S15CM-PP-MQ

S15CM Modbus® to PWM and PFM Converter 

## S15CM Features 

- Compact converter that connects to a Modbus® device and outputs the value as a pulsed signal, either PFM or PWM 

- Modbus registers are used to define PWM and PFM setting 

- Outputs can be independently configured as NPN or PNP 

- • Rugged overmolded design meets IP65, IP67, and IP68 • Connects directly to a sensor or anywhere in-line for ease of use 

**==> picture [116 x 46] intentionally omitted <==**

## S15CM Models 

**==> picture [500 x 51] intentionally omitted <==**

**----- Start of picture text -----**<br>
Housing Function - Female Port - Male Port Connector<br>S15 CM - PP - M Q<br>CM=Converter Male Input PP=PFM and PWM M=Modbus Q=Integral M12 quick disconnect<br>**----- End of picture text -----**<br>


## Configuration Instructions 

## Sensor Configuration Software 

The Sensor Configuration Software offers an easy way to manage converter Modbus settings, retrieve data, and visually show converter data. The Sensor Configuration Software runs on any Windows machine and uses an adapter cable (BWA-UCT-900, p/n 19970) to connect the converter to the computer. 

Download the most recent version of the Sensor Configuration Software from the Banner Engineering website: https:// info.bannerengineering.com/cs/groups/public/documents/software/b_3128586.exe. 

## Modbus Configuration 

## Pin 4 Port Configuration 

**==> picture [500 x 345] intentionally omitted <==**

**----- Start of picture text -----**<br>
Modbus Register Address Description I/O Range Comments Default Access Notes<br>40200 Pin 4 IO Selection 4..5 4 = NPN output push/pull 4 RW —<br>5 = PNP output push/pull<br>0 = Disabled<br>40201 Pin 4 Mode 0, 7, 8 7 = PWM 7 RW PFM 50% duty cycle<br>8 = PFM<br>40202 Pin 4 PWM Base Freq 50..50,000 PWM Base Frequency (Hz) 500 RW PWM base freq = 50<br>(Hz)..50K (Hz)<br>PWM % = 0..100<br>40203 Pin 4 Percentage 0..100 PWM Percentage 100 RW<br>If PWM % > 100, = 100<br>40204 Pin 4 PFM Frequency 50..50,000 PFM Frequency 50,000 RW PFM 50 (Hz)..50K (Hz)<br>Pin 2 Port Configuration<br>Modbus Register Address Description I/O Range Comments Default Access Notes<br>40300 Pin 2 IO Selection 4..5 4 = NPN output push/pull 5 RW —<br>5 = PNP output push/pull<br>0 = Disabled<br>40301 Pin 2 Mode 0, 7, 8 7 = PWM 8 RW PFM 50% duty cycle<br>8 = PFM<br>40302 Pin 2 PWM Base Freq 200..4000 PWM Base Frequency (Hz) 500 RW PWM base freq = 50<br>(Hz)..50K (Hz)<br>PWM % = 0..100<br>40303 Pin 2 Percentage 0..100 PWM Percentage 100 RW<br>If PWM % > 100, = 100<br>40304 Pin 2 PFM Frequency 50..50,000 PFM Frequency 50,000 RW PFM 50 (Hz)..50K (Hz)<br>Modbus Configuration<br>Modbus Register Address Description I/O Range Comments Default Access<br>0 = 9.6k 0 = 9600<br>40601 Baud Rate 1 = 19.2k 1 = 19200 1 RW<br>2 = 38.4k 2 = 38400<br>Continued on page 2<br>**----- End of picture text -----**<br>


Original Instructions 08-Jul-24 

p/n: 224486 Rev. D 

© Banner Engineering Corp. All rights reserved. 

S15CM Modbus® to PWM and PFM Converter 

**==> picture [500 x 275] intentionally omitted <==**

**----- Start of picture text -----**<br>
Continued from page 1<br>Modbus Register Address Description I/O Range Comments Default Access<br>0 = None 0 = None<br>40602 Parity 1 = Odd 1 = Odd 0 RW<br>2 = Even 2 = Even<br>40603 Address 1-254 - 1 RW<br>40604 Reserved (cannot be read or  None - - RW<br>written)<br>40605 Restore Factory Configuration 0 = No Operation, 1 = Restore - - WO<br>Device Information<br>Modbus Register  Description I/O Range Comments Default Access Notes<br>Address [(1)]<br>40606-40615 Banner Name 0..65535 - Banner Engineering RO (9 words/18 characters)<br>40616-40631 Product Name 0..65535 - S15CM-PP-MQ RO (16 words/32 characters)<br>40632 Item H 0..65535 12 RO Banner Item Number<br>812607 split into<br>40633 Item L 0..65535 two 16-bit registers 26175 RO -<br>40634 Serial Number H 0..65535 - - RO<br>40635 Serial Number 0..65535 - - RO<br>Serial Number is split into four<br>40636 Serial Number 0..65535 - - RO 16-bit registers<br>40637 Serial Number L 0..65535 - - RO<br>User writable<br>40644-40659 User Define Tag 0..65535 More Sensors. More Solutions. RW (16 words/32 characters)<br>space<br>**----- End of picture text -----**<br>


## S15CM Wiring Diagrams 

**==> picture [500 x 126] intentionally omitted <==**

**----- Start of picture text -----**<br>
Input: Output:<br>Modbus PWM and/or PFM (NPN or PNP)<br>Male Female Pin Wire Color<br>1 Brown<br>1<br>2 2 White<br>2 1<br>4 3 3 Blue<br>4 4 Black<br>3 5<br>5 (male only) Gray (male only)<br>**----- End of picture text -----**<br>


## Connecting Devices with Discrete Inputs/Outputs 

**==> picture [251 x 64] intentionally omitted <==**

**----- Start of picture text -----**<br>
Output: Input:<br>1 1 (bn)<br>12 V DC to 30 V DC 12 V DC to 30 V DC<br>2 2 (wh)<br>Discrete 2 (PWM/PFM) RS485/D1/B/+<br>4 4 (bk)<br>Discrete 1 (PWM/PFM) RS485/D0/A/-<br>3 3 (bu)<br>Ground Ground<br>5 (gy)<br>Banner 1-wire<br>**----- End of picture text -----**<br>


## S15CM Status Indicators 

## Power LED Indicator (Green) 

- Solid Green = Power On 

- Off = Power Off 

Modbus Communication LED Indicator (Amber) 

   - Flashing Amber (4 Hz) = Modbus communications are active 

   - Solid Amber for 2 Seconds to Off = Modbus communications are lost after connection 

   - Solid Amber for 2 Seconds to Flashing Amber (4 Hz) = Modbus communications momentarily lost, but communication reestablished 

   - Solid Amber = Modbus communications are intermittent, or communications error occurs more frequently than once every 2 seconds 

- (1) Registers are big endian. 

page 2 

08-Jul-24 

© Banner Engineering Corp. All rights reserved. 

S15CM Modbus® to PWM and PFM Converter 

- Off = Modbus communications are not present 

## S15CM Specifications 

## Supply Voltage 

12 V DC to 30 V DC at 50 mA maximum Power Pass-Through Current 4 A maximum 

Supply Protection Circuitry 

Protected against reverse polarity and transient voltages 

Discrete Output Ratings 

OFF-state leakage current: 

NPN: 300 µA PNP: 10 µA 

ON-state saturation voltage: 

NPN: 2 V at 50 mA PNP: 2 V at 50 mA 

## Indicators 

Green: Power Amber: Modbus communications 

## Construction 

Coupling Material: Nickel-plated brass Connector Body: PVC translucent black 

## Vibration and Mechanical Shock 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave) 

Environmental Rating IP65, IP67, IP68 

NEMA/UL Type 1 

## Operating Conditions 

Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

90% at +70 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +80 °C (–40 °F to +176 °F) 

Advanced Capabilities 

Connections Integral male/female 4-pin M12 quick disconnect 

|Advanced Capabilities<br>llpROTS||
|---|---|
|Continued from page 2<br>Supply<br>Wiring<br>(AWG)<br>Required Overcurrent<br>Protection (A)<br>Supply<br>Wiring<br>(AWG)<br>22<br>3.0<br>28<br>24<br>1.0<br>30|Required Overcurrent<br>Protection (A)<br>0.8<br>0.5|
|Certifications||



## Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. 

**==> picture [394 x 109] intentionally omitted <==**

**----- Start of picture text -----**<br>
Overcurrent protection may be provided with external fusing  Banner Engineering BV<br>or via Current Limiting, Class 2 Power Supply. Park Lane, Culliganlaan 2F bus 3<br>CE 1831 Diegem, BELGIUM<br>Supply wiring leads < 24 AWG shall not be spliced.<br>For additional product support, go  Turck Banner LTD Blenheim House<br>to www.bannerengineering.com.  UK Blenheim Court<br>Wickford, Essex SS11 8YT<br>Supply  Supply  cA GREAT BRITAIN<br>Required Overcurrent  Required Overcurrent<br>Wiring  Wiring<br>Protection (A) Protection (A)<br>(AWG) (AWG) PROGRAMMABLE<br>CONTROLLER<br>20 5.0 26 1.0 E316212<br>Wr<br>Continued on page 4<br>**----- End of picture text -----**<br>


Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

## FCC Part 15 Class B for Unintentional Radiators 

(Part 15.105(b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for help. 

(Part 15.21) Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. 

## Industry Canada Statement for Intentional Radiators 

This device contains licence-exempt transmitters(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 

1. This device may not cause interference. 

2. This device must accept any interference, including interference that may cause undesired operation of the device. 

Cet appareil contient des émetteurs/récepteurs exemptés de licence conformes à la norme Innovation, Sciences, et Développement économique Canada. L’exploitation est autorisée aux deux conditions suivantes: 

1. L’appareil ne doit pas produire de brouillage. 

2. L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. 

08-Jul-24 

page 3 

© Banner Engineering Corp. All rights reserved. 

S15CM Modbus® to PWM and PFM Converter 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. 

**==> picture [232 x 118] intentionally omitted <==**

**----- Start of picture text -----**<br>
57.8<br>[2.27]<br>27.9<br>[1.1]<br>15.0<br>[0.59]<br>M12 X 1  - 6g<br>**----- End of picture text -----**<br>


M12 X 1  - 6H 

## Accessories 

## Cordsets 

**==> picture [500 x 199] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-Pin Threaded M12 Cordsets—Double Ended<br>Model  Length  Style  Dimensions  Pinout<br>MQDEC-401SS  0.31 m (1 ft)   Female<br>MQDEC-403SS 0.91 m (2.99 ft)<br>2<br>MQDEC-406SS 1.83 m (6 ft)  40 Typ.[1.58"] 1<br>MQDEC-412SS  3.66 m (12 ft)  4 3<br>MQDEC-415SS 4.58 m (15 ft) M12 x 1<br>MQDEC-420SS  6.10 m (20 ft)  Male Straight/Female  ø 14.5 [0.57"] Male<br>MQDEC-430SS  9.14 m (30.2 ft)  Straight  44 Typ. 1<br>[1.73"]<br>2<br>4<br>M12 x 1 3<br>MQDEC-450SS  15.2 m (49.9 ft)  ø 14.5 [0.57"]<br>1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black<br>**----- End of picture text -----**<br>


## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

Document title: S15CM Modbus® to PWM and PFM Converter Part number: 224486 Revision: D Original Instructions © Banner Engineering Corp. All rights reserved. 

**==> picture [81 x 43] intentionally omitted <==**

**----- Start of picture text -----**<br>
224486<br>**----- End of picture text -----**<br>


08-Jul-24 

page 4 

© Banner Engineering Corp. All rights reserved.