SEMIX501D17FS

**SEMiX501D17Fs** ~~hae~~ 

||**Absolute Maximum Ratings**|
|---|---|
||**Symbol**<br>**Conditions**<br>**Values**<br>**Unit**|
||**Rect. Diode**|
||ID<br>Tj= 150 °C<br>Tc= 85 °C<br>494<br>A|
|**SEMiX® 13**<br>**SEMiX501D17Fs**<br>~~=» ~~|sinus 180°<br>Tc= 100 °C<br>417<br>A<br>IFSM<br>10 ms<br>Tj= 25 °C<br>2740<br>A<br>Tj= 150 °C<br>2140<br>A<br>i2t<br>10 ms<br>Tj= 25 °C<br>37538<br>A²s<br>Tj= 150 °C<br>22898<br>A²s<br>VRSM<br>1700<br>V<br>VRRM<br>1700<br>V<br>Tj<br>-40 ... 150<br>°C<br>**Module**<br>Tstg<br>-40 ... 125<br>°C<br>Visol<br>AC sinus 50Hz<br>1 min<br>4000<br>V<br>1 s<br>4800<br>V<br> ~~ee~~<br>~~en~~<br>~~|~~<br>~~—~~<br>~~fp~~<br>~~eeSS~~<br>~~ee~~|
|||
|**Features**<br> Terminal height 17 mm<br> Chips soldered directly to isolated<br>substrate<br> UL recognised file no. E63532<br>**Typical Applications***<br> Fast Input Bridge Rectifier for AC/DC<br>motor control<br> Power supply<br> High frequency applications|**Characteristics**<br>**Symbol**<br>**Conditions**<br>**min.**<br>**typ.**<br>**max.**<br>**Unit**<br>**Rectifier Diode**<br>VF<br>Tj= 25 °C, IF= 300 A, chiplevel<br>1.90<br>V<br>V(TO)<br>Tj= 125 °C, chiplevel<br>1.10<br>V<br>rT<br>Tj= 125 °C, chiplevel<br>2.7<br>mΩ<br>IRD<br>Tj= 125 °C, VRD= VRRM<br>14.4<br>mA<br>Rth(j-c)<br>sin. 180<br>per diode<br>0.165<br>K/W<br>K/W<br>**Module**<br>RCC'+EE'<br>measured per<br>switch<br>TC= 25 °C<br>0.7<br>mΩ<br>TC= 125 °C<br>1<br>mΩ<br>Rth(c-s)<br>per chip<br>K/W<br>per module<br>0.04<br>K/W<br>Ms<br>to heat sink (M5)<br>3<br>5<br>Nm<br>Mt<br>to terminals (M6)<br>2.5<br>5<br>Nm<br>a<br>5 * 9,81<br>m/s²<br>w<br>350<br>g<br>**Temperature Sensor**<br>R100<br>Tc=100°C (R25=5 kΩ)<br>493 ± 5%<br>Ω<br>B100/125<br>R(T)=R100exp[B100/125(1/T-1/T100)]; T[K];<br>3550<br>±2%<br>K<br>~~| |~~<br>~~em~~<br>~~ee~~<br>~~pot~~<br>~~Pp yf~~<br>~~a~~<br>~~ne~~<br>~~PfoF fe~~<br>~~| |~~<br>~~—~~<br>~~SY~~<br>~~apffo~~<br>~~|~~<br>~~|~~<br>~~ee eee~~<br>~~pp~~<br>~~Sf~~|



## **SEMiX501D17Fs** 

## **Features** 

- Terminal height 17 mm 

- Chips soldered directly to isolated substrate 

- UL recognised file no. E63532 

## **Typical Applications*** 

- Fast Input Bridge Rectifier for AC/DC motor control 

- Power supply 

- High frequency applications 

**D** 

~~Dn~~ **© by SEMIKRON Rev. 4.0 – 25.04.2016 1** 

**SEMiX501D17Fs** 

Fig. 4L: Power dissipation per module vs. direct current 

Fig. 6: Transient thermal impedance vs. time 

**==> picture [209 x 22] intentionally omitted <==**

**----- Start of picture text -----**<br>
Fig. 4R: Power dissipation per module vs. case<br>temperature<br>**----- End of picture text -----**<br>


Fig. 7: On-state characteristics 

Fig. 8: Surge overload current vs. time 

**© by SEMIKRON** 

**Rev. 4.0 – 25.04.2016** 

**2** 

## **SEMiX501D17Fs** 

**==> picture [89 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
spring configuration<br>**----- End of picture text -----**<br>


**==> picture [42 x 7] intentionally omitted <==**

**----- Start of picture text -----**<br>
SEMiX 13<br>**----- End of picture text -----**<br>


This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, chapter IX. 

## ***IMPORTANT INFORMATION AND WARNINGS** 

The specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes. 

**© by SEMIKRON** 

**Rev. 4.0 – 25.04.2016** 

**3**