Image not available
Illustrative purposes only
RM1D200D50
SOLID STATE RELAYS
⚠️ Reference pricing provided. In case of supply shortages, we will connect you with our trusted procurement partners to ensure your project's continuity.
- Manufacturer: CARLO GAVAZZI / PARTNER STOCK
- Product type:
- SVHC: No SVHC (25-Jun-2025)
| Delivery and price | |
|---|---|
| Units per pack | 3 |
| Price | 122.59 € |
| Current stock | 10+ |
| Lead time | 30 days |
Datasheet
## **RM1D** ## **RM1D** ## **DC switching solid state relays** ## **Main features** - Low power dissipation output MOSFET - 100 ADC maximum output current up to 60 VDC - 50 ADC maximum output current up to 200 VDC - 10 ADC maximum output current up to 500 VDC - Switching frequency up to 1000 Hz - 4-32 VDC control voltage range - LED for control presence indication - Clip-on IP 20 protection cover - Self-lifting terminals - Housing free of moulding mass ## **Description** The **RM1D** series expands Carlo Gavazzi’s range of DC solid state switching solutions up to 100 A for supply voltages up to 60 VDC, up to 50 A for supply voltages of maximum 200 VDC and up to 10 A for supply voltages of maximum 500 VDC. This new range is suitable for panel mounting or for mounting on a heatsink. The switching of the **RM1D** is controlled by a DC voltage in the range of 4 to 32 V. An LED indicates control voltage presence on the SSR. The **RM1D** is the ideal solution when switching response times, from ON to OFF and vice versa, are critical to the application. Being fully solid state, the **RM1D** is the obvious choice for applications necessitating a high number of switching cycles since the SSR lifetime is not compromised by such switching. Specifications are at a surrounding temperature of 25°C unless otherwise specified. ## **Applications** DC heaters, solenoid valves, test equipment, connection and disconnection of battery sources. ## **Main functions** - DC switching solid state relay with 3750 Vrms isolation between input and output - Fast response times to switch ON and OFF - Fully solid state to ensure trouble free operation over a high number of switching cycles **1** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Order code** ## **RM1D D** **==> picture [483 x 214] intentionally omitted <==** **----- Start of picture text -----**<br> Enter the code option instead of . Refer to selection guide section for valid part numbers.<br>Code Option Description Comments<br>R -<br>M - Solid state relay (RM)<br>1 - 1-pole switching<br>D - DC switching<br>060 Rated output voltage: 60 VDC (1-60 VDC)<br>200 Rated output voltage: 200 VDC (1-200 VDC)<br>500 Rated output voltage: 500 VDC (1-500 VDC)<br>D - Control voltage: 4-32 VDC 4.5-32 VDC for RM1D200.., RM1D500..<br>3 Max. rated current: 3 ADC Available only with RM1D060D..<br>10 Max. rated current (with heatsink): 10 ADC Not available with RM1D200D..<br>20 Max. rated current (with heatsink): 20 ADC Not available with RM1D500D..<br>50 Max. rated current (with heatsink): 50 ADC Not available with RM1D500D..<br>100 Max. rated current (with heatsink): 100 ADC Available only with RM1D060D..<br>HT - Pre- attached thermal pad Option, available on request<br>**----- End of picture text -----**<br> ## **Selection guide** **==> picture [483 x 87] intentionally omitted <==** **----- Start of picture text -----**<br> Rated output Control Maximum rated operational current*<br>voltage voltage 3 ADC 10 ADC 20 ADC 50 ADC 100 ADC<br>1-60 VDC 4-32 VDC RM1D060D3 RM1D060D10 RM1D060D20 RM1D060D50 RM1D060D100<br>1-200 VDC - - RM1D200D20 RM1D200D50 -<br>4.5-32 VDC<br>1-500 VDC - RM1D500D10 - - -<br>**----- End of picture text -----**<br> * Refer to Heatsink selection tables ## **Carlo Gavazzi compatible components** **==> picture [483 x 18] intentionally omitted <==** **----- Start of picture text -----**<br> Purpose Component name/code Notes<br>**----- End of picture text -----**<br> |**Purpose**|**Component name/code**|**Notes**| |---|---|---| |||| |Heatsinks|RHS|Heatsinks and fans| |Screws kits for SSR mounting|SRWKITM5X10MM|Packing qty.: 20pcs.