![SMDTC03470TA00KQ00 — General Purpose Film Capacitor, Metallized PET, 2824 [7260 Metric], 0.47 µF, ± 10%, 40 V, 63 V](/media/5/E/5/7B2C031B035505E5.webp)
Image not available
Illustrative purposes only
SMDTC03470TA00KQ00
General Purpose Film Capacitor, Metallized PET, 2824 [7260 Metric], 0.47 µF, ± 10%, 40 V, 63 V
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: WIMA
- Product type: General Purpose Film Capacitors
- Capacitance:0.47µF; Voltage Rating:63V; Capacitor Dielectric Type:PET (Polyester); Capacitance Tolerance:± 10%; Product R; Available until stocks are exhausted Alternative available
- SVHC: No SVHC (17-Jan-2023)
- Capacitance: 0.47µF
- Voltage(AC): 40V
- Voltage(DC): 63V
- Lead Spacing: -
- Product Range: SMDT Series
- Product Width: 6.1mm
- Qualification: -
- Product Height: 3mm
- Product Length: 3mm
- Dielectric Type: Metallized PET
- Humidity Rating: -
- Capacitor Mounting: Surface Mount
- Capacitor Terminals: Wraparound
- Capacitance Tolerance: ± 10%
- Capacitor Case / Package: 2824 [7260 Metric]
- Operating Temperature Max: 100°C
- Operating Temperature Min: -55°C
| Delivery and price | |
|---|---|
| Units per pack | 1500 |
| Price | 0.428 € |
| Current stock | 1000+ |
| Lead time | 30 days |
Datasheet
ci D ## ~~WIMA SMD-PET~~ ## Metallized Polyester (PET) SMD Film Capacitors with Box Encapsulation ## Special Features ## Electrical Data ## Test voltage: 1.6 Ur, 2 sec. Voltage derating: - ˜ Size codes 1812, 2220, 2824, 4030, 5040 and 6054 with PET and encapsulated Capacitance range: 0.01 mF to 6.8 mF Rated voltages: 63 VDC, 100 VDC, 250 VDC, 400 VDC, 630 VDC, 1000 VDC Capacitance tolerances: A voltage derating factor of 1.25 % per K must be applied from +85) C for DC voltages and from +75) C for AC voltages ˜ Operating temperature up to 100° C - ˜ Self-healing - ˜ According to RoHS 2011/65/EU ±20%, ±10% (±5% available subject to special enquiry) Reliability: Operational life 300 000 hours Failure rate 2 fit (0.5 x Ur and 40+ C) ## ~~Typical Applications~~ ## Operating temperature range: –55+ C to +100+ C (+125° C available subject to special enquiry) Climatic test category: For general DC-applications e.g. ˜ By-pass - ˜ Blocking ˜ Coupling and decoupling 55/100/21 according to IEC ˜ Timing for size codes 1812 to 2824 55/100/56 according to IEC for size codes 4030 to 6054 ~~Construction~~ Insulation resistance at +20+ C: Dielectric: Ur Utest C 0.33 mF 0.33 mF < C 6.8 mF Polyethylene-terephthalate (PET) film 63 VDC 50 V 3.75 x 10[3] M¸ 1250 sec (M¸ x mF) Capacitor electrodes: 100 VDC 100 V (mean value: 1 x 10[4] M¸) (mean value: 3000 sec) Vacuum-deposited Internal construction: 250 VDC 100 V 1 x 10[4] M¸ 3000 sec (M¸ x mF) (mean value: 5 x 10[4] M¸) (mean value: 10 000 sec) Measuring time: 1 min. Dissipation factors at +20) C: tan d Plastic film at f C 0.1 mF 0.1 mF < C 1.0 mF C > 1.0 mF Vacuum-deposited electrode 1 kHz 8 x 10[-3] 8 x 10[-3] 10 x 10[-3] Metal contact layer (schoopage) 10 kHz 15 x 10[-3] 15 x 10[-3] – 100 kHz 30 x 10[-3] – – Terminating plate Maximum pulse rise time: for pulses equal to the rated voltage ~~eB SSS———~~ Pulse rise time V/msec Capacitance Encapsulation: max. operation/test mF Solvent-resistant, flame-retardant plastic 63 VDC 100 VDC 250 VDC 400 VDC 630 VDC 1000 VDC case, UL 94 V-0 0.01 ... 0.022 30/300 35/350 40/400 35/350 40/400 50/500 Terminations: 0.033 ... 0.068 20/200 20/200 40/400 21/210 25/250 32/320 Tinned plates. 0.1 ... 0.22 10/100 10/100 12/120 14/140 17/170 – Marking: 0.33 ... 0.68 8/80 6/60 9/90 10/100 – – Box colour: Black. 