SIL10E-05W3V3-HJ

## **ARTESYN SIL10E Series** Non-Isolated DC-DC Converters 

Advanced Energy's Artesyn SIL10E series of non-isolated DC-DC converters comprises eight fixed output models covering voltages from 0.8 to 3.3 Vdc and one wide output trim model that can adjusted over the range 0.8 to 3.63 Vdc. All models can deliver up to 10 amps output current. The 3.3 V fixed output and trimmable models accept a 4.5 to 5.5 Vdc input, while all other fixed output models accept a 3 to 5.5 Vdc input. 

## **DATA SHEET** 

## **Total Power:** 

**Up to 49.9 W** 

## **Input Voltage:** 

**3.0 - 5.5 Vdc** 

**# of Outputs:** 

**Single** 

## **SPECIAL FEATURES** 

- 10 A current rating 

- Input voltage range: 3.0 - 5.5 Vdc 

- Output voltage: 0.8 - 3.63 V 

- Ultra-high efficiency: 96% @ 5 Vin and 3.3 Vout 

- Extremely low internal power dissipation 

## **SAFETY** 

   - UL, cUL CAN/CSA 22.2 No. 60950 1-03/UL 60950-1, File No. E186249 

   - TÜV Product Service (EN60950) Certificate No. B 08 05 51485 378 

   - CB report and certificate to IEC60950, Certificate No. DE3-51686M1 

- Minimal thermal design concerns 

- Designed in reliability: MTBF of >7 million hours per Telcordia SR-322 

- Ideal solution where board space is at a premium or tighter card pitch is required 

- Industry standard footprint and pin out 

- Available RoHS compliant 

- Two year warranty 

©2021 Advanced Energy Industries, Inc. 

**SIL10E** 

## **ELECTRICAL SPECIFICATIONS** 

**==> picture [479 x 275] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input<br>Input ra nge 3.3 - 5.5 Vdc<br>Input current  No load 70 mA<br>Max 8 A max. @ Io max. and Vout = 3.3 V<br>Input reflected ripple  65 mA rms..<br>Remote ON/OFF See Note 2<br>Start-up time <20 ms<br>Output<br>Voltage adjustability  Fixed output versions ±10%<br>(See Note 1) 5 V input with wide trim 0.8 - 3.63 Vdc<br>3.3 V input with wide trim 0.8 - 2.75 Vdc<br>Output setpoint accuracy ±0.4%<br>Line regulation ±0.2%<br>Load regulation ±1.0%<br>Minimum load 0 A<br>Overshoot / undershoot None<br>Ripple and noise 5 Hz to 20 MHz 50 mV pk=pk<br>25 mV rms max<br>Transient response 50 mV max. deviation<br>50 μs recovery to within ±1.0%<br>Remote sense  10% Vo compensation<br>**----- End of picture text -----**<br>


Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. 

## **GENERAL SPECIFICATIONS** 

**==> picture [479 x 154] intentionally omitted <==**

**----- Start of picture text -----**<br>
Efficiency See Table<br>Insulation voltage  Non-isolated<br>Switching frequency Fixed 300 kHz typical<br>Approvals and standards EN60950, UL/cUL60950<br>Material flammability UL94V-0<br>Dimensions L x W x H  50.8 x 7.8 x 12.7 mm<br>2.0 x 0.31 x 0.5 inches<br>Pin length  Vertical  0.135 ± 0.002 in<br>(3.43 ± 0.5 mm)<br>Weight 5 g (0.18 oz)<br>MTBF Telcordia SR-332 7,042,000 hours<br>MIL-HDBK-217F 680,000 hours<br>**----- End of picture text -----**<br>


## **ENVIRONMENTAL SPECIFICATIONS** 

**==> picture [479 x 69] intentionally omitted <==**

**----- Start of picture text -----**<br>
Thermal performance  Operating ambient temperature  -40 °C to +100 °C<br>See Note 3  Non-operating temperature  -40 °C to +125 °C<br>Protection<br>Short-circuit  Continuous<br>Thermal  Automatic recovery<br>**----- End of picture text -----**<br>


**2 advancedenergy.com** 

**SIL10E** 

## **EMC CHARACTERISTICS** 

Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 

**==> picture [479 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
ORDERING INFORMATION<br>Output  Output  Output  Regulation<br>Model         Power  Input Output  Current  Current Efficiency<br>Number(3,4) (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load<br>SIL10E-05W3V3-VJ  36.3 W 4.5 - 5.5 Vdc 0.8 - 3.63 V 0 A 10A 95% ±0.2% ±1.0%<br>**----- End of picture text -----**<br>


## **PART NUMBER SYSTEM WITH OPTIONS** 

**==> picture [478 x 77] intentionally omitted <==**

**----- Start of picture text -----**<br>
Product Family Rated Output Performance Input Voltage Type of Output Output Voltage   Mounting / Pack-<br>Current aging Options<br>SIL 10 E - 05 W - 3V3 VJ<br>SIL = Single In  10 = 10 Amps E = Enhanced   05 = 3.0 - 5.5 V W = Wide 2.5V, 3.3V, etc. V = Vertical<br>Line Performance 12 = 10 - 12 V H = Horizontal<br> J = Pb free (RoHS<br>      6/6 compliant)<br>**----- End of picture text -----**<br>


## **OUTPUT VOLTAGE ADJUSTMENT** 

The ultra-wide output voltage trim range offers major advantages to users who select the SIL10E-05W3V3J. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.8 Vdc to 3.63 Vdc. When the SIL10E-05W3V3J series converter leaves the factory the output has been adjusted to the default voltage of 3.3 V. 

- When Vin >4.5 V, then Vout can be adjusted from 0.8 - 3.63 Vdc 

- When Vin <4.5 V, then Vout can be adjusted from 0.8 - 2.75 Vdc 

## **Notes:** 

1.    When Vin > 4.5 V, then Vout can be adjusted from 0.8 V to 3.6 V. 

- When Vin < 4.5 V, then Vout can be adjusted from 0.8 V to 2.75 V. 

2.    The SIL10E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL10E: 

- **Configuration** 

Remote pin open circuit 

Remot pin pulled low 

Remote pin pulled high [Von/off > 1.2 V] 

**Converter Operation** 

Unit is ON 

- Unit is ON 

Unit is OFF 

3.    Full derating curves available in both the Longform (Technical Reference) and Application Note 136. 

4.    For certain applications that use low ESR capacitors on the output of the convertor and to insure maximum converter stability, please add the suffix ‘02’ to the model, e.g. SIL10E-05S2V5-V02J. 

5.    NOTICE: Some models do not support all options. Please contact your local Advanced Energy’s Artesyn representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative. 

6.    All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. 

**advancedenergy.com       3** 

**SIL10E** 

## **MECHANICAL DRAWINGS** 

## **Horizontal Mount** 

## **Vertical Mount** 

Dimensions in Inches (mm) Tolerances (unless other wise speci.ed) 2 Place 0.15 3 Place 0.006 

||**Output Pin Assignments (J1)**|||**Input Pin Assignments (J2)**|
|---|---|---|---|---|
|Pin|Function||Pin|Function|
|1|+Vout||1|Ground|
|2|+Vout||2|+Vin|
|3|Remote Sense (+)||3|+Vin|
|4|+Vout||4|No Pin|
|5|Ground||5|Trim|
||||6|Remote ON/OFF|



**4 advancedenergy.com** 

**==> picture [596 x 270] intentionally omitted <==**

## **ABOUT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-SIL10E-235-01 2.07