| |Fork terminals|RM635KP|Packing qty.: 10pcs.| |Touchprotection covers|RMIP20|Packing qty.: 10pcs.| |Thermalpads|KK071CUT|Packing qty.: 50pcs.| ## **Further reading** **==> picture [483 x 17] intentionally omitted <==** **----- Start of picture text -----**<br> Information Where to find it<br>**----- End of picture text -----**<br> |**Information**|**Where to fnd it**| |---|---| ||| |Heatinsk selector tool(online)|https://www.gavazziautomation.com/nsc/HQ/EN/heat_sink_selector_tool| |Output protection calculator tool<br>(online)*|http://gavazziautomation.com/images/PIM/OTHERSTUFF/SOFTWARE/RM1D-<br>Output%20protection%20calculator.zip| * Further details can be found in the Connection diagrams section on page 18 **2** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Structure** **==> picture [134 x 305] intentionally omitted <==** **----- Start of picture text -----**<br> 2- 1+<br>4/A2- LED 3/A1+<br>**----- End of picture text -----**<br> **==> picture [483 x 85] intentionally omitted <==** **----- Start of picture text -----**<br> Element Component Function<br>1+ Power connection Load connection or positive supply connection<br>2- Power connection Load connection or ground supply connection<br>3/A1+ Control connection Control supply signal<br>4/A2- Control connection Ground connection for control<br>LED Control indication Indicates presence of control voltage<br>**----- End of picture text -----**<br> **3** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Features** ## **General data** |**Housing material**<br>|Noryl, black| |---|---| |**Mounting**<br>|Panel mount| |**Touch protection**<br>|IP20| |**Isolation**<br> <br>|Input and output to case: 3750 Vrms<br>Input to output: 3750 Vrms| |**Weight**<br>|approx. 83 g| |**LED indication**<br>|Continuously ON green LED when control input is applied| ## **Dimensions** **Fig. 1** _RM1D dimensions_ Dimensions in mm unless otherwise noted **4** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Performance** **==> picture [483 x 359] intentionally omitted <==** **----- Start of picture text -----**<br> Outputs<br>RM1D060..<br>Max. operational current:<br>3 ADC 10 ADC 20 ADC 50 ADC 100 ADC<br>DC 1 rating<br>Absolute max. output voltage 60 VDC<br>Operational voltage range, Ue 1-60 VDC<br>Output protection Integrated transil<br>Leakage current @ rated voltage 0.1 mADC<br>Minimum operational current 20 mADC 5 mADC<br>Repetitive overload current<br>UL508: TAMB=40˚C, tON=1 s, 4.5 ADC 15 ADC 30 ADC 75 ADC 150 ADC<br>tOFF=9 s, 50 cycles<br>RM1D200.. RM1D500..<br>Max. operational current:<br>20 ADC 50 ADC 10 ADC<br>DC 1 rating<br>Absolute max. output voltage 200 VDC 500 VDC<br>Operational voltage range, Ue 1-200 VDC 1-200 VDC (150 VDC*) 1-500 VDC<br>Output protection Integrated transil<br>Leakage current @ rated voltage 0.1 mADC<br>Minimum operational current 5 mADC<br>Repetitive overload current<br>UL508: TAMB=40˚C, tON=1 s, 30 ADC 75 ADC 15 ADC<br>tOFF=9 s, 50 cycles<br>**----- End of picture text -----**<br> * Please refer to note found in the Connection diagrams section **==> picture [483 x 192] intentionally omitted <==** **----- Start of picture text -----**<br> Inputs<br>RM1D200..,<br>RM1D060..<br>RM1D500..<br>Control voltage range 4-32 VDC 4.5-32 VDC<br>Pick-up voltage [1] 4 VDC 4.5 VDC<br>Drop-out voltage 1.2 VDC<br>Maximum reverse voltage 32 VDC<br>Maximum switching frequency [2] 1000 Hz<br>Response time pickup<br>@ Vout = 24 VDC, ton3 ≤100 μs<br>Response time drop-out, toff3 ≤100 μs ≤150 μs<br>Input current @ 40°C <16 mADC<br>**----- End of picture text -----**<br> **5** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Inputs (continued)** **==> picture [477 x 185] intentionally omitted <==** **----- Start of picture text -----**<br> TURN-ON TURN-OFF<br>CONTROL CONTROL<br>18<br>16<br>14<br>12<br>t t 10<br>OUTPUT OUTPUT 8<br>VOLTAGE VOLTAGE<br>ACROSS ACROSS 6<br>SSR SSR 4<br>2<br>0<br>4 8 12 16 20 24 28 32<br>Input voltage (VDC)<br>t t<br>ton toff<br>Fig. 2 Response time characteristics Fig. 3 Input voltage vs. input current curve<br>Input current (mADC)<br>**----- End of picture text -----**<br> - 1: Pick-up voltage increases to 5.5 VDC at operating temperatures lower than -20°C - 2: Output current has to be derated at high switching frequencies. Refer to the Current derating vs. switching frequency section - 3: Response times will be longer for lower output voltages (<24 VDC) ## **Current derating vs switching frequency** ## **RM1D060D..** **==> picture [435 x 213] intentionally omitted <==** **----- Start of picture text -----**<br> 1.1 In<br>1.0 In<br>0.9 In<br>50% duty cycle<br>0.8 In<br>90% duty cycle<br>0.7 In<br>0.6 In<br>0.5 In<br>0 100 200 300 400 500 600 700 800 900 1000<br>Switching frequency (Hz)<br>)C<br>D<br>A<br>(<br>I tn<br>n<br>e<br>rr<br>u<br>c<br>d<br>a<br>o<br>L<br>**----- End of picture text -----**<br> **Fig. 4** _Current derating vs. switching frequency_ **6** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Current derating vs switching frequency (continued)** ## **RM1D200D..** **==> picture [418 x 213] intentionally omitted <==** **----- Start of picture text -----**<br> 1.1 In<br>1.0 In<br>0.9 In<br>0.8 In 50% duty cycle<br>90% duty cycle<br>0.7 In<br>0.6 In<br>0.5 In<br>0.4 In<br>0 100 200 300 400 500 600 700 800 900 1000<br>Switching frequency (Hz)<br>)C<br>D<br>A<br>(<br>I tn<br>n<br>e<br>rr<br>u<br>c<br>d<br>a<br>o<br>L<br>**----- End of picture text -----**<br> **Fig. 5** _Current derating vs. switching frequency[4]_ ## **RM1D500D..** **==> picture [458 x 214] intentionally omitted <==** **----- Start of picture text -----**<br> 1.1 In<br>1.0 In<br>0.9 In<br>0.8 In<br>0.7 In 50% duty cycle<br>0.6 In 90% duty cycle<br>0.5 In<br>0.4 In<br>0.3 In<br>0.2 In<br>0 100 200 300 400 500 600 700 800 900 1000<br>Switching frequency (Hz)<br>)C<br>D<br>A<br>(<br>I tn<br>n<br>e<br>rr<br>u<br>c<br>d<br>a<br>o<br>L<br>**----- End of picture text -----**<br> **Fig. 6** _Current derating vs. switching frequency[4]_ 4. At 90% duty cycle, the switching frequency for the RM1D200D.. and RM1D500D.. is limited to 700 Hz. This limitation is related to the response time drop out of 150 µs for these models. For example: - OFF time at a switching frequency of 800Hz with 90% duty cycle is 125 µs, that is lower than the time needed for the SSR to switch OFF (150 µs) so the SSR output would not switch OFF - OFF time at a switching frequency of 600Hz with 90% duty cycle is 167 µs which is greater than the time needed for the SSR to switch OFF (150 µs) **7** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Output power dissipation** **==> picture [470 x 202] intentionally omitted <==** **----- Start of picture text -----**<br> 10<br>9<br>8<br>7<br>6<br>RM1D060D3<br>5<br>RM1D060D10<br>4 RM1D060D20<br>3<br>2<br>1<br>0<br>0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20<br>Load current (ADC)<br>Power dissipa�on (W)<br>**----- End of picture text -----**<br> **Fig. 7** _Output power dissipation graph_ **==> picture [462 x 229] intentionally omitted <==** **----- Start of picture text -----**<br> 60<br>50<br>40<br>RM1D060D50<br>30<br>RM1D060D100<br>20<br>10<br>0<br>0 10 20 30 40 50 60 70 80 90 100<br>Load current (ADC)<br>Power dissipa�on (W)<br>**----- End of picture text -----**<br> **Fig. 8** _Output power dissipation graph_ **8** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Output power dissipation (continued)** **==> picture [477 x 255] intentionally omitted <==** **----- Start of picture text -----**<br> 100<br>90<br>80<br>70<br>60<br>50 RM1D500D10<br>RM1D200D20<br>40<br>RM1D200D50<br>30<br>20<br>10<br>0<br>0 