1.0 ... 2.2 3.5/35 4/40 7/70 – – – 3.3 ... 6.8 3/30 3/30 – – – – ~~Bannan Dip Solder Test/Processing Packing~~ Resistance to soldering heat: Available taped and reeled in 12 mm Test Tb in accordance with DIN IEC blister pack. 60068-2-58/DIN EN 60384-19. Soldering bath temperature max. 260+ C. Detailed taping information and graphs Soldering duration max. 5 sec. at the end of the catalogue. Change in capacitance DC/C 5 %. Soldering process: Re-flow soldering (see temperature/time For further details and graphs please graphs page 12). refer to Technical Information. 16 D ## ~~WIMA SMD-PET~~ ## Continuation |D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~| |---|---|---|---|---|---|---|---|---|---| |Continuation<br>~~-~~|||||||||| |General Data|||||||||| ||||||||||| |Capacitance|63 VDC/40 VAC*<br>Size<br>H<br>Part number<br>code ± 0.3|||100 VDC/63 VAC*<br>Size<br>H<br>Part number<br>code ± 0.3|||Size<br>code|250 VDC/160 VAC*<br>H<br>Part number<br>± 0.3|| |0.01mF|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02100KA00_ _ _ _<br>SMDTC02100QA00_ _ _ _<br>SMDTC02100TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02100KA00_ _ _ _<br>SMDTD02100QA00_ _ _ _<br>SMDTD02100TA00_ _ _ _|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTF02100KB00_ _ _ _<br>SMDTF02100QA00_ _ _ _<br>SMDTF02100TA00_ _ _ _| |0.015 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02150KA00_ _ _ _<br>SMDTC02150QA00_ _ _ _<br>SMDTC02150TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02150KA00_ _ _ _<br>SMDTD02150QA00_ _ _ _<br>SMDTD02150TA00_ _ _ _|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTF02150KB00_ _ _ _<br>SMDTF02150QA00_ _ _ _<br>SMDTF02150TA00_ _ _ _| |0.022 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02220KA00_ _ _ _<br>SMDTC02220QA00_ _ _ _<br>SMDTC02220TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02220KA00_ _ _ _<br>SMDTD02220QA00_ _ _ _<br>SMDTD02220TA00_ _ _ _|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTF02220KB00_ _ _ _<br>SMDTF02220QA00_ _ _ _<br>SMDTF02220TA00_ _ _ _| |0.033 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02330KA00_ _ _ _<br>SMDTC02330QA00_ _ _ _<br>SMDTC02330TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02330KA00_ _ _ _<br>SMDTD02330QA00_ _ _ _<br>SMDTD02330TA00_ _ _ _|2220<br>2824<br>4030|3.5<br>3.0<br>5.0|SMDTF02330QA00_ _ _ _<br>SMDTF02330TA00_ _ _ _<br>SMDTF02330VA00_ _ _ _| |0.047 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02470KA00_ _ _ _<br>SMDTC02470QA00_ _ _ _<br>SMDTC02470TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02470KA00_ _ _ _<br>SMDTD02470QA00_ _ _ _<br>SMDTD02470TA00_ _ _ _|2220<br>2824<br>4030|3.5<br>3.0<br>5.0|SMDTF02470QA00_ _ _ _<br>SMDTF02470TA00_ _ _ _<br>SMDTF02470VA00_ _ _ _| |0.068 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC02680KA00_ _ _ _<br>SMDTC02680QA00_ _ _ _<br>SMDTC02680TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD02680KA00_ _ _ _<br>SMDTD02680QA00_ _ _ _<br>SMDTD02680TA00_ _ _ _|2220<br>2824<br>4030|3.5<br>3.0<br>5.0|SMDTF02680QA00_ _ _ _<br>SMDTF02680TA00_ _ _ _<br>SMDTF02680VA00_ _ _ _| |0.1mF|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC03100KA00_ _ _ _<br>SMDTC03100QA00_ _ _ _<br>SMDTC03100TA00_ _ _ _|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTD03100KA00_ _ _ _<br>SMDTD03100QA00_ _ _ _<br>SMDTD03100TA00_ _ _ _|2220<br>2824<br>4030|3.5<br>5.0<br>5.0|SMDTF03100QA00_ _ _ _<br>SMDTF03100TB00_ _ _ _<br>SMDTF03100VA00_ _ _ _| |0.15 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC03150KA00_ _ _ _<br>SMDTC03150QA00_ _ _ _<br>SMDTC03150TA00_ _ _ _|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTD03150KB00_ _ _ _<br>SMDTD03150QA00_ _ _ _<br>SMDTD03150TA00_ _ _ _|2220<br>2824<br>4030|4.5<br>5.0<br>5.0|SMDTF03150QB00_ _ _ _<br>SMDTF03150TB00_ _ _ _<br>SMDTF03150VA00_ _ _ _| |0.22 „|1812<br>2220<br>2824|3.0<br>3.5<br>3.0|SMDTC03220KA00_ _ _ _<br>SMDTC03220QA00_ _ _ _<br>SMDTC03220TA00_ _ _ _|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTD03220KB00_ _ _ _<br>SMDTD03220QA00_ _ _ _<br>SMDTD03220TA00_ _ _ _|2220<br>2824<br>4030|4.5<br>5.0<br>5.0|SMDTF03220QB00_ _ _ _<br>SMDTF03220TB00_ _ _ _<br>SMDTF03220VA00_ _ _ _| |0.33 „|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTC03330KB00_ _ _ _<br>SMDTC03330QA00_ _ _ _<br>SMDTC03330TA00_ _ _ _|2220<br>2824<br>4030|4.5<br>5.0<br>5.0|SMDTD03330QB00_ _ _ _<br>SMDTD03330TB00_ _ _ _<br>SMDTD03330VA00_ _ _ _|<br>2824<br>4030<br>5040|5.0<br>5.0<br>6.0|SMDTF03330TB00_ _ _ _<br>SMDTF03330VA00_ _ _ _<br>SMDTF03330XA00_ _ _ _| |0.47 „|1812<br>2220<br>2824|4.0<br>3.5<br>3.0|SMDTC03470KB00_ _ _ _<br>SMDTC03470QA00_ _ _ _<br>SMDTC03470TA00_ _ _ _|2220<br>2824<br>4030|4.5<br>5.0<br>5.0|SMDTD03470QB00_ _ _ _<br>SMDTD03470TB00_ _ _ _<br>SMDTD03470VA00_ _ _ _|<br>4030<br>5040|5.0<br>6.0|SMDTF03470VA00_ _ _ _<br>SMDTF03470XA00_ _ _ _| |0.68 „|2220<br>2824<br>4030|4.5<br>3.0<br>5.0|SMDTC03680QB00_ _ _ _<br>SMDTC03680TA00_ _ _ _<br>SMDTC03680VA00_ _ _ _|2824<br>4030<br>5040|5.0<br>5.0<br>6.0|SMDTD03680TB00_ _ _ _<br>SMDTD03680VA00_ _ _ _<br>SMDTD03680XA00_ _ _ _|5040|6.0|SMDTF03680XA00_ _ _ _| |1.0mF|2220<br>2824<br>4030|4.5<br>3.0<br>5.0|SMDTC04100QB00_ _ _ _<br>SMDTC04100TA00_ _ _ _<br>SMDTC04100VA00_ _ _ _|2824<br>4030<br>5040|5.0<br>5.0<br>6.0|SMDTD04100TB00_ _ _ _<br>SMDTD04100VA00_ _ _ _<br>SMDTD04100XA00_ _ _ _|6054|7.0|SMDTF04100YA00_ _ _ _| |1.5 „|2824<br>4030|5.0<br>5.0|SMDTC04150TB00_ _ _ _<br>SMDTC04150VA00_ _ _ _|4030<br>5040|5.0<br>6.0|SMDTD04150VA00_ _ _ _<br>SMDTD04150XA00_ _ _ _||Part number completion:<br>Tolerance:<br>20 % = M<br>10 % = K<br>5 % = J<br>Packing:<br>bulk = S<br>Pin length: none = 00<br>Taped version see page 127.|| |2.2 „|2824<br>4030|5.0<br>5.0|SMDTC04220TB00_ _ _ _<br>SMDTC04220VA00_ _ _ _|5040|6.0|SMDTD04220XA00_ _ _ _|||| |3.3 „|4030|5.0|SMDTC04330VA00_ _ _ _|5040|6.0|SMDTD04330XA00_ _ _ _|||| |||||||||Part number completion:|| |||||||||Tolerance:<br>20 % = M<br>10 % = K<br>5 % = J<br>Packing:<br>bulk = S<br>Pin length: none = 00<br>Taped version see page 127.|| |4.7 „|5040|6.0|SMDTC04470XA00_ _ _ _|6054|7.0|SMDTD04470YA00_ _ _ _|||| |6.8 „|6054|7.0|SMDTC04680YA00_ _ _ _||||||| |* AC voltage: f =50 Hz; 1.4 x Urms+ UDC Ur<br>Dims. in mm.<br>Rights reserved to amend design data without prior notification.|||||||||| * AC voltage: f = 50 Hz; 1.4 x Urms + UDC Ur Dims. in mm. Rights reserved to amend design data without prior notification. Continuation page 18 17 D ## ~~WIMA SMD-PET~~ ## Continuation ## General Data |D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~|D<br>~~WIMA SMDPET~~| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| |Continuation<br>General Data<br>~~-~~||||||||||||||||| |Capacitance|400 VDC/200 VAC*<br>Size<br>H<br>Part number<br>code<br>± 0.3|||630 VDC/300 VAC*<br>Size<br>H<br>Part number<br>code<br>± 0.3||||||||||1000 VDC/400 VAC*<br>Size<br>H<br>Part number<br>code<br>± 0.3||| |0.01mF|2824<br>4030|3.0<br>5.0|SMDTG02100TA00_ _ _ _<br>SMDTG02100VA00_ _ _ _|4030|<br>5.0|||SMDTJ02100VA00_ _ _ _||||||||| |0.015 „|2824<br>4030|3.0<br>5.0|SMDTG02150TA00_ _ _ _<br>SMDTG02150VA00_ _ _ _|4030|<br>5.0|||SMDTJ02150VA00_ _ _ _||||||5040|6.0|SMDTO12150XA00_ _ _ _| |0.022 „|2824<br>4030|3.0<br>5.0|SMDTG02220TA00_ _ _ _<br>SMDTG02220VA00_ _ _ _|5040|<br>6.0|||SMDTJ02220XA00_ _ _ _||||||5040|6.0|SMDTO12220XA00_ _ _ _| |0.033 „|2824<br>4030|5.0<br>5.0|SMDTG02330TB00_ _ _ _<br>SMDTG02330VA00_ _ _ _|5040|<br>6.0|||SMDTJ02330XA00_ _ _ _||||||5040|6.0|SMDTO12330XA00_ _ _ _| |0.047 „|2824<br>4030|5.0<br>5.0|SMDTG02470TB00_ _ _ _<br>SMDTG02470VA00_ _ _ _|5040|<br>6.0|||SMDTJ02470XA00_ _ _ _||||||6054|7.0|SMDTO12470YA00_ _ _ _| |0.068 „|4030<br>5040|5.0<br>6.0|SMDTG02680VA00_ _ _ _<br>SMDTG02680XA00_ _ _ _|5040|<br>6.0|||SMDTJ02680XA00_ _ _ _||||||||| |0.1mF|4030<br>5040|5.0<br>6.0|SMDTG03100VA00_ _ _ _<br>SMDTG03100XA00_ _ _ _|6054|<br>7.0|||SMDTJ03100YA00_ _ _ _||||||||| |0.15 „|4030<br>5040|5.0<br>6.0|SMDTG03150VA00_ _ _ _<br>SMDTG03150XA00_ _ _ _|6054|<br>7.0|||SMDTJ03150YA00_ _ _ _||||||||| |0.22 „|5040|6.0|SMDTG03220XA00_ _ _ _|6054|<br>7.0|||SMDTJ03220YA00_ _ _ _||||||||| |0.33 „|5040|6.0|SMDTG03330XA00_ _ _ _|||||||||||||| |0.47 „|6054|7.0|SMDTG03470YA00_ _ _ _|||||||||||||| |* AC voltage: f =50 Hz; 1.4 x Urms+ UDC Ur<br>Dims. in mm.<br>The values of the WIMA SMD-PEN range according to<br>the main catalogue 2009 are still available on request.<br> <br> <br> <br> <br> <br> <br> <br><br>||||Solder pad<br>H<br>L<br>d<br>d<br>Bonding slit|||recommendation<br>W<br>b<br>c<br>a|||||||Part number completion:<br>Tolerance:<br>20 % = M<br>10 % = K<br>5 % = J<br>Packing:<br>bulk = S<br>Pin length: none = 00<br>Taped version see page 127.||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||||||||||||||| |||||Size<br>code||L<br>±0.3||W<br>±0.3||d|a<br>min.|b<br>min.|c<br>max.|||| |||||1812<br>2220<br>2824<br>4030<br>5040<br>6054||4.8<br>5.7<br>7.2<br>10.2<br>12.7<br>15.3||3.3<br>5.1<br>6.1<br>7.6<br>10.2<br>13.7|0.5<br>0.5<br>0.5<br>0.5<br>0.7<br>0.7||1.2<br>1.2<br>1.2<br>2.5<br>2.5<br>2.5|3.5<br>4<br>4<br>6<br>6<br>6|3.5<br>4.5<br>6.5<br>9 <br>11.5<br>14|||| |Rights reserved to amend design data without prior notification.||||||||||||||||| Rights reserved to amend design data without prior notification. 18 D Recommendation for Processing and Application of SMD Capacitors ## ~~Layout Form~~ The components can generally be positioned on the carrier material as desired. In order to prevent soldering shadows or ensure regular temperature distribution, extreme concentration of the components should be avoided. In practice, it has proven best to keep a minimum distance of the soldering surfaces between two WIMA SMDs of twice the height of the components. ## ~~Soldering Process~~ ## Re-flow soldering ## ~~Solder Pad Recommendation~~ W b H _ i nd a d ali L c d |SS le Bonding slit [_] Size L W d a b c code ± 0.3 ± 0.3 min. min. max. 1812 4.8 3.3 0.5 1.2 3.5 3.5 2220 5.7 5.1 0.5 1.2 4 4.5 2824 7.2 6.1 0.5 1.2 4 6.5 4030 10.2 7.6 0.5 2.5 6 9 5040 12.7 10.2 0.7 2.5 6 11.5 6054 15.3 13.7 0.7 2.5 6 14 ~~THAT~~ The solder pad size recommendations given for each individual series are to be understood as minimum dimensions which can at any time be adjusted to the layout form. ## ~~Processing~~ The processing of SMD components ## – assembling – soldering ## – electrical final inspection/ calibrating must be regarded as a complete process. The soldering of the printed circuit board, for example, can constitute considerable stress on all the electronic components. The manufacturer‘s instructions on the processing of the components are mandatory. - Temperature/time graph