SLC10N-10W

## KUT10N - Product Details 

## **General Information** 

|Company|Elmex Group|
|---|---|
|Product Category|Terminal Blocks|
|Product Group|Feed Through Terminal Blocks|
|Connection Method|Screw Connection|



## **Product Data** 

||**Product Data**|
|---|---|
|Product Name|KUT10N|
|Product Image|BA1k<br>‘~0|
|Line Diagram|oa|
|Short Description|Feed Through Terminal Block - Screw Connection|
|Full Description|Terminal Type - KUT10N , Feed-through terminal block for photo voltaic<br>applications , nominal voltage: 1000 V, nominal current: 63 A,<br>connection method: Screw connection, number of connections: 2, cross<br>section: 1.5 mm² - 16 mm², AWG: 16 - 6, width: 10 mm , length: 44.25<br>mm , height : 51 mm , mounting type: NS 35/7.5,  NS 35/15 , NS 32/15|
|Approvals|&)C€AYA|
|Standard Colour|Gray|
|Colour Variants|Black , Blue , Green , Khakhi , Red , Yellow ,|



## **Key Commercial Data** 

|Standard Weight|2.2 Kg|
|---|---|
|Weight per Piece (excluding packing)|20 g|
|Packing Unit|100 pc|
|Minimum Order Quantity|100 pc|
|GTIN Number|85389000|
|Country Of Origin|INDIA|



## **Technical Data - General** 

Number of levels 

1 

_**1**_ 

|Number of connections|2|
|---|---|
|Potentials|1|
|Nominal cross section|10 mm<br>2|
|Insulating Material|Polyamide 6 , 6|
|Clamping Material|CRCA|
|Flammability rating acc. to UL 94|V2|
|Area of application||
|Rated surge voltage|8 kV|
|Degree of pollution|3|
|Overvoltage category|III|
|Maximum power dissipation for<br>nominal condition|2.01 W|
|Nominal Current IN|63 A|
|Nominal Voltage UN|1000 V|
|Open side panel|Yes|
|Back of the hand protection|Guaranteed|
|Finger Protection|Guaranteed|
|Result Of Surge Voltage Test|Test passed|
|Surge Voltage Test Setpoint|9.8 kV|
|Result of power-frequency withstand<br>voltage test|Test passed|
|Power frequency withstand voltage<br>setpoint|2.2 kV|
|Result of the test for mechanical<br>stability of terminal points|Test passed|
|Result of bending test|Test passed|
|Bending test rotation speed|9|
|Bending test turns|135|
|Bending test conductor cross<br>section/weight|1.5 mm² / 0.4 kg ,10 mm² / 2 kg ,16 mm² / 2.9 kg|
|Tensile test result|Test passed|
|Conductor cross section tensile test|1.5 mm<br>2|
|Tractive force setpoint|40 N|
|Conductor cross section tensile test|10 mm<br>2|
|Tractive force setpoint|90 N|
|Conductor cross section tensile test|16 mm<br>2|
|Tractive force setpoint|100 N|
|Result of tight fit on support|Test passed|
|Tight fit on carrier|NS 32/NS 35|
|Setpoint|5|
|Result of voltage-drop test|Test passed|
|Requirements, voltage drop|<=3.2 mV|
|Result of temperature-rise test|Test passed|
|Result of temperature|~~**_2_**~~<br>Test passed|



~~_**2**_~~ 

|Short circuit stability result|Test passed|
|---|---|
|Conductor cross section short circuit<br>testing|10 mm<br>2|
|Short-time current|1.2 kA|



||**Dimensions**||
|---|---|---|
|Width|10 mm|0.39 inch|
|End cover width|1.5 mm|0.06 inch|
|Length|44.25 mm|1.74 inch|
|Height|51 mm|2.01 inch|
|Height NS 35/7,5|52 mm|2.05 inch|
|Height NS 35/15|59.5 mm|2.34 inch|
|Height NS 32/15|56.4 mm|2.22 inch|



||**Connection Data**|
|---|---|
|Screw thread|M4|
|Stripping length|12 mm|
|Tightening torque, min|1.2 Nm|
|Tightening torque, max|1.32 Nm|
|Connection in acc. with standard|IEC 60947-7-1|
|Conductor cross section solid min|1.5 mm<br>2|
|Conductor cross section solid max|16 mm<br>2|
|Conductor cross section AWG min,<br>Solid|16|
|Conductor cross section AWG max,<br>Solid|6|
|Conductor cross section flexible min|1.5 mm<br>2|
|Conductor cross section flexible max|10 mm<br>2|
|Min. AWG conductor cross section,<br>flexible|16|
|Max. AWG conductor cross section,<br>flexible|6|
|Conductor cross section flexible, with<br>ferrule without plastic sleeve min|1.5 mm<br>2|
|Conductor cross section flexible, with<br>ferrule without plastic sleeve max|10 mm<br>2|
|Conductor cross section flexible, with<br>ferrule with plastic sleeve min|1.5 mm<br>2|
|Conductor cross section flexible, with<br>ferrule with plastic sleeve max|10 mm<br>2|
|Internal cylindrical Gauge|A6|



_**3**_ 

||**Approval Details**|
|---|---|
|UL Standard|UL 1059|
|B - UL Nominal Voltage UN|600 V|
|B - UL Nominal Current IN|65 A|
|B - UL Wire Min|16 AWG|
|B - UL Wire Max|6 AWG|
|ATEX Standard|EN 60079-7|
|ATEX Nominal Voltage UN|630 V|
|ATEX Nominal Current IN|57 A|
|ATEX Cross Section Solid Min.|1.5 mm<br>2|
|ATEX Cross Section Solid Max.|16 mm<br>2|
|ATEX Cross Sec. Flexible Min.|1.5 mm<br>2|
|ATEX Cross Sec. Flexible Max.|10 mm<br>2|



||**Product Accessories**|**Product Accessories**|**Product Accessories**|||
|---|---|---|---|---|---|
|End Cover||||||
||Height|41.50 mm||1.63 inch||
|KPXN|Width|1.50 mm||0.06 inch||
||Length|41.50 mm||1.63 inch||
|||||||
|Partition Plate||||||
||Height|58.00 mm||2.28 inch||
|KNBF 2.5/10|Width|1.50 mm||0.06 inch||
||Length|55.50 mm||2.19 inch||
|||||||
|Cover Profile||||||
||Height||28.00 mm||1.10 inch|
|PCK3|Width||58.35 mm||2.30 inch|
||Thickness||1.00 mm||0.04 inch|
|||||||
|Cover Profile Carrier||||||
|UHDD|Height<br>Thickness<br>Length||74.50 mm<br>1.50 mm<br>55.82 mm||2.93 inch<br>0.06 inch<br>0.06 inch<br>2.20 inch|



_**4**_ 

|End Clamp|||||||
|---|---|---|---|---|---|---|
|DCKN10|Height<br>Width<br>Length||33.00 mm<br>10.00 mm<br>43.50 mm|||1.30 inch<br>0.39 inch<br>1.71 inch|
||Height||35.50 mm|||1.40 inch|
|SCKN|Width<br>Length||8.00 mm<br>50.60 mm|||0.31 inch<br>1.99 inch|
|SCNL|Height<br>Width||44.10 mm<br>9.50 mm|||1.74 inch<br>0.37 inch|
||Length||50.00 mm|||1.97 inch|
|SCUDD|Height<br>Width<br>Length||50.00 mm<br>10.00 mm<br>55.50 mm|||1.97 inch<br>0.39 inch<br>2.19 inch|
|SCUN|Height<br>Width<br>Length||35.50 mm<br>9.50 mm<br>50.60 mm|||1.40 inch<br>0.37 inch<br>1.99 inch|
|SCUSL|Height<br>Width<br>Length||41.00 mm<br>8.00 mm<br>47.50 mm|||1.61 inch<br>0.31 inch<br>1.87 inch|
||||||||
|Fixed Bridge|||||||
|CCLA10N|||||||
||||||||
|Insertion Bridge|||||||
|SLC10N|||||||
||||||||
|Marker For Terminal Blocks|||||||
|LABEL KN10|Width||10.00 mm|||0.39 inch|



_**5**_ 

|Marker carriers|||||
|---|---|---|---|---|
|DCKNMLH|Height<br>Width<br>Length|45.50 mm<br>6.00 mm<br>43.50 mm|1.79 inch<br>0.24 inch<br>1.71 inch|at|
|SCKNMLH|Height<br>Width<br>Length|45.50 mm<br>8.00 mm<br>48.00 mm|1.79 inch<br>0.31 inch<br>1.89 inch|x|
|SCUNMLH|Height<br>Width<br>Length|53.50 mm<br>8.00 mm<br>50.60 mm|2.11 inch<br>0.31 inch<br>1.99 inch|eltgg|



## DIN Rail Perforated 

|CHKDS|Height<br>Width<br>Thickness||15.00 mm<br>35.00 mm<br>1.50 mm||0.59 inch<br>1.38 inch<br>0.06 inch|
|---|---|---|---|---|---|
||Height||7.50 mm||0.30 inch|
|CHKS|Width||35.00 mm||1.38 inch|
||Thickness||1.00 mm||0.04 inch|
|CHS|Height<br>Width<br>Thickness||15.00 mm<br>32.00 mm<br>1.50 mm||0.59 inch<br>1.26 inch<br>0.06 inch|
|||||||
|DIN Rail, Unperforated||||||
|CHK|Height<br>Width<br>Thickness||7.50 mm<br>35.00 mm<br>1.00 mm||0.30 inch<br>1.38 inch<br>0.04 inch|
|CHKD|Height<br>Width<br>Thickness||15.00 mm<br>35.00 mm<br>1.00 mm||0.59 inch<br>1.38 inch<br>0.04 inch|
|||||||
|End Cap||||||
|CHKENDCAP|Height<br>Width<br>Length|14.00 mm<br>9.00 mm<br>41.50 mm||0.55 inch<br>0.35 inch<br>1.63 inch||



_**6**_