SEM1630

SEM1630 UNIVERSAL DIN RAIL TRIP AMPLIFIER 

- **ISOLATED Pt100, THERMOCOUPLE, mV, mA INPUT** 

**DUAL RELAY OUTPUTS 250 VAC 1 A** 

**ISOLATED RELAYS** 

- **PC CONFIGURATION USING USB PORT** 

   - **LIVE DATA CAN BE VIEWED ON AN ANDROID** 

   - ~~a~~ **PHONE OR TABLET** 

## **INTRODUCTION** 

The SEM1630 is a DIN rail mounted trip amplifier. It has been designed to accept most common process and temperature sensor inputs and provide the user with a dual relay output. Isolation is provided on all three ports. All temperature ranges are linear to temperature. Designed for ease of use, our latest USB interface is fitted for quick and easy configuration. Just connect a standard USB cable between the SEM1630 and your PC. Using our free configuration software, your PC will automatically upload the existing configuration data and guide you through any changes you wish to make. 

## **FEATURE HIGHLIGHTS** 

**TEMPERATURE SENSOR BURN-OUT DETECTION** If a temperature sensor wire is broken or becomes disconnected, the SEM1630 relays will automatically trip and the LED illuminate. 

**STABILITY** The SEM1630 DIN rail trip amplifier incorporates the latest digital technology to ensure accurate, low-drift performance. 

**FRONT PANEL LED INDICATION** The state LED indicates out of range input during normal operation. LEDs are provided for each relay and will illuminate in alarm condition. “On” if the relay is in an alarm condition. 

**USB CONFIGURATION** The SEM1630 is quick and easy to set up using a standard type USB lead and the free-of-charge configuration software. 

**USB PC CONFIGURATION** The SEM1630 is quick and easy to configure using a standard-type USB lead and the free-of-charge USBSpeedLink Windows software. 

**USB ANDROID VIEW** The SEM1630 can be connected to an android phone or tablet using an OTG USB adaptor. Running a free App, the Android device can then be used to view live data from the SEM1630 

**INPUT                                                                                                                           SPECIFICATIONS @20°C Pt100** 

D2446-01-11 CN5710 SEM1630 Data Sheet, Page 1 of 4 

SEM1630 UNIVERSAL DIN RAIL TRIP AMPLIFIER 

|**Type/Function**|**Range/Description**|**Accuracy/Stability**|
|---|---|---|
|Pt100 3 wire|<br>(-200 to 850)°C|±0.2°C ±0.05% of reading*1|
|Thermal drift|Zero at 20°C|±0.01% of full-scale range/°C|
|Minimum span||25°C*2|
|Linearisation||BS EN 60751(IEC 751)|
|Excitation current||Less than 450 uA|
|Lead resistance effect||0.015°C/Ω|
|Maximum lead resistance||20 Ohms per leg|
|*1 Basic measurement accuracy includes the effects of calibration, linearisation and repeatability|||
|*2 Any span may be selected; full accuracy is only guaranteed for spans greater than the minimum<br>recommended|||



|**INPUT**<br>**THERMOCOUPLE**|**INPUT**<br>**THERMOCOUPLE**|**INPUT**<br>**THERMOCOUPLE**|**SPECIFICATIONS@20°C**|
|---|---|---|---|
|**Type**|**Range**|**Stability**|**Accuracy/Notes**|
|K|(-200 to 1370)°C|Zero at 20 °C<br>±0.01% of FSR/°C|±0.1% of FSR ±0.5 °C|
|J|(-100 to 1200)°C|||
|E|(-100 to 1000)°C|||
|N|(-180 to 1300)°C|||
|T|(-100 to 400)°C||±0.2% FSR ±0.5°C|
|R|(-10 to 1760)°C||±0.1% of FSR ±0.5°C*1|
|S|(-10 to 1760)°C||±0.1% of FSR ±0.5°C*1|
|Cold Junction<br>error|(-20 to 70) °C|Zero at 20°C<br>±0.05°C/°C|±0.5 °C|
|Impedance|||1 MΩ *2|
|||||
|*1 Only over the range (800 to 1600)°C||||
|*2 Not including 0.2 uA open circuit detect bias current effect||||



|**INPUTSPECIFICATIONS @20°C**<br>**mA and mV**|**INPUTSPECIFICATIONS @20°C**<br>**mA and mV**|**INPUTSPECIFICATIONS @20°C**<br>**mA and mV**|
|---|---|---|
|**Type/Function**|**Range/Description**|**Accuracy/Stability**|
|mV|(-20 to 75) mV|± 0.04 mV|
|mV Thermal drift|Zero at 20°C|± 0.01 % of FSR/°C|
|mV Impedance||1 MΩ *1|
|mA<br>Active current|(-10 to 25) mA, (4 to 20) mA capability<br>Externally powered current|± 0.008 mA|
|mA Thermal drift||± 0.01% of FSR /°C|
|mA Impedance|Maximum current over load ± 100 mA|2.7Ω|
|FSR=Full Scale Range|||
|*1 Not including 0.2 uA open circuit detect bias current effect|||



|**OUTPUT**<br>**@20°C**<br>**Dual relays**||**SPECIFICATIONS**|
|---|---|---|
||||
||||
|**Type/Function**|**Range/Description**|**Accuracy/Stability/Notes**|
|Independent relays|Relay 1, relay 2|Form C contacts|
|Contact rating|(250 V ac rms @ 1A ; 30 V dc<br>@ 1 A)|Resistive Load|



D2446-01-11 CN5710 SEM1630 Data Sheet, Page 2 of 4 

SEM1630 UNIVERSAL DIN RAIL TRIP AMPLIFIER 

|**USB USER INTERFACE**||||
|---|---|---|---|
|**Type/Function**|**Range/Description**|**Notes**||
|Configuration hardware|USB Lead|A to mini B||
|Configuration software|USBSpeedLink|Download|www.status.co.uk|
|<br>Sensor configuration|<br>Input type, from list<br>Temperature unit|RTD, T/C,<br>°C or°F|mA, mV|
|Relay configuration<br>Relay (1,2) independently set|Alarm action<br>Setpoint<br>Dead band|High, low<br>°C/°F, mA, mV<br>°C/°F, mA, mV||
|Read live data|Temperature/process<br>Output|°C/°F, mA, mV<br>Relay (1,2) condition||
|Save/Open configuration||From file||
|Default configuration|Pt100, Relay (1,2) Action high, setpoint 100°C, dead band 0.1°C|||
|||||
|**ANDROID USER INTERFACE**||||
|||||
|**Type/Function**|**Range/Description**|**Accuracy/Stability/Notes**||
|Hardware|USB Lead|OTG plus A to Mini B||
|Software|USBVeiwLink|Download from Google play store||
|Read live data|Input signal<br>Output value|°C, °F, mA, mV<br>Relay state||



|**GENERAL**|||
|---|---|---|
|**Function**|**Description**||
|Galvanic Isolation|3750 VAC input to relays; relay to relay||
|Supply voltage|24 VDC ±5%, SELV||
|Supply current|40 mA maximum||
|Response time|< 500 ms to reach 95 % of final value||
|Start-up time|Start-up time < 3 s||
|Protection|Reverse connection and over-voltage protection.<br>Max over-voltage current 100 mA||
|Loss of input signal|Pt100 and thermocouple<br>mV (open circuit)<br>mA (open circuit)|Relays will trip<br>Relays will trip<br>No detection|
|LED (State)|Off = OK<br>On (Red)=Input/output error plus trim function: refer to manual.||
|Relay LED (1,2)|Off = Not in alarm/trip condition<br>On (Red)=In alarm/trip condition||



|**ENVIRONMENTAL**||
|---|---|
|**Function**|**Description**|
|Ambient temperature|Operating/Storage (-20 to 70)°C|
|Ambient Humidity|Operating/Storage (10 to 95) %RH non-condensing|
|Protection requirement|>=IP65 recommended|
|USBconfigurationambient|(10 to 30)°C|



## **MECHANICAL** 

|**MECHANICAL**|**MECHANICAL**|**MECHANICAL**|
|---|---|---|
||**Function**|**Description**|
||Dimensions|17.5 mm width, 56.4 mm depth from rail, 90 mm height|
||Enclosure|DIN rail mount|
||Material|Polymide 6.6 self-extinguishing: Grey|
||Connections|Screw terminals 2.5 mm wire maximum|
||Weight|60 g approximate|



D2446-01-11 CN5710 SEM1630 Data Sheet, Page 3 of 4 

SEM1630 UNIVERSAL DIN RAIL TRIP AMPLIFIER 

|**APPROVALS**|**APPROVALS**|
|---|---|
|EMC|BS EN 61326: Note: Sensor input wires to be less than 30 m to comply|
|Ingress protection|BS EN 60529|
|RoHS|Directive 2011/65/EU|
|LVD|BS EN 61010|



## MECHANICAL 

## ORDER CODE 

## **SEM1630** 

## **ACCESSORIES** 

Configuration software USBSpeedLink (free of charge from www.status.co.uk ) Android live data view USBViewLink (free of charge from Google play store) USB Leads Contact sales@status.co.uk Temperature probe options Please refer to www.status.co.uk 

To maintain full accuracy annual calibration is required contact support@status.co.uk for details. The data in this document is subject to change. Status Instruments assumes no responsibility for errors. 

Status Instruments Ltd Status Business Park Gannaway Lane, Tewkesbury Gloucestershire, UK GL20 8FD 

Tel: +44 (0)1684 296818 Fax: +44 (0)1684 293746 Email: sales@status.co.uk Website: www.status.co.uk 

D2446-01-11 CN5710 SEM1630 Data Sheet, Page 4 of 4