for the permissible processing temperature of the WIMA SMD film capacitor for typical convection soldering processes. Due to versatile procedures exact processing parameters for re-flow soldering processes cannot be specified. The graph tt 6054 _|250°C Due to versatile procedures exact proin practice at the user. During processing cessing parameters for re-flow soldering a max. temperature of T=210° C inside the processes cannot be specified. The graph component should not be exceeded. Due depicted is to be understood as a recomto the differing heat absorption the length mendation to help establishing a suitable of the soldering process should be kept as soldering profile fulfilling the requirements short as possible for smaller size codes. ## ~~SMD Handsoldering~~ The below data are to be regarded as guideline values and should serve to avoid damage to the dielectric caused by excessive heat during the soldering process. The soldering quality depends on the tool used and on the skill and experience of the person with the soldering iron in hand. WIMA SMD capacitors with plastic film dielectric are generally suitable for handsoldering, e. g. for lab purposes, with a soldering iron where, however, similar to automated soldering processes, a certain duration and temperature should not be exceeded. These parameters are dependent on the physical size of the components and the relevant heat absorption involved. |Size code|Temperature ° C / ° F|Time duration| |---|---|---| |1812<br>2220<br>2824<br>4030<br>5040<br>6054|250 / 482<br>250 / 482<br>260 / 500<br>260 / 500<br>260 / 500<br>260 / 500|2 sec plate 1 / 5 sec off / 2 sec plate 2<br>3 sec plate 1 / 5 sec off / 3 sec plate 2<br>3 sec plate 1 / 5 sec off / 3 sec plate 2<br>5 sec plate 1 / 5 sec off / 5 sec plate 2<br>5 sec plate 1 / 5 sec off / 5 sec plate 2<br>5 secplate 1 / 5 sec off / 5 secplate 2| 12 D ## Recommendation for Processing and Application of SMD Capacitors (Continuation) ## ~~Solder Paste~~ To achieve reliable soldering results one of the following solder alloys have from case to case proven being workable: ## Lead free solder paste Sn - Bi Sn - Zn (Bi) Sn - Ag - Cu (suitable for SMD-PET 5040/ 6054 and SMD-PPS) ## Solder paste with lead Sn - Pb - Ag (Sn60-Pb40-A, Sn63-Pb37-A) ## ~~Washing~~ WIMA SMD components with plastic encapsulation - like all other components of similar construction irrespective of the make - cannot be regarded as hermetically sealed. Due to today’s common washing substances, e. g. on aqueous basis instead of the formerly used halogenated hydrocarbons, with enhanced washing efficiency it became obvious that assembled SMD capacitors may show an impermissibly high deviation of the electrical parameters after a corresponding washing process. Hence it is recommended to refrain from applying industrial washing processes for WIMA SMD capacitors in order to avoid possible damages. ## ~~Initial Operation/Calibration~~ Due to the stress which the components are subjected to during processing, reversible parameter changes occur in almost all electronic components. The capacitance recovery accuracy to be expected with careful processing is within a scope of advisable to prolong the storage time to ## t 10 days In this way ageing effects of the capacitor structure can be anticipated. Parameter changes due to processing are not to be expected after this period of time ## ~~Humidity Protection Bags~~ Taped WIMA SMD capacitors are shipped in humidity protection bags according to JEDEC standard (ESD/EMI-shield/watervapour proof). Under controlled conditions the components can be stored two years and more in the originally sealed bag. Opened packing units should immediately be used up for processing. If storage is necessary the opened packing units should be stored air-tight in the original plastic bag. ## ~~Reliability~~ Taking account of the manufacturer‘s guidelines and compatible processing, the WIMA SMD stand out for the same high quality and reliability as the analogous through-hole WIMA series. The technology of metallized film capacitors used e.g. in WIMA SMD-PET achieves the best values for all fields of application. The expected value is about: ## Û0 2 fit Furthermore the production of all WIMA components is subject to the regulations laid down by ISO 9001:2008 as well as the guidelines for component specifications set out by IEC quality assessment system (IECQ) for electronic components. number of other outstanding qualities: ## ” favourable pulse rise time ” low ESR ” low dielectric absorption ## ” available in high voltage series ## ” large capacitance spectrum ” stand up to high mechanical stress ” good long-term stability As regards technical performance as well as quality and reliability, the WIMA SMD series offer the possibility to cover nearly all applications of conventionally through-hole film capacitors with SMD components. Furthermore, the WIMA SMD series can now be used for all the demanding capacitor applications for which, in the past, the use of through-hole components was mandatory: ” measuring techniques ” oscillator circuits ” differentiating and integrating circuits ” A/D or D/A transformers ” sample and hold circuits ” automotive electronics With the WIMA SMD programme available today, the major part of all plastic film capacitors can be replaced by WIMA SMD components. The field of application ranges from standard coupling capacitors to use in switch-mode power supplies as filter or charging capacitors with high voltage and capacitance values, as well as in telecommunications e.g. the well-known telephone capacitor 1mF/250VDC. ## DC/C 5 %. For the initial operation of the device a minimum storage time of ## t 24 hours is to be taken into account. With calibrated devices or when the application is largely dependent on capacitance it is ## Electrical Characteristics and Fields of Application Basically the WIMA SMD series have the same electrical characteristics as the analogous through-hole WIMA capacitors. Compared to ceramic or tantalum dielectrics WIMA SMD capacitors have a 13 D ## Blister Tape Packaging and Packing Units of the WIMA SMD Capacitors ||D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit|D<br>Blit T Pki d Pki Uit| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| ||ser ape acagng an acng ns<br>of the WIMA SMD Capacitors|||||||||||||||||||||||||||||||||| ||P<br>Tape reel:||||A|||||13 0.5<br>�<br><br>||N 1.5<br>�<br>180/330<br>+0<br>- 2<br>+2<br>- 0<br>W1<br>W max.<br>2||||||F<br>W<br>E<br>G||||||10 - 20 empty compartment<br>Tape return<br>Tape advance||||s<br>and|10 - 20 empty compartments<br>min. 200 mm<br>Tape advance<br>Unwinding direction<br>Cover film advan<br>All dims. in mm.