S18LGRBPQ

EZ-LIGHT® S18L General Purpose Indicators 

## Features 

DC-Operated LED Indicators with One, Two, or Three Colors 

- Up to three independent colors in one unit 

- • Translucent face appears gray when off to avoid false indication • M12 connector models available for plug and play indication • Wide 180° field of view 

- Wide 10 V DC to 30 V DC operating range allows for use in battery-powered mobile applications 

- • Available with PNP or NPN input, depending on model • IP69K rated to withstand harsh wash-down environments • Wide operating range of –40 °C to +60 °C (–40 °F to +140 °F) • Daylight visible models with a clear cover and more focused light output provide greater visibility in high ambient light conditions 

## Models 

## Standard Models 

**==> picture [497 x 396] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||
|---|---|---|---|---|---|
|Family|Color 1|Color 2|Color 3|Input|Connector|
|S18L|G|R|Y|P|Q|
|G = Green|
|R = Red|
|Y = Yellow|Blank = 2 m (6.5 ft) integral PVC-|
|jacketed cable|
|B = Blue|
|Q = Integral 4-pin M12 male quick-|
|W = White|P = PNP|disconnect connector|
|MODEL KEY|
|O = Orange|N = NPN|QP = 150 mm (6 in) PVC-jacketed|
|cable with a 4-pin M12 male quick-|
|T =Turquoise|disconnect connector|
|V = Violet|T = 4-screw terminals|
|M = Magenta|
|X = No color in this position|
|Daylight Visible Models|
|Family|Color 1|Color 2|Color 3|Input|Connector|
|S18DL|G|R|Y|P|Q|
|G = Green|
|Blank = 2 m (6.5 ft) integral PVC-|
|R = Red|jacketed cable|
|Y = Yellow|Q = Integral 4-pin M12 male quick-|
|P = PNP|disconnect connector|
|MODEL KEY|B = Blue|
|N = NPN|QP = 150 mm (6 in) PVC-jacketed|
|W = White|cable with a 4-pin M12 male quick-|
|disconnect connector|
|O = Orange|
|T = 4 screw terminals|
|X = No color in this position|
|Example Model|Indicators|Input|Connector Type|
|S18LGRYP|Green, Red, Yellow|PNP|Blank = 2 m (6.5 ft) integral PVC-jacketed cable|
|S18LGXXPQ|Green|PNP/NPN|Integral 4-pin M12 male quick-disconnect|
|connector|
|150 mm (6 in) PVC-jacketed cable with a|
|S18LGRXPQP|Green, Red|PNP|4-pin M12 male quick-disconnect|
|connector|
|S18LGRYPT|Green, Red, Yellow|PNP|4 screw terminals|

**----- End of picture text -----**<br>


NOTE: Single color models should be ordered as PNP models, but can be wired for either PNP or NPN input. 

Original Instructions 25-Aug-25 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

p/n: 160690 Rev. I 

EZ-LIGHT® S18L General Purpose Indicators 

## Wiring 

**==> picture [392 x 216] intentionally omitted <==**

**----- Start of picture text -----**<br>
Multi Color Wiring<br>NPN 1 = Brown<br>bn (1) PNP 2 = White C1 = Color 1<br>+ bu (3) _ 3 = Blue4 = Black C2 = Color 2C3 = Color 3<br>bk (4) _ bk (4) 5 = Gray<br>+<br>© Gi) he<br>bu (3) bn (1)<br>wh (2) wh (2) Gray Wire not used in K30 Terminal models<br>Bey<br>Single Color Wiring<br>NPN PNP<br>bk (4) bu (3)<br>10-30 V DC 10-30 V DC<br>bu (3) bk (4)<br>bn (1) not used bn (1) not used<br>wh (2) not used wh (2) not used<br>eEm<br>**----- End of picture text -----**<br>


## Specifications 

## Supply Voltage and Current 

10 V DC to 30 V DC at 25 mA max. per LED color 

## Indicators 

LEDs are independently selected; 1, 2, or 3 colors, depending on model. For other colors/ combinations, contact Factory for availability Standard Models: Entire translucent dome provides even indication viewable from over 180 degrees 

Daylight Visible Models: Clear dome and more focused light provides even brighter indication when used in high ambient light areas 

Indicator Response Time 

Indicator ON/OFF: 1 ms max 

## Indicator Characteristics 

**==> picture [130 x 176] intentionally omitted <==**

**----- Start of picture text -----**<br>
Dominant  Color<br>Wavelength  Coordinates [(1)]<br>Lumen Output<br>(nm) or<br>Color  (Typical at 25<br>Color Temperature  X Y °C)<br>(CCT)<br>S18L &<br>S18DL S18L Only S18L S18DL<br>Green 520-535 nm – – 4.1 2.3<br>Red 620-630 nm – – 1.1 1.4<br>Yellow 585-595 nm – – 0.8 1.2<br>Blue 465-475 nm – – 0.6 0.6<br>Orange 600-615 nm – – 4 4<br>White 5665-9000 K – – 0.8 0.9<br>Turquoise – 0.19 0.34 2.4 NA [(2)]<br>Violet – 0.21 0.11 0.5 NA [(2)]<br>Magenta – 0.35 0.15 0.5 NA [(2)]<br>**----- End of picture text -----**<br>


(1) Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates. (2) Colors not available in this model. 

Environmental Rating Rated IP67, and IP69K per ISO 20653. Cabled models meet DIN IP69K if the cable is protected from high-pressure spray . Indicator side of terminal models meet IP67, and IP69K per ISO 20653 when installed in an enclosure. Screw connection points meet IP00. Meets UL Type 4X and UL Type 13 when mounted in a UL Type 4X or Type 13 enclosure. 

Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. 

Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go 

## to www.bannerengineering.com. 

**==> picture [145 x 104] intentionally omitted <==**

**----- Start of picture text -----**<br>
Supply  Required  Supply  Required<br>Wiring  Overcurrent  Wiring  Overcurrent<br>(AWG) Protection (A) (AWG) Protection (A)<br>20 5.0 26 1.0<br>22 3.0 28 0.8<br>24 2.0 30 0.5<br>Construction<br>UV-stabilized polycarbonate housing<br>PBT mounting nut max torque 2.3 N·m (20 lbf·in)<br>Nitrile sealing washer<br>**----- End of picture text -----**<br>


## Connections 

Integral 4-pin M12 male quick-disconnect connector, 150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect connector, or 4-wire, 2 m (6.5 ft) PVC integral cable, 4 colorcoded screw terminals for up to 16 AWG wire, depending on model, screw terminal max. torque 0.11 N·m (1.0 lbf·in) 

Operating Conditions –40 °C to +60 °C (–40 °F to +140 °F) Limited to one color on at a time Certifications 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

Turck Banner LTD Blenheim House Blenheim Court Wickford, Essex SS11 8YT GREAT BRITAIN 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 2 

25-Aug-25 

EZ-LIGHT® S18L General Purpose Indicators 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [40 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
Max. screw torque<br>0.11 Nm [1.0 lbf-in]<br>**----- End of picture text -----**<br>


QD Models Cable Models Terminal Models 

## Accessories 

## Cordsets 

**==> picture [500 x 271] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Single-Ended M12 Female Cordsets<br>Model  Length  Style  Dimensions  Pinout (Female)<br>MQDC-406 2 m (6.56 ft)  44 Typ.<br>MQDC-415 5 m (16.4 ft)<br>MQDC-430 9 m (29.5 ft)  2<br>M12 x 1 1<br>Straight  ø 14.5 3<br>Ø5.2 mm 4 5<br>MQDC-450 15 m (49.2 ft)<br>7 mm<br>58 mm 1 = Brown<br>2 = White<br>3 = Blue<br>MQDC-406RA 2 m (6.56 ft)  32 Typ. 4 = Black<br>MQDC-415RA 5 m (16.4 ft)  [1.26"] 5 = Not used<br>MQDC-430RA 9 m (29.5 ft)<br>30 Typ. 2<br>[1.18"] 3<br>1<br>Right-Angle  4<br>M12 x 1<br>MQDC-450RA 15 m (49.2 ft)  ø 14.5 [0.57"]<br>Ø5.2 mm<br>7 mm<br>58 mm<br>**----- End of picture text -----**<br>


## Brackets 

All measurements are listed in millimeters, unless noted otherwise. The measurements provided are subject to change. 

## SMB18A 

- 30 

- • Right-angle mounting bracket with a curved slot for versatile orientation • 12-ga. stainless steel C 41 • 18 mm sensor mounting hole A B • Clearance for M4 (#8) hardware 

- Hole center spacing: A to B = 24.2 46 Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

25-Aug-25 

page 3 

EZ-LIGHT® S18L General Purpose Indicators 

**==> picture [439 x 196] intentionally omitted <==**

**----- Start of picture text -----**<br>
C<br>• Flat SMBAMS series bracket with 18 mm hole<br>• Articulation slots for 90+° rotation 78<br>• 12-ga. (2.6 mm) cold-rolled steel A<br>Hole center spacing:  A = 26.0, A to B = 13.0<br> A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0 B<br>45<br>• Protective, swivel bracket with tilt and pan movement for precision adjustment 44<br>• Easy sensor mounting to extruded rail T-slots<br>• Metric and inch size bolts available 51<br>• Mounting hole for 18 mm sensors<br>ø18.1<br>B = ø 18.1<br>ø19.8<br>51<br>SMB18AFA = 3/8 - 16 × 2 in<br>SMB18AFAM10 = M10 - 1.5 × 50<br>**----- End of picture text -----**<br>


## SMBAMS18P 

Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0 

## SMB18AFA.. 

## Hole size: B = ø 18.1 

Bolt Thread (A): SMB18AFA = 3/8 - 16 × 2 in SMB18AFAM10 = M10 - 1.5 × 50 

## SMBAMS18RA 

- Right-angle SMBAMS series bracket with 18 mm hole 

- • Articulation slots for 90+° rotation • 12-ga. (2.6 mm) cold-rolled steel 

- Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0 

**==> picture [73 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
40<br>C<br>48<br>A<br>45<br>B<br>**----- End of picture text -----**<br>


## SMBC18 

- 18 mm sensor mounting hole 

- • Snaps onto 28 mm diameter structural framing 

- A = ø 26.9 mm Hole size: B = ø 18.4 

## LMB1822FM 

- Adaptor for mounting the S18L into standard 22 mm holes 

- • Includes adaptor, nut, and gasket 

**==> picture [75 x 105] intentionally omitted <==**

**----- Start of picture text -----**<br>
34 A<br>B<br>66<br>M18 X 1<br>18<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

25-Aug-25 

page 4