SG-TL70-RGB14C

TL70 Multicolor RGB Tower Light Module 

## Overview 

**==> picture [500 x 40] intentionally omitted <==**

**----- Start of picture text -----**<br>
Models Housing Colors Housing Color<br>SG-TL70-RGB14 Black<br>TL70 Segment RGB14<br>SG-TL70-RGB14C Gray<br>**----- End of picture text -----**<br>


For more information regarding TL70 Multicolor RGB Tower Light final assemblies, including wiring diagrams, refer to the following documents: 

- TL70 Modular Tower Light datasheet (p/n 182214) 

- TL70 Wireless Modular Tower Light datasheet (p/n 185469) 

- • TL70 Modular Tower Light AC voltage datasheet (p/n 191349) 

## Configuring the Module 

Turn on the appropriate DIP switch to set the order of the components, counting up from the tower light's base. Factory default DIP position is OFF. 

**==> picture [500 x 474] intentionally omitted <==**

**----- Start of picture text -----**<br>
Black DIP Switch<br>Assembly Options<br>1B 2B 3B 4B 5B 6B 7B 8B<br>Red ON<br>Green ON<br>Yellow ON ON<br>Blue ON<br>Magenta ON ON<br>Cyan ON ON<br>White ON ON ON<br>Amber ON<br>Color Selection<br>Rose ON ON<br>Lime Green ON ON<br>Orange ON ON ON<br>Sky Blue ON ON<br>Violet ON ON ON<br>Spring Green ON ON ON<br>Color Demo<br>Flash Demo ON ON ON ON<br>Solid On<br>0.5 Hz Flash ON<br>1.5 Hz Flash ON<br>3.0 Hz Flash ON ON<br>Flashing and Strobing<br>0.5 Hz Strobe ON<br>1.5 Hz Strobe ON ON<br>3.0 Hz Strobe ON ON<br>Intensity Sweep ON ON ON<br>High<br>Intensity<br>Low ON<br>White DIP Switches<br>Assembly Options<br>1 2 3 4 5 6<br>Module 1 ON<br>Module 2 ON<br>Position Module 3 ON<br>Module 4 ON<br>Module 5 ON<br>Continued on page 2<br>**----- End of picture text -----**<br>


**==> picture [52 x 31] intentionally omitted <==**

Original Instructions 19-Aug-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 202345 Rev. A 

TL70 Multicolor RGB Tower Light Module 

**==> picture [484 x 449] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||
|---|---|---|---|---|---|---|---|---|
|Continued from page 1|
|White DIP Switches|
|Assembly Options|
|1|2|3|4|5|6|
|Module 6|ON|
|Specifications|
|Supply Voltage and Current|Required Overcurrent Protection|Certifications|
|12 V DC to 30 V DC|
|Maximum current in high intensity mode: 350 mA|Banner Engineering BV|
|max. at 12 V DC; 170 mA typical at 24 V DC|WARNING:|Electrical|Park Lane, Culliganlaan 2F bus 3|
|Maximum current in low intensity mode: 140 mA|connections must be|Ce|1831 Diegem, BELGIUM|
|max. at 12 V DC; 70 mA typical at 24 V DC|made by qualified|
|personnel in|
|Supply Protection Circuitry|accordance with local|
|Protected against transient voltages|and national electrical|
|codes and|
|Indicator Response Time|
|regulations.|
|Off Response: 150 µs (maximum) at 12 V DC to 30|
|V DC|
|On Response: 40 ms (maximum) at 12 V DC; 50|Overcurrent protection is required to be provided|
|ms (maximum) at 30 V DC|by end product application per the supplied table.|
|Indicator Characteristics|Overcurrent protection may be provided with|
|external fusing or via Current Limiting, Class 2|
|Dominant|Color|Power Supply.|
|Wavelength (nm)|Coordinates|[(1)]|Lumen|Supply wiring leads < 24 AWG shall not be spliced.|
|Color|or Color|Output|For additional product support, go|
|(Typical at|
|Temperature|x|y|25 °C)|to www.bannerengineering.com.|
|(CCT)|
|Supply|Required|Supply|Required|
|Red|622|0.694|0.304|27.4|Wiring|Overcurrent|Wiring|Overcurrent|
|(AWG)|Protection (A)|(AWG)|Protection (A)|
|Green|527|0.177|0.707|69|
|20|5.0|26|1.0|
|Yellow|575|0.456|0.489|46.6|
|22|3.0|28|0.8|
|Blue|472|0.128|0.08|17.4|
|24|2.0|30|0.5|
|Magenta|–|0.371|0.176|24|
|Cyan|493|0.161|0.347|49.5|Construction|
|White|5600 K|0.31|0.335|40.9|Bases, segments, covers: polycarbonate|
|Amber|589|0.542|0.422|39.9|Leakage Current Immunity|
|550 µA|
|Rose|–|0.497|0.226|26.6|Operating Conditions|
|Lime|561|0.369|0.556|53.8|–40 °C to +50 °C (–40 °F to +122 °F)|
|Green|95% at +50 °C maximum relative humidity (non-|
|Orange|600|0.606|0.372|35.5|condensing)|
|Environmental Rating|
|Sky|486|0.146|0.251|41.7|IP65|
|Blue|
|Vibration and Mechanical Shock|
|Violet|–|0.222|0.117|21.3|
|Vibration: 10 Hz to 55 Hz, 0.5 mm peak-to-peak|
|Spring|508|0.166|0.531|62.4|amplitude per IEC 60068-2-6|
|Green|Shock: 15G 11 ms duration, half sine wave per IEC|
|60068-2-27|

**----- End of picture text -----**<br>


(1) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 2 

19-Aug-25