SKKT 132/12 E

## **SKKT 132, SKKH 132** THYRISTOR BRIDGE,SCR,BRIDGE 

**Symbol Conditions Values Units** 

## **SEMIPACK[®] 2** 

## Thyristor / Diode Modules 

**SKKT 132 SKKH 132** 

**Features** Oo “rep een h fee Wels rel unetfe}n ele oxide ceramic isolated baseplate e Hard soldered joints for reliability e UL recognized, file no. E **Typical Applications*** P Dc ' trol 

**==> picture [7 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
1)<br>**----- End of picture text -----**<br>


**SKKT SKKH** 

© by SEMIKRON 

1 

- 19 07 -20 21 MS 

## RECTIFIER,DIODE,THYRISTOR,MODULE 

**==> picture [205 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 1L Power dissipation per thyristor vs. on-state current<br>**----- End of picture text -----**<br>


**==> picture [202 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 1R Power dissipation per thyristor vs. ambient temp.<br>**----- End of picture text -----**<br>


**==> picture [188 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 2L Power dissipation per module vs. rms current<br>**----- End of picture text -----**<br>


**==> picture [188 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 2R Power dissipation per module vs. case temp.<br>**----- End of picture text -----**<br>


**==> picture [208 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 3L Power dissipation of two modules vs. direct current<br>**----- End of picture text -----**<br>


**==> picture [202 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 3R Power dissipation of two modules vs. case temp.<br>**----- End of picture text -----**<br>


© by SEMIKRON 

2 

19-07-2021 MS 

## **SKKT 132, SKKH 132** THYRISTOR BRIDGE,SCR,BRIDGE 

Fig. 4L Power dissipation of three modules vs. direct and rms current 

Fig. 4R Power dissipation of three modules vs. case temp. 

Fig. 5 Recovered charge vs. current decrease 

Fig. 6 Transient thermal impedance vs. time 

**==> picture [107 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 7 On-state characteristics<br>**----- End of picture text -----**<br>


Fig. 8 Surge overload current vs. time 

© by SEMIKRON 

3 

19-07-2021 MS 

## RECTIFIER,DIODE,THYRISTOR,MODULE 

Fig. 9 Gate trigger characteristics 

**==> picture [67 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions in mm<br>**----- End of picture text -----**<br>


© by SEMIKRON 

4 

19-07-2021 MS 

**SKKT 132, SKKH 132** THYRISTOR BRIDGE,SCR,BRIDGE 

This is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340. 

## ***IMPORTANT INFORMATION AND WARNINGS** 

The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes. 

© by SEMIKRON 

5 

19-07-2021 MS