RPMD30-4812DEW

• Class B EMC Filter built-in Features • Reverse Polarity Protected • Inrush Current Limiting (Soft Start) Regulated • Output Trim Potentiometer • Output LED Indicator Converters • DIN Rail Mounting or Panel Mount Options ee Description The Recom Power Module takes a standard 15W-60W converter and mounts it on a PCB with screw terminals, an EMC filter, input protection circuitry and a built-in heatsink to offer a complete power module that can be mounted on a bulkhead or on a standard DIN rail. The Power Module is primarily designed for transport applications such as a GPS vehicle tracking power supply or a radio communications power supply, but will also find many uses in industrial, communications or battery-powered applications. 

## **DC/DC Converter Power Module** 

## **Power Modules** 

**==> picture [137 x 90] intentionally omitted <==**

**----- Start of picture text -----**<br>
15-60 Watt<br>3<br>Single,<br>Dual & Triple<br>Outputs<br>r<br>E<br>r a<br>Y A<br>wa nt<br>R<br>y<br>3<br>**----- End of picture text -----**<br>


## How to use this datasheet: 

1. Select the converter that suits your application from the converter series list below 2. Decide on DIN Mount (RPMD) or bulkhead (RPM) version 

Ordering example: 40W, 18-75 VDC in, single 12Vout, DIN Mount = RPMD40-4812SGW 

xx = Output Voltage Options Single Outputs: 3.3S = 3.3V 05S = 5V 12S = 12V 15S = 15V Dual Outputs: 12D = ±12V 15D = ±15V Refer to converter series datasheets for detailed information. 

|Selection GuideSingle and Dual Outputs - Panel Mount Version|||
|---|---|---|
|Power Module<br>Input<br>Output|Internal|Converter|
|Part Number<br>Range<br>Power|Fuse|Series|
|(Bulkhead Version)<br>[VDC]<br>[W]|(Replaceable)||
|RPM15-24xxS_DFW( 1,2)<br>9.5-36<br>15<br>RPM15-48xxS_DFW(1,2)<br>18-75<br>15|T6A<br>T4A|RP15-24xxS_DFW<br>RP15-48xxS_DFW|
|RPM20-24xxS_DFW(1,2)<br>9.5-36<br>20<br>T6A<br>RP20-24xxS_DFW<br>RPM20-48xxS_DFW(1,2)<br>18-75<br>20<br>T4A<br>RP20-48xxS_DFW<br>RPM30-12xxS_DE(2)<br>9.5-18<br>30<br>T6A<br>RP30-12xxS_DE<br>RPM30-24xxS_DE(2)<br>18-36<br>30<br>T6A<br>RP30-24xxS_DE<br>RPM30-24xxS_DEW(1,2)<br>10-40<br>30<br>T6A<br>RP30-24xxS_DEW<br>~~Te~~<br>~~CO~~<br>~~OE~~<br>~~Fe~~|||
|RPM30-48xxS_DE(2)<br>36-75<br>30<br>RPM30-48xxS_DEW(1,2)<br>18-75<br>30<br>RPM40-12xxS_DG(2)<br>9.5-18<br>40|T4A<br>T4A<br>T8A|RP30-48xxS_DE<br>RP30-48xxS_DEW<br>RP40-12xxS_DG|
|RPM40-24xxS_DG(2)<br>18-36<br>40<br>T8A<br>RP40-24xxS_DG<br>RPM40-24xxS_DGW(1,2)<br>9.5-36<br>40<br>T8A<br>RP40-24xxS_DGW<br>RPM40-48xxS_DG(2)<br>36-75<br>40<br>T4A<br>RP40-48xxS_DG<br>~~TE~~|||
|RPM40-48xxS_DGW(1,2)<br>18-75<br>40|T4A|RP40-48xxS_DGW|
|RPM60-24xxSG(1,2)<br>18-36<br>60|T8A|RP60-24xxSG|
|RPM60-48xxSG(1,2)<br>36-75<br>60|T4A|RP60-48xxSG|



IEC60950-1 Certified EN60950-1 Certified 

Notes: 

Note1:   add „/N“ for Negative CTRL Logic 

Note2:  no suffix for Positive CTRL Logic 

REV.:  1/2016 

**PD-1** 

www.recom-power.com 

## **DC/DC Converter** 

## **Power Module Series** 

|Selection GuideSingle and Dual Outputs - DIN Rail Version<br>~~LT~~|Selection GuideSingle and Dual Outputs - DIN Rail Version<br>~~LT~~|Selection GuideSingle and Dual Outputs - DIN Rail Version<br>~~LT~~|Selection GuideSingle and Dual Outputs - DIN Rail Version<br>~~LT~~|Selection GuideSingle and Dual Outputs - DIN Rail Version<br>~~LT~~|
|---|---|---|---|---|
|Power Module|Input|Output|Internal|Converter|
|Part Number|Range|Power|Fuse|Series|
|(DIN rail Version)|[VDC]|[W]|(Replaceable)||
|RPMD15-24xxS_DFW(1,2)|9.5-36|15|T6A|RP15-24xxS_DFW|
|RPMD15-48xxS_DFW(1,2)|18-75|15|T4A|RP15-48xxS_DFW|
|RPMD20-24xxS_DFW(1,2)|9.5-36|20|T6A|RP20-24xxS_DFW|
|RPMD20-48xxS_DFW(1,2)|18-75|20|T4A|RP20-48xxS_DFW|
|RPMD30-12xxS_DE(2)|9.5-18|30|T6A|RP30-12xxS_DE|
|RPMD30-24xxS_DE(2)|18-36|30|T6A|RP30-24xxS_DE|
|RPMD30-48xxS_DE(2)|36-75|30|T4A|RP30-48xxS_DE|
|RPMD30-24xxS_DEW(1,2)|10-40|30|T6A|RP30-24xxS_DEW|
|RPMD30-48xxS_DEW(1,2)|18-75|30|T4A|RP30-48xxS_DEW|
|RPMD40-12xxS_DG(2)|9.5-18|40|T8A|RP40-12xxS_DG|
|RPMD40-24xxS_DG(2)|18-36|40|T8A|RP40-24xxS_DG|
|RPMD40-24xxS_DGW(1,2)|9.5-36|40|T8A|RP40-24xxS_DGW|
|RPMD40-48xxS_DG(2)|36-75|40|T4A|RP40-48xxS_DG|
|RPMD40-48xxS_DGW(1,2)|18-75|40|T4A|RP40-48xxS_DGW|
|RPMD60-24xxSG(1,2)|18-36|60|T8A|RP60-24xxSG|
|RPMD60-48xxSG(1,2)|36-75|60|T4A|RP60-48xxSG|



Notes: 

Note1:   add „/N“ for Negative CTRL Logic Note2:  no suffix for Positive CTRL Logic 

|Selection GuideTriple Outputs - Panel Mount Version<br>~~LT~~|Selection GuideTriple Outputs - Panel Mount Version<br>~~LT~~|Selection GuideTriple Outputs - Panel Mount Version<br>~~LT~~|Selection GuideTriple Outputs - Panel Mount Version<br>~~LT~~|Selection GuideTriple Outputs - Panel Mount Version<br>~~LT~~|
|---|---|---|---|---|
|Power Module|Input|Output|Internal|Converter|
|Part Number|Range|Power|Fuse|Series|
|(Bulkhead Version)|[VDC]|[W]|(Replaceable)||
|RPM40-120512TG(2)|9.5-18|40|T8A|RP40-120512TG|
|RPM40-120515TG(2)|9.5-18|40|T8A|RP40-120515TG|
|RPM40-240512TG(2)|18-36|40|T8A|RP40-240512TG|
|RPM40-240515TG(2)|18-36|40|T8A|RP40-240515TG|
|RPM40-480512TG(2)|36-75|40|T4A|RP40-480512TG|
|RPM40-480515TG(2)|36-75|40|T4A|RP40-480515TG|



Notes: Note2:  no suffix for Positive CTRL Logic 

## Selection Guide Triple Outputs - DIN Rail Version 

|Power Module|Input|Output|Internal|Converter|
|---|---|---|---|---|
|Part Number|Range|Power|Fuse|Series|
|(Bulkhead Version)|[VDC]|[W]|(Replaceable)||
|RPMD40-120512TG(2)|9.5-18|40|T8A|RP40-120512TG|
|RPMD40-120515TG(2)|9.5-18|40|T8A|RP40-120515TG|
|RPMD40-240512TG(2)|18-36|40|T8A|RP40-240512TG|
|RPMD40-240515TG(2)|18-36|40|T8A|RP40-240515TG|
|RPMD40-480512TG(2)|36-75|40|T4A|RP40-480512TG|
|RPMD40-480515TG(2)|36-75|40|T4A|RP40-480515TG|



## Notes: 

Note2:  no suffix for Positive CTRL Logic 

REV.:  1/2016 

**PD-2** 

www.recom-power.com 

**DC/DC Converter** 

~~LT~~ Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted 

## **Power Module Series** 

Specificatins are as in individual converter datasheets with the following exceptions: 

## Bulkhead Version 

## BASIC CHARACTERISTICS 

Parameter Condition Min. Typ. Max. Inrush current nominal Vin and full load soft start Power up 100ms Start-up time CTRL Pin 20ms ENVIRONMENTAL Parameter Condition Value Thermal Impedance 8.5°C/Watt SAFETY AND CERTIFICATIONS IEC General Safety IEC60950-1, 2nd Edition, 2005 + A1:2009 LVD20110124 EN General Safety EN60950-1:2006 + A11:2009 +A1:2010; EMC Compliance Condition Standard / Criterion EMI Standard EN55022, Class B ESD EN61000-4-2, Criteria A Radiated Immunity EN61000-4-3, Criteria A Fast Transient EN61000-4-4, Criteria A Surge EN61000-4-5, Criteria A Conducted Immunity EN61000-4-6, Criteria A DIMENSIONS and PHYSICAL CHARACTERISTICS ~~ee~~ Parameter Type Value Material Chassis Aluminium ~~eC~~ Package Dimensions (LxWxH) 101.6 x 57.15 x 19.0mm ~~SEE~~ Package Weight 134g Connectors Screw Terminal ~~ee~~ Panel Mount Version (mm) ~~ey~~ OE ~~(~~ a ~~7~~ p 57.15 ~~o~~ Pin Connections ~~a~~ Fuse Pin # Single Dual CMC 1 +Vin +Vin 2 -Vin -Vin Heat-sink Plate 3 CTRL CTRL 4 NC NC ~~1~~ F FET ~~**—** — i~~ S ~~:~~ 5 -Vout -Vout 6 +Vout Com LED Trim[(3)] 7 NC +Vout ~~en~~ e ~~® a~~ NC: No Connection Mounting Centres 92.1 Tolerance: X.X ±0.25mm 101.6 ~~a~~ 

## Notes: 

Note3: Trim option depending on converter series, please check datasheet of the converter series 

REV.:  1/2016 

**PD-3** 

www.recom-power.com 

## **DC/DC Converter** 

## **Power Module Series** 

## Selection Guide typical at nominal input and 25°C unless otherwise noted 

Specificatins are as in individual converter datasheets with the following exceptions: 

PACKAGING INFORMATION Parameter Type Value Packaging Dimensions Cardboard Box 146 x 75 x 29mm Packaging Quantity 1pc DIN-Rail Version BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Inrush current nominal Vin and full load 15A Power up 100ms Start-up time CTRL Pin 20ms ~~===~~ ENVIRONMENTAL Parameter Condition Value ~~_——~~ Thermal Impedance 4.2°C/Watt SAFETY AND CERTIFICATIONS IEC General Safety IEC60950-1, 2nd Edition, 2005 + A1:2009 LVD20110124 EN General Safety EN60950-1:2006 + A11:2009 +A1:2010; EMC Compliance Condition Standard / Criterion EMI Standard EN55022, Class B ESD EN61000-4-2, Criteria A Radiated Immunity EN61000-4-3, Criteria A Fast Transient EN61000-4-4, Criteria A Surge EN61000-4-5, Criteria A Conducted Immunity EN61000-4-6, Criteria A ~~———~~ DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Typeypee Value Material Chassis Aluminium Package Dimensions (LxWxH)ge Dimensions (LxWxH)e Dimensions (LxWxH)(LxWxH)LxWxH)) 125.0 x 57.6 x 24.5mm Package Weightge Weighte Weightghtht 182gg Connectors Screw Terminal 

DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Typeypee Value Material Chassis Aluminium Package Dimensions (LxWxH)ge Dimensions (LxWxH)e Dimensions (LxWxH)(LxWxH)LxWxH)) 125.0 x 57.6 x 24.5mm Package Weightge Weighte Weightghtht 182gg Connectors Screw Terminal ~~Pp~~ continued on next page **PD-4** REV.:  1/2016 

www.recom-power.com 

## **DC/DC Converter** 

## **Power Module Series** 

**==> picture [497 x 402] intentionally omitted <==**

**----- Start of picture text -----**<br>
Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted<br>DIN Rail Version (mm)<br>125.0<br>116.3<br>5 6 7 8<br>LED<br>Trim [(3)]<br>ta x) 2 _<br>1 2 3 4<br> Pin Connections<br>Pin # Single Dual Triple<br>1 CTRL CTRL CTRL<br>2 -Vin -Vin -Vin<br>3 -Vin -Vin -Vin<br>4 +Vin +Vin +Vin<br>5 NC NC +Aux<br>| coon a00ueee F f<br>6 -Vout -Vout Com<br>7 +Vout Com -Aux<br>8 NC +Vout +Vout<br>Notes: NC: No Connection<br>Note3: Trim option depending on converter series, please check datasheet of the converter series Tolerance: X.X ±0.5mm<br>57.6<br>24.5<br>**----- End of picture text -----**<br>


|PACKAGING INFORMATION|PACKAGING INFORMATION|PACKAGING INFORMATION|
|---|---|---|
|Parameter|Type|Value|
|PackagingDimensions|Cardboard Box|146 x 75 x 29mm|
|PackagingQuantity||1pc|



The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  1/2016 

**PD-5** 

www.recom-power.com