SHP-10K-230L

AC/DC Enclosed Power Supply (PSU), Water Cooling, ITE & Industrial, 1 Outputs, 10 kW, 230 VDC

⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
Manufacturer: MEAN WELL
Product type: AC / DC Enclosed Power Supplies
SVHC: No SVHC (25-Jun-2025)
Product Range: SHP-10K Series
No. of Outputs: 1Outputs
Output Power Max: 10kW
Input Voltage VAC: 340V AC to 530V AC
Power Supply Output Type: Programmable
Output Current - Output 1: 43.5A
Output Current - Output 2: -
Output Current - Output 3: -
Output Current - Output 4: -
Output Voltage - Output 1: 230VDC
Output Voltage - Output 2: -
Output Voltage - Output 3: -
Output Voltage - Output 4: -
Power Supply Applications: ITE & Industrial
Delivery and price
Units per pack	1
Price	2783.13 €
Current stock	10+
Lead time	30 days
Datasheet
**SHP - 10K  series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

**==> picture [43 x 5] intentionally omitted <==**

**----- Start of picture text -----**<br>
User’s Manual<br>**----- End of picture text -----**<br>


**** Front EZ” seete zee {| G2 Back (oneOF mS.                     

**==> picture [111 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
<br>**----- End of picture text -----**<br>


**==> picture [245 x 167] intentionally omitted <==**

**----- Start of picture text -----**<br>
Front<br>= - a ee bs<br>Back<br>FEM!<br><br>    <br>      <br>       <br>**----- End of picture text -----**<br>


**==> picture [204 x 32] intentionally omitted <==**

**----- Start of picture text -----**<br>
BauarSicherheitbeegelodwacmat geprufto ges g<br>[4] www.ID 2000000000tuv.com | Hl CBCE LK<br>UL62368-1 EN62368-1 TPTC004 IEC62368-1<br>**----- End of picture text -----**<br>


## ■ **** 

‧ψ 

- ‧ 

- ‧ 

- ‧ 

- ‧ 

- ‧ 

- ‧ 

## ■ **** 

   - ‧ 

   - ‧ 

   - ‧ 

   - ‧ 

   - ‧ 

   - ‧ 

   - ‧ 

- ‧  

- ‧ 

## ■ **** 

  