<br>Type<br>W2max<br>W1±2<br>0<br>N ±1.5<br>1812<br>19<br>12.4<br>62<br>2220<br>19<br>12.4<br>62<br>2824<br>19<br>12.4<br>62<br>4030<br>22.4<br>16.4<br>60<br>5040<br>30.4<br>24.4<br>90<br>6054<br>30.4<br>24.4<br>90<br>Packing units<br>return:|||||| |||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||W0<br>T<br>K||||||||||| |||||||||||||||||||||||||||||||||||| |||||||0||||||||||||||||||||||||||||| |||||||||A1||||||||||||||||||||||||||| ||||P|||||||P2||D0<br>D1||||||||||||||||||||||| ||||||||B0|||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||| ||Size Code 1812|||A0<br>± 0.1||A1||B0<br>± 0.1|B1|D0<br>+ 0.1<br>-0|D1<br>+ 0.1<br>-0<br>||P<br>± 0.1|P0*<br>± 0.1||P2<br>± 0.05||E<br>± 0.1||F<br>± 0.05||G||W<br>± 0.3|W0<br>± 0.2||K<br>± 0.1||taped<br>Reel<br>180 mmP|taped<br>Reel<br>330 mmP||bulk<br>Standard||| ||Box size|Code||||||||||||||||||||||||||||||||| ||4.8 x 3.3 x 3|KA||3.55||3.3||5.1|4.8|P1.5|P1.5||8|4||2||1.75||5.5||2.2||12|9.5||3.4||700|2500||3000||| ||4.8 x 3.3 x 4|KB||3.55||3.3||5.1|4.8|P1.5|P1.5||8|4||2||1.75||5.5||2.2||12|9.5||4.4||500|2000||3000||| |||||||||||||||||||||||||||||||||||| ||Size Code 2220|||A0<br>± 0.1||A1||B0<br>± 0.1|B1|D0<br>+ 0.1<br>-0|D1<br>+ 0.1<br>-0<br>||P<br>± 0.1|P0*<br>± 0.1||P2<br>± 0.05||E<br>± 0.1||F<br>± 0.05||G||W<br>± 0.3|W0<br>± 0.2||K<br>± 0.1||taped<br>Reel<br>180 mmP|taped<br>Reel<br>330 mmP||bulk<br>Standard||| ||Box size|Code||||||||||||||||||||||||||||||||| ||5.7 x 5.1 x 3.5|QA||6.3||5.7||5.6|5.1|P1.5|P1.5||8|4||2||1.75||5.5||1.95||12|9.5||3.7||500|1800||3000||| ||5.7 x 5.1 x 4.5|QB||6.3||5.7||5.6|5.1|P1.5|P1.5||8|4||2||1.75||5.5||1.95||12|9.5||4.7||400|1500||3000||| |||||||||||||||||||||||||||||||||||| ||Size Code 2824|||A0<br>± 0.1||A1||B0<br>± 0.1|B1|D0<br>+ 0.1<br>-0|D1<br>+ 0.1<br>-0<br>||P<br>± 0.1|P0*<br>± 0.1||P2<br>± 0.05||E<br>± 0.1||F<br>± 0.05||G||W<br>± 0.3|W0<br>± 0.2||K<br>± 0.1||taped<br>Reel<br>330 mmP|||bulk<br>Standard||| ||Box size|Code||||||||||||||||||||||||||||||||| ||7.2 x 6.1 x 3|TA||6.6||6.1||7.7|7.2|P1.5|P1.5||12|4||2||1.75||5.5||0.9||12|9.5||3.4||1500|||2000||| ||7.2 x 6.1 x 5|TB||6.6||6.1||7.7|7.2|P1.5|P1.5||12|4||2||1.75||5.5||0.9||12|9.5||5.4||750|||2000||| |||||||||||||||||||||||||||||||||||| |||||Code||A0<br>± 0.1||A1|B0<br>± 0.1|B1|D0<br>+ 0.1<br>-0<br>D<br>+<br>-||1<br>0.1<br>0<br>P<br>± 0.1||P0*<br>± 0.1||P2<br>± 0.05||E<br>± 0.1||F<br>± 0.05||G|W<br>± 0.3||W0<br>± 0.2|<br>K<br>± 0.1||taped<br>Reel<br>330 mmP|||bulk<br>Standard||| ||Size Code 4030|||VA||10.7||10.2|8.1|9.1|P1.5 P||1.5 16||4||2||1.75||7.5||1.9|16||13.3|5.5||775|||2000||| ||Size Code 5040|||XA||13.5||12.7|11|11.5|P1.5 P||1.5 16||4||2||1.75||11.5||4.7|24||21.3|6.5||600|||1000||| ||Size Code 6054|||YA||17.0||16.5|15.6|15.0|P1.5 P||1.5 20||4||2||1.75||11.5||2.95|24||21.3|7.5||450|||500||| |||||||||||||||||||||||||||||||||||| ||* cumulative after 10 stepsp0.2 mm max.<br>Samples and pre-production needs on request or 1 Reel minimum.||||||||||||||||||||||||||||Part number codes for SMD packing|||||| ||||||||||||||||||||||||||||||W (Blister)<br>12<br>12<br>16<br>24||Pin mm||Code|| ||||||||||||||||||||||||||||||||180||P|| ||||||||||||||||||||||||||||||||330||Q|| ||||||||||||||||||||||||||||||||330||R|| ||||||||||||||||||||||||||||||||330||T|| |||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||Bulk Standard||||S|| |||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||| 127 D ## WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4: Type description Field 5 - 6: Rated voltage Field 7 - 10: Capacitance Field 11 - 12: Size and PCM Field 13 - 14: Version code (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17 - 18: Pin length (untaped) **==> picture [490 x 38] intentionally omitted <==** **----- Start of picture text -----**<br> 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18<br>M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D<br>**----- End