S15C-MTH-KQ

## S15C Modbus Master to IO-Link Device Converter for Temperature and Humidity 

## Datasheet 

- Compact Modbus master to IO-Link device converter for use with M12FT3Q Temperature sensor and M12FTH3Q Temperature and Humidity sensor 

- 

- 

   - Predefined ModBus registers are sent over IO-Link automatically 

   - Rugged over-molded design meets IEC IP65, IEC IP67, and IEC IP68 

- Connects directly to a sensor or anywhere in-line for ease of use 

## Models 

**==> picture [499 x 58] intentionally omitted <==**

**----- Start of picture text -----**<br>
Housing Function Female Male Connector<br>S15 C - MTH - K Q<br>C = Converter MTH = Modbus Temperature Humidity K = IO-Link Q = Integral M12/Euro-style quick disconnect<br>**----- End of picture text -----**<br>


## IO-Link[®] 

IO-Link[®] is a point-to-point communication link between a master device and a sensor and/or light. It can be used to automatically parameterize sensors or lights and to transmit process data. For the latest IO-Link protocol and specifications, please visit www.iolink.com. 

For the latest IODD files, please refer to the Banner Engineering Corp website at: www.bannerengineering.com. 

## Process Data In (Device to Master) 

For more information, see Banner P/N 163751 Sure Cross[®] Temperature and Humidity Sensor, Banner P/N 217178 S15C Modbus Converter (Temperature and Humidity) - IO-Link Data Reference Guide, and Banner P/N 217161 S15C-MTH-KQ IODD Files. 

|Process Data In|Process Data In|Process Data In|
|---|---|---|
|Reg Adr 01|40001|Humidity (%RH)|
|Reg Adr 02|40002|Temperature (°C)|
|Reg Adr 03|40003|Temperature (°F)|



## Wiring Diagrams 

|Male|Female|Pin|Wire Color|
|---|---|---|---|
|**1**<br>**4**<br>**3**<br>**2**|**2**<br>**3**<br>**4**<br>**1**|1|Brown|
|||2|White|
|||3|Blue|
|||4|Black|



|Female (Sensor)|Signal Description|
|---|---|
|Pin 1|18 V DC to 30 V DC|
|Pin 2|RS485/D1/B/+|
|Pin 3|Ground|



Original Document 217585 Rev. C 

17 September 2020 

217585 

S15C Modbus Master to IO-Link Device Converter for Temperature and Humidity 

|Female (Sensor)|Signal Description|
|---|---|
|Pin 4|RS485/D0/A/-|
|||
|Male (IO-Link Master)|Signal Description|
|Pin 1|18 V DC to 30 V DC|
|Pin 2|Banner-specifc|
|Pin 3|Ground|
|Pin 4|IO-Link|



## Status Indicators 

## Power LED Indicator (Green) 

- Solid Green = Power On 

- Off = Power Off 

IO-Link Communication LED Indicator (Amber) 

- Flashing Amber (900 ms On, 100 ms Off) = IO-Link communications are active 

- Off = IO-Link communications are not present 

Modbus Communication LED Indicator (Amber) 

- Flashing Amber (4 Hz) = Modbus communications are active 

- Solid Amber for 2 seconds to Off = Modbus communications are lost after connection 

- Solid Amber for 2 seconds to Flashing Amber (4 Hz) = Modbus communications momentarily lost, but communication reestablished 

- Solid Amber = Modbus communications are intermittent, or communications error occurs more frequently than once every 2 seconds 

- Off = Modbus communications are not present 

## Specifications 

Supply Voltage 18 V DC to 30 V DC at 50 mA maximum Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Indicators Green power Amber IO-Link communications Amber ModBus communications 

Connections Integral male/female 4-pin M12/Euro-style quick disconnect 

Construction Coupling Material: Nickel-plated brass Connector Body: PVC translucent black Vibration and Mechanical Shock 

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm amplitude, 5 minutes sweep, 30 minutes dwell) 

Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave) 

Certifcations 

Environmental Rating IEC IP65, IEC IP67, IEC IP68 NEMA/UL Type 1 Operating Conditions Temperature: –40 °C to +70 °C (–40 °F to +158 °F) 90% at +70 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +80 °C (–40 °F to +176 °F) 

Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. 

Overcurrent protection is required to be provided by end product application per the supplied table. 

Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. 

|Supply Wiring (AWG)|Required Overcurrent Protection (Amps)|
|---|---|
|20|5.0|
|22|3.0|
|24|2.0|
|26|1.0|
|28|0.8|
|30|0.5|



P/N 217585 Rev. C 

www.bannerengineering.com - Tel: + 1 888 373 6767 

2 

S15C Modbus Master to IO-Link Device Converter for Temperature and Humidity 

## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. 

**==> picture [415 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
57.8<br>[2.27]<br>27.9<br>[1.1]<br>15.0<br>[0.59]<br>M12 X 1  - 6H<br>M12 X 1  - 6g<br>**----- End of picture text -----**<br>


## Accessories 

## Cordsets 

|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|||
|---|---|---|---|---|---|
|Model|Length|Style|Dimensio|ns|Pinout|
|MQDEC-401SS|0.31 m (1 ft)|Male Straight/<br>Female Straight|40 Typ.<br>[1.58"]<br>ø 14.5 [0.57"]<br>M12 x 1<br>44 Typ.<br>[1.73"]<br>ø 14.5 [0.57"]<br>M12 x 1||Female<br>**2**<br>**3**<br>**4**<br>**1**<br>Male<br>**1**<br>**4**<br>**3**<br>**2**<br>1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black|
|MQDEC-403SS|0.91 m (2.99 ft)|||||
|MQDEC-406SS|1.83 m (6 ft)|||||
|MQDEC-412SS|3.66 m (12 ft)|||||
|MQDEC-420SS|6.10 m (20 ft)|||||
|MQDEC-430SS|9.14 m (30.2 ft)|||||
|MQDEC-450SS|15.2 m (49.9 ft)|||||



## Banner Engineering Corp Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

P/N 217585 Rev. C 

www.bannerengineering.com - Tel: + 1 888 373 6767 

3 

S15C Modbus Master to IO-Link Device Converter for Temperature and Humidity 

## FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) 

This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 

   1. This device may not cause harmful interference, and 

   2. This device must accept any interference received, including interference that may cause undesired operation. 

- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

   - Reorient or relocate the receiving antenna. 

   - Increase the separation between the equipment and receiver. 

   - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

   - Consult the manufacturer. 

© Banner Engineering Corp. All rights reserved