5 10 15 20 25 30 35 40 45 50<br>Load current (ADC)<br>Power dissipa�on (W)<br>**----- End of picture text -----**<br> **Fig. 9** _Output power dissipation graph_ **9** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Heatsink selection** Note: The heatsink selection in tables below is valid only when a fine layer of silicon based thermal paste (with a similar thermal resistance to that specified for Rthcs in the Thermal data section) is utilised. The SSR will overheat if this heatsink selection is used for heatsink assemblies using a thermal interface material having a higher Rthcs than indicated in the Thermal data section. ## Thermal resistance [°C/W] of RM1D060D3, RM1D060D10, RM1D060D20 **==> picture [483 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>20 nh 14.0 9.7 6.4 3.8 1.8 -<br>18 nh nh 14.0 8.9 5.2 2.5 0.25<br>16 nh nh nh 13.3 7.5 3.5 0.51<br>14 nh nh nh nh 11.4 5.1 0.92<br>12 nh nh nh nh nh 8.0 1.6<br>10 nh nh nh nh nh 14.3 2.7<br>8 nh nh nh nh nh nh 5.0<br>6 nh nh nh nh nh nh 11.5<br>4 nh nh nh nh nh nh nh<br>2 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Thermal resistance [°C/W] of RM1D060D50 **==> picture [483 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>50 4.3 3.3 2.4 1.6 0.9 0.22 -<br>45 6.0 4.6 3.4 2.3 1.3 0.47 -<br>40 8.8 6.7 4.9 3.3 2.0 0.82 -<br>35 14.3 10.3 7.4 5.0 3.0 1.3 -<br>30 nh 18.7 12.3 8.0 4.7 2.2 0.18<br>25 nh nh nh 14.8 8.2 3.8 0.59<br>20 nh nh nh nh 17.5 7.2 1.4<br>15 nh nh nh nh nh 18.5 3.2<br>10 nh nh nh nh nh nh 10.3<br>5 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Note: 'nh' means no heatsink necessary. The SSR should still be tightened to a surface to ensure optimal thermal dissipation. **10** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Heatsink selection (continued)** Thermal resistance [°C/W] of RM1D060D100 **==> picture [483 x 177] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>100 1.8 1.4 1.1 0.73 0.4 - -<br>90 2.4 1.9 1.5 1.0 0.6 0.21 -<br>80 3.3 2.7 2.0 1.4 0.88 0.37 -<br>70 4.8 3.8 2.9 2.1 1.3 0.61 -<br>60 7.6 5.9 4.4 3.1 2.0 0.98 -<br>50 14.0 10.2 7.4 5.1 3.2 1.6 0.27<br>40 nh nh 15.5 9.9 5.9 2.9 0.64<br>30 nh nh nh nh 14.2 6.3 1.5<br>20 nh nh nh nh nh nh 4.2<br>10 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Thermal resistance [°C/W] of RM1D200D20 **==> picture [483 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>20 3.4 2.8 2.2 1.7 1.2 0.71 0.27<br>18 4.8 3.9 3.1 2.4 1.7 1.1 0.53<br>16 7.1 5.7 4.5 3.4 2.5 1.7 0.91<br>14 11.5 9.0 6.9 5.2 3.8 2.6 1.5<br>12 nh 16.1 11.7 8.5 6.1 4.1 2.4<br>10 nh nh nh 16.3 10.6 6.7 3.9<br>8 nh nh nh nh nh 13.5 7.0<br>6 nh nh nh nh nh nh 17.5<br>4 nh nh nh nh nh nh nh<br>2 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Thermal resistance [°C/W] of RM1D200D50 **==> picture [483 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>50 1.1 1.0 0.79 0.60 0.42 0.24 -<br>45 1.6 1.4 1.1 0.86 0.62 0.39 0.17<br>40 2.3 1.9 1.6 1.2 0.92 0.62 0.33<br>35 3.4 2.8 2.3 1.8 1.4 1.0 0.55<br>30 5.3 4.4 3.5 2.8 2.1 1.5 0.92<br>25 9.3 7.5 5.9 4.6 3.4 2.4 1.5<br>20 nh 16.5 11.9 8.7 6.2 4.2 2.5<br>15 nh nh nh nh 15.6 9.2 5.1<br>10 nh nh nh nh nh nh 17.5<br>5 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Note: 'nh' means no heatsink necessary. The SSR should still be tightened to a surface to ensure optimal thermal dissipation. **11** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Heatsink selection (continued)** Thermal resistance [°C/W] of RM1D500D10 **==> picture [483 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>10 10.7 8.3 6.4 4.7 3.3 2.2 1.1<br>9 17.0 12.6 9.4 6.8 4.8 3.1 1.7<br>8 nh nh 14.8 10.4 7.2 4.6 2.6<br>7 nh nh nh 17.3 11.1 7.0 4.1<br>6 nh nh nh nh nh 11.3 6.1<br>5 nh nh nh nh nh nh 10.2<br>4 nh nh nh nh nh nh nh<br>3 nh nh nh nh nh nh nh<br>2 nh nh nh nh nh nh nh<br>1 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Note: 'nh' means no heatsink