SLC2.5N-10W

KUT2.5N - Product Details 

|~~hee~~|**General Information**<br>~~hee~~|
|---|---|
|Company|Elmex Group|
|Product Category|Terminal Blocks|
|Product Group|Feed Through Terminal Blocks|
|Connection Method|Screw Connection|



## **Product Data** ~~hee~~ 

|~~hee~~|**Product Data**<br>~~hee~~|
|---|---|
|Product Name|KUT2.5N|
|Product Image|FT<br>eee|
|Line Diagram|O——O|
|Short Description|Feed Through Terminal Block - Screw Connection|
|Full Description|Terminal Type - KUT2.5N , Feed-through terminal block for photo voltaic<br>applications, nominal voltage: 1000 V, nominal current: 24 A,<br>connection method: Screw connection, number of connections: 2, cross<br>section: 0.5 mm² - 4 mm², AWG: 20 - 12, width: 5 mm , length: 44.25<br>mm , height : 51 mm , mounting type: NS 35/7.5,  NS 35/15 , NS 32/15|
|Approvals|&)C€AL AY|
|Standard Colour|Gray|
|Colour Variants|Black , Blue , Green , Khakhi , Red , Yellow ,|



|~~iii~~|**Key Commercial Data**<br>~~iii~~|
|---|---|
|Standard Weight|0.81 Kg|
|Weight per Piece (excluding packing)|7.3 g|
|Packing Unit|100 pc|
|Minimum Order Quantity|100 pc|
|GTIN Number|85389000|
|Country Of Origin|INDIA|



**Technical Data - General** ~~hee~~ 

Number of levels 

1 

_**1**_ 

|Number of connections|2|
|---|---|
|Potentials|1|
|Nominal cross section|2.5 mm<br>2|
|Insulating Material|Polyamide 6 , 6|
|Clamping Material|CRCA|
|Flammability rating acc. to UL 94|V2|
|Area of application||
|Rated surge voltage|8 kV|
|Degree of pollution|3|
|Overvoltage category|III|
|Maximum power dissipation for<br>nominal condition|0.77 W|
|Nominal Current IN|24 A|
|Nominal Voltage UN|1000 V|
|Open side panel|Yes|
|Back of the hand protection|Guaranteed|
|Finger Protection|Guaranteed|
|Result Of Surge Voltage Test|Test passed|
|Surge Voltage Test Setpoint|9.8 kV|
|Result of power-frequency withstand<br>voltage test|Test passed|
|Power frequency withstand voltage<br>setpoint|2.2 kV|
|Result of the test for mechanical<br>stability of terminal points|Test passed|
|Result of bending test|Test passed|
|Bending test rotation speed|9|
|Bending test turns|135|
|Bending test conductor cross<br>section/weight|0.5 mm² / 0.3 kg , 2.5 mm² / 0.7 kg , 4 mm² / 0.9 kg|
|Tensile test result|Test passed|
|Conductor cross section tensile test|0.5 mm<br>2|
|Tractive force setpoint|20 N|
|Conductor cross section tensile test|2.5 mm<br>2|
|Tractive force setpoint|50 N|
|Conductor cross section tensile test|4 mm<br>2|
|Tractive force setpoint|60 N|
|Result of tight fit on support|Test passed|
|Tight fit on carrier|NS 32/NS 35|
|Setpoint|1|
|Result of voltage-drop test|Test passed|
|Requirements, voltage drop|<=3.2 mV|
|Result of temperature-rise test|Test passed|
|Result of temperature|~~**_2_**~~<br>Test passed|



~~_**2**_~~ 

|Short circuit stability result|Test passed|
|---|---|
|Conductor cross section short circuit<br>testing|2.5 mm<br>2|
|Short-time current|0.48 kA|



||**Dimensions**||
|---|---|---|
|Width|5 mm|0.2 inch|
|End cover width|1.5 mm|0.06 inch|
|Length|44.25 mm|1.74 inch|
|Height|51 mm|2.01 inch|
|Height NS 35/7,5|52 mm|2.05 inch|
|Height NS 35/15|56.4 mm|2.22 inch|
|Height NS 32/15|56.4 mm|2.22 inch|



||**Connection Data**|
|---|---|
|Screw thread|M2.6|
|Stripping length|10 mm|
|Tightening torque, min|0.4 Nm|
|Tightening torque, max|0.44 Nm|
|Connection in acc. with standard|IEC 60947-7-1|
|Conductor cross section solid min|0.5 mm<br>2|
|Conductor cross section solid max|4 mm<br>2|
|Conductor cross section AWG min,<br>Solid|20|
|Conductor cross section AWG max,<br>Solid|12|
|Conductor cross section flexible min|0.5 mm<br>2|
|Conductor cross section flexible max|2.5 mm<br>2|
|Min. AWG conductor cross section,<br>flexible|20|
|Max. AWG conductor cross section,<br>flexible|12|
|Conductor cross section flexible, with<br>ferrule without plastic sleeve min|0.5 mm<br>2|
|Conductor cross section flexible, with<br>ferrule without plastic sleeve max|2.5 mm<br>2|
|Conductor cross section flexible, with<br>ferrule with plastic sleeve min|0.5 mm<br>2|
|Conductor cross section flexible, with<br>ferrule with plastic sleeve max|2.5 mm<br>2|
|Internal cylindrical Gauge|A3|



_**3**_ 

||**Approval Details**|
|---|---|
|UL Standard|UL 1059|
|B - UL Nominal Voltage UN|600 V|
|B - UL Nominal Current IN|20 A|
|B - UL Wire Min|20 AWG|
|B - UL Wire Max|12 AWG|
|ATEX Standard|EN 60079-7|
|ATEX Nominal Voltage UN|800 V|
|ATEX Nominal Current IN|20 A|
|ATEX Cross Section Solid Min.|0.5 mm<br>2|
|ATEX Cross Section Solid Max.|4 mm<br>2|
|ATEX Cross Sec. Flexible Min.|0.5 mm<br>2|
|ATEX Cross Sec. Flexible Max.|2.5 mm<br>2|



||**Product Accessories**|**Product Accessories**|**Product Accessories**|||
|---|---|---|---|---|---|
|End Cover||||||
||Height|41.50 mm||1.63 inch||
|KPXN|Width|1.50 mm||0.06 inch||
||Length|41.50 mm||1.63 inch||
|||||||
|Partition Plate||||||
||Height|58.00 mm||2.28 inch||
|KNBF 2.5/10|Width|1.50 mm||0.06 inch||
||Length|55.50 mm||2.19 inch||
|||||||
|Cover Profile||||||
||Height||28.00 mm||1.10 inch|
|PCK3|Width||58.35 mm||2.30 inch|
||Thickness||1.00 mm||0.04 inch|
|||||||
|Cover Profile Carrier||||||
|UHDD|Height<br>Thickness<br>Length||74.50 mm<br>1.50 mm<br>55.82 mm||2.93 inch<br>0.06 inch<br>0.06 inch<br>2.20 inch|



_**4**_ 

|End Clamp|||||
|---|---|---|---|---|
|DCKN|Height<br>Width<br>Length|33.00 mm<br>6.00 mm<br>43.50 mm|1.30 inch<br>0.24 inch<br>1.71 inch|Ca<br>Tie<br>ge|
|DCKN10|Height<br>Width<br>Length|33.00 mm<br>10.00 mm<br>43.50 mm|1.30 inch<br>0.39 inch<br>1.71 inch|ak.ma|
|SCKN|Height<br>Width<br>Length|35.50 mm<br>8.00 mm<br>50.60 mm|1.40 inch<br>0.31 inch<br>1.99 inch|ole:a\-.4|
|SCUDD|Height<br>Width<br>Length|50.00 mm<br>10.00 mm<br>55.50 mm|1.97 inch<br>0.39 inch<br>2.19 inch|Wal,<br>a<br>rah ||
|SCUN|Height<br>Width<br>Length|35.50 mm<br>9.50 mm<br>50.60 mm|1.40 inch<br>0.37 inch<br>1.99 inch|kcal]<br>“{<br>oh|
|SCUSL|Height<br>Width<br>Length|41.00 mm<br>8.00 mm<br>47.50 mm|1.61 inch<br>0.31 inch<br>1.87 inch|oun q<br>Ss<br>Ls|



Fixed Bridge CCLM2.5N 

Insertion Bridge SLC2.5N Pitch 5.00 mm 0.20 inch 

Switching Jumper 

LSR2.5N RSL2.5N 

_**5**_ 

|Marker For Terminal Blocks||||
|---|---|---|---|
|LABEL KN5.5|Width|6.00 mm|0.24 inch|



|LABEL KN5.5|Width<br>6.00 mm<br>0.24 inch<br>ȴ|Width<br>6.00 mm<br>0.24 inch<br>ȴ|Width<br>6.00 mm<br>0.24 inch<br>ȴ|Width<br>6.00 mm<br>0.24 inch<br>ȴ|
|---|---|---|---|---|
|Warning Label|||||
|WL2.5N|Height<br>Thickness<br>Length|24.00 mm<br>1.10 mm<br>24.00 mm|0.94 inch<br>0.04 inch<br>0.94 inch|7“Y|



|Marker carriers||||||
|---|---|---|---|---|---|
|DCKNMLH|Height<br>Width<br>Length|45.50 mm<br>6.00 mm<br>43.50 mm||1.79 inch<br>0.24 inch<br>1.71 inch||
|SCKNMLH|Height<br>Width<br>Length<br>Height|45.50 mm<br>8.00 mm<br>48.00 mm<br>53.50 mm||1.79 inch<br>0.31 inch<br>1.89 inch<br>2.11 inch||
|SCUNMLH|Width|8.00 mm||0.31 inch||
||Length|50.60 mm||1.99 inch||
|||||||
|DIN Rail Perforated||||||
||Height||15.00 mm||0.59 inch|
|CHKDS|Width||35.00 mm||1.38 inch|
||Thickness||1.50 mm||0.06 inch|
||Height||7.50 mm||0.30 inch|
|CHKS|Width||35.00 mm||1.38 inch|
||Thickness||1.00 mm||0.04 inch|
||Height||15.00 mm||0.59 inch|
|CHS|Width||32.00 mm||1.26 inch|
||Thickness||1.50 mm||0.06 inch|
|||||||
|DIN Rail, Unperforated||||||
||Height||7.50 mm||0.30 inch|
|CHK|Width||35.00 mm||1.38 inch|
||Thickness||1.00 mm||0.04 inch|



_**6**_ 

|DIN Rail, Unperforated||||||
|---|---|---|---|---|---|
|CHKD|Height<br>Width<br>Thickness||15.00 mm<br>35.00 mm<br>1.00 mm||0.59 inch<br>1.38 inch<br>0.04 inch|
|||||||
|End Cap||||||
|CHKENDCAP|Height<br>Width<br>Length|14.00 mm<br>9.00 mm<br>41.50 mm||0.55 inch<br>0.35 inch<br>1.63 inch||
|||||||
|Spacer Plate||||||
|SBN1|Height<br>Width<br>Length|12.10 mm<br>1.37 mm<br>13.20 mm||0.48 inch<br>0.05 inch<br>0.52 inch||



_**7**_