## ■ **** 

 ψ     ℃    

## ■ **** 

**   ** ~~[~~ **** ~~JL~~[JL]]      f ~~c~~  

||||
|---|---|---|
||||
||||
||||



_File Name:SHP-10K-SPEC   2022-07-27_ 

**SHP - 10K series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

## **SPECIFICATION** 

|**MODEL**<br>**DC VOLTAGE (factory default)**<br>**CURRENT (factory default)**<br>**CURRENT RANGE**<br>**RATED POWER (max.)**<br>**FULL POWER VOLTAGE RANGE**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**Note.6**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER LOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>3000ms, 100ms at full load<br>25ms / 400VAC at 75% load          20ms / 400VAC at full load<br>3<br>3-wire / 340 ~ 530VAC<br>ψ<br>47 ~ 63Hz<br><6.5mA peak / 530VAC<br>40A/400VAC         65A/480VAC<br>100 ~ 105% of rated current<br>Protection type : Constant current limiting, unit will shutdown after 5 sec. re-power on to recover<br>Protection type : Shut down o/p voltage, re-power on to recover<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>20 ~ 90% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes<br>SHP-10K: 460*211*83.5mm (L*W*H)          SHP-10K-L: 460*216*83.5mm (L*W*H)<br>SHP-10K:<br>SHP-10K-L:<br>11.9Kg; 1pcs/11.9Kg/1.25CUFT<br>/1.1CUFT<br>11.9Kg; 1pcs/11.9Kg<br>281.2K hrs min.<br>Telcordia SR-332 (Bellcore) ; 28K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>96%<br>15.7A/400VAC          13A/480VAC<br>94.5%<br>11.2A/400VAC     9.5A/480VAC<br>145 ~ 166V<br>60.5 ~ 69.1V<br>96.5%<br>273 ~ 312V<br>96.5%<br>420 ~ 480V<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>0.6Vp-p<br>0.3Vp-p<br>1Vp-p<br>1Vp-p<br>90 ~ 138V<br>39 ~ 57.6V<br>170 ~ 260V<br>260 ~ 400V<br>115V<br>55V<br>230V<br>380V<br>87A<br>131A<br>43.5A<br>26.3A<br>0 ~ 87A<br>0 ~ 150A<br>0 ~ 46.3A<br>0 ~ 30A<br>10000W<br>7200W<br>48 ~ 57.6V<br>115 ~ 138V<br>216 ~ 260V<br>334 ~ 400V<br>10000W<br>10000W<br>**SHP-10K-115**<br>**SHP-10K-55**<br>**SHP-10K-230**<br>**SHP-10K-380**<br>**POWER FACTOR (Typ.)**<br>≧0.98/400VAC/480VAC at full load<br>**SAFETY STANDARDS**<br>UL62368-1, CAN/CSA C22.2<br>, TUV<br>EN62368-1, EAC TP TC 004 approved<br>BS EN/<br>No. 62368-1<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.25KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**FUNCTION**<br>**EMC**<br>**(Note 5,7)**<br>**PROTECTION**<br>Shut down o/p voltage, recovers automatically after temperature goes down<br>**Parameter**<br>**Parameter**<br>ESD<br>Radiated<br>EFT / Burst<br>Surge<br>Conducted<br>Magnetic Field<br>Voltage Dips and Interruptions<br>Conducted<br>Radiated<br>Harmonic Current<br>Voltage Flicker<br>EN55024 , EN61204-3, EN61000-6-2<br>**Standard**<br>**Standard**<br>BS EN/EN55032 (CISPR32) / EN55011 (CISPR11)<br>BS EN/EN55032 (CISPR32) / EN55011 (CISPR11)<br>BS EN/EN61000-3-2<br>BS EN/EN61000-3-3<br>BS EN/EN61000-4-2<br>BS EN/EN61000-4-3<br>BS EN/EN61000-4-4<br>BS EN/EN61000-4-5<br>BS EN/EN61000-4-6<br>BS EN/EN61000-4-8<br>BS EN/EN61000-4-11<br>**Test Level / Note**<br>**Test Level / Note**<br>Level 3, 8KV air ; Level 2, 4KV contact<br>Level 3<br>Level 3<br>Level 3<br>Level 4<br>>95% dip 0.5 periods, 30% dip 25 periods,<br>>95% interruptions 250 periods<br>Class B<br>Class A<br>-----<br>-----<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**ALARM SIGNAL OUTPUT**<br>**REMOTE ON-OFF CONTROL**<br>**AUXILIARY POWER(AUX)**<br>Please refer to the Function Manual.<br>AC-OK,DC-OK, Fan Fail. Please refer to the Function Manual.<br>12V@1A tolerance<br>5%, ripple 150mVp-p<br>±<br>**CURRENT SHARING**<br>Up to 4 units. Please refer to the Function Manual<br>**OUTPUT VOLTAGE PROGRAMMABLE**<br>Can be adjusted via built-in potentiometer<br>Adjustment of output voltage is allowable between 50 ~ 120% of nominal output voltage. Please refer to the PV curve Function Manual<br>Adjustment of constant current level is allowable between 20 ~ 100% of rated current. Please refer to the PC<br>Function Manual<br>curve<br>**CONSTANT CURRENT LEVEL PROGRAMMABLE**<br>Level 4, 4KV/Line-Earth ; Level 3, 2KV/Line-Line<br>**DC-OK SIGNAL**<br>The TTL signal output, PSU turn on = -0.5 ~ 0.5V ; PSU turn off = 3.5 ~ 5.5V.  Please refer to the Function Manual<br>℃<br>ncludes set up tolerance,<br>derating curve<br>http://www.meanwell.com)<br>℃<br>℃<br>Under light load condition, output voltage ripple will exceed specification. The behavior can be minimized by increasing the load.<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>~~ti~~<br>_.02q.02.0224N2.Houo2<br>Ce<br>~~SS~~<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the<br>for more details.<br>5. Additional EMI filter is needed to meet regulations of EMC conducted and radiated emission. Characteristics of EMI filter please refer to the table, Minimum<br>Insertion Loss.<br>6. The efficiency is measured at 480VAC input.<br>7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on<br>a 600mm*900mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on<br>8. The ambient temperature derating of 3.5<br>/1000m with faniess models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. If use PV signal to adjust Vo, under certain operations conditions, ripple noise of Vo might slightly go over rating defined in this specification.<br>10<br>Product Liability Disclaimer<br>For detailed information, please refer to|**MODEL**<br>**DC VOLTAGE (factory default)**<br>**CURRENT (factory default)**<br>**CURRENT RANGE**<br>**RATED POWER (max.)**<br>**FULL POWER VOLTAGE RANGE**<br>**OUTPUT**<br>**VOLTAGE ADJ. RANGE**<br>**LINE REGULATION**<br>**LOAD REGULATION**<br>**SETUP, RISE TIME**<br>**HOLD UP TIME (Typ.)**<br>**VOLTAGE RANGE**<br>**Note.4**<br>**FREQUENCY RANGE**<br>**EFFICIENCY (Typ.)**<br>**Note.6**<br>**INPUT**<br>**INRUSH CURRENT (Typ.)**<br>**LEAKAGE CURRENT**<br>**OVER TEMPERATURE**<br>**WORKING TEMP.**<br>**WORKING HUMIDITY**<br>**STORAGE TEMP., HUMIDITY**<br>**TEMP. COEFFICIENT**<br>**VIBRATION**<br>**MTBF**<br>**DIMENSION**<br>**OTHERS**<br>**NOTE**<br>**PACKING**<br>**OVER LOAD**<br>**OVER VOLTAGE**<br>**AC CURRENT (Typ.)**<br>3000ms, 100ms at full load<br>25ms / 400VAC at 75% load          20ms / 400VAC at full load<br>3<br>3-wire / 340 ~ 530VAC<br>ψ<br>47 ~ 63Hz<br><6.5mA peak / 530VAC<br>40A/400VAC         65A/480VAC<br>100 ~ 105% of rated current<br>Protection type : Constant current limiting, unit will shutdown after 5 sec. re-power on to recover<br>Protection type : Shut down o/p voltage, re-power on to recover<br>-30 ~ +70<br>(Refer to "Derating Curve")<br>℃<br>20 ~ 90% RH non-condensing<br>-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃<br>±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)<br>10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes<br>SHP-10K: 460*211*83.5mm (L*W*H)          SHP-10K-L: 460*216*83.5mm (L*W*H)<br>SHP-10K:<br>SHP-10K-L:<br>11.9Kg; 1pcs/11.9Kg/1.25CUFT<br>/1.1CUFT<br>11.9Kg; 1pcs/11.9Kg<br>281.2K hrs min.<br>Telcordia SR-332 (Bellcore) ; 28K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>96%<br>15.7A/400VAC          13A/480VAC<br>94.5%<br>11.2A/400VAC     9.5A/480VAC<br>145 ~ 166V<br>60.5 ~ 69.1V<br>96.5%<br>273 ~ 312V<br>96.5%<br>420 ~ 480V<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±0.5%<br>±1.0%<br>±1.0%<br>±1.0%<br>±1.0%<br>0.6Vp-p<br>0.3Vp-p<br>1Vp-p<br>1Vp-p<br>90 ~ 138V<br>39 ~ 57.6V<br>170 ~ 260V<br>260 ~ 400V<br>115V<br>55V<br>230V<br>380V<br>87A<br>131A<br>43.5A<br>26.3A<br>0 ~ 87A<br>0 ~ 150A<br>0 ~ 46.3A<br>0 ~ 30A<br>10000W<br>7200W<br>48 ~ 57.6V<br>115 ~ 138V<br>216 ~ 260V<br>334 ~ 400V<br>10000W<br>10000W<br>**SHP-10K-115**<br>**SHP-10K-55**<br>**SHP-10K-230**<br>**SHP-10K-380**<br>**POWER FACTOR (Typ.)**<br>≧0.98/400VAC/480VAC at full load<br>**SAFETY STANDARDS**<br>UL62368-1, CAN/CSA C22.2<br>, TUV<br>EN62368-1, EAC TP TC 004 approved<br>BS EN/<br>No. 62368-1<br>**RIPPLE & NOISE (max.) Note.2**<br>**VOLTAGE TOLERANCE Note.3**<br>**WITHSTAND VOLTAGE**<br>**ISOLATION RESISTANCE**<br>I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.25KVAC<br>I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃<br>**ENVIRONMENT**<br>**SAFETY &**<br>**FUNCTION**<br>**EMC**<br>**(Note 5,7)**<br>**PROTECTION**<br>Shut down o/p voltage, recovers automatically after temperature goes down<br>**Parameter**<br>**Parameter**<br>ESD<br>Radiated<br>EFT / Burst<br>Surge<br>Conducted<br>Magnetic Field<br>Voltage Dips and Interruptions<br>Conducted<br>Radiated<br>Harmonic Current<br>Voltage Flicker<br>EN55024 , EN61204-3, EN61000-6-2<br>**Standard**<br>**Standard**<br>BS EN/EN55032 (CISPR32) / EN55011 (CISPR11)<br>BS EN/EN55032 (CISPR32) / EN55011 (CISPR11)<br>BS EN/EN61000-3-2<br>BS EN/EN61000-3-3<br>BS EN/EN61000-4-2<br>BS EN/EN61000-4-3<br>BS EN/EN61000-4-4<br>BS EN/EN61000-4-5<br>BS EN/EN61000-4-6<br>BS EN/EN61000-4-8<br>BS EN/EN61000-4-11<br>**Test Level / Note**<br>**Test Level / Note**<br>Level 3, 8KV air ; Level 2, 4KV contact<br>Level 3<br>Level 3<br>Level 3<br>Level 4<br>>95% dip 0.5 periods, 30% dip 25 periods,<br>>95% interruptions 250 periods<br>Class B<br>Class A<br>-----<br>-----<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>**ALARM SIGNAL OUTPUT**<br>**REMOTE ON-OFF CONTROL**<br>**AUXILIARY POWER(AUX)**<br>Please refer to the Function Manual.<br>AC-OK,DC-OK, Fan Fail. Please refer to the Function Manual.<br>12V@1A tolerance<br>5%, ripple 150mVp-p<br>±<br>**CURRENT SHARING**<br>Up to 4 units. Please refer to the Function Manual<br>**OUTPUT VOLTAGE PROGRAMMABLE**<br>Can be adjusted via built-in potentiometer<br>Adjustment of output voltage is allowable between 50 ~ 120% of nominal output voltage. Please refer to the PV curve Function Manual<br>Adjustment of constant current level is allowable between 20 ~ 100% of rated current. Please refer to the PC<br>Function Manual<br>curve<br>**CONSTANT CURRENT LEVEL PROGRAMMABLE**<br>Level 4, 4KV/Line-Earth ; Level 3, 2KV/Line-Line<br>**DC-OK SIGNAL**<br>The TTL signal output, PSU turn on = -0.5 ~ 0.5V ; PSU turn off = 3.5 ~ 5.5V.  Please refer to the Function Manual<br>℃<br>ncludes set up tolerance,<br>derating curve<br>http://www.meanwell.com)<br>℃<br>℃<br>Under light load condition, output voltage ripple will exceed specification. The behavior can be minimized by increasing the load.<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>~~ti~~<br>_.02q.02.0224N2.Houo2<br>Ce<br>~~SS~~<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the<br>for more details.<br>5. Additional EMI filter is needed to meet regulations of EMC conducted and radiated emission. Characteristics of EMI filter please refer to the table, Minimum<br>Insertion Loss.<br>6. The efficiency is measured at 480VAC input.<br>7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on<br>a 600mm*900mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on<br>8. The ambient temperature derating of 3.5<br>/1000m with faniess models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. If use PV signal to adjust Vo, under certain operations conditions, ripple noise of Vo might slightly go over rating defined in this specification.<br>10<br>Product Liability Disclaimer<br>For detailed information, please refer to|**SHP-10K-55**|**SHP-10K-115**|**SHP-10K-115**|**SHP-10K-230**|**SHP-10K-230**|**SHP-10K-380**|
|---|---|---|---|---|---|---|---|
||**DC VOLTAGE (factory default)**|55V|115V||230V||380V|
||**CURRENT (factory default)**|131A|87A||43.5A||26.3A|
||**CURRENT RANGE**|0 ~ 150A|0 ~ 87A||0 ~ 46.3A||0 ~ 30A|
||**RATED POWER (max.)**|7200W|10000W||10000W||10000W|
||**FULL POWER VOLTAGE RANGE**|48 ~ 57.6V|115 ~ 138V||216 ~ 260V||334 ~ 400V|
||**RIPPLE & NOISE (max.) Note.2**|0.3Vp-p|0.6Vp-p||1Vp-p||1Vp-p|
||**VOLTAGE ADJ. RANGE**|90 ~ 138V<br>39 ~ 57.6V<br>170 ~ 260V<br>260 ~ 400V<br>Can be adjusted via built-in potentiometer||||||
||**VOLTAGE TOLERANCE Note.3**|±1.0%|±1.0%||±1.0%||±1.0%|
||**LINE REGULATION**|±0.5%|±0.5%||±0.5%||±0.5%|
||**LOAD REGULATION**|±0.5%|±0.5%||±0.5%||±0.5%|
||**SETUP, RISE TIME**|3000ms, 100ms at full load||||||
||**HOLD UP TIME (Typ.)**|25ms / 400VAC at 75% load          20ms / 400VAC at full load||||||
||**VOLTAGE RANGE**<br>**Note.4**|3<br>3-wire / 340 ~ 530VAC<br>ψ||||||
||**FREQUENCY RANGE**|47 ~ 63Hz||||||
||**POWER FACTOR (Typ.)**|≧0.98/400VAC/480VAC at full load||||||
||**EFFICIENCY (Typ.)**<br>**Note.6**|94.5%|96%||96.5%||96.5%|
||**AC CURRENT (Typ.)**|11.2A/400VAC     9.5A/480VAC|15.7A/400VAC          13A/480VAC|||||
||**INRUSH CURRENT (Typ.)**|40A/400VAC         65A/480VAC||||||
||**LEAKAGE CURRENT**|<6.5mA peak / 530VAC||||||
||**OVER LOAD**<br>~~ti~~|100 ~ 105% of rated current<br>Protection type : Constant current limiting, unit will shutdown after 5 sec. re-power on to recover<br>~~ti~~<br>_.02q.02.0224N2.Houo2||||||
||**OVER VOLTAGE**<br>~~ti~~<br>Ce|Protection type : Shut down o/p voltage, re-power on to recover<br>145 ~ 166V<br>60.5 ~ 69.1V<br>273 ~ 312V<br>420 ~ 480V<br>~~ti~~<br>_.02q.02.0224N2.Houo2<br>Ce||||||
||**OVER TEMPERATURE**<br>~~ti~~<br>Ce|Shut down o/p voltage, recovers automatically after temperature goes down<br>~~ti~~<br>_.02q.02.0224N2.Houo2<br>Ce||||||
||**CURRENT SHARING**<br>Ce|Up to 4 units. Please refer to the Function Manual<br>Ce||||||
||**OUTPUT VOLTAGE PROGRAMMABLE**|Adjustment of output voltage is allowable between 50 ~ 120% of nominal output voltage. Please refer to the PV curve Function Manual||||||
||**CONSTANT CURRENT LEVEL PROGRAMMABLE**|Adjustment of constant current level is allowable between 20 ~ 100% of rated current. Please refer to the PC<br>Function Manual<br>curve||||||
||**AUXILIARY POWER(AUX)**|12V@1A tolerance<br>5%, ripple 150mVp-p<br>±||||||
||**REMOTE ON-OFF CONTROL**|Please refer to the Function Manual.||||||
||**ALARM SIGNAL OUTPUT**|AC-OK,DC-OK, Fan Fail. Please refer to the Function Manual.||||||
||**DC-OK SIGNAL**|The TTL signal output, PSU turn on = -0.5 ~ 0.5V ; PSU turn off = 3.5 ~ 5.5V.  Please refer to the Function Manual||||||
||**WORKING TEMP.**|-30 ~ +70<br>(Refer to "Derating Curve")<br>℃||||||
||**WORKING HUMIDITY**|20 ~ 90% RH non-condensing||||||
||**STORAGE TEMP., HUMIDITY**|-40 ~ +85<br>, 10 ~ 95% RH non-condensing<br>℃||||||
||**TEMP. COEFFICIENT**|±<br>℃<br>℃<br>0.03%/<br>(0 ~ 50<br>)||||||
||**VIBRATION**|10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes||||||
||**SAFETY STANDARDS**|UL62368-1, CAN/CSA C22.2<br>, TUV<br>EN62368-1, EAC TP TC 004 approved<br>BS EN/<br>No. 62368-1||||||
||**WITHSTAND VOLTAGE**|I/P-O/P:3.75KVAC     I/P-FG:2KVAC     O/P-FG:1.25KVAC||||||
||**ISOLATION RESISTANCE**|I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25<br>/ 70% RH<br>℃||||||
||**MTBF**<br>**EMC IMMUNITY**<br>**EMC EMISSION**<br>~~SS~~|**Parameter**||**Standard**||**Test Level / Note**||
|||Conducted||BS EN/EN55032 (CISPR32) / EN55011 (CISPR11)||Class B||
|||Radiated||BS EN/EN55032 (CISPR32) / EN55011 (CISPR11)||Class A||
|||Harmonic Current||BS EN/EN61000-3-2||-----||
|||Voltage Flicker||BS EN/EN61000-3-3||-----||
|||EN55024 , EN61204-3, EN61000-6-2||||||
|||**Parameter**||**Standard**||**Test Level / Note**||
|||ESD||BS EN/EN61000-4-2||Level 3, 8KV air ; Level 2, 4KV contact||
|||Radiated||BS EN/EN61000-4-3||Level 3||
|||EFT / Burst||BS EN/EN61000-4-4||Level 3||
|||Surge||BS EN/EN61000-4-5||Level 4, 4KV/Line-Earth ; Level 3, 2KV/Line-Line||
|||Conducted||BS EN/EN61000-4-6||Level 3||
|||Magnetic Field||BS EN/EN61000-4-8||Level 4||
|||Voltage Dips and Interruptions||BS EN/EN61000-4-11||>95% dip 0.5 periods, 30% dip 25 periods,<br>>95% interruptions 250 periods||
|||281.2K hrs min.<br>Telcordia SR-332 (Bellcore) ; 28K hrs min.      MIL-HDBK-217F (25<br>)<br>℃<br>~~SS~~||||||
||**DIMENSION**<br>~~SS~~|SHP-10K: 460*211*83.5mm (L*W*H)          SHP-10K-L: 460*216*83.5mm (L*W*H)<br>~~SS~~||||||
||**PACKING**<br>SHP-10K:<br>SHP-10K-L:<br>11.9Kg; 1pcs/11.9Kg/1.25CUFT<br>/1.1CUFT<br>11.9Kg; 1pcs/11.9Kg<br>℃<br>ncludes set up tolerance,<br>derating curve<br>http://www.meanwell.com)<br>℃<br>℃<br>Under light load condition, output voltage ripple will exceed specification. The behavior can be minimized by increasing the load.<br>※<br>：<br>https://www.meanwell.com/serviceDisclaimer.aspx<br>~~SS~~<br>1. All parameters NOT specially mentioned are measured at400VAC input, rated load and 25 _ of ambient temperature.<br>2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.<br>3. Tolerance<br>line regulation and load regulation.<br>4. Derating may be needed under low input voltages. Please check the<br>for more details.<br>5. Additional EMI filter is needed to meet regulations of EMC conducted and radiated emission. Characteristics of EMI filter please refer to the table, Minimum<br>Insertion Loss.<br>6. The efficiency is measured at 480VAC input.<br>7. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on<br>a 600mm*900mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to<br>perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on<br>8. The ambient temperature derating of 3.5<br>/1000m with faniess models and of<br>5<br>/1000m with fan models for operating altitude higher than 2000m(6500ft).<br>9. If use PV signal to adjust Vo, under certain operations conditions, ripple noise of Vo might slightly go over rating defined in this specification.<br>10<br>Product Liability Disclaimer<br>For detailed information, please refer to|||||||



derating curve 

perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 8. The ambient temperature derating of 3.5 ℃ /1000m with faniess models and of 5 ℃ /1000m with fan models for operating altitude higher than 2000m(6500ft). 9. If use PV signal to adjust Vo, under certain operations conditions, ripple noise of Vo might slightly go over rating defined in this specification. 10 Under light load condition, output voltage ripple will exceed specification. The behavior can be minimized by increasing the load. ※ Product Liability Disclaimer ： For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx 

_File Name:SHP-10K-SPEC   2022-07-27_ 

**SHP - 10K series** 

## 10KW 3ψ3W High Efficiency Digital Power Supply 

## **BLOCK DIAGRAM** 

**==> picture [500 x 606] intentionally omitted <==**

**----- Start of picture text -----**<br>
PFC fosc : 60KHz<br>PWM fosc : 70KHz<br>EMI RECTIFIERS POWER RECTIFIERS +V<br>I/P & &<br>FILTER PFC SWITCHING FILTER -V<br>DETECTION PWM O.V.P.<br>CIRCUIT CONTROL<br>DETECTION<br>CIRCUIT<br>O.L.P.<br>PV/PC ENABLE<br>MCU ISOLATOR<br>O.T.P.<br>PV/PC<br>TRANSCEIVERS DA/DB<br>MCU<br>FAN-FAIL<br>POWERAUX ATORISOL MCU ISOLATIONDATA AC-OKT-ALARMDC-OK<br>(SDA/SCL)<br>(CANH/CANL)<br>RECTIFIERS AUX POWER (DATA+/DATA-)<br>&<br>FILTER (12V/1A)<br>REMOTE ON-OFF<br>FAN<br>(Fan cooling model only)<br>DERATING CURVE<br>Blank Type:<br>100<br>80<br>60<br>50<br>40<br>20<br>-30 0 10 20 30 40 50 60 70 (HORIZONTAL)<br>AMBIENT TEMPERATURE ( ℃ )<br>L Type:<br>100 100<br>80 80<br>60 60 for 55V<br>50 50<br>40 40<br>25<br>20 20<br>for other<br>-30 0 10 20 30 40 50 60 70 (HORIZONTAL) -30 0 10 20 30 40 50 55 60 70 (HORIZONTAL)<br>AMBIENT TEMPERATURE WITH WATER COOLING SYSTEM ( ℃ ) AMBIENT TEMPERATURE WITH 85CFM FAN*2<br>LOAD (%)<br>LOAD (%)<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

**==> picture [503 x 691] intentionally omitted <==**

**----- Start of picture text -----**<br>
L Type:<br>100<br>80<br>for other<br>60 for 55V<br>40<br>20<br>-40 -25 0 20 30 40 50 60 (HORIZONTAL)<br>Tcase ( ℃ )<br>STATIC CHARACTERISTICS EFFICIENCY VS LOAD (380V MODEL)<br>100<br>97<br>95<br>100<br>90<br>90 480VAC& 334VDC<br>85<br>80 400VAC& 334VDC<br>80<br>70 480VAC & 380VDC<br>75<br>60 400VAC& 380VDC<br>70<br>50<br>65<br>10% 20% 30% 40% 50% 60% 70% 80% 90% 100%<br>340 360 380 400 420 440 460 480 500 525 530<br>LOAD<br>INPUT VOLTAGE (V) 60Hz<br>AC Power Connection<br>◎ψ3 3-wire / △ 340VAC~530VAC T SHP-10K<br>L3<br>L2<br>L1<br>S<br>R FG<br>Fig 1.1<br>◎ψ3 3-wire / Y 340VAC~530VAC<br>T SHP-10K<br>L3<br>L2<br>L1<br>S<br>FG<br>R<br>Fig 1.2<br>EFFICIENCY (%)<br>340V~530VAC<br>340V~530VAC<br>LOAD (%)<br>LOAD (%)<br>340V~530VAC<br>340V~530VAC<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

## **Function Manual** 

**==> picture [490 x 574] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.Output Voltage Programming (or, PV / remote voltage programming / remote adjust / margin programming / dynamic voltage trim)<br>(1)Default by potentiometer (SVR) ON 1 2 3<br>(a)Have the DIP switch position-3 set as OFF<br>(b)Output voltage can be trimmed by SVR.<br>(2)By Output Voltage Programming ON 1 2 3<br>(a)Have the DIP switch position-3 set as OFF<br>(b)The output voltage can be trimmed to 50~120% by applying EXTERNAL VOLTAGE between PV+ and PV- on CN53.<br>DIP SW1<br>DIP SW<br>CN86<br>CN53<br>(Fine adjustments)<br>(Main Adjustments)<br>DIP<br>SW81<br>-V<br>PIN1,2 -V(Signal)<br>LOAD<br>+V<br>PIN3,4 PV+<br>EXTERNAL VOLTAGE (DC)(0~5V)<br>Fig 1.1<br>Vout<br>100<br>120<br>83.3<br>114.5113.7 55V(Default) 80<br>106.5 380V(Default) 70<br>100 230V(Default) 60<br>Non-Linear 40 L type Blank type<br>50 20<br>V<br>24 43.2 48 57.6<br>V 55V<br>0 1 4 4.37 4.41 4.7 4.8 57.5 103.5 115 138<br>115V<br>EXTERNAL VOLTAGE (DC) 108 194.4 216 260<br>230V<br>◎ The 100% output voltage is 48/115/216/334V. 167 300.6 334 400 380V<br>OUTPUT VOLTAGE<br>◎ The rated current should change with the Output Voltage Programming accordingly.<br>Fig 1.2<br>OUTPUT  VOLTAGE(%)<br>OUTPUT CURRENT (%)<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.Constant Current Programming (or, PC / remote current programming / dynamic current trim)<br>(1)Default Overload Protection(OLP) value ON 1 2 3<br>(a)Have the DIP switch position-2 set as OFF<br>(b)Output current is set default value.<br>(2)By Constant Current Level Programming ON 1 2 3<br>(a)Have the DIP switch position-2 set as OFF<br>(b)The constant current level can be trimmed to 20~100% of the rated current by applying EXTERNAL VOLTAGE between PC+ and PC- on CN53.<br>DIP SW1<br>CN86<br>CN53<br>SVR<br>DIP<br>SW81<br>-V<br>PIN1,2 -V(Signal)<br>LOAD<br>+V<br>PIN5,6 PC+<br>EXTERNAL VOLTAGE (DC)(0~5V)<br>Fig 2.1<br>※ Under PC function at wattage < 4KW, the power supply might enter burst mode and cause output unstable, please increase the load to minimized the effect.<br>※ Auto de-rating function covered by over temperature protection, it works either in PC mode or under control by communication protocol.<br>T1(Typ.): Maximum ambient temperature of full load.<br>T2(Typ.): T1+5℃.<br>Iout<br>110 100<br>100<br>80 Non-Linear<br>Non-Linear<br>60<br>50<br>40<br>20 20<br>V<br>0 1 4.7 4.8 T1 T2 (HORIZONTAL)<br>EXTERNAL VOLTAGE (DC) AMBIENT TEMPERATURE  ( ℃ )<br>◎ The 100% output current is 150/87/46.3/30A.<br>Fig 2.2<br>LOAD (%)<br>OUTPUT  CURRENT(%)<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

**==> picture [511 x 668] intentionally omitted <==**

**----- Start of picture text -----**<br>
3.DA, DB signal and parallel control function<br>(1)Non-parallel operation ON 1 2 3<br>(a)set the DIP switch of postion-1 as OFF<br>(b)By default, non-parallel operation.<br>(2)Default parallel operation ON 1 2 3<br>(a)set the DIP switch of postion-1 as OFF<br>(b)PSUs are configured in parallel operation.<br>DIP SW1<br>CN86<br>CN53<br>SVR<br>DIP<br>SW81<br>Fig 3.1<br>4.Remote ON-OFF Control<br>※ The power supply can be turned ON-OFF by using the "Remote ON-OFF" function.<br>Between Remote ON-OFF ( CN86  pin1 ) and 5V-AUX( CN86 pin 2) Output Status<br>Switch close (Short) power supply ON<br>Switch open (Open) power supply OFF<br>Table 4.1<br>CN86<br>CN53<br>SVR<br>DIP<br>SW81<br>PIN1 Remote ON-OFF PIN2 +5V-AUX<br>Fig 4.1<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

## 10KW 3ψ3W High Efficiency Digital Power Supply **SHP - 10K series** 

## **5.Alarm Signal Output** 

**==> picture [484 x 279] intentionally omitted <==**

**----- Start of picture text -----**<br>
※ There are 4 alarm signals, DC-OK, T-ALARM, Fan Fail and AC-OK, in TTL signal form, on CN86. These signals are isolated from output.<br>DC-OK & T-ALARM & Fan Fail Signal Power Supply Status<br>“High” >3.5~5.5V OFF<br>“Low” <-0.5~0.5V ON<br>CN86 AC-OK Signal Power Supply Status<br>CN53<br>“High” >3.5~5.5V ON<br>SVR “Low” <-0.5~0.5V OFF<br>DIP<br>SW<br>PIN4,6,8,10 GND-AUX<br>PIN3 T-ALARM Application<br>Circuit<br>PIN5 Fan Fail<br>PIN7 DC-OK<br>PIN9 AC-OK<br>Fig 5.1<br>**----- End of picture text -----**<br>


- ※ DC OK might mis-triggered when the voltage difference between PSU and the load, please minimized the unnecessary voltage difference. 

_File Name:SHP-10K-SPEC 2022-07-27_ 

10KW 3ψ3W High Efficiency Digital Power Supply **SHP - 10K series** 

## **6.Current Sharing** 

SHP-10K has the built-in active current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below : ※ The power supplies should be paralleled using short and large diameter wiring and then connected to the load. 

- ※ In parallel connection, power supply with the highest output Voltage will be the master unit and its Vout will be the DC bus voltage. ※ The total output current must not exceed the value determined  by the following equation: Maximum output current at parallel operation=(Rated current per unit)×(Number of unit)×0.95 

- ※ When the total output current is less than 5% of the total rated current, or say (5% of Rated current per unit)×(Number of unit) the current shared among units may not be balanced. 

- ※ Under parallel operation ripple of the output voltage may be higher than the SPEC at light load condition. It will go back to normal ripple level once the output load is more than 5%. 

※ CN53/SW1 Function pin connection 

**==> picture [443 x 465] intentionally omitted <==**

**----- Start of picture text -----**<br>
PSU1 PSU2 PSU3 PSU4<br>Parallel<br>CN53 SW1 PIN1 CN53 SW1 PIN1 CN53 SW1 PIN1 CN53 SW1 PIN1<br>1 unit X ON<br>2 unit V ON V ON<br>3 unit V ON V OFF V ON<br>4 unit V ON V OFF V OFF V ON<br>(V : CN53 connected ; X : CN53 not connected.)<br>PSU1 PSU2 PSU3 PSU4<br>+V -V<br>LOAD<br>Fig 6.1<br>7 9 7 9 7 9 7 9<br>DB DA DB DA DB DA DB DA<br>PSU1 PSU2 PSU3 PSU4<br>CN53 DB DA CN53 DB DA CN53 DB DA CN53 DB DA<br>8 10 8 10 8 10 8 10<br>If the lines of CN53 are too long, they should<br>be twisted in pairs to avoid the noise.<br>◎ DA,DB are connected mutually in parallel.<br>∣ ∣ ∣ ∣ ∣ ∣<br>∣ ∣ ∣ ∣<br>∣ ∣<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

10KW 3ψ3W High Efficiency Digital Power Supply 

## **SHP - 10K series** 

## **Mechanical Specification** 

**==> picture [489 x 491] intentionally omitted <==**

**----- Start of picture text -----**<br>
※  Forced-Air Cooling (Blank type) Case No.223          Unit:mm<br>460<br>431.75<br>94.75 39.25<br>4-M4 L=5mm<br>1 1<br>CN53 CN86<br>1 3 5 7 9 18 16 14 1210 8 6 4 2<br>2 4 6 8 10 17 15 13 11 9 7 5 3 1<br>383 45.9<br>18 2<br>DIP1  2  3-SW1712 CN53CN86109 1<br>LED SVR SVR<br>4-M4 L=5mm<br>1 1 -V<br>Air flow<br>direction<br>+V<br>1 1<br>4 3 2 1<br>10 13<br>94.75<br>4-M4 L=5mm<br>1 1<br>18 max.<br>※ Mounting Instruction Chassis of SHP-10K<br>Hole No. Recommended Screw Size MAX. Penetration Depth  L Recommended mounting torque Mounting Surface<br>1 M4 5mm 7~1  K0 gf-cm<br>Mounting Screw<br>11.8<br>11.7<br>83.5 60<br>17<br>45.45<br>128 211<br>60<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

10KW 3ψ3W High Efficiency Digital Power Supply 

## **SHP - 10K series** 

※ **Water Cooling (L type)** 

Case No.223D          Unit:mm 

**==> picture [423 x 294] intentionally omitted <==**

**----- Start of picture text -----**<br>
CN53 CN86<br>1 3 5 7 9 18 16 14 1210 8 6 4 2<br>2 4 6 8 10 17 15 13 11 9 7 5 3 1<br>460<br>451 4.5<br>18 2<br>1  2  317 1 CN53CN86 9 1<br>257.5 DIP-SW 2 10 LED SVR SVR<br>4-ψ7.5 244.5<br>-V<br>T case +V<br>tc<br>2-ψ15<br>4 3 2 1<br>265 10 13<br>�tc : Max. Case Temperature<br>83.5<br>24<br>50.5 50.5<br>124<br>115 115 216<br>80<br>**----- End of picture text -----**<br>


18 max. 

_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

|※C|1<br>9<br>10<br>2<br>ontrol Pin No. Assignment<br>: HRS DF11-10DP-2DS or equivalent<br>(<br>3)<br>CN5<br>Mating Housing<br>Terminal<br>HRS DF11-10DS or equivalent<br>HRS DF11-**SC or equivalent|1<br>9<br>10<br>2<br>ontrol Pin No. Assignment<br>: HRS DF11-10DP-2DS or equivalent<br>(<br>3)<br>CN5<br>Mating Housing<br>Terminal<br>HRS DF11-10DS or equivalent<br>HRS DF11-**SC or equivalent|1<br>9<br>10<br>2<br>ontrol Pin No. Assignment<br>: HRS DF11-10DP-2DS or equivalent<br>(<br>3)<br>CN5<br>Mating Housing<br>Terminal<br>HRS DF11-10DS or equivalent<br>HRS DF11-**SC or equivalent|1<br>9<br>10<br>2<br>ontrol Pin No. Assignment<br>: HRS DF11-10DP-2DS or equivalent<br>(<br>3)<br>CN5<br>Mating Housing<br>Terminal<br>HRS DF11-10DS or equivalent<br>HRS DF11-**SC or equivalent|1<br>9<br>10<br>2<br>ontrol Pin No. Assignment<br>: HRS DF11-10DP-2DS or equivalent<br>(<br>3)<br>CN5<br>Mating Housing<br>Terminal<br>HRS DF11-10DS or equivalent<br>HRS DF11-**SC or equivalent|1<br>9<br>10<br>2<br>ontrol Pin No. Assignment<br>: HRS DF11-10DP-2DS or equivalent<br>(<br>3)<br>CN5<br>Mating Housing<br>Terminal<br>HRS DF11-10DS or equivalent<br>HRS DF11-**SC or equivalent|
|---|---|---|---|---|---|---|
|Pin No.||Function||||Description|
|1,2||-V(Signal)||||Negative output voltage signal. It is for local sense and certain function reference; it cannot be connected directly to the load.|
|3,4||PV+||||Connection for output voltage programming. (Note)|
|5,6||PC+||||Connection for constant current level programming. (Note)|
|7,8||DB||||Differential digital signal for parallel control. (Note)|
|9,10||DA||||Differential digital signal for parallel control. (Note)|
|Note: Non-isolated signal, referenced to [-V(Signal)].<br>18<br>2<br>1<br>17<br>※Control Pin No. Assignment<br>: HRS DF11-18DP-2DS or equivalent<br>(<br>)<br>CN86<br>Mating Housing<br>Terminal<br>HRS DF11-18DS or equivalent<br>HRS DF11-**SC or equivalent|||||||
|**Pin No.**|||**Function**||**Description**||
|1|||Remote<br>ON-OFF||The unit can turn the output ON/OFF by dry contact between Remote ON/OFF and +5-AUX.(Note)<br>Short (4.5 ~ 5.5V) : Power ON ; Open(0 ~ 0.5V) : Power OFF ; The maximum input voltage is 5.5V||
|2|||+5V-AUX||Auxiliary voltage output, 4.5~5.5V, referenced to GND-AUX (pin 4,6,8,10,17,18) only for Remote ON/OFF used. This output is not<br>controlled by the Remote ON/OFF control.||
|3|||T-ALARM||High (3.5 ~ 5.5V) : When the internal temperature exceeds the limit of temperature alarm.<br>Low (-0.5 ~ 0.5V) : When the internal temperature is normal.<br>The maximum sourcing current is 10mA and only for output.(Note)||
|4,6,8,10|||GND-AUX||Auxiliary voltage output GND.<br>The signal return is isolated from the output terminals (+V & -V).||
|5||||Fan Fail|High(3.5~5.5V):When the fan fail.<br>Low(-0.5~0.5V):When the fan works normally.<br>The maximum sourcing current is 10mA and only for output.(Note)||
|7||||DC-OK|High(3.5 ~ 5.5V) :  When Vout<br>80%<br>6%.<br>≦<br>±<br>Low(-0.5 ~ 0.5V) :  When Vout<br>80%<br>6%.<br>≧<br>±<br>The maximum sourcing current is 10mA and only for output.(Note)||
|9||||AC-OK|High (3.5 ~ 5.5V): When AC input<br>335<br>≧<br>±1.5%Vac, PSU works normally.<br>Low (-0.5 ~ 0.5V): When AC input<br>3<br>≦<br>±<br>20<br>1.5%Vac, PSU shut down.<br>The maximum sourcing current is 10mA and only for output.(Note)||
|11,12|||SCL/CANL/<br>DATA-||For PMBus model: Serial Clock used in the PMBus interface.(Note)||
||||||For CANBus model: Data line used in CANBus interface.(Note)||
||||||For MODBus model: Data line used in MODBus interface.(Note)||
|13,14|||SDA/CANH/<br>DATA+||For PMBus model: Serial Data used in the PMBus interface.(Note)||
||||||For CANBus model: Data line used in CANBus interface.(Note)||
||||||For MODBus model: Data line used in MODBus interface.(Note)||
|15,16|||+12V-AUX||Auxiliary voltage output, 11.4~12.6V, referenced to GND-AUX (pin17 & 18).<br>The maximum load current is 1A. This output is not controlled by “Remote ON-OFF”.||
|17,18|||GND-AUX||Auxiliary voltage output GND.<br>The signal return is isolated from the output terminals(+V & -V).||



Note: Isolated signal, referenced to (GND-AUX). 

_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

## 10KW 3ψ3W High Efficiency Digital Power Supply 

**==> picture [454 x 248] intentionally omitted <==**

**----- Start of picture text -----**<br>
※LED Status Indicators<br>LED Description<br>Green(LED1) LED on when output voltage is OK<br>Red(LED2) LED on when any protection occurs<br>※AC Input Terminal Pin No. Assignment (TB1)<br>Pin No. Assignment Diagram Maximum mounting torque<br>1 FG<br>2 AC/L1<br>18Kgf-cm<br>3 AC/L2<br>4 AC/L3<br>※DIP Switch Position Assignment(DIP-SW1): Please refer to the Function Manual.<br>Pin No. Assignment Diagram<br>1 DA,DB Signal and paralled control function 1 2 3<br>2 Output Current Programming (PC) OFFON DIP-SW PIN2:PCDIP-SW PIN3:PV<br>3 Output Voltage Programming (PV)<br>※DIP Switch Position Assignment(DIP-SW81): Please refer to the Function Manual.<br>Pin No. Function Description<br>1 A0<br>2 A1 PMBus/CANBus/MODBus interface address switch. (Max. 8 address)<br>3 A2<br>4 RL Termination resistors(120Ω) for communication.(CANBUS、MODBUS)<br>**----- End of picture text -----**<br>


## **GUIDANCE OF ADDITIONAL FILTER** 

**==> picture [315 x 374] intentionally omitted <==**

**----- Start of picture text -----**<br>
1.Schematic<br>L1 L1'<br>L L<br>L2 L2'<br>L L<br>L3 L3'<br>Cx Cx R1<br>LINE Cy R2 LOAD<br>PE PE<br>2.Minimum insertion loss (In dB at 50 Ω system): Filter model FN3288-20-33-C35-R65 or equivalent<br>FREQ. MHz 0.01 0.05 0.10 0.15 0.50 1.0 5.0 10 30<br>COM. MODE dB 20 47 61 66 100 83 62 49 30<br>DIF. MODE dB 13 16 47 58 87 86 80 79 65<br>3.Minimum Impedance: Core model 4A11 or equivalent<br>FREQ. MHz 10 20 30 50 60 80 90 100 120<br>Z(Ω) 70.5 93.7 111 136 145 156 160 166 180<br>4.Configration<br>SHP-10K<br>EMI AC DC<br>LOAD<br>FILTER I/P O/P<br>AC Utility CORE<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

## 10KW 3ψ3W High Efficiency Digital Power Supply 

## **1.Suitable for water cooling (L type)** 

Ambient temperature: 50℃ Inlet temperature��5~15℃ Flow rate (minimum)� 4~ 10LPM Humidity: 20~90% RH non-condensing Pressure drop 6 psi (minimum), pressure inlet 80 psi, pressure inlet 80 psi (maximum) If optional cold plate is in need, please contact MEAN WELL for details. Ordering No.:HS-684 

**==> picture [493 x 513] intentionally omitted <==**

**----- Start of picture text -----**<br>
Pressure drop 6 psi (minimum), pressure inlet 80 psi, pressure inlet 80 psi (maximum)<br>If optional cold plate is in need, please contact MEAN WELL for details.<br>Ordering No.:HS-684<br>505<br>478<br>478<br>216.7<br>27 M6*16<br>Water Output<br>Apply thermal grease (gap filler) between power supply<br>and cold plate connection surface.<br>Thermal grease (gap filler) :<br>ψ7*4 * Thermal conductivity is no less than 1W/mK.<br>ψ13*4 Water Input * Thickness is no more than 0.3mm.<br>216.7<br>233.5<br>M6*2(combination screw)<br>L>7mm<br>M6*4<br>L>7mm<br>24<br>73 50.5<br>165.5 147.9 142<br>**----- End of picture text -----**<br>


_File Name:SHP-10K-SPEC 2022-07-27_ 

**SHP - 10K series** 

10KW 3ψ3W High Efficiency Digital Power Supply 

**==> picture [102 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
2.With 85CFM forced air (L type)<br>**----- End of picture text -----**<br>


**==> picture [58 x 127] intentionally omitted <==**

**----- Start of picture text -----**<br>
85CFM x 2<br>FAN<br>Air flow<br>direction<br>FAN<br>100mm<br>**----- End of picture text -----**<br>


## **Installation Manual** 

Please refer to : http://www.meanwell.com/manual.html 

_File Name:SHP-10K-SPEC 2022-07-27_
Updated at June 6, 2026
About Novapart

Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →
Stock Shortage Specialist

When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →
Compliant Alternatives

We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →