RELV4-16

Features • Universal AC input range: 90-264VAC • Suitable for DALI installation • EN61347-1 certified DALI • Cooling by free air convection • Over current and short circuit protected Power Supply ee Description ~~Lo~~ The RELV4-16 is designed to power a DALI digital lighting control bus. The output is current limited to 200mA, sufficient to power a complete DALI zone with up to 64 addressable DALI devices. The universal input voltage range from 90V to 264VAC enables the RELV4-16 to be used anywhere in the world. Due to its compact design with mounting tabs,  it can be easily and conveniently integrated into any DALI network.  An indicator LED shows Power OK and DALI bus traffic to aid installation and commissioning. The RELV4-16 comes with a 5 year warranty. 

**==> picture [149 x 13] intentionally omitted <==**

**----- Start of picture text -----**<br>
AC/DC Converter<br>**----- End of picture text -----**<br>


**RELV4-16** 

**DALI Bus** % **Power Supply** 

## Selection Guide 

|Part|Input|Input Current|Output|Output|Output|Efficiency|
|---|---|---|---|---|---|---|
|Number|Voltage Range|(@ 115VAC)|Voltage|Current|Power|typ.|
||[VAC]|[mA]|[VDC]|[mA]|[W]|[%]|
|RELV4-16|90-264|110|16|200|3.2|68|



## Specifications (measured @ Ta= 25°C and 230VAC) 

|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|
|---|---|---|---|---|
|Parameter|Condition|Min.|Typ.|Max.|
|Input Voltage Range||90VAC|230VAC|264VAC|
|Output Voltage Range|full load||16VDC||
|DC Voltage Range||13.6VDC||18.4VDC|
|Inrush Current|115VAC<br>230VAC|||21A<br>42A|
|DC Output Current Range|13.6VDC<br>18.4VDC||240mA<br>180mA||
|Start-up Time|115VAC<br>230VAC|||1s<br>0.5s|
|Rise and Fall Times||10µs||100µs|
|Input FrequencyRange||47Hz||63Hz|
|Ripple and Noise(1)||||150mVp-p|
|Notes:<br>Note1: Ripple and Noise is measured @20MHz BW by using a 12“ twisted pair-wire terminated with<br>0.1µF & 47µF parallel capacitor|||||



EN61347-1 certified EN61347-2-11 certified EN55015 certified EN61547 certified 

Note1: Ripple and Noise is measured @20MHz BW by using a 12“ twisted pair-wire terminated with 0.1µF & 47µF parallel capacitor 

|REGULATIONS|REGULATIONS|REGULATIONS|
|---|---|---|
|Parameter|Condition|Value|
|Output Accuracy (2)||±15% typ.|
|Current Tolerance||+20% / -10% typ.|
|Notes:<br>Note2: Voltage Tolerance includes line regulation, load regulation and set-up tolerance|||



REV.:  1/2019 

L-1 

**www.recom-power.com** 

## **RELV4-16** 

## **AC/DC Converter** 

## **Series** 

Specifications (measured @ Ta= 25°C and 230VAC) 

**==> picture [519 x 96] intentionally omitted <==**

**----- Start of picture text -----**<br>
|||||
|---|---|---|---|
|PROTECTION|
|Parameter|Condition|Value|
|Short Circuit Protection (SCP)|with terminal switch (80°C typ.)|Limiting Current Mode|
|Over Current Protection (OCP)|240mA max.|Limiting Current Mode|
|Isolation Voltage|3.75kVAC / 1 Minute|
|Isolation Resistance|500VDC at 25°C|100M|W|
|Isolation Grade|Double Isolated for SELV Output|

**----- End of picture text -----**<br>


ENVIRONMENTAL 

**==> picture [522 x 296] intentionally omitted <==**

**----- Start of picture text -----**<br>
||||||||||
|---|---|---|---|---|---|---|---|---|
|Parameter|Condition|Value|
|Operating Temperature Range|-20°C to +45°C|
|Max. Case Temperature|+65°C|
|Operating Humidity|non-condensing|20% to 90% RH|
|IP Rating|IP20|
|Vibration|10-500Hz, 2G, 60Min. along X, Y and Z|
|MTBF|MIL-HDBK-217F, at 25°C|200 x 10³ hours|
|Derating Graph|
|100|
|80|
|60|
|40|
|20|
|0|
|-20|-10|0|10|20|30|40|50|60|
|45|
|Ambient Temperature [°C]|

**----- End of picture text -----**<br>


SAFETY AND CERTIFICATIONS Certificate Type (Safety) File Number Standard Lamp Controlgear - Part 1: General and safety requirements EN61347-1:2015 Lamp Controlgear - Part 2-11: Particular requirements for miscellaneous IEC61347-2-11:2001, 1st Edition electronic circuits used with luminaires EN61347-2-11:2001 RoHS 2+ RoHS 2011/65/EU + AM2015/863 ~~——S~~ continued on next page **www.recom-power.com** REV.:  1/2019 L-2 

**RELV4-16 Series** 

**AC/DC Converter** 

|Specifications(measured @ Ta= 25°C and 230VAC)<br>~~eee)~~|~~eee)~~|~~eee)~~|
|---|---|---|
|EMC Compliance|Conditions|Standard / Criterion|
|Limits and methods of measurement of radio disturbance characteristics of electrical<br>lighting and similar equipment||EN55015:2013 + A1:2015|
|Limitations on the amount of electromagnetic interference allowed from digital and<br>electronic devices||FCC 47 CFR Part 15|
|Equipment forgeneral lighting purposes – EMC immunityrequirements||EN61547:2009|
|ESD Electrostatic discharge immunity test|Air ±2, ±4, ±8kV<br>Contact ±2,±4kV|IEC61000-4-2:2008, Criteria A|
|Radiated, radio-frequency, electromagnetic field immunitytest|3V/m(80-1000MHz)|IEC61000-4-3:2006, Criteria A|
|Fast Transient and Burst Immunity|AC Power Port: ±0.5kV|IEC61000-4-4:2012, Criteria A|
|Surge Immunity|AC Power Port: L-N ±0.5kV, ±1kV|IEC61000-4-5:2005, Criteria A|
|Immunityto conducted disturbances, induced byradio-frequencyfields|AC Power Port: 3V|IEC61000-4-6:2008, Criteria A|
|Power Magnetic Field Immunity|50, 60Hz, 3A/m|IEC61000-4-8:2009, Criteria A|
|Voltage Dips and Interruptions|Voltage Dips 30%|IEC61000-4-11:2004, Criteria B|
|Voltage Dips and Interruptions|Voltage Interruptions >95%|IEC61000-4-11:2004, Criteria B|
|Limits of Harmonic Current Emissions||EN61000-3-2:2014|
|Limits of Voltage Fluctuations & Flicker||EN61000-3-3:2013|



DIMENSION and PHYSICAL CHARACTERISTICS ~~Ce a~~ Parameter Type Value PCB plastic resin with fibreglass, (UL94 V-0) Material case plastic, (UL94 V-2) ~~**e** e ee~~ Dimension (LxWxH) ~~s~~ 112.0 x 42.0 x 24.0mm ~~I~~ Weight 80g typ. Dimension Drawing (mm) 112.0 ~~a~~ 6a ~~DA+~~ DA - 57.0 tc LED '® @ AC N ~~=e~~ AC L Screw Terminal Information Function Wire Diameter AWG FC 100.0 AC N 0.5-1.5mm² 14~26 AC L 0.5-1.5mm² 14~26 DA+ 0.5-1.5mm² 14~26 24.0 DA0.5-1.5mm² 14~26 

wire stripping length: 5~6mm tc= case temperature measuring point FC= fixing centers Tolerance: xx.x=  ±0.5mm xx.xx= ±0.35mm 2 mounting screws are included 

REV.:  1/2019 

L-3 

**www.recom-power.com** 

**==> picture [162 x 24] intentionally omitted <==**

**----- Start of picture text -----**<br>
RELV4-16<br>**----- End of picture text -----**<br>


## **AC/DC Converter** 

**==> picture [66 x 16] intentionally omitted <==**

**----- Start of picture text -----**<br>
Series<br>**----- End of picture text -----**<br>


Specifications (measured @ Ta= 25°C and 230VAC) 

INSTALLATION and APPLICATION ~~et~~ 

**==> picture [44 x 9] intentionally omitted <==**

**----- Start of picture text -----**<br>
Connection<br>**----- End of picture text -----**<br>


**==> picture [233 x 237] intentionally omitted <==**

**----- Start of picture text -----**<br>
L N<br>DA+<br>DA -<br>RELV4-16 LED<br>AC N<br>AC L<br>DA+<br>Device 001<br>DA-<br>i DA+<br>Device 002<br>DA-<br>i DA+<br>Device 00n<br>DA-<br>——<br>200mA limited<br>**----- End of picture text -----**<br>


|PACKAGING INFORMATION|PACKAGING INFORMATION|PACKAGING INFORMATION|
|---|---|---|
|Parameter|Type|Value|
|PackagingDimension(LxWxH)|cardboard box|256.0 x 124.0 x 84.0mm|
|PackagingQuantity||10pcs|
|Storage Temperature Range||-40°C to +80°C|
|Storage Humidity|non-condensing|10% - 90% RH|



The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  1/2019 

L-4 

**www.recom-power.com**