SKT 100/16 E WITH GLASS INSULATOR

**SKT 100** VRSM VRRM,  VDRM ITRMS = 175 A (maximum value for continuous operation) V V ITAV = 100 A (sin. 180; Tc = 85 °C) 500 400 SKT 100/04 D 900 800 SKT 100/08 D 1300 1200 SKT 100/12 E 1500 1400 SKT 100/14 E 1700 1600 SKT 100/16 E 1900 1800 SKT 100/18 E Stud Thyristor ~~2a~~ Line Thyristor **Symbol Condition Values Units** ITAV sin. 180 ; TC = 100 (85) °C 74 (100) A ID 2 x P1/120; Ta = 50 °C; B2/B6 125 / 176 A **SKT 100** 2 x P1/120F; Ta = 40 °C; B2/B6 182 / 250 A IRMS 2 x P1/120; Ta = 45 °C; W1C 146 A ITSM Tvj = 25 °C ; 10 ms 2000 A Tvj = 130 °C ; 10 ms 1750 A **Features** i[2] t Tvj = 25 °C ; 8,3...10 ms 20000 A[2] s  Hermetic metal case with glass Tvj = 130 °C ; 8,3...10 ms 15300 A[2] s insulator  Threaded stud ISO M12 x 1,75 VT Tvj = 25 °C, IT = 300 A max. 1,75 V or ½” - 20 UNF 2A VT(TO) Tvj = 130 °C max. 1 V  Interchangeable with rT Tvj = 130 °C max. 2,4 m international standard case IDD; IRD Tvj = 130 °C; VRD = VRRM;  VDD = VDRM max. 30 mA tgd Tvj = 25 °C; IG = 1A; diG/dt = 1 A/µs 1 µs **Typical Applications *** tgr VD = 0,67 * VDRM 2 µs  DC motor control (di/dt)cr Tvj = 130 °C max. 50 A/µs (e.g. for machine tools) (dV/dt)cr Tvj = 130 °C; D (E) 500 (1000) V/µs  Controlled rectifiers tq Tvj = 130 °C 100 µs (e.g. for battery charging) IH Tvj = 25 °C; typ. / max 150 / 250 mA  AC controllers IL Tvj = 25 °C; typ. / max 300 / 600 mA (e.g. for temperature control) VGT Tvj = 25 °C; d.c. min. 3 V  Recommended snubber IGT Tvj = 25 °C; d.c. min. 150 mA network e.g. for VRMS ≤ 400 V: VGD Tvj = 130 °C; d.c. max. 0,25 V R= 47 Ω/10 W, C = 0,22 µF IGD Tvj = 130 °C; d.c. max. 10 mA Rth(j-c) cont. 0,25 K/W Rth(j-c) sin. 180 0,28 K/W Rth(j-c) rec. 120 0,31 K/W 1) Mounting with grease-like thermal compound or joint contact compound Rth(c-s) 0,08 K/W 2) M12 x 1,75 is standard, “UNF” should be Tvj -40...+130 °C added in description for ½” - 20 2A thread. Tstg -55...+150 °C e.g.: SKT 100/08 D UNF Visol - V~ MS M12 or ½” - 20 UNF 10 Nm M12 or ½” - 20 UNF (lubricated)[1)] 7,5 Nm a 5 * 9,81 m/s[2] m approx. 100 g Case B5 SKT ~~=~~ 1 2020-03-25     RP © by SEMIKRON 

## **SKT 100** 

Fig. 1L Power dissipation vs. on-state current 

Fig. 2 Rated on-state current vs. case temperature 

**==> picture [178 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 4 Transient thermal impedance vs. time<br>**----- End of picture text -----**<br>


Fig. 1R Power dissipation vs. ambient temperature 

Fig. 3 Recovered charge vs. current decrease 

**==> picture [190 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 5 Thermal resistance vs. conduction angle<br>**----- End of picture text -----**<br>


© by SEMIKRON 

2020-03-25     RP 

2 

## **SKT 100** 

Fig. 6 On-state characteristics 

Fig. 7 Power dissipation vs. on-state current 

Fig. 8 Surge overload current vs. time 

© by SEMIKRON 

2020-03-25     RP 

3 

## **SKT 100** 

Fig. 9 Gate trigger characteristics 

© by SEMIKRON 

2020-03-25     RP 

4 

## **SKT 100** 

**==> picture [86 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions in mm<br>**----- End of picture text -----**<br>


## Case  B5 (IEC 60191-2: A12MA, A12U; JEDEC: TO-209 (TO94)) 

## *IMPORTANT INFORMATION AND WARNINGS 

The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged noninfringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes. 

© by SEMIKRON 

2020-03-25     RP 

5