of picture text -----**<br> |MKS 2|MKS 2|MKS 2|63 VDC|63 VDC|63 VDC||0.01mF|0.01mF|0.01mF|2.5 x 6.5 x 7.2||-|-||20 %<br>bulk|||6|-2| |---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---| ||||||||||||||||||||| |Type description:|||Rated voltage:||||Capacitance:|||Size:|||||Tolerance:||||| |SMD-PET||= SMDT|50 VDC||= B0||22 pF|= 0022||4.8 x 3.3 x 3 Size 1812||= KA|||±20 %<br>= M||||| |SMD-PPS||= SMDI|63 VDC||= C0||47 pF|= 0047||4.8 x 3.3 x 4 Size 1812||= KB|||±10 %<br>= K||||| |FKP 02||= FKP0|100 VDC||= D0||100 pF|= 0100||5.7 x 5.1 x 3.5 Size 2220||= QA|||±5 %<br>= J||||| |MKS 02||= MKS0|250 VDC||= F0||150 pF|= 0150||5.7 x 5.1 x 4.5 Size 2220||= QB|||±2.5 %<br>= H||||| |FKS 2||= FKS2|400 VDC||= G0||220 pF|= 0220||7.2 x 6.1 x 3 Size 2824||= TA|||±1 %<br>= E||||| |FKP 2||= FKP2|450 VDC||= H0||330 pF|= 0330||7.2 x 6.1 x 5 Size 2824||= TB|||...||||| |MKS 2||= MKS2|600 VDC||= I0||470 pF|= 0470||10.2 x 7.6 x 5 Size 4030||= VA|||||||| |MKP 2<br>FKS 3||= MKP2<br>= FKS3|630 VDC<br>700 VDC||= J0<br>= K0||680 pF<br>1000 pF|= 0680<br> = 1100||12.7 x 10.2 x 6 Size 5040 <br>15.3 x 13.7 x 7 Size 6054||= XA<br> = YA|||Packing:||||| |FKP 3||= FKP3|800 VDC||= L0||1500 pF|= 1150||2.5 x 7 x 4.6 PCM 2.5||= 0B|||AMMO H16.5 340 x 340 = A||||| |MKS 4||= MKS4|850 VDC||= M0||2200 pF|= 1220||3 x 7.5 x 4.6 PCM 2.5||= 0C|||AMMO H16.5 490 x 370 = B||||| |MKP 4||= MKP4|900 VDC||= N0||3300 pF|= 1330||2.5 x 6.5 x 7.2 PCM 5||= 1A|||AMMO H18.5 340 x 340 = C||||| |MKP 10||= MKP1|1000 VDC||= O1||4700 pF|= 1470||3 x 7.5 x 7.2 PCM 5||= 1B|||AMMO H18.5 490 x 370 = D||||| |FKP 4||= FKP4|1100 VDC||= P0||6800 pF|= 1680||2.5 x 7 x 10 PCM 7.5||= 2A|||REEL H16.5 360||||= F| |FKP 1||= FKP1|1200 VDC||= Q0||0.01mF|= 2100||3 x 8.5 x 10 PCM 7.5||= 2B|||REEL H16.5 500||||= H| |MKP-X2||= MKX2|1250 VDC||= R0||0.022mF|= 2220||3 x 9 x 13 PCM 10||= 3A|||REEL H18.5 360||||= I| |MKP-X2 R||= MKXR|1500 VDC||= S0||0.047mF|= 2470||4 x 9 x 13 PCM 10||= 3C|||REEL H18.5 500||||= J| |MKP-Y2||= MKY2|1600 VDC||= T0||0.1mF|= 3100||5 x 11 x 18 PCM 15||= 4B|||ROLL H16.5||||= N| |MP 3-X2||= MPX2|2000 VDC||= U0||0.22mF|= 3220||6 x 12.5 x 18 PCM 15||= 4C|||ROLL H18.5||||= O| |MP 3-X1||= MPX1|2500 VDC||= V0||0.47mF|= 3470||5 x 14 x 26.5 PCM 22.5||= 5A|||BLISTER W12 180||||= P| |MP 3-Y2||= MPY2|3000 VDC||= W0||1mF|= 4100||6 x 15 x 26.5 PCM 22.5||= 5B|||BLISTER W12 330||||= Q| |MP 3R-Y2||= MPRY|4000 VDC||= X0||2.2mF|= 4220||9 x 19 x 31.5 PCM 27.5||= 6A|||BLISTER W16 330||||= R| |Snubber MKP||= SNMP|6000 VDC||= Y0||4.7mF|= 4470||11 x21 x 31.5 PCM 27.5||= 6B|||BLISTER W24 330||||= T| |Snubber FKP||= SNFP|250 VAC||= 0W||10mF|= 5100||9 x 19 x 41.5 PCM 37.5||= 7A|||Bulk/TPS Standard||||= S| |GTO MKP||= GTOM|275 VAC||= 1W||22mF|= 5220||11 x 22 x 41.5 PCM 37.5||= 7B|||...||||| |DC-LINK MKP|3|= DCP3|300 VAC||= 2W||47mF|= 5470||94 x 49 x 182 DCH_||= H0|||||||| |DC-LINK MKP|4|= DCP4|400 VAC||= 3W||100mF|= 6100||94 x 77 x 182 DCH_||= H1|||||||| |DC-LINK MKP 4S||= DCPS|440 VAC||= 4W||220mF|= 6220||...|||||||||| |DC-LINK MKP|5|= DCP5|500 VAC||= 5W||1000mF|= 7100|||||||||||| |DC-LINK MKP|6|= DCP6|...||||...||||||||||||| |DC-LINK HC||= DCH_||||||||Version code:|||||||||| |DC-LINK HY||= DCHY||||||||Standard<br>= 00|||||Pin length (untaped)||||| |||||||||||Version A1<br>= 1A|||||3.5 ±0.5 = C9||||| |||||||||||Version A1.1.1 = 1B|||||6 -2<br>= SD||||| |||||||||||Version A2<br>= 2A|||||16 ±1<br>= P1||||| |||||||||||...|||||...||||| The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 126
Updated at April 26, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →