S15C-MEZ-KQ

## S15C Modbus Master to IO-Link Device Converter for EZ-ARRAY 

## Datasheet 

- Compact Modbus master to IO-Link device converter for use with EZARRAY receivers that have ModBus communications (for example, the EA5R-MODQ line) 

- 

- 

- 

- Predefined ModBus registers are sent over IO-Link automatically 

- Rugged over-molded design meets IEC IP65, IEC IP67, and IEC IP68 

- Connects directly to a sensor or anywhere in-line for ease of use 

## Models 

**==> picture [499 x 57] intentionally omitted <==**

**----- Start of picture text -----**<br>
Housing Function Female Male Connector<br>S15 C - MEZ - K Q<br>C = Converter MEZ = Modbus EZ-ARRAY K = IO-Link Q = Integral M12/Euro-style quick disconnect<br>**----- End of picture text -----**<br>


## Installation Instructions 

To connect to the RS-485 connection on the EZ-ARRAY, a 5-pin male-to-male cordset is required. The MQDEC-STP-501SS-MM (part number 806295) is a Banner cordset that can be used to connect the S15C converter to the EZ-ARRAY. 

## Wiring Diagrams 

|Male|Female|Pin|Wire Color|
|---|---|---|---|
|**1**<br>**4**<br>**3**<br>**2**|**2**<br>**3**<br>**4**<br>**1**|1|Brown|
|||2|White|
|||3|Blue|
|||4|Black|



|Female (Sensor)|Signal Description|
|---|---|
|Pin 1|18 V DC to 30 V DC|
|Pin 2|RS485/D1/B/+|
|Pin 3|Ground|
|Pin 4|RS485/D0/A/-|



|Male (IO-Link Master)|Signal Description|
|---|---|
|Pin 1|18 V DC to 30 V DC|
|Pin 2|Banner-specifc|
|Pin 3|Ground|
|Pin 4|IO-Link|



Original Document 217589 Rev. D 

14 December 2020 

217589 

S15C Modbus Master to IO-Link Device Converter for EZ-ARRAY 

## IO-Link[®] 

IO-Link[®] is a point-to-point communication link between a master device and a sensor and/or light. It can be used to automatically parameterize sensors or lights and to transmit process data. For the latest IO-Link protocol and specifications, please visit www.iolink.com. 

For the latest IODD files, please refer to the Banner Engineering Corp website at: www.bannerengineering.com. 

## Process Data In (Device to Master) 

The S15C converter provides for the reading of three user-selectable sets of 15 Modbus Registers. 

For more information, see Banner P/N 126701 A-GAGE[®] EZ-ARRAY[™] System Quick Start Guide, Banner P/N 130426 A-GAGE[®] EZ-ARRAY[™] System Instruction Manual, Banner P/N 217181 S15C Modbus Converter (EZ-ARRAY) - IO-Link Data Reference Guide, and Banner P/N 217164 S15C-MEZ-KQ IODD Files. 

## RegSet 0 

Register Set 0 reads the following Modbus Registers with channel beam states for arrays 1200 mm or less: 

|RegSet 0|RegSet 0|RegSet 0|
|---|---|---|
|Reg Adr 01|30003|Channel 1-16|
|Reg Adr 02|30004|Channel 17-32 (150 mm stick = 30/4 bytes, 2 registers)|
|Reg Adr 03|30005|Channel 33-48|
|Reg Adr 04|30006|Channel 49-64 (300 mm = 60/8 bytes, 4 registers)|
|Reg Adr 05|30007|Channel 65-80|
|Reg Adr 06|30008|Channel 81-96 (450 mm = 90/12 bytes, 6 registers)|
|Reg Adr 07|30009|Channel 97-112|
|Reg Adr 08|30010|Channel 113-128 (600 mm = 120/16 bytes, 8 registers)|
|Reg Adr 09|30011|Channel 129-144|
|Reg Adr 10|30012|Channel 145-160 (750 mm = 150/20 bytes, 10 registers)|
|Reg Adr 11|30013|Channel 161-176|
|Reg Adr 12|30014|Channel 177-192 (900 mm = 180/24 bytes, 12 registers)|
|Reg Adr 13|30015|Channel 193-208|
|Reg Adr 14|30016|Channel 209-224 (1050 mm = 210/28 bytes, 14 registers)|
|Reg Adr 15|30017|Channel 225-240 (1200 mm = 240/30 bytes, 15 registers)|



## RegSet 1 

Register Set 1 reads the following Modbus Registers with measurement values and diagnostic data: 

|RegSet 1|RegSet 1|RegSet 1|
|---|---|---|
|Reg Adr 01|30500|FBB|
|Reg Adr 02|30501|LBB|
|Reg Adr 03|30502|TBB|
|Reg Adr 04|30503|TRN|
|Reg Adr 05|30504|CBB|
|Reg Adr 06|30505|FBM|
|Reg Adr 07|30506|LBM|
|Reg Adr 08|30507|TBM|
|Reg Adr 09|30508|CBM|
|Reg Adr 10|30509|MBB|
|Reg Adr 11|40046|Emitter Power (Low Byte), Gain Method (High Byte)|
|Reg Adr 12|40047|Low sensitivity (Low Byte), HW Flags (High Byte)|
|Reg Adr 13|40050|Number of dirty channels|
|Reg Adr 14|40051|time of service 1/2|
|Reg Adr 15|40052|time of service 2/2|



P/N 217589 Rev. D 

www.bannerengineering.com - Tel: + 1 888 373 6767 

2 

S15C Modbus Master to IO-Link Device Converter for EZ-ARRAY 

## RegSet 2 

Register Set 2 reads the following Modbus Registers with higher channel beam states specific to arrays 1500 mm and greater: 

|RegSet 2|RegSet 2|RegSet 2|
|---|---|---|
|Reg Adr 01|30018|Channel 241-256|
|Reg Adr 02|30019|Channel 257-272|
|Reg Adr 03|30020|Channel 273-288|
|Reg Adr 04|30021|Channel 289-304 (1500 mm = 300/38 bytes, 19 registers)|
|Reg Adr 05|30022|Channel 305-320|
|Reg Adr 06|30023|Channel 321-336|
|Reg Adr 07|30024|Channel 337-352|
|Reg Adr 08|30025|Channel 353-360|
|Reg Adr 09|30026|Channel 369-384 (1800 mm = 360/46 bytes, 23 registers)|
|Reg Adr 10|30027|Channel 385-400|
|Reg Adr 11|30028|Channel 401-416|
|Reg Adr 12|30029|Channel 417-432 (2100 mm = 420/54 bytes, 27 registers)|
|Reg Adr 13|30030|Channel 433-448|
|Reg Adr 14|30031|Channel 449-464|
|Reg Adr 15|30032|Channel 465-480 (2400 mm = 480/60 bytes, 30 registers)|



## Status Indicators 

Power LED Indicator (Green) 

- Solid Green = Power On 

- Off = Power Off 

IO-Link Communication LED Indicator (Amber) 

- Flashing Amber (900 ms On, 100 ms Off) = IO-Link communications are active 

- Off = IO-Link communications are not present 

Modbus Communication LED Indicator (Amber) 

- Flashing Amber (4 Hz) = Modbus communications are active 

- Solid Amber for 2 seconds to Off = Modbus communications are lost after connection 

- Solid Amber for 2 seconds to Flashing Amber (4 Hz) = Modbus communications momentarily lost, but communication reestablished 

- Solid Amber = Modbus communications are intermittent, or communications error occurs more frequently than once every 2 seconds 

- Off = Modbus communications are not present 

P/N 217589 Rev. D 

www.bannerengineering.com - Tel: + 1 888 373 6767 

3 

S15C Modbus Master to IO-Link Device Converter for EZ-ARRAY 

## Specifications 

Supply Voltage 18 V DC to 30 V DC at 50 mA maximum Supply Protection Circuitry Protected against reverse polarity and transient voltages Leakage Current Immunity 400 µA Indicators Green power Amber IO-Link communications Amber ModBus communications Connections Integral male/female 4-pin M12/Euro-style quick disconnect Construction Coupling Material: Nickel-plated brass Connector Body: PVC translucent black Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine wave) 

Certifcations 

|Environmental Rating<br>IEC IP65, IEC IP67, IEC IP68<br>NEMA/UL Type 1<br>Operating Conditions<br>Temperature:–40 °C to +70 °C (–40 °F to +158 °F)<br>90% at +70 °C maximum relative humidity (non-condensing)<br>Storage Temperature:–40 °C to +80 °C (–40 °F to +176 °F)<br>Required Overcurrent Protection<br>WARNING:Electrical connections must be<br>made by qualifed personnel in accordance with<br>local and national electrical codes and<br>regulations.<br>Overcurrent protection is required to be provided by end product<br>application per the supplied table.<br>Overcurrent protection may be provided with external fusing or via Current<br>Limiting, Class 2 Power Supply.<br>Supply wiring leads < 24 AWG shall not be spliced.<br>For additional product support, go towww.bannerengineering.com.<br>Supply Wiring (AWG)<br>Required Overcurrent Protection (Amps)<br>20<br>5.0<br>22<br>3.0<br>24<br>2.0<br>26<br>1.0<br>28<br>0.8<br>30<br>0.5|Environmental Rating<br>IEC IP65, IEC IP67, IEC IP68<br>NEMA/UL Type 1<br>Operating Conditions<br>Temperature:–40 °C to +70 °C (–40 °F to +158 °F)<br>90% at +70 °C maximum relative humidity (non-condensing)<br>Storage Temperature:–40 °C to +80 °C (–40 °F to +176 °F)<br>Required Overcurrent Protection<br>WARNING:Electrical connections must be<br>made by qualifed personnel in accordance with<br>local and national electrical codes and<br>regulations.<br>Overcurrent protection is required to be provided by end product<br>application per the supplied table.<br>Overcurrent protection may be provided with external fusing or via Current<br>Limiting, Class 2 Power Supply.<br>Supply wiring leads < 24 AWG shall not be spliced.<br>For additional product support, go towww.bannerengineering.com.<br>Supply Wiring (AWG)<br>Required Overcurrent Protection (Amps)<br>20<br>5.0<br>22<br>3.0<br>24<br>2.0<br>26<br>1.0<br>28<br>0.8<br>30<br>0.5|Environmental Rating<br>IEC IP65, IEC IP67, IEC IP68<br>NEMA/UL Type 1<br>Operating Conditions<br>Temperature:–40 °C to +70 °C (–40 °F to +158 °F)<br>90% at +70 °C maximum relative humidity (non-condensing)<br>Storage Temperature:–40 °C to +80 °C (–40 °F to +176 °F)<br>Required Overcurrent Protection<br>WARNING:Electrical connections must be<br>made by qualifed personnel in accordance with<br>local and national electrical codes and<br>regulations.<br>Overcurrent protection is required to be provided by end product<br>application per the supplied table.<br>Overcurrent protection may be provided with external fusing or via Current<br>Limiting, Class 2 Power Supply.<br>Supply wiring leads < 24 AWG shall not be spliced.<br>For additional product support, go towww.bannerengineering.com.<br>Supply Wiring (AWG)<br>Required Overcurrent Protection (Amps)<br>20<br>5.0<br>22<br>3.0<br>24<br>2.0<br>26<br>1.0<br>28<br>0.8<br>30<br>0.5|
|---|---|---|
||Supply Wiring (AWG)|Required Overcurrent Protection (Amps)|
||20|5.0|
||22|3.0|
||24|2.0|
||26|1.0|
||28|0.8|
||30|0.5|



## Dimensions 

All measurements are listed in millimeters [inches], unless noted otherwise. 

**==> picture [415 x 111] intentionally omitted <==**

**----- Start of picture text -----**<br>
57.8<br>[2.27]<br>27.9<br>[1.1]<br>15.0<br>[0.59]<br>M12 X 1  - 6H<br>M12 X 1  - 6g<br>**----- End of picture text -----**<br>


P/N 217589 Rev. D 

www.bannerengineering.com - Tel: + 1 888 373 6767 

4 

S15C Modbus Master to IO-Link Device Converter for EZ-ARRAY 

## Accessories 

## Cordsets 

|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|4-Pin Threaded M12/Euro-Style Cordsets—Double Ended|||
|---|---|---|---|---|---|
|Model|Length|Style|Dimensio|ns|Pinout|
|MQDEC-401SS|0.31 m (1 ft)|Male Straight/<br>Female Straight|40 Typ.<br>[1.58"]<br>ø 14.5 [0.57"]<br>M12 x 1<br>44 Typ.<br>[1.73"]<br>ø 14.5 [0.57"]<br>M12 x 1||Female<br>**2**<br>**3**<br>**4**<br>**1**<br>Male<br>**1**<br>**4**<br>**3**<br>**2**<br>1 = Brown<br>2 = White<br>3 = Blue<br>4 = Black|
|MQDEC-403SS|0.91 m (2.99 ft)|||||
|MQDEC-406SS|1.83 m (6 ft)|||||
|MQDEC-412SS|3.66 m (12 ft)|||||
|MQDEC-420SS|6.10 m (20 ft)|||||
|MQDEC-430SS|9.14 m (30.2 ft)|||||
|MQDEC-450SS|15.2 m (49.9 ft)|||||



## Banner Engineering Corp. Limited Warranty 

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. 

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. 

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. 

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. 

For patent information, see www.bannerengineering.com/patents. 

## FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) 

This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: 

1. This device may not cause harmful interference, and 

2. This device must accept any interference received, including interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

- Consult the manufacturer. 

© Banner Engineering Corp. All rights reserved