C0||47 pF|= 0047||4.8 x 3.3 x 4 Size 1812||= KB|||±10 %<br>= K||||| |SMD-PPS||= SMDI|100 VDC||= D0||100 pF|= 0100||5.7 x 5.1 x 3.5 Size 2220||= QA|||±5 %<br>= J||||| |FKP 02||= FKP0|250 VDC||= F0||150 pF|= 0150||5.7 x 5.1 x 4.5 Size 2220||= QB|||±2.5 %<br>= H||||| |MKS 02||= MKS0|400 VDC||= G0||220 pF|= 0220||7.2 x 6.1 x 3 Size 2824||= TA|||±1 %<br>= E||||| |FKS 2||= FKS2|450 VDC||= H0||330 pF|= 0330||7.2 x 6.1 x 5 Size 2824||= TB|||...||||| |FKP 2||= FKP2|520 VDC||= H2||470 pF|= 0470||10.2 x 7.6 x 5 Size 4030||= VA|||||||| |FKS 3<br>FKP 3||= FKS3<br>= FKP 3|600 VDC<br>630 VDC||= I0<br>= J0||680 pF<br>1000 pF|= 0680<br> = 1100||12.7 x 10.2 x 6 Size 5040 <br>15.3 x 13.7 x 7 Size 6054||= XA<br> = YA|||Packing:||||| |MKS 2||= MKS2|700 VDC||= K0||1500 pF|= 1150||2.5 x 7 x 4.6 PCM 2.5||= 0B|||AMMO H16.5 340 x 340 = A||||| |MKP 2||= MKP2|800 VDC||= L0||2200 pF|= 1220||3 x 7.5 x 4.6 PCM 2.5||= 0C|||AMMO H16.5 490 x 370 = B||||| |MKS 4||= MKS4|850 VDC||= M0||3300 pF|= 1330||2.5 x 6.5 x 7.2 PCM 5||= 1A|||AMMO H18.5 340 x 340 = C||||| |MKP 4C||= MKPC|900 VDC||= N0||4700 pF|= 1470||3 x 7.5 x 7.2 PCM 5||= 1B|||AMMO H18.5 490 x 370 = D||||| |MKP 4||= MKP4|1000 VDC||= O1||6800 pF|= 1680||2.5 x 7 x 10 PCM 7.5||= 2A|||REEL H16.5 360||||= F| |MKP 10||= MKP1|1100 VDC||= P0||0.01mF|= 2100||3 x 8.5 x 10 PCM 7.5||= 2B|||REEL H16.5 500||||= H| |FKP 1||= FKP1|1200 VDC||= Q0||0.022mF|= 2220||3 x 9 x 13 PCM 10||= 3A|||REEL H18.5 360||||= I| |MKP-X2||= MKX2|1250 VDC||= R0||0.047mF|= 2470||4 x 9 x 13 PCM 10||= 3C|||REEL H18.5 500||||= J| |MKP-X1 R||= MKX1|1500 VDC||= S0||0.1mF|= 3100||5 x 11 x 18 PCM 15||= 4B|||ROLL H16.5||||= N| |MKP-Y2||= MKY2|1600 VDC||= T0||0.22mF|= 3220||6 x 12.5 x 18 PCM 15||= 4C|||ROLL H18.5||||= O| |MP 3-X2||= MPX2|2000 VDC||= U0||0.47mF|= 3470||5 x 14 x 26.5 PCM 22.5||= 5A|||BLISTER W12 180||||= P| |MP 3-X1||= MPX1|2500 VDC||= V0||1mF|= 4100||6 x 15 x 26.5 PCM 22.5||= 5B|||BLISTER W12 330||||= Q| |MP 3-Y2||= MPY2|3000 VDC||= W0||2.2mF|= 4220||9 x 19 x 31.5 PCM 27.5||= 6A|||BLISTER W16 330||||= R| |MP 3R-Y2||= MPRY|4000 VDC||= X0||4.7mF|= 4470||11 x21 x 31.5 PCM 27.5||= 6B|||BLISTER W24 330||||= T| |MKP 4F||= MKPF|6000 VDC||= Y0||10mF|= 5100||9 x 19 x 41.5 PCM 37.5||= 7A|||Bulk/TPS Standard||||= S| |Snubber MKP||= SNMP|250 VAC||= 0W||22mF|= 5220||11 x 22 x 41.5 PCM 37.5||= 7B|||...||||| |Snubber FKP||= SNFP|275 VAC||= 1W||47mF|= 5470||19 x 31 x 56 PCM 48.5||= 8D|||||||| |GTO MKP||= GTOM|300 VAC||= 2W||100mF|= 6100||25 x 45 x 57 PCM 52.5||= 9D|||||||| |DC-LINK MKP|3|= DCP3|305 VAC||= AW||220mF|= 6220||...|||||||||| |DC-LINK MKP|4|= DCP4|350 VAC||= BW||1000mF|= 7100|||||||||||| |DC-LINK MKP 4S <br>DC-LINK MKP 5||= DCPS<br> = DCP5|440 VAC<br>500 VAC||= 4W<br>= 5W||1500mF <br>...|= 7150||Version code:|||||Pin length (untaped)||||| |DC-LINK MKP|6|= DCP6|...|||||||Standard<br>= 00|||||3.5 ±0.5 = C9||||| |DC-LINK HC||= DCHC||||||||Version A1<br>= 1A|||||6 -2<br>= SD||||| |DC-LINK HY||= DCHY||||||||Version A1.1.1 = 1B|||||16 ±1<br>= P1||||| |||||||||||Version A2<br>= 2A|||||...||||| |||||||||||...|||||Pin length (taped)||||| ||||||||||||||||none<br>= 00||||| The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 147
Updated at April 26, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →