Image not available
Illustrative purposes only
SDR250AS24-CDE
AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 250 W, 24 V, 10.42 A
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: XP POWER
- Product type: AC / DC Enclosed Power Supplies
- Available until stocks are exhausted
- SVHC: No SVHC (15-Jan-2018)
- Product Range: SDR250 Series
- No. of Outputs: 1Outputs
- Output Power Max: 250W
- Input Voltage VAC: 90V AC to 264V AC
- Power Supply Output Type: Fixed
- Output Current - Output 1: 10.42A
- Output Current - Output 2: -
- Output Current - Output 3: -
- Output Current - Output 4: -
- Output Voltage - Output 1: 24V
- Output Voltage - Output 2: -
- Output Voltage - Output 3: -
- Output Voltage - Output 4: -
- Power Supply Applications: ITE
| Delivery and price | |
|---|---|
| Units per pack | 1 |
| Price | 261.01 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
**250 Watts** xppower.com ## **SDR Series** - 3.2”x 5”Footprint - Fits 1U Applications - Low Leakage Current - Up to 600 W Peak Power - Single & Dual Outputs - Top Fan & Convection-cooled Versions - 3 Year Warranty ## **Spe** ~~**cification**~~ ## **Input** - Input Voltage • 90-132 VAC/180-264 VAC, auto ranging - Input Frequency • 47-63 Hz Input Current • 6 A at 115 VAC, 3 A at 230 VAC Inrush Current • Max 70 A at 230 VAC, 35 A at 115 VAC, cold start at 25 °C - Power Factor • EN61000-3-2, class A Earth Leakage Current • <500 μ A at 264 VAC/50 Hz Input Protection • Internal T8A/250 V fuse in line ## **Output** - Output Voltage • See tables Output Voltage Trim • ±5% on V1 (V2 of dual output models will track by same % of adjustment) - Initial Set Accuracy • ±1% Minimum Load • 1% on single output models, 10% on both outputs for dual models - Start Up Delay • 1.5 s max at 120 VAC Start Up Rise Time • 50 ms typical Hold Up Time • 20 ms min at 80% of full load Line Regulation • ±0.5% Load Regulation • ±1% 1-100% load for single outputs ±3% V1, ±7% V2 for dual outputs (except 0312 & 0512 models, ±10% regulation on V2) - Over/Undershoot • 5% max Transient Response • 5% max deviation, recovery to within 1% in 500 μ s for a 50% load change - Ripple & Noise • 1% pk-pk (see note 3) Overvoltage Protection • <130% Vnom on output V1, recycle input to reset - Overtemperature • Measured internally with auto recovery Protection Overload Protection • 110-140% Short Circuit Protection • Trip & restart (hiccup mode), auto recovery - Remote On/Off • Requires a low signal to inhibit output (hiccup mode) - Fan Supply • 12 VDC, 300 mA, not available on ‘-F’ version with built-in fan ## **General** Efficiency • Single output models: 3.3 V & 5 V models 70%, 12 V models 80%, all other models >83% at 230 V & full load. Dual output models: >70% at 230 V & full load Isolation • 3000 VAC Input to Output 1500 VAC Input to Ground 100 VDC Output to Ground Switching Frequency • 29 kHz typical Power Density • 10.4 W/in[3] Signals • Power Good TTL HIGH within 100-500 ms and LOW ≤ 1 ms before loss of regulation MTBF • 150 kHrs typical to MIL-HDBK-217F at 25 °C, GB **Environmental** Operating Temperature • 0 °C to +70 °C, derate at 2.5%/ °C from +50 °C to +70 °C for single output & forced air cooled dual output models. For convection cooled dual output models, (see note 7) ## **Environmental** - Storage Temperature • -20 °C to +85 °C Operating Humidity • 5-90%, non-condensing Storage Humidity • 5-90%, non-condensing Cooling • ‘-F’ version has built-in fan, others require 16 CFM to meet forced air ratings - Operating Altitude • 3000 m Vibration • 5-50 Hz, acceleration 7.35 m/s[2] on X, Y and Z axis ## **EMC & Safety** - Emissions • EN55032 level B conducted & radiated Harmonic Currents • EN61000-3-2, class A Voltage Flicker • EN61000-3-3 ESD Immunity • EN61000-4-2, level 3 Perf Criteria A Radiated Immunity • EN61000-4-3, 3 V/m Perf Criteria A EFT/Burst • EN61000-4-4, level 2 Perf Criteria A Surge • EN61000-4-5, installation class 3, Perf Criteria A - Conducted Immunity • EN61000-4-6, 3V Perf Criteria A Dips & Interruptions • EN61000-4-11 30% 10 ms, 60% 100 ms, 100% 5000 ms, Perf Criteria A, B, B - Safety Approvals • UL62368-1, CSA62368-1 via cUL, EN62368-1, CE (Meets all applicable directives), UKCA (Meets all applicable legislation) **SDR250** ## ~~**Models and Ratings**~~ |Output Voltage|Output Voltage<br>Output Power|Output Current|Output Current|Ripple & Noise<br>Pk-Pk(2)|Model Number(3,4)| |---|---|---|---|---|---| |||Nominal|Peak(1)||| |5 V<br>~~sO~~|200 W<br>~~sO~~|40.00 A<br>~~sO~~|120.00 A<br>~~sO~~|50 mV<br>~~sO~~|SDR250AS05-F(5)<br>~~sO~~| |9 V<br>~~Qe~~|225 W<br>~~Qe~~|25.00 A<br>~~CO~~|66.67 A<br>~~CO~~|90 mV<br>~~CO~~|SDR250AS09-F(5)| |12 V<br>~~Ge~~|250 W<br>~~Ge~~|20.83 A<br>~~GG~~|50.00 A<br>~~GG~~|120 mV<br>~~GG~~|SDR250AS12-F| |15 V<br>~~Ge~~<br>~~eG~~|250 W<br>~~Ge~~<br>~~eG~~|16.70 A<br>~~GG~~<br>~~GQ~~|40.00 A<br>~~GG~~<br>~~GQ~~|150 mV<br>~~GG~~<br>~~GQ~~|SDR250AS15-F| |18 V<br>~~eG~~<br>~~QO~~|250 W<br>~~eG~~<br>~~QO~~|13.89 A<br>~~GQ~~<br>~~QO~~|33.30 A<br>~~GQ~~<br>~~QO~~|180 mV<br>~~GQ~~<br>~~QO~~|SDR250AS18-F(5)<br>~~QO~~| |24 V<br>~~QO~~<br>~~eG~~<br>~~DR~~|250 W<br>~~QO~~<br>~~eG~~<br>~~GO~~|10.42 A<br>~~QO~~<br>~~GO~~<br>~~GO~~|25.00 A<br>~~QO~~<br>~~GO~~<br>~~GO~~|240 mV<br>~~QO~~<br>~~GO~~<br>~~GO~~|SDR250AS24-F<br>~~QO~~<br>~~GO~~| |28 V<br>~~eG~~<br>~~DR~~|250 W<br>~~eG~~<br>~~GO~~|8.93 A<br>~~GO~~<br>~~GO~~|21.43 A<br>~~GO~~<br>~~GO~~|280 mV<br>~~GO~~<br>~~GO~~|SDR250AS28-F(5)<br>~~GO~~| |36 V<br>~~DR ~~<br>~~GO~~|250 W<br> ~~GO~~<br>~~GO~~|6.94 A<br>~~GO~~<br>~~GO~~|16.67 A<br>~~GO~~<br>~~GO~~|360 mV<br>~~GO~~<br>~~GO~~|SDR250AS36-F<br>~~GO~~<br>~~GO~~| |48 V<br>~~GO~~|250 W<br>~~GO~~|5.21 A<br>~~GO~~|12.50 A<br>~~GO~~|480 mV<br>~~GO~~|SDR250AS48-F(5)<br>~~GO~~| |54 V<br>~~OO~~<br>~~DR~~|250 W<br>~~OO~~<br>~~GO~~|4.63 A<br>~~OO~~<br>~~GO~~|11.10 A<br>~~OO~~<br>~~GO~~|540 mV<br>~~OO~~<br>~~GO~~|SDR250AS54-F(5)<br>~~OO~~<br>~~GO~~| |60 V<br>~~DR~~|250 W<br>~~GO~~|4.17 A<br>~~GO~~|10.00 A<br>~~GO~~|600 mV<br>~~GO~~|SDR250AS60-F(5)<br>~~GO~~| |Output Voltage<br>~~DR ~~|Output Voltage<br>Output Power<br> ~~GO~~|Output Current<br>~~GO~~||Ripple & Noise<br>Pk-Pk(2)<br>~~GO~~|Model Number(3,4)<br>~~GO~~| |||Nominal|Peak(1)||| |V1 :<br>+3.3 V<br>~~A~~<br>~~|~~<br>~~—s—sSOY~~|200 W<br>~~A~~<br>~~—s—sSOY~~<br>~~se~~|24.0 A<br>~~ee~~<br>~~es~~|28.8 A<br>~~ee~~<br>~~es~~|50 mV<br>~~ee~~<br>~~es~~|SDR250AD0312-F(5)<br>~~es~~<br>~~**s**~~| |V2 : +12.0 V<br>~~A~~<br>~~|~~<br>~~—s—sSOY~~<br>~~**e**s~~||12.0 A<br>~~ee~~<br>~~es~~<br>~~e~~|14.4 A<br>~~ee~~<br>~~es~~<br>~~e~~~~**s**~~|120 mV<br>~~ee~~<br>~~es~~<br>~~**s**~~|| |V1 :<br>+3.3 V<br>~~A~~<br>~~|~~<br>~~—s—sSOY~~<br>~~**e**s~~<br>~~ee~~|200 W<br>~~A ~~<br>~~—s—sSOY~~<br>~~se~~<br>~~ee~~|24.0 A<br> ~~ee~~<br>~~es~~<br>~~e~~<br>~~R~~|28.8 A<br>~~ee~~<br>~~es~~<br>~~e~~~~**s**~~<br>~~R~~|50 mV<br>~~ee~~<br>~~es~~<br>~~**s**~~|SDR250AD0324-F(5)<br>~~es~~<br>~~**s**~~| |V2 : +24.0 V<br>~~**e**s~~<br>~~ee~~||6.0 A<br>~~e~~<br>~~R~~|7.2 A<br>~~e~~~~**s**~~<br>~~R~~|240 mV<br>~~**s**~~|| |V1 :<br>+5.0 V<br>~~**e**s~~<br>~~ee~~<br>~~PC~~|200 W<br>~~se~~<br>~~ee~~|24.0 A<br>~~e~~<br>~~R~~<br>~~Rs~~|28.8 A<br>~~e~~~~**s**~~<br>~~R~~<br>~~Rs~~|50 mV<br>~~**s**~~<br>~~Rs~~|SDR250AD0512-F(5)<br>~~**s**~~<br>~~Rs~~| |V2 : +12.0 V<br>~~PC~~||12.0 A<br>~~Rs~~|14.4 A<br>~~Rs~~|120 mV<br>~~Rs~~|| |V1 :<br>+5.0 V<br>~~PC~~<br>~~PC~~|200 W<br>~~|~~|24.0 A<br>~~Rs~~<br>~~es~~|28.8 A<br>~~Rs~~<br>~~es~~|50 mV<br>~~Rs~~<br>~~es~~|SDR250AD0524-F(5)<br>~~Rs~~<br>~~es~~<br>~~—_,___L~~| |V2 : +24.0 V<br>~~PC~~<br>~~|~~||6.0 A<br>~~es~~<br>~~|~~|7.2 A<br>~~es~~<br>~~—_,~~|240 mV<br>~~es~~<br>~~—_,~~|| |V1 :<br>+5.0 V<br>~~PC~~<br>~~|~~<br>~~sd~~|200 W<br>~~|~~<br>~~sd~~|24.0 A<br>~~es~~<br>~~|~~<br>~~Rs~~|28.8 A<br>~~es~~<br>~~—_,~~<br>~~Rs~~|50 mV<br>~~es~~<br>~~—_,~~<br>~~Rs~~|SDR250AD0548-F(5)<br>~~es~~<br>~~—_,___L~~<br>~~Rs~~| |V2 : +48.0 V<br>~~|~~<br>~~sd~~||3.0 A<br>~~|~~<br>~~Rs~~|3.6 A<br>~~—_,~~<br>~~Rs~~|480 mV<br>~~—_,~~<br>~~Rs~~|| |V1 : +12.0 V<br>~~|~~<br>~~sd~~<br>~~|~~<br>~~—Y~~|250 W<br>~~|~~<br>~~sd~~<br>~~—Y~~|12.0 A<br>~~|~~<br>~~Rs~~<br>~~Rs~~|14.4 A<br>~~—_,~~<br>~~Rs~~<br>~~Rs~~|120 mV<br>~~—_,~~<br>~~Rs~~<br>~~Rs~~|SDR250AD1224-F<br>~~—_, ___L~~<br>~~Rs~~<br>~~Rs~~| |V2 : +24.0 V<br>~~|~~<br>~~—Y~~||6.0 A<br>~~Rs~~|7.2 A<br>~~Rs~~|240 mV<br>~~Rs~~|| ## ~~**Notes**~~ _1. Peak load can be taken for 500 μ s. Average power not to exceed max power._ _2. Ripple & noise is measured using a 0.1 μ F ceramic capacitor in parallel with 22 μ F electrolytic and 20 MHz bandwidth._ _3. Add suffix ‘D’ for optional output terminal block except the 5 V and 9 V output models which are only available with output terminal blocks._[(6)] _4. Add suffix ‘E’ for optional input terminal block._[(6) ] 5. Available for OEM quantities, contact Sales. ## **Me** ~~**chanical Details**~~ **Enclosed with top fan (option -F)** **==> picture [504 x 293] intentionally omitted <==** **----- Start of picture text -----**<br> A Mounting hole 7 places, M3 x 0.5 mm.<br>0.25 (6.3) 2.00 (50.8) 0.25 (6.3) Max penetration 2.1 mm<br>‘ESURRyeSEION a A A aaa eae ne A |a 0.75 (19.0) | ©<br>ii : na S=_y7 2.25 (57.1)<br>0.55 (13.9) 2.70 (68.5) 1.75 (44.5) 1.66 (42.1)<br>A<br>A<br>LED1<br>Voltage Adj.<br>CN1 RTNRMSWP.G<br>CN3<br><> “2 = NEUTRALFG OFT ( S) WW | a CN2 r y CN2 fl i d<br>LINE A<br>e « ye id A a rN pih-| ——<br>Molex Part No. 09-93-0500 or Dual Output Models<br>ea6 Wwall = Y | —_l equivalent (5 Pin, 3 Used) Lm aeaaaae Single Output Models(5 V & 9 V Models Only Available With Screw Terminals)<br>OPTION ‘E’<br>Terminal Block<br>M3 Screw OPTION ‘D’ [(1)]<br>3 Pins 0.25 (6.35) Center RTN V1<br>Notes [e@o| RTNV1V1 bec} RTNV2<br>1. All dimensions are in inches (mm). Tolerance: ±0.012 (±0.3)<br>i|<br>2. Weight: 0.95 lbs (430 g) 3. Signal connector CN1 mates with JST XHP-3 or equivalent & | Single Output ModelsTerminal Block Dual Output ModelsTerminal Block<br>crimp terminals SXH-002T-P0.6. 5.00 (127.00) M3 Screw 4 Pins M4 Screw 3 Pins<br>4. Input: Molex No. 09-93-0500, crimp terminals Molex series 6838. Max torque for all screw terminals 7.0 lbs-in (0.8 Nm)0.25 (6.3) Center 0.33 (8.3) Center<br>5. Output: Molex No. 09-93-0600 for 12 V to 60 V single output (1) Available for OEM quantities, contact Sales.<br>V1<br>RTN<br>2.55 (64.77) 3.20 (81.28)<br>V1 RTN<br>0.32 (8.26) V2<br>**----- End of picture text -----**<br> 5. Output: Molex No. 09-93-0600 for 12 V to 60 V single output models, 09-93-0800 for dual output models, crimp terminals Molex series 6838. 6. Terminal block for 5 V to 9 V single output models. **SDR250** ## ~~**Mechanical Details**~~ |Output<br>Voltage<br>Forced-cooled<br>Convection-cooled<br>Peak<br>Current(2)<br>Ripple & Noise<br>Pk-Pk(3)<br>Model<br>Number(1,4,5,6)<br>Output Power<br>Output Current<br>Output Power<br>Output Current<br>5 V<br>200 W<br>40.00 A<br>100 W<br>20.00 A<br>120.00 A<br>50 mV<br>SDR250AS05(8)<br>9 V<br>225 W<br>25.00 A<br>121 W<br>13.50 A<br>66.67 A<br>90 mV<br>SDR250AS09(8)<br>12 V<br>250 W<br>20.83 A<br>135 W<br>11.23 A<br>50.00 A<br>120 mV<br>SDR250AS12<br>15 V<br>250 W<br>16.70 A<br>135 W<br>9.00 A<br>40.00 A<br>150 mV<br>SDR250AS15<br>18 V<br>250 W<br>13.89 A<br>135 W<br>7.50 A<br>33.30 A<br>180 mV<br>SDR250AS18(8)<br>24 V<br>250 W<br>10.42 A<br>135 W<br>5.63 A<br>25.00 A<br>240 mV<br>SDR250AS24<br>28 V<br>250 W<br>8.93 A<br>135 W<br>4.82 A<br>21.43 A<br>330 mV<br>SDR250AS28(8)<br>36 V<br>250 W<br>6.94 A<br>135 W<br>3.75 A<br>16.67 A<br>360 mV<br>SDR250AS36<br>48 V<br>250 W<br>5.21 A<br>135 W<br>2.81 A<br>12.30 A<br>480 mV<br>SDR250AS48(8)<br>54 V<br>250 W<br>4.63 A<br>135 W<br>2.50 A<br>11.10 A<br>540 mV<br>SDR250AS54(8)<br>60 V<br>250 W<br>4.17 A<br>135 W<br>2.25 A<br>10.00 A<br>600 mV<br>SDR250AS60(8)<br>~~a~~<br>~~a CG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~GG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~GG~~<br>~~GG~~<br>~~G~~~~**G**~~<br>~~a~~<br>~~GG~~<br>~~C~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~GO~~|Output<br>Voltage<br>Forced-cooled<br>Convection-cooled<br>Peak<br>Current(2)<br>Ripple & Noise<br>Pk-Pk(3)<br>Model<br>Number(1,4,5,6)<br>Output Power<br>Output Current<br>Output Power<br>Output Current<br>5 V<br>200 W<br>40.00 A<br>100 W<br>20.00 A<br>120.00 A<br>50 mV<br>SDR250AS05(8)<br>9 V<br>225 W<br>25.00 A<br>121 W<br>13.50 A<br>66.67 A<br>90 mV<br>SDR250AS09(8)<br>12 V<br>250 W<br>20.83 A<br>135 W<br>11.23 A<br>50.00 A<br>120 mV<br>SDR250AS12<br>15 V<br>250 W<br>16.70 A<br>135 W<br>9.00 A<br>40.00 A<br>150 mV<br>SDR250AS15<br>18 V<br>250 W<br>13.89 A<br>135 W<br>7.50 A<br>33.30 A<br>180 mV<br>SDR250AS18(8)<br>24 V<br>250 W<br>10.42 A<br>135 W<br>5.63 A<br>25.00 A<br>240 mV<br>SDR250AS24<br>28 V<br>250 W<br>8.93 A<br>135 W<br>4.82 A<br>21.43 A<br>330 mV<br>SDR250AS28(8)<br>36 V<br>250 W<br>6.94 A<br>135 W<br>3.75 A<br>16.67 A<br>360 mV<br>SDR250AS36<br>48 V<br>250 W<br>5.21 A<br>135 W<br>2.81 A<br>12.30 A<br>480 mV<br>SDR250AS48(8)<br>54 V<br>250 W<br>4.63 A<br>135 W<br>2.50 A<br>11.10 A<br>540 mV<br>SDR250AS54(8)<br>60 V<br>250 W<br>4.17 A<br>135 W<br>2.25 A<br>10.00 A<br>600 mV<br>SDR250AS60(8)<br>~~a~~<br>~~a CG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~GG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~GG~~<br>~~GG~~<br>~~G~~~~**G**~~<br>~~a~~<br>~~GG~~<br>~~C~~<br>~~GG~~<br>~~CG~~<br>~~GG~~<br>~~GO~~| |---|---| |Output<br>Forced-cooled<br>Convection-cooled<br>Peak<br>Ripple & Noise|Model| |Voltage<br>Current(2)<br>Pk-Pk(3)<br>Output Power<br>Output Current<br>Output Power<br>Output Current|Number(1,4,5,6,7)| |V1 :<br>+3.3 V<br>200 W<br>24.0 A<br>100 W<br>12.0 A<br>28.8 A<br>50 mV<br>SDR250AD0312(8)<br>V2 : +12.0 V<br>12.0 A<br>7.0 A<br>14.4 A<br>120 mV<br>V1 :<br>+3.3 V<br>200 W<br>24.0 A<br>100 W<br>12.0 A<br>28.8 A<br>50 mV<br>SDR250AD0324(8)<br>V2 : +24.0 V<br>6.0A<br>4.0 A<br>7.2 A<br>240 mV<br>V1 :<br>+5.0 V<br>200 W<br>24.0 A<br>100 W<br>12.0 A<br>28.8 A<br>50 mV<br>SDR250AD0512(8)<br>V2 : +12.0 V<br>12.0 A<br>7.0 A<br>14.4 A<br>120 mV<br>V1 :<br>+5.0 V<br>200 W<br>24.0 A<br>100 W<br>12.0 A<br>28.8 A<br>50 mV<br>SDR250AD0524(8)<br>V2 : +24.0 V<br>6.0 A<br>4.0 A<br>7.2 A<br>240 mV<br>V1 :<br>+5.0 V<br>200 W<br>24.0 A<br>100 W<br>12.0 A<br>28.8 A<br>50 mV<br>SDR250AD0548(8)<br>V2 : +48.0 V<br>3.0 A<br>2.0 A<br>3.6 A<br>480 mV<br>V1 : +12.0 V<br>250 W<br>12.0 A<br>135 W<br>7.0 A<br>14.4 A<br>120 mV<br>SDR250AD1224<br>V2 : +24.0 V<br>6.0 A<br>4.0 A<br>7.2 A<br>240 mV<br>~~**Notes**~~<br>~~P~~<br>~~P~~<br>~~ee~~<br>~~P~~<br>~~P~~<br>~~ee~~<br>~~ese~~<br>~~P~~<br>~~fp~~<br>~~a~~<br>~~P|~~<br>~~Pe~~<br>~~es~~<br>~~a~~<br>~~es~~<br>~~ee cee ees MO~~<br>~~P~~<br>~~Pp~~<br>~~a~~<br>~~yes~~<br>~~Pn~~<br>~~Pe~~<br>~~es~~|| _1. Add suffix ‘L’ to model number for optional 500 μ A leakage current._[(8)] _2. Peak load can be taken for 500 μ s. Average power not to exceed max power._ _3. Ripple & noise is measured using a 0.1 μ F ceramic capacitor in parallel with 22 μ F electrolytic and 20 MHz bandwidth._ _6. Add suffix ‘-E’ for optional input terminal block._[(8)] _7. Operating temperature - 0 °C to +60 °C, derate at 5%/ °C from 50 °C to 60 °C for convection cooled dual output models._ _8. Available for OEM quantities, contact Sales._ _4. For optional vented cover add suffix ‘-C’ to model number._ _5. Add suffix ‘-D’ for optional output terminal block except the 5 V and 9 V output models which are only available with output terminal blocks._[(8)] ## ~~**Mechanical Details**~~ **==> picture [491 x 268] intentionally omitted <==** **----- Start of picture text -----**<br> A Mounting hole 7 places, M3 x 0.5 mm.<br>U-Channel 0.25 (6.35) 2.00 (50.80) 0.25 (6.35) Max penetration 2.1 mm<br>A A A 0.75 (19.05)<br>* Wl mT ©<br>a le S a xa<br>0.55 (13.90) 2.70 (68.58) 1.75 (44.52) 1.50 (38.10)<br>> ! l l | S S P ) : PE ry<br>A A<br>LED1 Voltage Adj.