SFSD4096L1BM1TO-I-ME-2A1-STD
Flash Memory Card, SLC, SDHC Card, UHS-1, Class 10, 4 GB, S-450 Series
- Manufacturer: SWISSBIT
- Product type: Flash Memory Cards
- Product Range: S-450 Series
- Memory Capacity: 4GB
- Blank Media Flash Memory Type: SDHC Card, UHS-1, Class 10
| Delivery and price | |
|---|---|
| Units per pack | 50 |
| Price | 69.52 € |
| Current stock | 10+ |
| Lead time | 30 days |
Industrial SD/SDHC Memory Card **S-450 Series UHS-I Interface, SLC**
## **S-450 Series (UHS-I, SLC) Industrial SD/SDHC Memory Card - 512MByte to 32GByte**
## **Main Feature**
- Fully compliant with SD Memory Card specification 3.0
- SD ultra high speed mode, speed class 1 (SDR104)
- SD high speed mode, up to speed class 10
- SD2.0 SDHC backward compliant, default speed and high speed mode
- FAT32 up to 32GB SDHC
- High performance 3.0 specification
- SD burst up to 104MB/s
- SD Normal speed 0…25MHz clock rate
- SD High speed 25…50MHz clock rate
- SD UHS-I speed 0...50MHz (DDR) and 0…208MHz (SDR)
- Up to 90MByte/sec sequential data rate
- Power Supply: (Low-power CMOS technology)
- 2.7…3.6V operating voltage
- Standard SD Memory card form factor
- 32.0mm x 24.0mm x 2.1mm and Write Protect slider
- Optimized FW algorithms especially for high read access and long data retention applications `o` Patented power-off reliability technology
- Wear Leveling technology
- Equal wear leveling of static and dynamic data. The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed
- Write Endurance technology
- Due to intelligent wear leveling an even use of the entire flash is guaranteed, regardless how much “static” (OS) data is stored.
- Read Disturb Management
The read commands are monitored and the content is refreshed when critical levels have occurred
- Data Care Management
- The interruptible background process maintain the user data for Read Disturb effects or Retention degradation due to high temperature effects
- Near Miss ECC technology
- Minimize the risk of uncorrectable bit failure over the product life time. Each read command analyzes the ECC margin level and refresh data if necessary
- Diagnostic features with Life Time Monitoring tool support
- High reliability
- SLC Flash
- Designed for industrial market especially read intensive application like navigation, infotainment, POS/POI, medical and general boot medium use case
- The product is optimized for long life cycle that requires good data retention because of high temperature mission profile.
- For less write and performance critical applications S-4x the more cost efficient S-4x series MLC cards could be used
- Number of card insertions/removals 20,000
- Extended and Industrial Temperature range -25° up to 85°C and -40° up to 85°C
- SIP (System In Package) process for extreme dust, water and ESD proof
- Selected AEC-Q100 qualification
- Controlled BOM & PCN process
- Manufactured in a TS 16949 certified factory
- Customized options like CID registers, CPRM keys, firmware incl. settings and marking by projects
Swissbit reserves the right to change products or specifications without notice.
Swissbit AG Industriestrasse 4 CH-9552 Bronschhofen Switzerland
Revision: 1.01
www.swissbit.com industrial@swissbit.com
S-450_fact_sheet_SD-LxBM_Rev101
Page 2 of 3
## - - Order Information for S 450 Series UHS I SD Memory Cards
|Density|Part Number|Temp. Range|Flash Technology|
|---|---|---|---|
|512MB|`SFSD0512LgBM1TO-t-ME-2xx-STD`|t = E -25°C to 85°C<br>t = I -40°C to 85°C|SLC NAND Flash|
|1GB|`SFSD1024LgBM1TO-t-DF-2xx-STD`|||
|2GB|`SFSD2048LgBM1TO-t-QG-2xx-STD`|||
|4GB|`SFSD4096LgBM1TO-t-ME-2xx-STD`|||
|8GB|`SFSD8192LgBM1TO-t-DF-2xx-STD`|||
|16GB|`SFSD016GLgBM1TO-t-QG-2xx-STD`|||
|32GB|`SFSD032GLgBM1TO-t-NG-2xx-STD`|||
g = generation; x = options, firmware and custom configuration
## System Performance
|System Performance||||
|---|---|---|---|
|System Performance|typ|max|Unit|
|Burst Data transfer Rate (max clock 208MHz SDR)||104|MB/s|
|Sustained Sequential Read 512MB / 1GB…2GB / 4GB…32GB|28 / 28 / 88|30 / 34 / 90||
|Sustained Sequential Write 512MB / 1GB…2GB / 4GB / 8GB…32GB|18 / 20 / 37 / 73|20 / 24 / 40 / 75||
|||||
|Current Consumption@3.3V|typ|max|Unit|
|Write|60|120|mA|
|Read|70|120||
|Autoread|120|130||
|Idle|1.2|5||
## Physical Dimensions
|Physical Dimensions|||||
|---|---|---|---|---|
|Physical Dimensions||Value||Unit|
|Length||32.00±0.10||mm|
|Width||24.00±0.10|||
|Thickness||2.10±0.15|||
|Weight (typ.)||2||g|
|Recommended Temperature Conditions|||||
|Parameter|min|typ|max|Unit|
|Extended Operating Temperature|-25|25|85*)|°C|
|Industrial Operating Temperature|-40|25|85*)|°C|
|StorageTemperature|-40|25|100*)|°C|
*) high temperature storage without operation reduces the data retention, in operation the data will be refreshed, if data error issues were detected
## Humidity and EMC
|error issues were detected<br>Humidity and EMC|||
|---|---|---|
|Parameter|Operating|Non Operating|
|Humidity (non-condensing)|max|95%|
|ESD|Non Contact Pads area:<br>±15 kV (air discharge),<br>according to IEC61000-4-2|Contact Pads:<br>±6 kV, according to IEC61000-4-2<br>Non Contact Pads area:<br>±8kV (indirect) contact discharge,<br>according to IEC61000-4-2|
## Durability
|Durability|||
|---|---|---|
|Parameter|Operating|Non Operating|
|Salt water spray|3% NaCI/35°C; 24h acc. MIL STD Method 1009||
|Insertions / Drop test|>20,000 / 1.5m free fall||
|Bending / Torque / Bump|10N / 0.15Nm or ±2.5deg||
|Shock / Vibration (peak-to-peak)|1500G max / 50G max||
|Data Retention initial @ 40°C|10 years||
For more information on SD Memory card Specification, please visit SD association (www.sdcard.org)
## Why Swissbit?
Swissbit strives to create innovative technologies for future market opportunities utilizing a highly skilled inhouse product research and development team. Swissbit maintains a marketing edge by continuing to manufacture world-class high quality memory products and providing customers with both high value and low cost of ownership achieved through efficient processes and procedures.
Swissbit AG Industriestrasse 4 CH-9552 Bronschhofen Switzerland
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.01
www.swissbit.com
S-450_fact_sheet_SD-LxBM_Rev101
Page 3 of 3
industrial@swissbit.com
Updated at February 9, 2023
Swissbit is a premier independent European manufacturer specializing in industrial-grade storage and embedded IoT solutions. Founded in 2001, the company is globally recognized for engineering highly reliable products designed to meet the rigorous demands of the industrial, automotive, telecommunications, and medical sectors. With manufacturing operations rooted in Germany, Swissbit delivers exceptional quality, long-term component availability, and custom optimization for mission-critical applications. The core of the company's offering centers on advanced semiconductor memory solutions, with a strong emphasis on high-performance flash memory cards. These robust storage options, which include industrial SD cards, microSD memory cards, and CompactFlash, are specifically engineered to provide secure, reliable data retention in extreme operating environments. Swissbit's flash memory products integrate sophisticated wear-leveling and error-correction technologies to guarantee maximum endurance and data integrity over extended product lifecycles. Beyond portable flash memory cards, Swissbit's comprehensive storage ecosystem encompasses managed NAND BGAs, USB flash drives, and a wide array of solid-state drives across multiple interfaces. By combining cutting-edge packaging expertise with hardware-based security features, Swissbit empowers design engineers to reliably store and protect sensitive data across the entire spectrum of modern connected devices.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →