SKH-M1T-G

|Drawing No.|Rev.|Page|
|---|---|---|
|SKH-M1J-W18|A|1 / 4|



## SPECIFICATIONS 

[1.General Specifications] Product Name Rotating Beacons Model SKH-M1□□-□ SKH-M2□□-□ Rated Voltage 12-24V DC 100-240V AC (50/60Hz) Operating Voltage Range 10-30V DC 90-250V AC 12V DC 24V DC 100V AC 240V AC Rated Current No Buzzer 0.21A 0.12A 0.07A 0.04A Consumption Max. ~~————————~~ With Buzzer 0.23A 0.15A 0.08A 0.05A Rated Power No Buzzer 2.5W 2.9W 3.0W Max. ~~—————~~ Consumption With Buzzer 2.8W 3.6W 3.3W Operating Ambient Temperature -10℃ to +50℃ Operating Ambient Humidity Less than  90 % (No condensation) Storage Ambient Temperature -20℃ to +60℃ Storage Ambient Humidity Less than  90 % (No condensation) Mounting Location Indoor/Outdoor Indoor : Upright, Inverted & Sideways Mounting Direction ~~a~~ Outdoor : Upright IP23(Excluding Terminal Block Aperture ※1) Protection Rating IP65(SZW-103 [Rubber Gasket] Attachment) ~~——E————————~~ Environmental Condition Upright More than 1MΩ at  500V DC between live part More than 3MΩ at  500V DC between live part Insulation Resistance and non-current carrying metallic part and non-current carrying metallic part ~~a~~ 500V AC applied for 1min between live part ~~ee~~ 4,000V AC applied for 1min between live part Withstand Voltage and non-current carrying metallic part and non-current carrying metallic part without breaking insulation without breaking insulation SKH-M1J 0.33kg SKH-M2J 0.36kg SKH-M1JB 0.34kg SKH-M2JB 0.37kg Mass (Typ.) SKH-M1T 0.30kg SKH-M2T 0.33kg ~~aa~~ SKH-M1TB 0.31kg SKH-M2TB 0.34kg Sound Pressure Level (Typ.) 88dB Environmental Condition Front direction from the Buzzer Aperture/at 1m Rotation Flashing Rate (Typ.) 120 R.P.M. UL UL508, CSA-C22.2 No.14 (UL File No.E215660) EN61000-6-4 EN61000-6-4, EN61000-6-2 EMC Directive EN61000-6-2 EN61000-3-2, EN61000-3-3 ~~ee~~ KC KN61000-6-4, KN61000-6-2 FCC FCC Part15 SubpartB ClassA, ICES-003 ClassA Conformity RoHS Directive EN50581 Standards Low Voltage IEC/EN60947-5-1,EN62471 Directive ~~————~~ EAC TPTC020/2011 TPTC020/2011, TPTC004/2011 UL, Low Voltage Directive, and EAC have been evaluated for use ~~OO~~ in indoor industrial control equipment. Due to the characteristics of the LED elements, a variation in difference of the color tone and brightness of every product may occur. Remarks ※1 For models with terminal block, additional waterproofing may be required depending on operating environment. 

Drawing No. SKH-M1J-W18 

**==> picture [78 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
Rev. Page<br>A<br>2 / 4<br>**----- End of picture text -----**<br>


## [2.Model Number Configuration] 

**S K H M 1 J B R ■ Rated Voltage• Wiring ■ Buzzer ■ LED Unit Color** M1J ： 12-24V DC・Cabtyre Cord (None) ： No Buzzer R ： Red M1T ： 12-24V DC・Terminal block B ： With Buzzer Y ： Amber M2J ： 100-240V AC・Cabtyre Cord G ： Green M2T ： 100-240V AC・Terminal block B ： Blue 

## [3.Outer Dimensions] 

**==> picture [439 x 433] intentionally omitted <==**

**----- Start of picture text -----**<br>
100 [mm] [mm]<br>| a)<br>‘ini @ a27 TO SRWes<br>ml<br>p CT CC «“Nameplate<br>■SKH-M□T ■SKH-M□TB<br>PtLdta<br>L____J | G)<br>Le lle Lo<br>l 3 I Aperture Section<br>nm ; (Model with Buzzer Only)<br>~— 07.7 G)<br>■SKH-M1J□ From the cord outlet 500+30<br>07.7 Plain Wassher(M5) — |Nut(M5)<br>SUS SUS<br>■SKH-M2J□ From the cord outlet 500+30 ©)<br>・ «Maximum Maximum Board Thickness Board Thickness ： : 8 8 SF3 pcs. Nw 3 pcs.<br>・<br>Number Name Material   Specification<br>1 Globe PC<br>2 Case PC<br>3 Cabtyre Cord PVC, M1J□ : AWG22×3, M2J□ : AWG18×2+AWG24×2<br>LCP GF,<br>4 Terminal block Applicable wire size Solid Wire : 0.13-1.5mm [2] ,<br>Stranded Wire : AWG28-14<br>**----- End of picture text -----**<br>


Drawing No. SKH-M1J-W18 

|Rev.|Page|
|---|---|
|A|3 / 4|



## [4.Mounting Dimensal Drawing] 

**==> picture [473 x 67] intentionally omitted <==**

**----- Start of picture text -----**<br>
[mm]<br>■SKH-M1J□/SKH-M2J□<br>Recommended Tightening Torque<br>1.4N・m<br>%100(Outer Dimensions) {+<br>**----- End of picture text -----**<br>


**==> picture [116 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
■SKH-M1T□/SKH-M2T□<br>**----- End of picture text -----**<br>


**==> picture [116 x 22] intentionally omitted <==**

**----- Start of picture text -----**<br>
Recommended Tightening Torque<br>1.4N・m<br>**----- End of picture text -----**<br>


Drawing No. Rev. Page SKH-M1J-W18 A 4 / 4 

## [5.Wiring Diagram] 

**==> picture [62 x 18] intentionally omitted <==**

**----- Start of picture text -----**<br>
■ MSKH-M1JO SKH-M1J□<br>**----- End of picture text -----**<br>


■ MESKH-M2J SKH-M2J O □ 

## ■ MSKH-M1TO SKH-M1T□ 

**==> picture [63 x 12] intentionally omitted <==**

**----- Start of picture text -----**<br>
■ MSKH-M2TO SKH-M2T□<br>**----- End of picture text -----**<br>


**==> picture [100 x 25] intentionally omitted <==**

**----- Start of picture text -----**<br>
※For No Buzzer Model,<br>do not require wiring.<br>**----- End of picture text -----**<br>