S1GFL

## S1AFL - S1MFL 

## Surface General-Purpose Rectifier 

## **Features** 

- Ultra Thin Profile − Maximum Height of 1.08 mm 

- UL Flammability 94V−0 Classification 

- MSL 1 

- Green Mold Compound 

- These Devices are Pb−Free, Halogen Free Free and are RoHS Compliant 

## **www.onsemi.com** 

1 2 ~~o—_lbq—~~ Cathode Anode **General−Purpose Rectifier** 

**SOD−123F CASE 425AD** 

- **MARKING DIAGRAM** &Y &Z*&G 

- ~~dL~~ Band Indicates Cathode 

- &Y = Binary Calendar Year Coding Scheme &Z = Assembly Plant Code * = Specific Device Code 1A, 1B, 1D, 1G, 1J, 1M 

- &G = Single Digit Weekly Data Code 

## **ORDERING INFORMATION** 

See detailed ordering and shipping information on page 2 of this data sheet. 

Publication Order Number: **S1MFL/D** 

**1** 

© Semiconductor Components Industries, LLC, 2017 **June, 2018 − Rev. 2** 

## **S1AFL − S1MFL** 

**ABSOLUTE MAXIMUM RATINGS** (TA = 25 ° C unless otherwise noted) 

|**ABSOLUT**|**E MAXIMUM RATINGS**(TA= 25°C unless otherwis|e noted)|e noted)|e noted)|e noted)|e noted)|e noted)||
|---|---|---|---|---|---|---|---|---|
|**Symbol**|**Rating**|**Value**||||||**Unit**|
|||**S1AFL**|**S1BFL**|**S1DFL**|**S1GFL**|**S1JFL**|**S1MFL**||
|VRRM|Recurrent Peak Reverse Voltage|50|100|200|400|600|1000|V|
|VRMS|RMS Voltage|35|70|140|280|420|700|V|
|VDC|DC Blocking Voltage|50|100|200|400|600|1000|V|
|IF(AV)|Average Forward Current (Note 1)|1||||||A|
|IFSM|Peak One Cycle Forward Current (Non−Repetitive)<br>at 60Hz|30||||||A|
|TJ,TSTG|Operating and Storage Temperature Range|−55 to +150||||||°C|



Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Pulse test: 300 � s pulse width, 1 % duty cycle. 

**THERMAL CHARACTERISTICS** (TA = 25 ° C unless otherwise noted) (Note 2) 

|**THERMAL**|**CHARACTERISTICS**(TA= 25°C unless otherwise noted) (Note 2)|||
|---|---|---|---|
|**Symbol**|**Characteristic**|**Value**|**Unit**|
|�JL|Typical Thermal Characteristics, Junction−to−Lead (Note 3)|25|°C/W|
|R�JA|Typical Thermal Resistance, Junction−to−Ambient|140|°C/W|



2. Per JESD51−3 recommended thermal test board. Device mounted on FR−4 PCB, board size = 76.2 mm x 114.3 mm. 3. Thermocouple soldered at cathode lead. 

**ELECTRICAL CHARACTERISTICS** (TA = 25 ° C unless otherwise noted) 

|**ELECTRIC**|**AL CHARACTERISTICS**(TA=|25°C unless otherwise noted)|25°C unless otherwise noted)|||||
|---|---|---|---|---|---|---|---|
|**Symbol**|**Parameter**|**Conditions**||**Min**|**Typ**|**Max**|**Unit**|
|VF|Forward Voltage|IF= 1 A||−|−|1.1|V|
|IR|Reverse Current|VR= VDC|TA= 25°C|−|−|1|�A|
||||TA= 125°C|−|−|50||
|Trr|Reverse Recovery Time|IF= 0.5 A, IR= 1 A, Irr=|0.25 A|−|1.304|2|�s|
|CJ|Junction Capacitance|VR= 4 V, f = 1.0 MHz||−|4|−|pF|



Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 

## **ORDERING INFORMATION** 

|**ORDERING INFORMATION**||||
|---|---|---|---|
|**Part Number**|**Top Mark**|**Package**|**Shipping**†|
|S1AFL|1A|SOD−123F<br>(Pb−Free/Halogen Free)|3000 / Tape & Reel|
|S1BFL|1B|SOD−123F<br>(Pb−Free/Halogen Free)|3000 / Tape & Reel|
|S1DFL|1D|SOD−123F<br>(Pb−Free/Halogen Free)|3000 / Tape & Reel|
|S1GFL|1G|SOD−123F<br>(Pb−Free/Halogen Free)|3000 / Tape & Reel|
|S1JFL|1J|SOD−123F<br>(Pb−Free/Halogen Free)|3000 / Tape & Reel|
|S1MFL|1M|SOD−123F<br>(Pb−Free/Halogen Free)|3000 / Tape & Reel|



†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 

**www.onsemi.com** 

**2** 

**S1AFL − S1MFL** 

## **TYPICAL PERFORMANCE CHARACTERISTICS** 

**==> picture [212 x 371] intentionally omitted <==**

**----- Start of picture text -----**<br>
2<br>1<br>0<br>0 25 50 75 100 125 150 175<br>Lead Temperature ( � C)<br>Figure 1. Forward Current Derating Curve<br>100<br>10<br>TJ = 125 ° C<br>1<br>TJ = 75 ° C<br>0.1<br>0.01 TJ = 25 ° C<br>0.001<br>0 20 40 60 80 100<br>Percent of Peak Reverse Voltage (%)<br>Current (A)<br>, Average Rectified Forward<br>IF<br>A)<br>�<br>Instantaneous Reverse Current (<br>**----- End of picture text -----**<br>


**Figure 3. Typical Reverse Characteristics** 

**==> picture [212 x 164] intentionally omitted <==**

**----- Start of picture text -----**<br>
40<br>35<br>30<br>25<br>20<br>15<br>10<br>5<br>0<br>1 2 5 10 20 50 100<br>No. of Cycle at 60 Hz<br>Peak Forward Surge Current (A)<br>**----- End of picture text -----**<br>


**Figure 5. Maximum Non−Repetitive Surge Current** 

**==> picture [219 x 581] intentionally omitted <==**

**----- Start of picture text -----**<br>
100<br>40<br>20<br>10<br>4.0<br>2.0<br>1.0<br>0.4<br>0.2<br>0.1<br>0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8<br>Instantaneous Forward Voltage (V)<br>Figure 2. Typical Instantaneous Forward<br>Characteristics<br>100<br>TJ = 25 ° C<br>50<br>20<br>10<br>5<br>2<br>1<br>0.1 1.0 10 100 1000<br>Reverse Voltage (V)<br>Figure 4. Typical Junction Capacitance<br>10<br>1 TA = 150 ° C<br>TA = 125 ° C<br>0.1<br>TA = 100 ° C TA = 75 ° C<br>0.01<br>TA = 25 ° C<br>1E−3<br>0.2 0.4 0.6 0.8 1.0 1.2<br>VF, Forward Voltage (V)<br>Instantaneous Forward Current (A)<br>Capacitance (pF)<br>, Forward Current (A)<br>IF<br>**----- End of picture text -----**<br>


**Figure 6. Typical Forward Characteristics** 

**www.onsemi.com** 

**3** 

MECHANICAL CASE OUTLINE **PACKAGE DIMENSIONS** 

DATE 04 AUG 2017 

**==> picture [44 x 35] intentionally omitted <==**

**SOD−123FL** CASE 425AD ISSUE A 

**SCALE 4:1** 

**==> picture [53 x 71] intentionally omitted <==**

**==> picture [53 x 71] intentionally omitted <==**

**==> picture [225 x 108] intentionally omitted <==**

**==> picture [491 x 72] intentionally omitted <==**

**----- Start of picture text -----**<br>
DOCUMENT NUMBER: 98AON13725G Electronic versions are uncontrolled except when<br>accessed directly from the Document Repository. Printed<br>STATUS: ON SEMICONDUCTOR STANDARD<br>versions are uncontrolled except when stamped<br>“CONTROLLED COPY” in red.<br>NEW STANDARD:<br>©   Semiconductor Components Industries, LLC, 2002 http://onsemi.com Case Outline Number:<br>October, 2002 − Rev. 0DESCRIPTION: SOD−123FL 1 PAGE 1 OF 2XXX<br>**----- End of picture text -----**<br>


|~~eT ©~~|~~eT ©~~|**DOCUMENT NUMBER:**<br>**98AON13725G**<br>**PAGE 2 OF 2**<br>~~——~~|**DOCUMENT NUMBER:**<br>**98AON13725G**<br>**PAGE 2 OF 2**<br>~~——~~|
|---|---|---|---|
|**ISSUE**|**REVISION**||**DATE**|
|O|RELEASED FOR PRODUCTION FROM FAIRCHILD MA02B TO ON||31 AUG 2016|
||SEMICONDUCTOR. REQ. BY B. NG.|||
|A|CONVERTED TO ONSEMI FORMAT AND ADDED BACKSIDE FOOT LENGTH.|CONVERTED TO ONSEMI FORMAT AND ADDED BACKSIDE FOOT LENGTH.|04 AUG 2017|
||REQ. BY H. ALLEN.|||



**ON Semiconductor** and          are registered trademarks of Semiconductor Components Industries, LLC (SCILLC).  SCILLC reserves the right to make changes without further notice to any products herein.  SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time.  All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts.  SCILLC does not convey any license under its patent rights nor the rights of others.  SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur.  Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part.  SCILLC is an Equal Opportunity/Affirmative Action Employer.  This literature is subject to all applicable copyright laws and is not for resale in any manner. 

Case Outline Number: 

© Semiconductor Components Industries, LLC, 2017 **August, 2017 − Rev. A** 

**425AD** 

ON Semiconductor and      are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 

## **PUBLICATION ORDERING INFORMATION** 

## **LITERATURE FULFILLMENT** : 

Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA **Phone** : 303−675−2175 or 800−344−3860 Toll Free USA/Canada **Fax** : 303−675−2176 or 800−344−3867 Toll Free USA/Canada **Email** : orderlit@onsemi.com 

**N. American Technical Support** : 800−282−9855 Toll Free **ON Semiconductor Website** : **www.onsemi.com** USA/Canada 

**Order Literature** : http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 

**Europe, Middle East and Africa Technical Support:** Phone: 421 33 790 2910 

◊