<br>FAN<br>CN1 RETURNREMOTE ON/OFFPOWER GOOD<br>CN3<br>NEUTRALFG CN2 CN2<br>LINE A A<br>g<br>LS nananan lt ag | :<br>Molex Part No. 09-93-0500 or Single Output ModelsDual Output Models<br>OPTION ‘E’ equivalent (5 Pin, 3 Used) (5 V & 9 V Models Only Available With Screw Terminals)<br>Terminal Block<br>M3 Screw OPTION ‘D’ [(1)]<br>3 Pins 0.25 (6.35) Center RTN V1<br>eS We y AH 4 RTNV1 RTN<br>1.50 (38.10) V1 V2<br>Single Output Models Dual Output Models<br>Terminal Block Terminal Block<br>5.00 (127.00) 0.25 (6.35) CenterM3 Screw 4 Pins 0.33 (8.35) CenterM4 Screw 3 Pins<br>Max torque for all screw terminals 7.0 lbs-in (0.8 Nm)<br>(1) Available for OEM quantities, contact Sales.<br>Notes<br>1. All dimensions are in inches (mm). Tolerance: ±0.012 (±0.3) 5. Input: Molex No. 09-93-0500, crimp terminals Molex series 6838.<br>RTN V1<br>2.55 (64.77) 3.20 (81.28)<br>0.32 (8.26) V1 RTN<br>V2<br>**----- End of picture text -----**<br> ## ~~**Notes**~~ 1. All dimensions are in inches (mm). Tolerance: ±0.012 (±0.3) 2. Weight: 0.88 lbs (400 g) 6. Output: Molex No. 09-93-0600 for 12 V to 60 V single output models, 09-93-0800 for dual output models, crimp terminals Molex series 6838. 3. Signal connector CN1 mates with JST XHP-3 or equivalent & crimp terminals SXH-002T-P0.6. 7. Terminal block for 5 V to 9 V single output models. 4. Fan connector mates with JST XHP-2 or equivalent & crimp terminals. **SDR250** ## ~~**Mechanical Details**~~ **==> picture [494 x 298] intentionally omitted <==** **----- Start of picture text -----**<br> U-Channel with cover (Option ‘-C’)<br>A Mounting hole 7 places, M3 x 0.5 mm.<br>0.25 (6.35) 2.00 (50.80) 0.25 (6.35)<br>Max penetration 2.1 mm<br>A A A 0.75 (19.05)<br>—— “<br>0.55 (13.90) 2.70 (68.58) 1.75 (44.52) 1.66 (42.10)<br>A A<br>LED1 Voltage Adj.<br>FAN<br>CN1 RETURNREMOTE ON/OFFPOWER GOOD<br>CN3<br>NEUTRALFG Bl | CN2 CN2<br>LINE A B<br>Molex Part No. 09-93-0500 or Dual Output Models<br>OPTION ‘E’ equivalent (5 Pin, 3 Used) Single Output Models<br>Terminal Block<br>M3 Screw OPTION ‘D’ [(1)]<br>3 Pins 0.25 (6.35) Center<br>RTN V1<br>RTN<br>V1 RTN<br>V1 V2<br>Single Output Models Dual Output Models<br>Terminal Block Terminal Block<br>M3 Screw 4 Pins M4 Screw 3 Pins<br>5.00 (127.00) 0.25 (6.35) Center 0.33 (8.35) Center<br>Max torque for all screw terminals 7.0 lbs-in (0.8 Nm)<br>(1) Available for OEM quantities, contact Sales.<br>RTN V1<br>2.55 (64.77) 3.20 (81.28)<br>V1 RTN<br>0.32 (8.26)<br>V2<br>**----- End of picture text -----**<br> ## ~~**Notes**~~ 1. All dimensions are in inches (mm). Tolerance: ±0.012 (±0.3) 2. Weight: 0.93 lbs (420 g) 3. Signal connector CN1 mates with JST XHP-3 or equivalent & crimp terminals SXH-002T-P0.6. 5. Input: Molex No. 09-93-0500, crimp terminals Molex series 6838. 6. Output: Molex No. 09-93-0600 for 12 V to 60 V single output models, - 09-93-0800 for dual output models, crimp terminals Molex series 6838. 7. Terminal block for 5 V to 9 V single output models 4. Fan connector mates with JST XHP-2 or equivalent & crimp terminals. ## ~~**Application Notes**~~ ## **Remote On/Off** **==> picture [85 x 45] intentionally omitted <==** **----- Start of picture text -----**<br> INH<br>CN1<br>PSU<br>RTN<br>**----- End of picture text -----**<br> Note: 1. Applying <0.3 V or short between pins 2 and 1 turns the output OFF. 2. Applying >4.5 V or open circuit between pins 2 and 1 turns output ON. 3. The output will enter hiccup mode. Recommended maximum time is 3 minutes. ## **Power Good** **==> picture [384 x 102] intentionally omitted <==** **----- Start of picture text -----**<br> +5 V<br>1 K<br>POWER GOOD<br>Pin 3<br>PSU DC OK<br>CN1<br>Sink current = 6 mA<br>Source current = 1 mA<br>Pin 1<br>Return POWER NOT GOOD<br>**----- End of picture text -----**<br> 14 Oct 2021
Updated at June 10, 2026
XP Power is a globally recognized leader in the design and manufacture of critical power solutions for the electronics industry. With a steadfast commitment to total quality and in-house engineering expertise, the company delivers highly reliable components that support complex applications across the industrial, healthcare, and technology sectors. Their extensive manufacturing capabilities provide engineers with a broad and dependable source for innovative power products. Our extensive portfolio of XP Power components is heavily focused on robust power and line protection. The core of this offering features a vast selection of high-performance AC/DC converters, designed to meet the rigorous efficiency and footprint demands of modern electronic systems. Complementing these are numerous reliable DC/DC converters, providing versatile options for precise voltage regulation and seamless system integration. Beyond their primary power conversion ranges, XP Power manufactures specialized components to address specific design challenges. Our selection includes essential passive components, such as power line filters for effective EMC and RFI suppression, ensuring signal integrity and strict regulatory compliance. Additionally, we provide dedicated AC/DC LED power supplies tailored for reliable, long-lasting performance in advanced commercial and industrial lighting applications.
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 410,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →