S15C-RTD-MQ

S15C Resistance Temperature Detector to Modbus® Converter 

## Features 

- Compact converter that connects to a resistance temperature detector (RTD) and outputs the value to Modbus® registers 

- Rugged overmolded design meets IP65, IP67, and IP68 

- • Connects directly to a sensor or anywhere in-line for ease of use • For use with PT100 3-wire RTDs 

## Models 

**==> picture [481 x 43] intentionally omitted <==**

**----- Start of picture text -----**<br>
House Function - Female End - Male End Connector<br>S15 C - RTD - M Q<br>C = Converter RTD = Resistance  M = Modbus Q = Integral 4-pin M12 quick-<br>temperature detector disconnect connector<br>**----- End of picture text -----**<br>


## SNAP SIGNAL Configuration Software 

Banner's SNAP SIGNAL Configuration Software offers an easy way to configure and demonstrate Banner Modbus devices. 

Users have full control of device configuration, the ability to visualize device data, and to demonstrate device features. The easy-to-use software provides a variety of tools and works with Banner Modbus devices. 

- Allows for the configuration and demo of Banner Modbus devices 

- Free to download and available on the Banner website at https:// www.bannerengineering.com/sg/en/products/software/snap-signalconfiguration-software.html 

- Works on Microsoft® Windows® 7 and 10[(1)] 

- BWA-UCT-900 cable required to connect PC-based SNAP SIGNAL Configuration Software to Banner Modbus devices 

## Modbus Configuration 

**==> picture [40 x 6] intentionally omitted <==**

**----- Start of picture text -----**<br>
IO Data Out<br>**----- End of picture text -----**<br>


**==> picture [490 x 206] intentionally omitted <==**

**----- Start of picture text -----**<br>
Modbus Register Address Type Name I/O Range Description Notes Default<br>40001 int16, Read only IO Data Temperature °C = -2000 to +8500 Temperature °C = Data Output ÷ 10 -<br>40002 int16, Read only IO Data Temperature °F = -3280 to +15620 Analog Data output 1 Temperature °F = Data Output ÷ 10 -<br>40003 int16, Read only IO Data Resistance = 185.2 to 3904.8 Resistance = Data Output ÷ 10 -<br>IO Data Rate<br>Modbus Register Address Type Name I/O Range Description Notes Default<br>41201 int16, Read/write Sample IO - Sample interval time for IO Minimum rate: 50 ms 1000 (1 sec)<br>Modbus Configuration<br>Modbus Register Address Description I/O Range Comments Default Access<br>40601 Baud Rate 0 = 9.6k, 1 = 19.2k, 2 = 38.4k 0 = 9600, 1 = 19200, 2 = 38400 1 Read/write<br>40602 Parity 0 = None, 1 = Odd, 2 = Even 0 = None, 1 = Odd, 2 = Even 0 Read/write<br>40603 Address 1-254 - 1 Read/write<br>40604 Reserved (cannot be read or written) None - - -<br>40605 Restore Factory Configuration 0 = No Operation, 1 = Restore - - Write only<br>**----- End of picture text -----**<br>


- (1) Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. 

Original Instructions 13-May-25 

© Banner Engineering Corp. All rights reserved. 

www.bannerengineering.com 

p/n: 224482 Rev. E 

S15C Resistance Temperature Detector to Modbus® Converter 

## Device Information 

|Modbus Register<br>Address|Description|I/O Range|Comments|Default|Access|Notes|
|---|---|---|---|---|---|---|
|40606-40615|Banner Name|0..65535|-|Banner Engineering|Read only|(9 words/18 characters)|
|40616-40631|Product Name|0..65535|-|S15C-RTD-MQ|Read only|(16 words/32 characters)|
|40632|Item H|0..65535|812241 is split into<br>two 16-bit registers|12|Read only|Banner item number|
|40633|Item L|0..65535||28561|Read only|-|
|40634|Serial Number H|0..65535|-|-|Read only|The serial number is split into four 16-bit<br>registers|
|40635|Serial Number|0..65535|-|-|Read only||
|40636|Serial Number|0..65535|-|-|Read only||
|40637|Serial Number L|0..65535|-|-|Read only||
|40644-40659|User-Defined Tag|0..65535|User writable<br>space|More Sensors. More Solutions.|Read/write|(16 words/32 characters)|



## Wiring 

**==> picture [398 x 149] intentionally omitted <==**

**----- Start of picture text -----**<br>
Female: Male:<br>1 1 (bn)<br>10 V DC to 30 V DC<br>2 2 (wh)<br>RS485/D1/B/+<br>RE 4 4 (bk) RS485/D0/A/-<br>3 3 (bu)<br>Ground<br>Element<br>Male (Gateway) Female (Sensor) Pin Wire Color<br>1 1 Brown<br>2<br>2 (FP 1 2 White<br>4 3 3 Blue<br>3 4<br>4 Black<br>**----- End of picture text -----**<br>


## Status Indicators 

Power LED Indicator (Green) Modbus Communication LED Indicator (Amber) Solid Green = Power On Flashing Amber = Modbus communications are active Off = Power Off Off = Modbus communications are not present 

## Specifications 

Supply Voltage 10 V DC to 30 V DC at 50 mA maximum 

Supply Protection Circuitry Protected against reverse polarity and transient voltages 

Leakage Current Immunity 400 µA 

Resolution 14 bits Accuracy ± 3 °C Indicators Green: Power Amber: Modbus communications Connections 

Construction Coupling Material: Nickel-plated brass Connector Body: PVC translucent black 

Vibration and Mechanical Shock 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave) 

Environmental Rating IP65, IP67, IP68 NEMA/UL Type 1 

Operating Conditions 

Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 

90% at +70 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +80 °C (–40 °F to +176 °F) 

4-pin M12 male/female quick-disconnect connector Product Identification 

page 2 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

13-May-25 

S15C Resistance Temperature Detector to Modbus® Converter 

## Certifications 

Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM 

Turck Banner LTD Blenheim House Blenheim Court Wickford, Essex SS11 8YT GREAT BRITAIN 

## Required Overcurrent Protection 

WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

|Supply<br>Wiring<br>(AWG)<br>20|Required Overcurrent<br>Protection (A)<br>5.0|Required Overcurrent<br>Protection (A)<br>5.0|Supply<br>Wiring<br>(AWG)<br>26|Required Overcurrent<br>Protection (A)<br>1.0|Required Overcurrent<br>Protection (A)<br>1.0|
|---|---|---|---|---|---|
|22|3.0||28|0.8||
|24|1.0||30|0.5||



## FCC Part 15 Class B for Unintentional Radiators 

(Part 15.105(b)) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- Consult the dealer or an experienced radio/TV technician for help. 

(Part 15.21) Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. 

## Industry Canada ICES-003(B) 

This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 1) This device may not cause harmful interference; and 2) This device must accept any interference received, including interference that may cause undesired operation. 

Cet appareil est conforme à la norme NMB-3(B). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas occasionner d'interférences, et (2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. The measurements provided are subject to change. 

**==> picture [419 x 117] intentionally omitted <==**

**----- Start of picture text -----**<br>
57.8<br>[2.27]<br>27.9<br>[1.1]<br>15.0<br>[0.59]<br>M12 X 1  - 6g M12 X 1  - 6H<br>**----- End of picture text -----**<br>


## Accessories 

Cordsets 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 3 of 6 

13-May-25 

S15C Resistance Temperature Detector to Modbus® Converter 

**==> picture [500 x 566] intentionally omitted <==**

**----- Start of picture text -----**<br>
4-pin A-Code Double-Ended M12 Female to M12 Male Cordsets<br>Model Length Dimensions (mm) Pinouts<br>BC-M12F4-M12M4-22-1 1 m (3.28 ft) Female<br>40 Typ.<br>[1.58"] 2<br>BC-M12F4-M12M4-22-2 2 m (6.56 ft) 1<br>BC-M12F4-M12M4-22-3 3 m (9.84 ft) M12 x 1 4 3 1 = Brown<br>BC-M12F4-M12M4-22-4 4 m (13.12 ft) ø 14.5 [0.57"] 2 = White<br>44 Typ. Male 3 = Blue<br>BC-M12F4-M12M4-22-5 5 m (16.4 ft) [1.73"] 4 = Black<br>1<br>BC-M12F4-M12M4-22-10 10 m (30.81 ft) 2<br>M12 x 1 4<br>BC-M12F4-M12M4-22-15 15 m (49.2 ft) ø 14.5 [0.57"] 3<br>4-pin A-Code Double-Ended M12 Female to M12 Male Right-Angle Cordsets<br>Model Length Dimensions (mm) Pinouts<br>BC-M12F4-M12M4A-22-1 1 m (3.28 ft) Female<br>32 Typ. 2<br>BC-M12F4-M12M4A-22-2 2 m (6.56 ft) [1.26"] 1<br>BC-M12F4-M12M4A-22-5 5 m (16.4 ft) 30 Typ.[1.18"] 4 3 1 = Brown<br>BC-M12F4-M12M4A-22-8 8 m (26.25 ft) M12 x 1 Male 2 = White 3 = Blue<br>BC-M12F4-M12M4A-22-10 10 m (30.81 ft) ø 14.5 [0.57"] 4 = Black<br>ø 14.5 [0.57"] 1<br>44 Typ. M12 x 1 2<br>BC-M12F4-M12M4A-22-15 15 m (49.2 ft) [1.73"] 4<br>3<br>4-pin A-Code Double-Ended M12 Female Right-Angle to M12 Male Right-Angle Cordsets<br>Model Length Dimensions (mm) Pinouts<br>BC-M12F4A-M12M4A-22-0.3 0.3 m (1 ft) Female<br>32 Typ.<br>BC-M12F4A-M12M4A-22-1 1 m (3.28 ft) [1.26"] 1 2<br>BC-M12F4A-M12M4A-22-2 2 m (6.56 ft) 30 Typ.[1.18"] 4 3 1 = Brown<br>BC-M12F4A-M12M4A-22-5 5 m (16.4 ft) 2 = White<br>M12 x 1 Male 3 = Blue<br>BC-M12F4A-M12M4A-22-8 8 m (26.25 ft) ø 14.5 [0.57"] 31 Typ. 1 4 = Black<br>BC-M12F4A-M12M4A-22-10 10 m (30.81 ft) 2<br>32 Typ. 4<br>BC-M12F4A-M12M4A-22-15 15 m (49.2 ft) 3<br>Splitter Tee<br>5-Pin M12 Female to M12 Male Splitter Tee<br>Model  Pinout (Male)  Pinout (Female)<br>1<br>2<br>CSB-M1250M1250-T 2 1<br>• Two 5-pin M12 female quick- 4 3<br>• disconnect connectorsOne 5-pin M12 male quick- 3 5 4 5<br>disconnect connector 1 = Brown<br>• Parallel wiring 2 = White 3 = Blue  1 = Brown 2 = White<br>4 = Black  3 = Blue<br>5 = Gray 4 = Black<br>5 = Gray<br>**----- End of picture text -----**<br>


## 5-Pin Molded Junction Blocks 

page 4 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

13-May-25 

S15C Resistance Temperature Detector to Modbus® Converter 

**==> picture [473 x 146] intentionally omitted <==**

**----- Start of picture text -----**<br>
Model Pinout (Male) Pinout (Female)<br>R50-4M125-M125Q-P  Molded Junction Block<br>• Four integral 5-pin M12 female quick-disconnect<br>connectors<br>• One integral 5-pin M12 male quick-disconnect  1 2<br>•• connectorParallel wiringProduct documentation (p/n 227974) 2 4 1 3<br>3 5 4 5<br>R95-8M125-M125Q-P  Molded Junction Block 1 = Brown 1 = Brown<br>• Eight integral 5-pin M12 female quick-disconnect  2 = White 2 = White<br>connectors 3 = Blue 3 = Blue<br>• One integral 5-pin M12 male quick-disconnect  4 = Black 4 = Black<br>5 = Gray 5 = Gray<br>connector<br>• Parallel wiring<br>• Product documentation (p/n 227974)<br>**----- End of picture text -----**<br>


## Splitter Cordsets 

**==> picture [482 x 290] intentionally omitted <==**

**----- Start of picture text -----**<br>
5-Pin Double-Ended M12 Female to M12 Male Flat Junction Splitter Cordsets<br>Model  Description Pinout (Male)  Pinout (Female)<br>1<br>Four (no cable) 5-pin M12 female quick-disconnect connectors 2<br>2 1<br>CSB4-M1251M1250 One 0.3 m (0.98 ft) cable with a 5-pin M12 male quick-disconnect connector 4 3<br>ie)<br>3 5 4 5<br>Parallel wiring<br>|<br>| Branch 1 5<br>2 x 19 Branch 2<br>72 mm | Branch 3 1 = Brown2 = White3 = Blue 1 = Brown2 = White3 = Blue<br>3 x 18 ; ° (——olM 4 = Black 4 = Black<br>Branch 4 5 = Gray 5 = Gray<br>i ge<br>32 mm Male TrunkLength<br>4-Pin M12 Female RS-485 to USB Adapter Cordset, with Wall Plug<br>Model  Length  Style  Dimensions  Pinout (Female)<br>2 4<br>1 3<br>BWA-UCT-900 1 m (3.28 ft)  Straight<br>1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black<br>**----- End of picture text -----**<br>


## Brackets 

- 15 

- LMBS15MAG Ø15 • Attaches to S15 housing • White polypropylene • 11.8 kg (26 lb) pull force 33 • One piece Ø19 

## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

page 5 of 6 

13-May-25 

S15C Resistance Temperature Detector to Modbus® Converter 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

page 6 of 6 

© Banner Engineering Corp. All rights reserved. www.bannerengineering.com 

13-May-25