RP1B23D5M1

**Solid State Relays PCB, 1-Phase ZS/IO Types RP1A, RP1B** 

- **•AC Solid State Relay for PCB mounting •Zero switching or instant-on** 

**•Rated operational current: 3, 5 or 5.5 AACrms** 

- **•Rated operational voltage: Up to 480 VACrms** 

- **•Surface mount technology** 

- **•Flexible encapsulation for extended life** 

**•Control voltage: 3 to 32 VDC* / 16 to 32 VAC**** 

- **•Opto-isolation: > 4000 VACrms** 

- **•Blocking voltage: Up to 1000 V** p 

- **•Non-repetitive surge current: Up to 250 A** p 

**Product Description Ordering Key RP 1 A 23 D 3** The RP1 is an SSR series for tion and automated assembly **Solid State Relay (PCB)** socketor PCB-mounting, of components. Opto-isola- **Number of poles** providing an ideal interface tion and load switching are **Switching mode** between logic controls and performed by individual com- **Rated operational voltage** AC loads. The RP1 is ponents, providing higher reli- **Control voltage** OS designed for resistive and ability than monolithic **Rated operational current** ~~—~~ inductive loads up to designs. Additionally RP1..6 480VACrms. Two regulated is a special version with high control voltage ranges cover current surge capability that most standard input requirereduces fusing requirements. ments in an economic packThis relay can also drive highage. These features allow a er AC53a loads up to 5 A. direct substitution of existing The Solid State technology PCB mounted relays with used can withstand peak voltRP1. Internally this new series ages of 1000V, making the enjoys an improved technical RP1 series suitable to drive design with the introduction of AC loads such as valve stress-free flexible encapsulasolenoids and small induction motors. 

## **T e Selection yp** 

|**Type Selection**<br>stress-free flexible encapsula-|encapsula-<br>solenoids and small induction<br>motors.|||
|---|---|---|---|
|**Switching mode**|**Rated operational voltage**|**Rated operational current**|**Control voltage**|
|A: Zero switching|23: 230 VACrms|3: 3 AACrms|D: 3 to 32 VDC*|
|B: Instant-On switching|40: 400 VACrms|5: 5 AACrms|A: 16 to 32 VAC**|
||48: 480 VACrms|6: 5.5 AACrms|* 4 to 32 VDC for RP1A48..|
||||4 to 32 VDC for RP1B40.. and RP1B48..|
|**SelectionGuide**|||** Only available for 230V, 5.5 A|



## **Selection Guide** 

|**Rated operational**|**Non-rep. voltage**|**Control voltage**|**Rated operational current**|**Rated operational current**||
|---|---|---|---|---|---|
|**voltage**|||**3 AACrms**|**5 AACrms**|**5.5 AACrms**|
|230 VACrms|650 Vp|3 to 32 VDC|**RP1A23D3**|**RP1A23D5**|**RP1A23D6**|
||||**RP1B23D3**|**RP1B23D5**|**RP1B23D6**|
|||16 to 32 VAC|-|-|**RP1A23A6**|
|400 VACrms|850 Vp|3 to 32 VDC|**RP1A40D3**|**RP1A40D5**|**RP1A40D6**|
|||4 to 32 VDC|**RP1B40D3**|**RP1B40D5**|**RP1B40D6**|
|480 VACrms|1000 Vp|4 to 32 VDC|**RP1A48D3**|**RP1A48D5**|**RP1A48D6**|
||||**RP1B48D3**|**RP1B48D5**|**RP1B48D6**|



## **Selection Guide (mounted on DIN EN adaptor)** 

|**Selection Guide**|**Guide (mountedmounted **|**on DIN EN adaptor)**|**RP1B48D3**<br>**adaptor)ptor)tor))**|**RP1B48D5**|**RP1B48D6**|
|---|---|---|---|---|---|
|**Rated operational**|**Non-rep. voltage**|**Control voltage**|**Rated operational current**|**Rated operational current**||
|**voltage***|||**3 AACrms**|**5 AACrms**|**5.5 AACrms**|
|230 VACrms|650 Vp|5 to 34 VDC|**RP1A23D3M1**|**RP1A23D5M1**|**RP1A23D6M1**|
||||**RP1B23D3M1**|**RP1B23D5M1**|**RP1B23D6M1**|
|||16 to 32 VAC|**-**|**-**|**RP1A23A6M1****|



* For operational voltages > 230 VACrms add suffix M2 to part no. Refer to RPM2 datasheet. 

** Version RP1A23A6M1 does not include an LED on the DIN adaptor. 

**1** 

Specifications are subject to change without notice (22.02.2016) 

**RP 1** 

## **General S ecifications p** 

||**RP1.23..**||**RP1.40..**||**RP1.48..**|
|---|---|---|---|---|---|
|Operational voltage range||||||
|RP1A...|12 - 265 VACrms||20 - 440 VACrms||20 - 530 VACrms|
|RP1B...|12 - 265 VACrms||12 - 440 VACrms||12 - 530 VACrms|
|Blockingvoltage|650 Vp||850 Vp||1000 Vp|
|Rated insulation input to output|4 kVACrms||4 kVACrms||4 kVACrms|
|Operational frequencyrange|45 - 65 Hz||45 - 65 Hz||45 - 65 Hz|
|Power factor|> 0.5||> 0.5||> 0.5|
|Zero voltage turn-on|< 10 V||< 10 V||< 10 V|
|Approvals|UL,cUL,VDE*||UL,cUL,VDE*||UL,cUL,VDE*|
|CE-marking|Yes||Yes||Yes|



