S15LPSQ.

## S15L Pro with Modbus Status Indicator 

## Datasheet 

## 15 mm Multicolor RGB Indicator 

For complete technical information about this product, including installation instructions, application requirements and guidelines, technical specifications, dimensions, and accessories, please refer to the manual at www.bannerengineering.com. Follow the link below to go to the product series web page, and search for the S15L Pro with Modbus Status Indicator manual, p/n 235708, in the Downloads. Additionally, for complete information on configu­ ration, performance, and troubleshooting, search p/n 209995 to view the PICK­IQ™ Device Register Map. Use of this document assumes familiarity with pertinent industry standards and practices. www.bannerengineering.com/s15lpro 

## Models 

**==> picture [500 x 142] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model Housing Style Control Connector<br>S15LPSQ S15 Pro Serial/PICK­IQ™ Integral 4-pin M12 male/female quick-disconnect connector<br>Wiring<br>4-pin M12 Male 4-pin M12 Female Pin Wire Color Description<br>1 Brown 10 V DC to 30 V DC<br>1<br>2<br>2 1 3 Blue DC Common<br>4 3 4 Black RS-485 (-)<br>3 4<br>2 White RS-485 (+)<br>**----- End of picture text -----**<br>


## Specifications 

|Specifications|||
|---|---|---|
|Supply Voltage|Environmental Rating|Connections|
|10 V DC to 30 V DC|IP65, IP67, IP68, UL Type 1|Integral 4-pin M12 male/female quick-disconnect|
|||connector|
|Supply Current<br>80 mA maximum current at 10 V DC|Construction<br>Coupling Material: Nickel-plated brass|Models with a quick disconnect require a mating<br>cordset|
|50 mA typical at 24 V DC|Connector Body: PVC translucent white|Certifications|
|Supply Protection Circuitry|Vibration and Mechanical Shock||
|Protected against reverse polarity and transient<br>voltages<br>Operating Conditions<br>–40 °C to +40 °C (–40 °F to +104 °F)|Meets IEC 60068-2-6 requirements (Vibration: 10<br>Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep,<br>30 minutes dwell)<br>Meets IEC 60068-2-27 requirements (Shock: 30G<br>11 ms duration, half sine wave)|Banner Engineering BV<br>Park Lane, Culliganlaan 2F bus 3<br>1831 Diegem, BELGIUM|
|Humidity:90% at +50 °C maximum relative humidi­|||
|ty (non-condensing)|||
|Storage Temperature:–40 °C to +70 °C (–40 °F to|||
|+158 °F)|||
|Key Accessories|||
|Refer to the manual for additional accessories and|complete information.||
|MQDC-406|LMBM12MAG|LMBS15MAG|
|Straight 4­pin threaded M12 cordset—single ended|Magnetic bracket for use with M12 cordsets|Magnetic bracket for use with S15 devices|
|MQDEC-401SS|LMBM12SP|LMBS15SP|
|Straight 4­pin threaded M12 cordset—double end­|Pack of seven snap clip brackets for use with M12|Pack of five snap clip brackets for use with S15 de­|
|ed|cordsets|vices|



## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engi­ neering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMI­ TATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PER­ FORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCI­ DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Original Instructions July 27, 2023 

© Banner Engineering Corp. 

p/n: 234653 Rev. A 

234653 

S15L Pro with Modbus Status Indicator 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 2 

July 27, 2023 

© Banner Engineering Corp.