SIL05E-05W3V3-HJ

## **ARTESYN SIL05E Series** Non-Isolated DC-DC Converters 

Advanced Energy's Artesyn SIL05E series are non-isolated dc-dc converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from a 3.3 - 5 Vin source. The SIL05E has a wide input range (3.0 - 5.5 Vdc) and offers a wide 0.75 - 3.63 Vdc output voltage range with a 5 A load, which allows for maximum design flexibility and a pathway for future upgrades. The SIL05E is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art automated manufacturing techniques, the SIL05E offers compact size and efficiencies of up to 94%. 

- Industry standard footprint 

## **SPECIAL FEATURES** 

## **DATA SHEET** 

## **Total Power:** 

**Up to 18 W** 

## **Input Voltage:** 

**3.0 - 5.5 Vac** 

## **# of Outputs:** 

**Single** 

   - Available RoHS compliant 

- 5 A current rating 

   - Two year warranty 

- Input voltage range: 

- 3.0 - 5.5 Vdc 

## **SAFETY** 

- Output voltage range: 

- 0.75 - 3.63 V 

- Ultra-high efficiency: 

- 94% @ 5 Vin and 3.3 Vout 

- Extremely low internal power 

- dissipation 

- Minimal thermal design concerns 

- Designed in reliability: 

   - UL, cUL CAN/CSA 22.2 No. 

   - E174104 

   - UL60950 File No. E174104 

   - TÜV Product Service (EN60950) 

   - Certificate No. B 03 10 38572 

   - CB report and certificate to 

   - DE3-51686M1 

- MTBF of >9 million hours per Telcordia SR-322 

- Ideal solution where board space is 

- at a premium or tighter card pitch is required 

©2021 Advanced Energy Industries, Inc. 

**SIL05E Series** 

## **ELECTRICAL SPECIFICATIONS** 

**==> picture [477 x 256] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input<br>Input ra nge 3.0 - 5.5 Vdc<br>No Load Input Current 150mA<br>Input current (max.) 3.9 A max. @ Io max. and Vout = 3.3 V<br>Input reflected ripple  40 mA rms<br>Remote ON/OFF See Note 1<br>Start-up time<br>Output<br>Voltage adjustability 0.75 - 3.63 Vdc<br>Setpoint accuracy ±0.4%.<br>Line regulation ±1.0%<br>Load regulation  ±1.0%<br>Minimum load 0A<br>Overshoot/undershoot None<br>Ripple and noise 75 mV pk-pk<br>5 Hz to 20 MHz 25 mV rms<br>Temperature co-efficient ±0.01%/°C<br>Transient response 60 mV max. deviation<br>50 μs recovery within 1%<br>**----- End of picture text -----**<br>


Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. 

## **GENERAL SPECIFICATIONS** 

**==> picture [479 x 143] intentionally omitted <==**

**----- Start of picture text -----**<br>
Efficiency 94%<br>Insulation voltage Non-isolated<br>Switching frequency  Fixed  300 kHz typical<br>Approvals and standards EN60950<br>UL/cUL60950<br>Material flammability UL94V-0<br>Dimensions L x W x H  22.90 x 7.09 x 10.21 mm<br>0.902 x 0.279 x 0.402 inches<br>Weight 2.5 g (0.09 oz)<br>Coplanarity 100 μm<br>MTBF Telcordia SR-332 9,009,000 hours<br>**----- End of picture text -----**<br>


## **ENVIRONMENTAL SPECIFICATIONS** 

**==> picture [479 x 55] intentionally omitted <==**

**----- Start of picture text -----**<br>
Operating ambient temperature -40 ° to 85 °C<br>Non-operating temperature -40 ° to 125 °C<br>Short-circuit Continuous<br>Thermal Automatic recovery<br>**----- End of picture text -----**<br>


**2 advancedenergy.com** 

**SIL05E Series** 

**EMC CHARACTERISTICS** Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 ~~os~~ **ORDERING INFORMATION Output Output Output Regulation Power Input Output Current Current Efficiency Line Load Model Number(3,4) (Max.) Voltage Voltage (Min.) (Max.) (Typical)** SIL05E-05W3V3-VJ 18.15 W 3.0 - 5.5 V 0.75 - 3.63 V 0 A 5 A 94% ±1.0% ±1.0% **PART NUMBER SYSTEM WITH OPTIONS** ~~—~~ **Product Family Rated Output Performance Input Voltage Type of Output Output Voltage Mounting/PackagCurrent ing Options** SIL 05 E - 05 W 3V3 - VJ V = Vertical SIL = Single In 05 = 5 Amps E = Enhanced 05 = 3.0 - 5.5 Vdc W = Wide 0.75 - 3.63 Vdc H = Horizontal Line Performance J = Pb-free (RoHS ~~AIRE~~ 6/6 compliant) **OUTPUT VOLTAGE ADJUSTMENT** The ultra-wide output voltage trim range offers major advantages to users who select the SIL05E-05W3V3. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.75 to 3.63 Vdc. 

When the SIL05E-05W3V3 converter leaves the factory, the output has been adjusted to the default voltage of 0.75 V. 

- When Vin >4.5 V, then Vout can be adjusted from 0.75 - 3.63 Vdc 

- When Vin <4.5 V, then Vout can be adjusted from 0.75 - 2.75 Vdc 

## **Notes:** 

1. The SIL05E features a ‘Negative Logic’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SIL05E: 

**Configuration Coverter Operation** Remote pin open circuit Unit is ON Remot pin pulled low Unit is ON Remote pinpulled high [Von/off > 2.5 V] Unit is OFF 

- A ‘Positive Logic’ Remote ON/OFF version is also possible with this converter. To order please use part number SIL05E-05W3V3-VRJ. 

2.  Full derating curves available in both the Longform (Technical Reference) and Application Note. 

3.  For horizontal mounting option, please consult factory for details. 

4.  NOTICE: Some models do not support all options. Please contact your local Advanced Energy’s Artesyn representative or use the on-line model number search tool at http://www.artesyn.com to find a suitable alternative. 

**advancedenergy.com       3** 

**SIL05E Series** 

## **MECHANICAL DRAWINGS** 

**==> picture [350 x 175] intentionally omitted <==**

**----- Start of picture text -----**<br>
0.902 [22.90] 0.279<br>[7.09]<br>0.402<br>[10.21]<br>5 4 3 2 1<br>0.050 [1.27] 0.150 [3.81]<br>0.025[0.64] x 0.025[0.64]<br>0.100 [2.54] Connector 5 places<br>0.600 [15.24]<br>0.700 [17.78]<br>All dimensions in inches (mm)<br>All tolerance  ±0.010in ( ±0.25mm)<br>0.800 [20.32] unless otherwise stated<br>**----- End of picture text -----**<br>


**==> picture [142 x 92] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pin Assignments<br>Pin No. Function<br>1 Vout<br>2 Trim<br>3 Ground<br>4 Vin<br>5 Remote ON/OFF<br>**----- End of picture text -----**<br>


**4 advancedenergy.com** 

**==> picture [596 x 270] intentionally omitted <==**

## **ABOUT ADVANCED ENERGY** 

Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. 

Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. 

For international contact information, visit advancedenergy.com. 

powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 

Specifications are subject to change without notice. Not responsible for errors or omissions. ©2021 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. 

ENG-SIL05E-235-01 2.07