SA1P-UC24V

USB Powered Portable Sensor Checker CONNECT SA1P ~~|~~ 

## Portable 

## Sensor Checker 

Easily connects 24V DC devices at any location 

## - Compact & lightweight (95g). Ideal for on site use 

**==> picture [524 x 195] intentionally omitted <==**

**----- Start of picture text -----**<br>
Push-in terminal eliminates<br>the need for tools<br>BOWER . | A A 5pNP<br>Output 200mA<br>Back<br>| oFF 8on pnBB B BNP an; =WPM<br>gv 51<br>7 . —<br>Connects to 2 types of  == 2<br>devices simultaneuously<br>pEc_)icoav<br>We PU<br>Scale markings enable easy<br>measurement of detection distances<br>NPN/PNP output<br>**----- End of picture text -----**<br>


## Issue 

## How can I test 24VDC devices on my machine? 

The old way of using cell batteries or power supplies connected to outlets using extension cords are required. 

**==> picture [334 x 8] intentionally omitted <==**

**----- Start of picture text -----**<br>
Without AC power supply With AC power supply<br>**----- End of picture text -----**<br>


## Have you ever had this experience? 

When testing operation of sensors and indicator lights on-site, as there are no power outlets nearby, it takes a lot of time and effort to route the cords from the control panel. 

2 

SA1P 

Solution 

**==> picture [461 x 597] intentionally omitted <==**

**----- Start of picture text -----**<br>
USB Powered Portable Sensor Checker SA1P<br>The SA1P uses an external USB battery for power<br>Because cell batteries are not required, cost can be reduced<br>and used for a long period of time. The mobile battery can be<br>fastened using a belt for making it convenient to carry<br>around.<br>Connects to PCs using a USB connector (*2) (*2)<br>*1) Connect to a mobile battery of 5V DC, 2A ouput min.<br>*2)  When connecting a USB connecter from a PC, load conditions differ depending on<br>ratings. See the instruction manual for details.<br>Oo<br>Tests and continuity checks can be performed in any location<br>Easy device testing and continuity check for 24V DC devices<br>without power outlets near by.<br>a eat :<br>-<br>Push in terminal allows easy wiring.  Connect up to 2 devices simultaneously.<br>Operation check of<br>Sensor operation check SA2E Operation check of<br>pressure-sensitive switches<br>SA1E-L such as edge switches  illuminated buzzers<br>af N ‘ * sm ‘a “ ne as= |" ‘<br>alt Fo ate — iTS a<br>tay, “Fy ~ oy “Fy #<br>Ce i<br>E30BK1 (*1) HW1Z<br>*1)  Available<br>August 2021<br>y . &<br>Example: Connecting 3-wire sensors 24V DC  0V NPN or PNP A (S1 terminal)<br>Brown Blue Black<br>1.  Insert each wire by pressing part A (white terminal).<br>2.  Turn on the POWER switch. oe nA<br>3.   When the output signal is received from the sensor, the signal input indicator (red) turns on. To<br>make the buzzer sound at the same time, turn on the BUZZER.<br>(Two terminal parts are available so that two sensors can be connected)<br>**----- End of picture text -----**<br>


**==> picture [340 x 124] intentionally omitted <==**

**----- Start of picture text -----**<br>
The SA1P uses an external USB battery for power<br>Because cell batteries are not required, cost can be reduced<br>and used for a long period of time. The mobile battery can be<br>fastened using a belt for making it convenient to carry<br>around.<br>Connects to PCs using a USB connector (*2) (*2)<br>*1) Connect to a mobile battery of 5V DC, 2A ouput min.<br>*2)  When connecting a USB connecter from a PC, load conditions differ depending on<br>ratings. See the instruction manual for details.<br>7Oo<br>**----- End of picture text -----**<br>


3 

**==> picture [500 x 244] intentionally omitted <==**

**----- Start of picture text -----**<br>
General Specifications Part No.<br>Connectors USB Type-C connector Main part  Package quantity:1<br>(USB2 0 Type-A conversion cable on main unit) *1<br>USB power rating 5V DC, 2A maximum Name Part No. (Ordering No.)<br>Input current No Load: 0.2AMax. load current: 1.8A (buzzer ON), 1.5A (buzzer OFF) SA1P SA1P-UC24V<br>Connectors Terminal S1, S2 (push-in terminal) [-—— +<br>External output (for sensor power) 24V DC±10% 200mA max. (Total of S1 and S2) Attachments (included with Part No.) Package quantity:1<br>Points 2 points Name / Shape Descriptions<br>Connection*2 NPN: Connect to 24V  NPN open collector output.PNP: Connect to 24V  PNP open collector output. Fastening belt<br>Signal input<br>(connected  NPN:  Buzzer output ON: 25mA  Belt to fasten the USB cable or mobile battery.<br>to sensor  (peak current 50mA)/point  Black, length: 0.3m, width: 20mm, thickness: 1mm<br>output Input current Buzzer output OFF: 2mA/point<br>PNP:  Buzzer output ON: 2mA/point  Je<br>Buzzer output OFF: 2mA/point USB cable Cable used to connect the SA1P and<br>Min. input time 0.5s the power supply.<br>Buzzer output 1 point (S1/S2/OFF selectable) Connector (main unit side): USB Type C<br>POWER Switch (ON-OFF) Connector (power supply side): USB Type A<br>Slide switches Buzzer Switch (S1-OFF-S2) Length: 0.25m<br>Strap<br>POWER indicator (Green)<br>Indicator Signal input indicator S1 side (Red)<br>Signal input indicator S2 side (Red) Prevents the SA1P from dropping.<br>Operating temperature -10 to +50°C (no freezing)<br>AZ<br>Relative humidity 30 to 85%RH (no condensation)<br>Storage temperature -25 to +70°C (no freezing)<br>EMC Resistance IEC/EN61000-6-2, IEC/EN61000-6-4<br>Power supply<br>Electrical specifications Sensor connection<br> specificationsEnvironmental<br>**----- End of picture text -----**<br>


- *1)  We recommend you to use the USB cable supplied with the product . If a commercially available USB cable is used, be sure to keep the cable length short in consideration of the voltage drop caused by the current flowing through the USB cable. Note that operation of commercially available USB cables are not guaranteed. 

- *2)  Although a proximity switch, a switch or other devices with contacts can be connected, a DC 2-wire type sensor with built-in power supply cannot be connected. 

**==> picture [238 x 10] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dimensions  Dimensions in mm<br>**----- End of picture text -----**<br>


**==> picture [118 x 59] intentionally omitted <==**

**----- Start of picture text -----**<br>
24 114<br>64 =<br>**----- End of picture text -----**<br>


## Instructions ss 

Be sure to read the instruction sheet before installation, wiring, operation, and maintenance of the product. 

For details on installation, wiring, and maintenance, see the Instruction Sheet and User’s Manual from the URL below. SA1P https://product.idec.com/?product=SA1P ~~Bee~~ 

Product Information ~~Ss~~ Miniature Photoelectric Switches ~~S(O~~ Photoelectric Switches Magnetic Proximity Switches SA2E SA1U DPRI wip & ; Acheives stable detection even at a fast response time of 0.5ms. Universal voltage types operate on 24-240V AC and 12-240V The DPRI magnetic proximity switch incorporates a sealed Equipped with light ON/dark ON features, on-site switching of DC. DC power types operate on 12-24V DC. Four sensing reed switch and four magnets inside a compact housing. This light ON/dark ON is possible, enabling stock reduction . Three methods (through-beam, polarized retrorefl ective, diffuseself-contained proximity switch requires no external power detection distances (1000, 500, 100m) available for diffuserefl ective, and background suppression). supply and can detect the presence of magnetic objects reflective sensors allowing a flexible installation location. without contact. 

**Head Office** IDEC CORPORATION 6-64, Nishi-Miyahara-2-Chome, Yodogawa-ku, Osaka 532-0004, Japan 

## **www.idec.com** 

**USA** IDEC Corporation Tel: +1-408-747-0550 opencontact@idec.com **Hong Kong** IDEC Izumi (H.K.) Co., Ltd. Tel: +852-2803-8989 info@hk.idec.com **Germany** APEM GmbH Tel: +49-40-25 30 54-0 service@eu.idec.com **China** IDEC (Shanghai) Corporation Tel: +86-21-6135-1515 idec@cn.idec.com **Singapore** IDEC Izumi Asia Pte. Ltd. Tel: +65-6746-1155 info@sg.idec.com Beijing Branch Tel: +86-10-6581-6131 idec@cn.idec.com **Thailand** IDEC Asia (Thailand) Co., Ltd Tel: +66-2-392-9765 sales@th.idec.com Guangzhou Branch Tel: +86-20-8362-2394 idec@cn.idec.com **India** IDEC Controls India Private Limited Tel: +91-80679-35328 info_india@idec.com **Japan** IDEC Corporation Tel: +81-6-6398-2527 jp_marketing@idec.com **Taiwan** IDEC Taiwan Corporation Tel: +886-2-2577-6938 service@tw.idec.com 

Specifications and other descriptions in this brochure are subject to change without notice. Information in this brochure is current as of April, 2021. 2021 IDEC Corporation, All Rights Reserved. 

EP1760-0