RELI-DA01/R

Features • Built-in relay to turn ON/OFF drive completely (zero standby current) **AC/DC Converter** • IEC-62386 part 206 compliant DALI • Over voltage and short circuit protection • Selectable output for PWM / DC 0-10V / DC 1-10 Converter • Screw-less connectors, easy to install **RELI-DA01/R** ee ~~—~~ Description **1.6W** The  RELI-DA01/R  is  a  DALI  to  analog  control  signal  interface  which  is  compliant **DALI** DS Yarran with  the  DALI  IEC62386 standard. The output is selectable between  0-10V and 1-10V or PWM (1) and is compatible with all RECOM dimmable LED drivers as well as other manufacturer’s products. The output can control several LED drivers, allowing the lighting in a whole **Converter** room or office to be dimmed with just one DALI  address. A built-in relay can be used to switch off the LED drivers under software control to give zero no-load consumption. The interface is universal AC powered (110VAC, 230VAC or 277VAC). 

## Selection Guide 

Part Input typ. Power max. DALI Bus Dimming DALI Number Voltage Range Consumption Power Consumption Output Standard [VAC] [W] [mA] IEC62386 PWM[(1) ] RELI-DA01/R 90-290 1.6 2 DC 0-10V Part-206 DC 1-10V Notes: 

Note1: PWM is not included in the IEC62386 standard 

## Specifications (measured @ ta= 25°C and nominal input voltage) 

EN61547 certified EN61347-1 certified EN61347-2-11 certified IEC62386-206 compliant EN55015 compliant 

|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|BASIC CHARACTERISTICS|
|---|---|---|---|---|
|Parameter|Condition|Min.|Typ.|Max.|
|Input Voltage Range||90VAC|230VAC|290VAC|
|Input FrequencyRange||50Hz||60Hz|
|Power Consumption|||1.6W|3W|
|Dali Bus Current Consumption||||2mA|
|RelaySwitch|1 Channel|2A cont.||70A inrush|



|REGULATIONS|REGULATIONS|
|---|---|
|Parameter|Value|
|DC 0/1-10V Output Accuracy|±3% max.|



|PROTECTION|PROTECTION|PROTECTION|
|---|---|---|
|Parameter|Condition|Value|
|Short Circuit Protection(SCP)|Dimmingoutput|continuous, current limited to 240mA|
|Over Voltage Protection(OVP)|Dali connector, Zener Diode clamp|24VDC|



REV.:  2/2019 

L-1 

**www.recom-power.com** 

**Series** 

## **RELI-DA01/R** 

## **AC/DC Converter** 

Specifications (measured @ Ta= 25°C and nominal input voltage) 

**==> picture [525 x 311] intentionally omitted <==**

**----- Start of picture text -----**<br>
ENVIRONMENTAL<br>a<br>Parameter Condition Value<br>a<br>Ge Operating Temperature Range free air convection -20°C to +40°C<br>a Maximum Case Temperature  +46°C<br>De Operating Humidity non-condensing 20% to 90% RH<br>Ge IP Rating IP20<br>a MTBF MIL-HDBK-217F, G.B. 200 x 10³ hours<br>Derating Graph<br>100 PP<br>80 TTT<br>T yy<br>60 TETTy<br>TEETT<br>4020 EERE<br>0<br>-20 PTET -10 0 10 TTT 20 30 40 50 60<br>Ambient Temperature [°C]<br>Output Power [%]<br>**----- End of picture text -----**<br>


|SAFETY AND CERTIFICATIONS<br>~~ce~~|SAFETY AND CERTIFICATIONS<br>~~ce~~|SAFETY AND CERTIFICATIONS<br>~~ce~~|
|---|---|---|
|Certificate Type(Safety)<br>~~a~~|File Number<br>~~a~~|Standard<br>~~a~~|
|LampControlgear - Part 1: General and safetyrequirements<br>~~OO~~|~~OO~~|EN61347-1:2015<br>~~OO~~|
|Lamp Controlgear - Part 2-11: Particular requirements for miscellaneous electronic<br>circuits used with luminaires<br>~~OO~~<br>~~ee~~|~~OO~~<br>~~ee~~|IEC61347-2-11:2001, 1st Edition<br>EN61347-2-11:2001<br>~~OO~~<br>~~ee~~|
|Digital addressable lightinginterface - Part 206: Particular requirements for controlgear<br>~~ee~~<br>~~DO~~|~~ee~~<br>~~DO~~|IEC62386-206:2009<br>~~ee~~<br>~~DO~~|
|RoHS 2+<br>~~DO~~<br>~~a~~|~~DO~~<br>~~a~~|RoHS 2011/65/EU + AM2015/863<br>~~DO~~<br>~~a~~|
||||
|EMC Compliance<br>~~OC~~|Conditions<br>~~OC~~|Standard / Criterion<br>~~OC~~|
|Limits and methods of measurement of radio disturbance characteristics of electri-<br>cal lighting and similar equipment<br>~~OC~~<br>~~ee~~|~~OC~~<br>~~ee~~|EN55015:2013 + A1:2015<br>~~OC~~<br>~~ee~~|
|Equipment forgeneral LightingPurpose EMC ImmunityRequirements<br>~~ee~~|~~ee~~|EN61547:2009<br>~~ee~~|
|ESD Electrostatic discharge immunitytest<br>~~OG~~|Air ±2, ±4, ±8kV, Contact ±2, ±4kV<br>~~OG~~|IEC61000-4-2:2008, Criteria A<br>~~OG~~|
|Radiated, radio-frequency, electromagnetic field immunitytest<br>~~OG~~<br>~~OO~~|3V/m(80-1000MHz)<br>~~OG~~<br>~~OO~~|IEC61000-4-3:2006, Criteria A<br>~~OG~~<br>~~OO~~|
|Fast Transient and Burst Immunity<br>~~OO~~<br>~~OC~~|AC Power Port: ±1.0kV<br>~~OO~~<br>~~OC~~|IEC61000-4-4:2012, Criteria A<br>~~OO~~<br>~~OC~~|
|Surge Immunity<br>~~OD~~|AC Power Port: L-N ±0.5kV<br>~~OD~~|IEC61000-4-5:2005, Criteria A<br>~~OD~~|
|Immunityto conducted disturbances, induced byradio-frequencyfields<br>~~a~~|AC Power Port: 3V<br>~~G~~|IEC61000-4-6:2008, Criteria A<br>~~G~~|
|Power Magnetic Field Immunity<br>~~a~~|50Hz, 3A/m<br>~~a~~|IEC61000-4-8:2009, Criteria A<br>~~a~~|
|Voltage Dips and Interruptions<br>~~OG~~|Voltage Dips 30%<br>~~OG~~|IEC61000-4-11:2004, Criteria B<br>~~OG~~|
|Voltage Dips and Interruptions<br>~~pe~~|Voltage Interruptions >95%<br>~~pe~~|IEC61000-4-11:2004, Criteria B<br>~~pe~~|
|Limits of Harmonic Current Emissions<br>~~OD~~|~~OD~~|EN61000-3-2:2014<br>~~OD~~|
|Limits of Voltage Fluctuations & Flicker<br>~~a~~|~~C~~|EN61000-3-3:2013<br>~~C~~|



REV.:  2/2019 

L-2 

**www.recom-power.com** 

## **RELI-DA01/R** 

## **AC/DC Converter** 

## **Series** 

Specifications (measured @ Ta= 25°C and nominal input voltage) 

DIMENSION and PHYSICAL CHARACTERISTICS ~~es~~ Parameter Type Value PCB plastic resin with fibreglass, (UL94 V-0) Material ~~a~~ case plastic, (UL94 V-2) ~~ee~~ Dimension (LxWxH) ~~O~~ 150.0 x 40.0 x 28.0mm ~~eG~~ Weight 100g ±10% Dimension Drawing (mm) 

VAC L VAC N DA DA A ~~day~~ B ON/OFFPWM/ 1-10V(Default OFF) l +- ~~ac~~ e ~~Git~~ 130.0 ~~r—OTC‘CY J~~ 150.0 ~~1~~[EE] 

Connection via Screw Terminal # Function Solid Wire Stranded Wire AWG 1 VAC in (N) 0.75-1.5mm² 0.75-1.5mm² 18-16 2 VAC in (L) 0.75-1.5mm² 0.75-1.5mm² 18-16 3 A 0.75-1.5mm² 0.75-1.5mm² 18-16 wire stripping length: 5mm 4 B 0.75-1.5mm² 0.75-1.5mm² 18-16 FC = fixing centers 5 DA+ 0.75-1.5mm² 0.5-1.5mm² 21-16 Tolerance:  xx.x=  ±1.0mm xx.xx= ±0.5mm 6 DA0.75-1.5mm² 0.5-1.5mm² 21-16 7 + 0.75-1.5mm² 0.5-1.5mm² 21-16 8 - 0.75-1.5mm² 0.5-1.5mm² 21-16 

ON: PWM 10V (Default active high) OFF: DC 1-10V (Default DC) Indicator LED DC0-10V (software control) flashes with DALI Signal Delivery setting: Output Signal: DC 1-10V Dimming Curve: Logarithmic PWM active high 

REV.:  2/2019 

L-3 

**www.recom-power.com** 

**AC/DC Converter** 

## **RELI-DA01/R** 

## **Series** 

~~Lee~~ Specifications (measured @ Ta= 25°C and nominal input voltage) eee INSTALLATION and APPLICATION ~~|~~ DALI Connection 

**==> picture [373 x 279] intentionally omitted <==**

**----- Start of picture text -----**<br>
N 230VAC 50Hz 1/N/PE A1<br>DALI Bus<br>L Supply<br>PE<br>A2<br>VAC VAC LN RELI-DA01/R DA<br>AB ON/OFFPWM/ 1-10V(Default OFF) DA+- |<br>10V PWM or DC 0/1-10V<br>A3 +Vout<br>VAC N<br>-Vout<br>RACD60-2500A<br>VAC L -Dim<br>+Dim<br>Sn<br>VAC N An<br>RACD60-2500A<br>VAC L -Dim<br>+Dim<br>DALI bus<br>DALI<br>ON Output<br>**----- End of picture text -----**<br>


## DALI Declaration for Factory Variables (for Part 206) 

|Variable|Default Value|Reset Value|Received Command|Range of Validity|
|---|---|---|---|---|
|DimmingCurve|0|no change|0|0-1; (2-255 reserved)|
|Converter Features|0011 a101|no change|0011 a101|53;61|
|Failure Status|0000 0000|no change|0000 0000|0 - 255|
|Converter Status|0000 0000|no change|0000 0000|0 - 255|
|Extended Version Number|1|no change|1|factory-defined|
|Device Type|5|no change|5|factory-defined|
|Physical min Level|1|no change|1|1 - 253|



a = 0 Relay function dissabled; a = 1 Relay function enabled 

## DALI Command Set 

The RELI-DA01/R has been accepted by agDALI as conforming to the DALI standard for Device Type 5 (IEC 62386-206). It supports all relevant commands of the defined command set. 

|Command Number|Command Name|Function|
|---|---|---|
|-|DIRECT ARC POWER|set directlythe light level|
|0|OFF|switch OFF the light|
|1|UP|dim upthe light|
|2|DOWN|dim down the light|
|5|RECALL MAX|recall the maximum light level|
|6|RECALL MIN|recall the minimum light level|



Not supported commands include the “QUERY LAMP FAILURE” and the “QUERY LAMP POWER ON”. Additionally the features to disable the Relay Switch, set the output to PWM, change the PWM from activehigh to active-low are additional and not tested by DALI (refer to the RELI-DA01/R instruction manual). 

continued on nex page 

REV.:  2/2019 

L-4 

**www.recom-power.com** 

**AC/DC Converter** 

**Series** 

## **RELI-DA01/R** 

~~|~~ Specifications (measured @ Ta= 25°C and nominal input voltage) 

Recommended LED Drivers, DAL-Bus Power Supplies and DALI Master AC/DC LED Driver DC/DC LED Driver DALI Master RACD20-xxxD RCD24-xxx custom commands tested with DALI-USB RACD60-xxxxA RCD48-xxx Tridonic Osram (IEC62386 compatibility RACD45-xxxxA RBD12-xxx confirmed by DIAL ag using Prohibit Tester) RACD100-xxxxA RACD150-xxxxA *Software masterCONFIGURATOR V2.6.8.1005 Tridonic Notes: 

Note2: For one DALI Converter (RELI-DA01/R) up to 6pcs of RECOM AC/DC LED-Drivers with 3in1 dimming can be connected 

**==> picture [526 x 409] intentionally omitted <==**

**----- Start of picture text -----**<br>
DIMMING<br>|<br>GG Parameter Condition Min. Typ. Max.<br>GO PWM Frequency 500Hz<br>High Voltage 9.5VDC 10VDC 10.5VDC<br>PWM Level<br>a Low Voltage 0VDC<br>eG PWM and DC Output Current Sourcing -5mA 60mA<br>Default-Setting Log. 1-10V Dimming<br>10<br>ee DALI-Command<br>ee Logarithmic Dimming: 1-10V<br>a<br>6  Recall MIN Level<br>257  DATA Transfer Register (DTR) / Value: 0 dec<br>272  Enable Device Type X / Value: 5 dec<br>cceeceney<br>224  Query APP EXT Cmd224<br>Pfa 224  Query APP EXT Cmd224<br>272  Enable Device Type X / Value: 5 dec<br>1 = 229  Query APP EXT Cmd229<br>a 229  Query APP EXT Cmd229<br>0 50 100 150 200 250<br>Internal switch: OFF<br>Dimming Digits [1-254]<br>PACKAGING INFORMATION<br>Parameter Type Value<br>Packaging Dimension (LxWxH) cardboard Box 248.0 x 161.0 x 88.0mm<br>Packaging Quantity 10pcs<br>Storage Temperature Range -40°C to +80°C<br>Storage Humidity non-condensing 10% - 90% RH<br>Output Voltage [V]<br>**----- End of picture text -----**<br>


The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM’s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. 

REV.:  2/2019 

L-5 

**www.recom-power.com**