* VDE 0700, VDE 0805 (excluding RP1A23A6) 

## **In ut S ecifications p p** 

|**Input Specifications**<br>* VDE 0700, VDE 0805 (excluding RP1A23A6)||||
|---|---|---|---|
||**RP1...A.**||**RP1A23A6**|
|Control voltage|||16 - 32 VAC|
|RP1.23.. RP1A40..|3-32 VDC||-|
|RP1B40.. RP1.48..|4-32 VDC||-|
|Pick-up voltage|||10 VAC|
|RP1.23.. RP1A40..|2.8 VDC||-|
|RP1B40.. RP1.48..|3.8 VDC||-|
|Drop-out voltage|1.2 VDC||5 VAC|
|Max. input curent|||13 mAAC|
|RP1A...|10 mADC||-|
|RP1B...|15 mADC||-|
|Max. reverse voltage|32 VDC||-|
|Response time pick-up||||
|RP1A...|< 10 ms||-|
|RP1B...<br>12 VDC/ 50 Hz|< 160µs||-|
|5 VDC/ 50 Hz|< 320µs||-|
|Response time drop-out|||< 20 ms|
|RP1A...|< 10 ms||-|
|RP1B...|< 10 ms||-|



## **Out ut S ecifications p p** 

||**RP1....3**||**RP1....5**||**RP1....6**|
|---|---|---|---|---|---|
|Rated operational current||||||
|AC 51 @ Ta= 25ºC|3 A||5 A||5.5 A|
|AC 53a @ Ta = 25ºC|2 A||3 A||5 A|
|Min. operational load current|20 mA||20 mA||20 mA|
|Rep. overload current t=1 s|10 AACrms||12 AACrms||16 AACrms|
|Non-rep. surge current t=20 ms|65 Ap||80 Ap||250 Ap|
|Off-state leakage current|< 1 mA||< 1 mA||< 1 mA|
|I2t for fusingt=10 ms|20 A2s||50 A2s||340 A2s|
|Critical dV/dt off state min.|250 V/µs||500 V/µs||500 V/µs|
|On-state voltage drop||||||
|@ rated current|< 1.2 Vrms||< 1.2 Vrms||< 1.2 Vrms|



## **Thermal S ecifications p** 

|Operatingtemperature|-20° to +70°C(-4° to +158°F)|
|---|---|
|Storage temperature|-40° to +100°C (-40° to +212°F)|



## **Insulation Input - Output** 

|Insulation resistance|1010|
|---|---|
|Insulation capacitance|8 pF|



**2** 

Specifications are subject to change without notice (22.02.2016) 

**RP 1** 

## **Functional Diagram** 

## **A lications pp** 

These relays can be used to switch heaters, motors, lights, valves or solenoids. 

**==> picture [234 x 306] intentionally omitted <==**

**----- Start of picture text -----**<br>
(~)<br>31(~)(+) 13<br>ZC<br>Control IO<br>input<br>I |<br>42(~)(~) 24<br>(-)<br>h- | Po a d |<br>Deratin Curve<br>g<br>6<br>5<br>SLT<br>4<br>3<br>D6<br>D5<br>2<br>[|<br>D3<br>1 PP EE<br>0 PE tt<br>20 30 40 50 60 70<br>Surrounding temp. (˚C)<br>REGULATION<br>Load current (AACrms)<br>**----- End of picture text -----**<br>


## **Deratin Curve g** 

When used at full load current, the relays must be placed vertically. If more than one relay is mounted, please allow a minimum distance of 20 mm in between for sufficient air cooling. 

**Housin S ecifications g p** 

|Weight<br>Approx. 20g<br>Housingmaterial<br>PBT, grey<br>~~re~~<br>~~— ——~~<br>~~hh httitsti‘—SOCSY~~<br>~~re~~|
|---|
|Terminals<br>Copper alloy,tin-plated|
|Terminals solderingtemperature max. 300°C for 5 sec.|
|Potting compound<br>Flame-retardant flexible|
|silicone rubber|



## **Increased Current O tions p** 

|I peak (Amps)<br>D5 : t (minutes)<br>D6 : t (minutes<br>Tamb= 25°C<br>Ipeak<br>Inom<br>~~To~~|6<br>8<br>15<br>5<br>15<br>5<br>t<br>~~To~~|~~To~~|10<br>3<br>3|
|---|---|---|---|



Note: Even though the D3 can withstand a slight increase in current for a limited time, it is not recommended for this purpose. 

Derating curve is used for finding max. load current at an elevated ambient temperature. The 3 lines in the graph represent the 3 nominal current ratings of the RP1 series (RP1...D3/D5/D6). 

## **Dimensions** 

**==> picture [181 x 209] intentionally omitted <==**

**----- Start of picture text -----**<br>
11M M = 1/10” = 2.54 mm<br>9M<br>3M 4M<br>43 *<br>+1 2 +3 4<br>4 x ø1 *** = ± 0.2 mm= ± 0.5 mm<br>10.5 **<br>1M<br>*<br>25.4<br>6 **<br>**----- End of picture text -----**<br>


## **Accessories** 

M1 DIN-rail adaptor (photo) M2 DIN-rail adaptor (for V > 230VAC) Varistors Fuses 

For further information refer to “General Accessories”. 

**3** 

Specifications are subject to change without notice (22.02.2016)