S15CM-PW-UQ

## S15C Analog to Pulsed I/O Converter 

## Datasheet 

- 

- 

- 

- Compact converter that connects to a current source (4 mA to 20 mA) or a voltage source (0 V DC to 10 V DC), and outputs the value as a pulsed signal, either PFM or PWM 

- Rugged over-molded design meets IP65, IP67, and IP68 

- Connects directly to a Pulse Pro enabled indicator or anywhere in-line for ease of use 

## Models 

**==> picture [415 x 80] intentionally omitted <==**

**----- Start of picture text -----**<br>
Housing Function Signal Conversion Flow Female Male Connector<br>S15 C M – PF – I Q<br>M = Male to Female I = Analog Current<br>U = Analog Voltage<br>C = Converter PF = Pulse Frequency Modulation (PFM) Q = Integral M12 quick disconnect<br>PW = Pulse Width Modulation (PWM)<br>**----- End of picture text -----**<br>


## Pulsed I/O 

Pulse Frequency Modulation (PFM) is a digital way to represent an analog value by varying the frequency of a pulse train. It is measured in Hertz (Hz). 

Pulse Width Modulation (PWM) is a digital way to represent an analog value by varying the width of pulses at a constant frequency. The duty cycle (on-time versus off-time) is measured in percent from 0-100. 

## Wiring Diagrams 

**==> picture [500 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
Male Female Pin Wire Color<br>1 Brown<br>2 1 1 2 23 WhiteBlue<br>4 3<br>4 4 Black<br>3<br>**----- End of picture text -----**<br>


|Male (Analog Input)|Signal Description|Female (Pulse Output)|Signal Description|
|---|---|---|---|
|Pin 1|12 V DC to 30 V DC|Pin 1|12 V DC to 30 V DC|
|Pin 2|Analog Input (4 mA to 20 mA, or 0 V to 10 V)|Pin 2|Pulse Frequency Modulated (PFM) Output*|
|Pin 3|Ground|Pin 3|Ground|
|Pin 4|Analog Reference|Pin 4|Pulse Width Modulated (PWM) Output*|



*Only one output per device based on model 

## Status Indicators 

## Power LED Indicator (Green) 

- Solid = Power On 

- Off = Power Off 

Pulsed I/O LED Indicator (Amber) 

   - Solid = Pulsed output is in range and active 

   - Flashing = Pulsed output is at limits 

   - Off = Pulsed output is inactive 

- Analog Input LED Indicator (Amber) 

   - Solid = Analog value is within valid range (4 mA to 20 mA, or 0 V to 10 V) 

|Default Value Table|Default Value Table|Default Value Table|
|---|---|---|
|Analog|PFM|PWM|
|0 V|100 Hz|0%|
|10 V|600 Hz|100%|
|4 mA|100 Hz|0%|
|20 mA|600 Hz|100%|



- Flashing = Output is at limits or out of range 

Original Document 219855 Rev. D 

8 December 2021 

219855 

S15C Analog to Pulsed I/O Converter 

## Connecting a Pro Light to a Sensor or PLC 

A = WLS27 Pro, WLS15 Pro, or TL50 Pro with Pro Editor **A** B = Power Supply (PSW-24-1 or PSD-24-4) C = S15C Pulse Pro Converter; for model selection, see Table 1 below D = Sensor or PLC with 0-10 V or 4-20 mA analog output; for model selection, see Table 1 below E = Splitter to connect sensor and light (CSB-M1241M1241) Table 1: Model Selection Input: Analog (Male) Output: Pulse Pro (Female) **C** 4-20 mA 0-10 V PFM S15CM-PF-IQ S15CM-PF-UQ **D** ~~=~~ PWM S15CM-PW-IQ S15CM-PW-UQ **E** • 0-10 V Analog Sensor **Signal From: In:** 0-10 V or 4-20 mA **Male Female Out:** PFM or PWM • WLS27 Pro **Connect to:** • 4-20 mA Analog Sensor • WLS15 Pro **B** • 0-10 V PLC Output • TL50 Pro • 4-20 mA PLC Output • PFM or PWM Input Device Note: For installation flexibility, see double-ended cordset options in Accessories on page 3. Specifications Supply Voltage Environmental Rating 12 V DC to 30 V DC at 50 mA maximum exclusive of load IP65, IP67, IP68 PWM/PFM output: 50 mA maximum NEMA/UL Type 1 Supply Protection Circuitry Operating Conditions Protected against reverse polarity and transient voltages Temperature: –40 °C to +70 °C (–40 °F to +158 °F) Sampling Rate 90% at +70 °C maximum relative humidity (non-condensing) 20 Hz Storage Temperature: –40 °C to +80 °C (–40 °F to +176 °F) Indicators Required Overcurrent Protection Green power Amber pulse output present WARNING: Electrical connections must be made by Amber analog value present AY qualified personnel in accordance with local and Connections national electrical codes and regulations. Integral male/female 4-pin M12 quick disconnect Construction Overcurrent protection is required to be provided by end product application per thesupplied table.supplied table. Coupling Material: Nickel-plated brass Overcurrent protection may be provided with external fusing or via Current Limiting, Connector Body: PVC translucent black Class 2 Power Supply. Vibration and Mechanical Shock Supply wiring leads < 24 AWG shall not be spliced. 

## Specifications 

**==> picture [492 x 138] intentionally omitted <==**

**----- Start of picture text -----**<br>
WARNING:  Electrical connections must be made by<br>Amber analog value present AY qualified personnel in accordance with local and<br>Connections national electrical codes and regulations.<br>Integral male/female 4-pin M12 quick disconnect<br>Construction<br>Overcurrent protection is required to be provided by end product application per thesupplied table.supplied table.<br>Coupling Material: Nickel-plated brass Overcurrent protection may be provided with external fusing or via Current Limiting,<br>Connector Body: PVC translucent black Class 2 Power Supply.<br>Vibration and Mechanical Shock Supply wiring leads < 24 AWG shall not be spliced.<br>Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm amplitude, 5 For additional product support, go to www.bannerengineering.com.<br>minutes sweep, 30 minutes dwell)<br>Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave) Supply Wiring (AWG) Required Overcurrent Protection (Amps)<br>Certifcations 20 5.0<br>22 3.0<br>24 2.0<br>26 1.0<br>28 0.8<br>Advanced Capabilities 30 0.5<br>ce ® ————<br>**----- End of picture text -----**<br>


## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. 

**==> picture [415 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
57.8<br>[2.27]<br>27.9<br>[1.1]<br>15.0<br>[0.59]<br>M12 X 1  - 6H<br>M12 X 1  - 6g<br>**----- End of picture text -----**<br>


P/N 219855 Rev. D 

www.bannerengineering.com - Tel: + 1 888 373 6767 

2 

S15C Analog to Pulsed I/O Converter 

Accessories 

Cordsets 

**==> picture [501 x 507] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||||||
|---|---|---|---|---|---|---|---|
|4-Pin Threaded M12 Cordsets—Double Ended|
|||
|Model|Length|Style|Dimensions|Pinout|
|sO|
|MQDEC-401SS|0.31 m (1 ft)|Female|
|MQDEC-403SS|0.91 m (2.99 ft)|
|40 Typ.|2|
|MQDEC-406SS|1.83 m (6 ft)|[1.58"]|1|
|3|
|4|
|M12 x 1|
|Male|
|(a|e|ø 14.5 [0.57"]|A,|
|Male Straight/Female|
|Straight|44 Typ.|
|[1.73"]|1|
|MQDEC-430SS|9.14 m (30.2 ft)|2|
|4|
|3|
|M12 x 1|
|ora|ø 14.5 [0.57"]|l|KD)|
|1 = Brown|
|2 = White|
|3 = Blue|
|4 = Black|
|5-Pin Threaded M12 Shielded Twisted Pair Cordsets—Double Ended|
|RC|
|Model|Length|Style|Dimensions|Pinout (Female)|
|a|
|44 mm|
|max.|2|
|=|1|
|3|
|4|5|
|M12 x 1|
|MQDEC-STP-501SS-FF|0.31 m (1 ft)|Female Straight/|(Gun|es|ø 14.5|
|Female Straight|44 mm|1 = Brown|
|max.|2 = White|
|3 = Blue|
|4 = Black|
|M12 x 1|
|ora|ø 14.5|5 = Shield|
|4-Pin Threaded M12 Splitter Cordsets—Flat Junction|
|Cn|
|Model|Branches (Female)|Trunk (Male)|Pinout|
|a|CSB-M1240M1240|No branch|No trunk|
|Female|
|CSB-M1240M1241|No trunk|
|CSB-M1241M1241|0.30 m (1 ft)|2|
|1|
|CSB-M1248M1241|2.44 m (8 ft)|
|CSB-M12415M1241|2 × 0.3 m (1 ft)|4.57 m (15 ft)|4|3|
|CSB-M12425M1241|7.60 m (25 ft)|
|Male|
|CSB-UNT425M1241|7.60 m (25.0 ft) Unterminated|
|40 Typ.|[0.18"]Ø4.5|[0.71"]18.0|44 Typ.[1.73"]|2|1|
|[1.58"]|
|4|
|j\|_—|Ø14.5 [0.57"]|3|)|
|Ø14.5 [0.57"]|
|Mi|wIM=a4]||)|©|eS|ul|M12 x 1|)|
|1 = Brown|
|M12 x 1|!|8|Th)|2 = White|
|35 [1.38"]|[1.69"]43.0|4 = Black3 = Blue|

**----- End of picture text -----**<br>


P/N 219855 Rev. D 

www.bannerengineering.com - Tel: + 1 888 373 6767 

3 

S15C Analog to Pulsed I/O Converter 

## Banner Engineering Corp. Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

## FCC Part 15 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. 

## Industry Canada 

This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. 

Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. 

© Banner Engineering Corp. All rights reserved