SKM75GB12T4

**SKM75GB12T4** ~~ST~~ 

||**Absolute Maximum Ratings**|
|---|---|
||**Symbol**<br>**Conditions**<br>**Values**<br>**Unit**|
||**IGBT**|
||VCES<br>Tj= 25 °C<br>1200<br>V<br>IC<br>Tj= 175 °C<br>Tc= 25 °C<br>115<br>A<br>Tc= 80 °C<br>88<br>A<br>ICnom<br>75<br>A<br>ICRM<br>ICRM= 3xICnom<br>225<br>A<br>~~a==~~|
|**SEMITRANS® 2**<br>Fast IGBT4 Modules<br>**SKM75GB12T4**<br>**Features**<br>• IGBT4 = 4. generation fast trench IGBT<br>(Infineon)<br>• CAL4 = Soft switching 4. generation<br>CAL-diode<br>• Insulated copper baseplate using DBC<br>technology (Direct Bonded Copper)<br>• Increased power cycling capability|VGES<br>-20 ... 20<br>V<br>tpsc<br>VCC= 800 V<br>VGE≤ 15 V<br>VCES≤ 1200 V<br>Tj= 150 °C<br>10<br>µs<br>Tj<br>-40 ... 175<br>°C<br>**Inverse diode**<br>IF<br>Tj= 175 °C<br>Tc= 25 °C<br>97<br>A<br>Tc= 80 °C<br>73<br>A<br>IFnom<br>75<br>A<br>IFRM<br>IFRM= 2xIFnom<br>150<br>A<br>IFSM<br>tp= 10 ms, sin 180°, Tj= 25 °C<br>430<br>A<br>Tj<br>-40 ... 175<br>°C<br>**Module**<br>It(RMS)<br>200<br>A<br>Tstg<br>-40 ... 125<br>°C<br>Visol<br>AC sinus 50 Hz, t = 1 min<br>4000<br>V<br>~~a~~<br>~~ee ee~~<br>~~ee~~<br>~~ee~~<br>~~aSe~~<br>~~aee~~<br>~~a~~|
|• With integrated gate resistor||
|• For higher switching frequencies up to|**Characteristics**|
|20kHz<br>• UL recognized, file no. E63532|**Symbol**<br>**Conditions**<br>**min.**<br>**typ.**<br>**max.**<br>**Unit**|
||**IGBT**|
|**Typical Applications***<br>• AC inverter drives<br>• UPS<br>• Electronic welders at fsw up to 20 kHz<br>**Remarks**<br>• Case temperature limited<br>to Tc= 125°C max.<br>• Recommended Top= -40 ... +150°C<br>• Product reliability results valid<br>for Tj= 150°C|VCE(sat)<br>IC= 75 A<br>VGE= 15 V<br>chiplevel<br>Tj= 25 °C<br>1.85<br>2.10<br>V<br>Tj= 150 °C<br>2.28<br>2.45<br>V<br>VCE0<br>chiplevel<br>Tj= 25 °C<br>0.80<br>0.90<br>V<br>Tj= 150 °C<br>0.70<br>0.80<br>V<br>rCE<br>VGE= 15 V<br>chiplevel<br>Tj= 25 °C<br>14<br>16<br>mΩ<br>Tj= 150 °C<br>21<br>22<br>mΩ<br>VGE(th)<br>VGE=VCE, IC= 3 mA<br>5<br>5.8<br>6.5<br>V<br>ICES<br>VGE= 0 V<br>VCE= 1200 V<br>Tj= 25 °C<br>1<br>mA<br>Tj= 150 °C<br>-<br>mA<br>Cies<br>VCE= 25 V<br>VGE= 0 V<br>f = 1 MHz<br>4.4<br>nF<br>Coes<br>f = 1 MHz<br>0.29<br>nF<br>Cres<br>f = 1 MHz<br>0.24<br>nF<br>QG<br>VGE= - 8 V...+ 15 V<br>425<br>nC<br>~~eeee~~<br>~~fs ee ee~~<br>~~ee~~<br>~~ppfp~~<br>~~aSe~~<br>~~Po~~<br>~~ee~~<br>~~ee~~<br>~~a~~|
||RGint<br>Tj= 25 °C<br>10<br>Ω<br>~~a~~|
|**GB**<br>td(on)<br>VCC= 600 V<br>IC= 75 A<br>VGE= +15/-15 V<br>RG on= 1Ω<br>RG off= 1Ω<br>di/dton= 1600 A/µs<br>di/dtoff= 950 A/µs<br>Tj= 150 °C<br>150<br>ns<br>tr<br>Tj= 150 °C<br>39<br>ns<br>Eon<br>Tj= 150 °C<br>11<br>mJ<br>td(off)<br>Tj= 150 °C<br>370<br>ns<br>tf<br>Tj= 150 °C<br>66<br>ns<br>Eoff<br>Tj= 150 °C<br>6.9<br>mJ<br>Rth(j-c)<br>per IGBT<br>0.38<br>K/W<br>~~a ee~~<br>~~oo~~<br>~~es ee~~<br>~~Po~~<br>~~**ee** e~~~~**e**~~<br>~~“ele. a~~<br>~~e~~<br>iS. a<br>~~ah~~||



~~Ps~~ **© by SEMIKRON Rev. 4.0 – 16.05.2017 1** 

**SKM75GB12T4** ~~ee~~ 

**SEMITRANS[®] 2** 

Fast IGBT4 Modules 

## **SKM75GB12T4** 

## **Features** 

- IGBT4 = 4. generation fast trench IGBT (Infineon) 

- CAL4 = Soft switching 4. generation CAL-diode 

- Insulated copper baseplate using DBC technology (Direct Bonded Copper) 

- Increased power cycling capability 

- With integrated gate resistor 

|**Characteristics**<br>**Symbol**<br>**Conditions**<br>**min.**<br>**typ.**<br>**max.**<br>**Unit**<br>**Inverse diode**|**Characteristics**<br>**Symbol**<br>**Conditions**<br>**min.**<br>**typ.**<br>**max.**<br>**Unit**<br>**Inverse diode**|**Characteristics**<br>**Symbol**<br>**Conditions**<br>**min.**<br>**typ.**<br>**max.**<br>**Unit**<br>**Inverse diode**|**Characteristics**<br>**Symbol**<br>**Conditions**<br>**min.**<br>**typ.**<br>**max.**<br>**Unit**<br>**Inverse diode**|**Characteristics**<br>**Symbol**<br>**Conditions**<br>**min.**<br>**typ.**<br>**max.**<br>**Unit**<br>**Inverse diode**|
|---|---|---|---|---|
|VF= VEC|IF= 75 A<br>VGE= 0 V<br>chiplevel|Tj= 25 °C|2.17<br>2.49|V|
|||Tj= 150 °C|2.11<br>2.42|V|
|VF0|chiplevel|Tj= 25 °C|1.30<br>1.50|V|
|||Tj= 150 °C|0.90<br>1.10|V|
|rF<br>~~Po~~|chiplevel<br>~~ee~~|Tj= 25 °C<br>~~ee~~|12<br>13<br>~~ee~~|mΩ<br>~~ee~~|
|~~Po~~<br>~~Po~~<br>~~fe~~||Tj= 150 °C<br>~~ee~~<br>~~ee~~<br>~~ee~~|16<br>18<br>~~ee~~<br>~~ee~~|mΩ<br>~~ee~~<br>~~ee~~|
|IRRM<br>~~Po~~<br>~~Po~~<br>~~fe~~|IF= 75 A<br>di/dtoff= 990 A/µs<br>VGE= ±15 V<br>VCC= 600 V<br>~~ee~~|Tj= 150 °C<br>~~ee ~~<br>~~ee~~<br>~~ee~~|37<br> ~~ee ~~<br>~~ee~~|A<br> ~~ee~~<br>~~ee~~|
|Qrr<br>~~Po~~<br>~~fe~~||Tj= 150 °C<br>~~ee~~<br>~~ee~~|12.6<br>~~ee ~~|µC<br> ~~ee~~|
|Err<br>~~fe~~<br>~~a~~||Tj= 150 °C<br>~~ee~~<br>~~Pf~~|4.7<br>~~Pf~~|mJ<br>~~Pf~~|
|Rth(j-c)<br>~~fe~~<br>~~a~~<br>~~a~~|per diode<br>~~ee ee~~<br>~~Pf~~<br>||0.58<br>~~Pf~~<br>|K/W<br>~~Pf~~<br>|
|**Module**<br>~~Re~~|||||
|LCE<br>~~Re~~<br>~~oe~~|~~Re~~<br>~~oe~~||30<br>~~Re~~<br>~~oe~~|nH<br>~~Re~~<br>~~oe~~|
|RCC'+EE'<br>~~oe~~<br>~~Po~~|measured per<br>switch<br>~~oe~~<br>~~ee~~|TC= 25 °C<br>~~oe~~<br>~~ee ee~~|0.65<br>~~oe~~<br>~~ee~~|mΩ<br>~~oe~~<br>~~ee~~|
|~~oe~~<br>~~Po~~<br>~~ee~~||TC= 125 °C<br>~~oe~~<br>~~ee ee~~<br>~~ee ee~~|1.09<br>~~oe~~<br>~~ee~~<br>~~ee~~|mΩ<br>~~oe~~<br>~~ee~~<br>~~ee~~|
|Rth(c-s)<br>~~oe~~<br>~~Po~~<br>~~ee~~|calculated without thermal coupling<br>(λgrease=0.81 W/(m*K))<br>~~oe~~<br>~~ee ee~~<br>~~ee ee~~||0.04<br>0.05<br>~~oe~~<br>~~ee ~~<br>~~ee~~|K/W<br>~~oe~~<br> ~~ee~~<br>~~ee~~|
|Ms<br>~~ee ~~<br>~~a~~|to heat sink M6<br> ~~ee ee~~<br>~~a~~||3<br>5<br>~~ee ~~<br>~~a~~|Nm<br> ~~ee~~<br>~~a~~|
|Mt<br>~~a~~<br>~~Po~~|~~a~~|to terminals M5<br>~~a~~<br>~~ee ee~~|2.5<br>5<br>~~a~~<br>~~ee~~|Nm<br>~~a~~<br>~~ee~~|
|~~a~~<br>~~Po~~<br>~~ee~~||~~a~~<br>~~ee ee~~|~~a~~<br>~~ee~~|Nm<br>~~a~~<br>~~ee~~|
|w<br>~~a~~<br>~~Po~~<br>~~ee~~|~~a~~<br>~~ee ee~~||160<br>~~a~~<br>~~ee ~~|g<br>~~a~~<br> ~~ee~~|



- For higher switching frequencies up to 20kHz 

- UL recognized, file no. E63532 

## **Typical Applications*** 

- AC inverter drives 

- UPS 

- Electronic welders at fsw up to 20 kHz 

## **Remarks** 

- Case temperature limited to Tc = 125°C max. 

- Recommended Top = -40 ... +150°C 

- Product reliability results valid for Tj = 150°C 

**==> picture [54 x 66] intentionally omitted <==**

**----- Start of picture text -----**<br>
Ms r GB<br>**----- End of picture text -----**<br>


~~eee~~ **2 Rev. 4.0 – 16.05.2017 © by SEMIKRON** 

**SKM75GB12T4** 

Fig. 1: Typ. output characteristic, inclusive RCC'+ EE' 

Fig. 3: Typ. turn-on /-off energy = f (IC) 

Fig. 5: Typ. transfer characteristic 

Fig. 2: Rated current vs. temperature IC = f (TC) 

Fig. 4: Typ. turn-on /-off energy = f (RG) 

**==> picture [166 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 6: Typ. gate charge characteristic<br>**----- End of picture text -----**<br>


**© by SEMIKRON** 

**Rev. 4.0 – 16.05.2017** 

**3** 

**SKM75GB12T4** 

Fig. 7: Typ. switching times vs. IC 

Fig. 9: Transient thermal impedance 

Fig. 11: CAL diode peak reverse recovery current 

Fig. 8: Typ. switching times vs. gate resistor RG 

Fig. 10: Typ. CAL diode forward charact., incl. RCC'+ EE' 

Fig. 12: Typ. CAL diode peak reverse recovery charge 

**© by SEMIKRON** 

**Rev. 4.0 – 16.05.2017** 

**4** 

**SKM75GB12T4** 

## **SEMITRANS 2** 

**==> picture [15 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
GB<br>**----- End of picture text -----**<br>


~~a~~ **© by SEMIKRON Rev. 4.0 – 16.05.2017 5** 

**SKM75GB12T4** 

This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, chapter IX. 

## ***IMPORTANT INFORMATION AND WARNINGS** 

The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes. 

**© by SEMIKRON** 

**Rev. 4.0 – 16.05.2017** 

**6**