necessary. The SSR should still be tightened to a surface to ensure optimal thermal dissipation. ## **Heatsink selection for variants with pre-attached thermal pad** Note: The heatsink selection in tables below is valid for the models having a pre-attached thermal interface (RM1D..HT). The thermal resistance Rthcs_HT of the interface used is noted in the Thermal data section (ref. KK071CUT). In case of replacements, a thermal interface pad having the same or lower thermal resistance shall be utilised to prevent SSR from overheating. Thermal resistance [°C/W] of RM1D060D3HT, RM1D060D10HT, RM1D060D20HT **==> picture [483 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>20 nh 13.7 9.3 6.0 3.5 1.4 -<br>18 nh nh 13.7 8.6 4.9 2.1 -<br>16 nh nh nh 12.9 7.1 3.1 0.16<br>14 nh nh nh nh 11.0 4.7 0.57<br>12 nh nh nh nh 19.8 7.6 1.2<br>10 nh nh nh nh nh 14.0 2.3<br>8 nh nh nh nh nh nh 4.7<br>6 nh nh nh nh nh nh 11.1<br>4 nh nh nh nh nh nh nh<br>2 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Note: 'nh' means no heatsink necessary. The SSR should still be tightened to a surface to ensure optimal thermal dissipation. **12** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Heatsink selection for variants with pre-attached thermal pad (continued)** Thermal resistance [°C/W] of RM1D060D50HT **==> picture [483 x 177] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>50 4.0 3.0 2.1 1.3 0.55 - -<br>45 5.7 4.3 3.0 2.0 1.0 0.12 -<br>40 8.5 6.3 4.5 3.0 1.6 0.47 -<br>35 13.9 10.0 7.0 4.6 2.6 1.0 -<br>30 nh 18.3 12.0 7.6 4.4 1.9 -<br>25 nh nh nh 14.4 7.8 3.4 0.24<br>20 nh nh nh nh 17.2 6.8 1.0<br>15 nh nh nh nh nh 18.2 2.9<br>10 nh nh nh nh nh nh 10.0<br>5 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Thermal resistance [°C/W] of RM1D060D100HT **==> picture [483 x 177] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>100 1.4 1.1 0.71 0.38 - - -<br>90 2.1 1.6 1.1 0.66 0.25 - -<br>80 3.0 2.3 1.7 1.1 0.53 - -<br>70 4.5 3.5 2.6 1.7 1.0 0.26 -<br>60 7.3 5.5 4.1 2.8 1.6 0.63 -<br>50 13.6 9.9 7.1 4.8 2.9 1.3 -<br>40 nh nh 15.1 9.5 5.5 2.6 0.29<br>30 nh nh nh nh 13.8 6.0 1.1<br>20 nh nh nh nh nh nh 3.8<br>10 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Thermal resistance [°C/W] of RM1D200D20HT **==> picture [483 x 177] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>20 3.0 2.4 1.8 1.3 0.82 0.36 -<br>18 4.4 3.5 2.7 2.0 1.4 0.74 0.18<br>16 6.7 5.3 4.1 3.1 2.1 1.3 0.56<br>14 11.2 8.7 6.6 4.9 3.4 2.2 1.1<br>12 nh 16.2 11.7 8.4 5.8 3.7 2.1<br>10 nh nh nh 16.4 10.6 6.8 3.9<br>8 nh nh nh nh nh 13.7 7.1<br>6 nh nh nh nh nh nh 17.7<br>4 nh nh nh nh nh nh nh<br>2 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Note: 'nh' means no heatsink necessary. The SSR should still be tightened to a surface to ensure optimal thermal dissipation. **13** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Heatsink selection for versions with thermal pad (continued)** Thermal resistance [°C/W] of RM1D200D50HT **==> picture [483 x 177] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>50 0.84 0.64 0.44 0.25 - - -<br>45 1.3 1.0 0.76 0.51 0.27 - -<br>40 2.0 1.6 1.2 0.89 0.57 0.27 -<br>35 3.0 2.5 2.0 1.5 1.0 0.60 0.20<br>30 4.9 4.0 3.2 2.4 1.8 1.1 0.57<br>25 9.2 7.3 5.7 4.3 3.1 2.1 1.2<br>20 nh 16.5 12.0 8.7 6.2 4.2 2.5<br>15 nh nh nh nh 15.7 9.3 5.2<br>10 nh nh nh nh nh nh 17.8<br>5 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Thermal resistance [°C/W] of RM1D500D10HT **==> picture [483 x 176] intentionally omitted <==** **----- Start of picture text -----**<br> Surrounding ambient temperature [°C]<br>Load current [A] 20 30 40 50 60 70 80<br>10 10.4 8.0 6.0 4.4 3.0 1.8 0.76<br>9 16.8 12.3 9.0 6.5 4.4 2.8 1.4<br>8 nh nh 14.8 10.1 6.8 4.3 2.3<br>7 nh nh nh 17.4 11.2 6.9 3.7<br>6 nh nh nh nh nh 11.4 6.1<br>5 nh nh nh nh nh nh 10.4<br>4 nh nh nh nh nh nh nh<br>3 nh nh nh nh nh nh nh<br>2 nh nh nh nh nh nh nh<br>1 nh nh nh nh nh nh nh<br>**----- End of picture text -----**<br> Note: 'nh' means no heatsink necessary. The SSR should still be tightened to a surface to ensure optimal thermal dissipation. ## **Thermal data** **==> picture [483 x 139] intentionally omitted <==** **----- Start of picture text -----**<br> RM1D060D3<br>RM1D060D10<br>RM1D060D100 RM1D200D20 RM1D200D50 RM1D500D10<br>RM1D060D20<br>RM1D060D50<br>Max. junction temperature 175°C 175°C 150°C 150°C 150°C<br>Junction to case thermal<br>1.2°C/W 0.6°C/W 0.9°C/W 0.45°C/W 1.5°C/W<br>resistance, Rthjc<br>Case to heatsink thermal<br>resistance, Rthcs5 0.2°C/W 0.2°C/W 0.1°C/W 0.1°C/W 0.2°C/W<br>Case to heatsink thermal<br>resistance (RM1D..HT), Rthcs_HT6 0.55°C/W 0.55°C/W 0.55°C/W 0.55°C/W 0.55°C/W<br>**----- End of picture text -----**<br> 5: Thermal resistance case to heatsink values are applicable upon application of a fine layer of silicon based thermal paste HTS02S from Electrolube between SSR and heatsink. 6: Thermal resistance case to heatsink values for RM1D..HT are applicable for the KK071CUT thermal pad that is preattached from the factory to the RM1D. **14** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** |**Electromagnetic compatibility (EMC) - Immunity**|**Electromagnetic compatibility (EMC) - Immunity**| |---|---| |**Electrostatic discharge (ESD)**|EN/IEC 61000-4-2<br>8 kV air discharge, 4 kV contact (PC2)| |**Radiated radio frequency**|EN/IEC 61000-4-3<br>10 V/m, from 80 MHz to 1 GHz (PC1)<br>10 V/m, from 1 GHz to 2.7 GHz(PC1)| |**Electrical fast transient (burst)**|EN/IEC 61000-4-4<br>Output 5 kHz, 100 kHz: 2 kV (PC2)<br>Input 5 kHz, 100 kHz: 1 kV(PC2)| |**Conducted radio frequency**|EN/IEC 61000-4-6<br>10 V/m,from 0.15 to 80 MHz(PC1)| |**Electrical surge**|EN/IEC 61000-4-5<br>Output, line to line: 1 kV (PC2)<br>Output, line to earth: 1 kV (PC2)<br>Input, line to earth: 1 kV(PC2)| |**Voltage dips**|EN/IEC 61000-4-11<br>0% for 10, 20, 5000 ms (PC2)<br>40% for 200 ms (PC2)<br>70% for 500 ms (PC2)<br>80% for 5000 ms(PC2)| |**Voltage dips, short**<br>**interruptions and voltage**<br>**variations**|EN/IEC 61000-4-29<br>0% for 1, 3, 10, 30, 100, 300, 1000 ms (PC2)<br>30% for 10, 30, 100, 300, 1000 ms (PC2)<br>40% for 10, 30, 100, 300, 1000 ms (PC2)<br>60% for 10, 30, 100, 300, 1000 ms (PC2)<br>70% for 10, 30, 100, 300, 1000 ms (PC2)<br>80% on min. 19.2 VDC for 10, 30, 100, 300, 1000, 3000, 10000 ms (PC2)<br>120% on min. 29.8 VDC for 10,30,100,300,1000,3000,10000 ms(PC2)| |**Electromagnetic compatibility (EMC) - Emissions**|**Electromagnetic compatibility (EMC) - Emissions**| |---|---| |**Radio interference field**<br>**emission (radiated)**|EN/IEC 55011<br>Class B: from 0.15 to 30 MHz| |**Radio interference voltage**<br>**emissions (conducted)**|EN/IEC 55011<br>Class B: from 30 MHz to 1 GHz| Note: Control input lines must be installed together (i.e. a 2 core cable) to maintain products’ susceptability to Radio Frequency interference - Performance Criteria 1 (PC1): No degradation of performance or loss of function is allowed when the product is operated as intended. - Performance Criteria 2 (PC2): During the test, degradation of performance or partial loss of function is allowed. However when the test is complete the product should return operating as intended by itself. **15** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Environmental specifications** |**Operating temperature7**|-40oC to +80oC (-40oF to +176oF)| |---|---| |**Storage temperature**|-40oC to +100°C (-40°F to +212°F)| |**Relative humidity**|95% non-condensing @ 40°C| |**Pollution degree**|2| |**Installation altitude**|0-1000 m. Above 1000 m derate linearly by 1% of FLC per 100 m up to a maximum<br>of 2000 m| |**Vibration resistance**|2g / axis| |**EU RoHS compliant**|Yes| |**China RoHS**|25| 7. Refer to note 1 on page 6 with reference to pick-up voltage at temperatures below -20°C (-4°F). The declaration in this section is prepared in compliance with People’s Republic of China Electronic Industry Standard SJ/ T11364-2014: Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products. ||**Toxic or Harardous Substances and Elements**|**Toxic or Harardous Substances and Elements**|**Toxic or Harardous Substances and Elements**|**Toxic or Harardous Substances and Elements**|**Toxic or Harardous Substances and Elements**|**Toxic or Harardous Substances and Elements**| |---|---|---|---|---|---|---| |**Part Name**|Lead<br>(Pb)|Mercury<br>(Hg)|Cadmium<br>(Cd)|Hexavalent<br>Chromium<br>(Cr(Vl))|Polybrominat-<br>ed biphenyls<br>(PBB)|Polybromi-<br>nated diphenyl<br>ethers (PBDE)| |**Power Unit**<br>**Assembly**|x|O|O|O|O|O| |O: Indicates that said hazardous substance contained in homogeneous materials fot this part are below the limit<br>requirement of GB/T 26572.<br>X: Indicates that said hazardous substance contained in one of the homogeneous materials used for this part is above<br>the limit requirement of GB/T 26572.||||||| ## 这份申明根据中华人民共和国电子工业标准 SJ/T11364-2014：标注在电子电气产品中限定使用的有害物质 |零件名称|有毒或有害物质与元素|有毒或有害物质与元素|有毒或有害物质与元素|有毒或有害物质与元素|有毒或有害物质与元素|有毒或有害物质与元素| |---|---|---|---|---|---|---| ||铅<br>(Pb)|汞<br>(Hg)|镉<br>(Cd)|六价铬<br>(Cr(Vl))|多溴化联苯<br>(PBB)|多溴联苯醚<br>(PBDE)| |功率单元|x|O|O|O|O|O| |O:此零件所有材料中含有的该有害物低于GB/T 26572的限定。<br>X: 此零件某种材料中含有的该有害物高于GB/T 26572的限定。||||||| **16** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Short circuit protection** **==> picture [484 x 54] intentionally omitted <==** **----- Start of picture text -----**<br> Ferraz Shawmut (Mersen) Siba<br>Prospective<br>Part No. short circuit Max fuse Voltage Max fuse Voltage<br>Part number Rating Part number Rating<br>current [kArms] size [A] size [A]<br>[VDC] [VDC]<br>**----- End of picture text -----**<br> |**Part No.**|**Prospective**<br>**short circuit**<br>**current [kArms]**|**Ferraz Shawmut(Mersen)**|**Ferraz Shawmut(Mersen)**|**Ferraz Shawmut(Mersen)**|**Siba**|**Siba**|**Siba**| |---|---|---|---|---|---|---|---| |||**Max fuse**<br>**size [A]**|**Part number**|**Voltage**<br>**Rating**<br>**[VDC]**|**Max fuse**<br>**size [A]**|**Part number**|**Voltage**<br>**Rating**<br>**[VDC]**| ||||||||| |RM1D060D3|5|6|A4J6|300|6.3|5019006.6,3|660| |RM1D060D10||15|A4J15||16|5019006.16|| |RM1D060D20||25|A4J25||25|5019006.25|| |RM1D060D50||70|A4J70||63|5019006.63|| |RM1D060D100||125|A4J125||125|5019006.125|440| |RM1D200D20||25|HSJ25|500|25|5019006.25|660| |RM1D200D50||70|HSJ70||63|5019006.63|| |RM1D500D10||15|HSJ15||16|5019006.16|| **17** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** ## **Connection diagrams** **==> picture [271 x 262] intentionally omitted <==** **----- Start of picture text -----**<br> - + - +<br>V V<br>*<br>D LOAD<br>+<br>+ *<br>LOAD D<br>C**<br>C**<br>2- 1+ 2- 1+<br>4/A2- 3/A1+ 4/A2- 3/A1+<br>- + - +<br>V<br>V<br>**----- End of picture text -----**<br> **Fig. 10** _RM1D connection diagrams_ - A suppressor diode D is required for inductive loads. ** Applicable only to RM1D200.. and RM1D500.. The wiring cables in a DC system act as an inductor and upon switching of the load, voltage transients exceeding the max. SSR voltage may result, leading to SSR damage. The RM1D output is protected with an internal transil, however, this internal component is not intended for repetitive operation as may happen in situations with repetitive voltage transients (for example with high switching frequencies). The internal transil will fail prematurely. Hence, for the **RM1D200D..** and **RM1D500D..** models, when used at switching frequencies >1Hz it is strongly recommended to connect capacitor C across the SSR output as shown in Fig. 10 to protect the SSR output from damages resulting from uncontrolled transients. Capacitor C is not necessary (even at high switching frequencies) if the voltage transients can be controlled and cannot exceed the absolute maximum voltage rating of the SSR. ## **CAUTION!** Specifically for the **RM1D200D50** , if C is required due to high switching frequencies as explained above, the absolute maximum output voltage of the SSR shall be limited to 150 VDC. Suggested C values can be calculated using the online Output protection calculator tool: http://gavazziautomation.com/images/PIM/OTHERSTUFF/SOFTWARE/RM1D-Output%20protection%20calculator.zip **18** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** **==> picture [37 x 37] intentionally omitted <==** **==> picture [483 x 163] intentionally omitted <==** **----- Start of picture text -----**<br> Functional diagram<br>3/A1(+) +1<br>Trigger<br>circuit<br>4/A2(-) -2<br>**----- End of picture text -----**<br> **Fig. 11** _RM1D functional diagram_ ## **Installation** **==> picture [165 x 39] intentionally omitted <==** **----- Start of picture text -----**<br> Thermal paste<br>applicator<br>Thermal paste<br>or thermal pad<br>**----- End of picture text -----**<br> **==> picture [34 x 5] intentionally omitted <==** **----- Start of picture text -----**<br> 1.5 - 2.0 Nm<br>**----- End of picture text -----**<br> **Fig. 12** A fine layer of thermally conductive silicone paste shall be evenly distributed to the base of the SSR before mounting on a heat dissipator. Alternatively a thermal pad may be used. The thermal interface material affects the thermal performance. Make sure that the heatsink is sized properly. **Fig. 13** Tighten screws alternately to 0.5 Nm and then continue to max. 2.0 Nm. **Fig. 14** Mount heatsink with fins in the vertical orientation to guarantee the best possible airflow through the heatsink. **19** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd. **RM1D** ## **Connection Specifications** ~~ep~~ **1+, 2- 3/A1+, 4/A2-** ~~el eee~~ M5, not provided with SSR **Mounting screws (SSR to heatsink)** ~~ee~~ (refer to SRWKITM5X10MM in the References section) ~~a~~ **Mounting torque (SSR to heatsink)** 1.5 - 2.0 Nm (13.3 - 17.7 lb-in) ~~a~~ **Conductors** Use 75˚C copper (Cu) conductors Use 60/75°C copper (Cu) conductors ~~eS~~ **Stripping length, X** 12 mm 8 mm ~~ee~~ **Connection type** M5 scre ~~w w~~ ith captivate ~~d w~~ asher M3 screw with captivated washer **Rigid (solid & stranded)** X 1x 2.5 - 6.0 mm² ~~2x~~ 2.5 - 6.0 mm² 1x 0.5 - 2.5 mm² 2x 0.5 - 2.5 mm² **UR/CSA rated data** 1x 14 - 10 AWG 2x 14 - 10 AWG 1x 18 - 12 AWG 2x 18 - 12 AWG 2x 1.0 - 2.5 mm² ~~ee: eee~~ 1x 1.0 - 4.0 ~~mm~~ ² ~~2~~ x 2.5 - 4.0 mm² 1x 0.5 - 2.5 mm² 2x 0.5 - 2.5 mm² **Flexible with end sleeve** 1x 18 - 12 AWG 2x 18 - 14 AWG 1x 18 - 12 AWG 2x 18 - 12 AWG 2x 14 - 12 AWG ~~Se~~ 2x 1.0 - 2.5 mm² **Flexible** ~~**with**~~ **out end** 1x 1.0 - 6.0 mm² 2x 2.5 - 6.0 mm² - - **sleeve** 1x 18 - 10 AWG 2x 18 - 14 AWG - - 2x 14 - ~~10 A~~ WG ~~eee~~ Pozidrive 2 Pozidrive 1 ~~ee~~ **Torque specifications** 2.4 Nm (21.2 lb-in) 0.5 Nm (4.4 lb-in) ~~ee a~~ **Aperture for termination lug** 12 mm 7.5 mm COPYRIGHT ©2024 Content subject to change. Download the PDF: www.gavazziautomation.com **20** 18/01/2024 RM1D DS ENG Carlo Gavazzi Ltd.
Updated at June 10, 2026
About Novapart
Novapart is a B2B electronic component broker specialising in stock shortages and cost reduction. We source hard-to-find parts and identify compliant alternatives across a catalogue of 540,000+ components from 500+ manufacturers.
Learn more →Stock Shortage Specialist
When a component is unavailable, discontinued or has an unacceptable lead time, we tap into our network of vetted European and Asian distributors to source what you need — without compromising on quality or traceability.
Request a quote →Compliant Alternatives
We identify pin-to-pin, electrically equivalent substitutes that meet the same certifications (RoHS, AEC-Q100, REACH) as your original specification — validated against datasheets, not just part numbers. Often at a lower cost.
BOM Analysis service →